How to add a simple password sign-in?

I'd like to add a simple password sign-in in order for users to access a non-public page on a site. I'm a litle confused about exactly how to do this and am also wondering if it's possible to have just a field for password but not username?
Thanks,
John

Thanks Murray. Was hoping for a more integrated looking solution but this works.
Best Regards,
John

Similar Messages

How to add a new password policy

This must be simple, but appearantly nobady has conceeded:
"how does one add a NEW password policy to the OID?"
I need this functionality, because I want to enforce the following rules in my SSO application:
- 99% of the users may have passwords that never expire
- 1% (say 5 or 6) users must have passwords that do expire, because they are super users and we want to minimize the risk of their passwords getting in the wrong hands.
I feel almost embarrased to post this question, but I really cannot find any example or documentation that shows me how to add a new password policy.
Is their any way to do this in OID?

Hi,
Can you please provide exact steps those were used to create password policies for users.
I opened a Tar with metalink on this , and they told me that this way is not supported by Oracle.
So if you can please help me with this it will be great. See the details about the Tar as below:
11-AUG-05 21:41:42 GMT
QUESTION
=========
How to create or add a password policy for users in OID according to forum 833683 ?
RESEARCH
=========
- Re: How to add a new password policy
- Oracle Internet Directory Administrators Guide Release 9.2 Chapter 17 "Password Policies"
ANSWER
=======
Oracle Technical Support does not support to create password policies for specific users. Orac
le Internet Directory provides a Password Policy for each subscriber created (al
so known as Realm) or for the entire DIT.
eos (end of section)
I talked with the customer and she agreed to close this TAR.
Best Regards,
Hector Viveros
Oracle Identity Management
@HCL
.

How to add a simple drop shadow to video clip

Ok, so perhaps I'm just looking in all the wrong places, or perhaps it was an oversight in the initial release of FCP X....but for the life of me, I cannot find where to add a simple drop shadow (in this case, for actual video footage. I haven't looked into shadows for text). I have keyed footage (BTW, bravo Apple on the chromakeyer in FCP X) that I need to add a drop shadow to in order for it to blend nicer with the background footage. Is this feature missing? Or am I simply not looking in the right place?

Same answer as your other recent thread.

How to add a simple commentary, no video?

Hopefully this is a simple one.
I have an iDVD project where I have 3 independent ballet movies. I need to add a commentary for each one that can be clicked on from the main menu to introduce each piece. No video, just a short spoken introduction.
I'm planning to record each commentary in Garageband.
How would I go about this, none of my iDVD books mention such an approach.
Thanks,
JT

sounds like a charming project..
but... DVDs usually contain video, are watched on a TV ..
so: what does your audience see, while listening?
black?
here comes your content: create a black clip in iM and add your commentary..
me personally would prefer a 'moving' image, which tells me, my DVDplayer isn't broken.. add some 'art' .. a nice Ken Burns to some Ballerina shot? or, 'paint' in some pic processor the word 'dance' and manipulate to a piece of art.. finally, some plug-ins from geethree.com or other sources offer 'generic moving backdrops' ... iTunes Visualizer-like ..

HT201184 I do not know the sign-in name & password on my eMac to be able to use it. How can I change the password & sign-in in order to use the computer?

I do not know the sign-in & password to able to use my eMac computer. How can I change the info so I can use it?

OS X: Changing or resetting an account password

How to add comma and dollar sign that places automatically in input text field

I have this ROI calculator which has several text input field
on frame one with calculate and reset buttons. When a user enters
numerical values in the text field, and jumping to the next field,
I want the input text filed be updated with dollar sign and with
comma.
Next when they hit "ENTER" key or click "Calculate ROI"
button, all the input text fields on frame 2 as a result of
calculations be updated with dollar sign and comma. I also need
that once the comma sign is assigned then it would not add any more
even if user presses the button. Can someone help me in
this?

If you want to Set the Comma when you Switch to next Text
Field
Use onKillFocus / onSetFocus Functions.
to restrict multiple comma, Before Adding comma use
myText.text =
myText.text.split(",").join("").split("$").join("");
So this will give you the value without Comma and Dollar
symbol, Now add the Comma and dollar.
or you need to use a Flag for onChange Event.

How to add a simple hyperlink field in Apex

Version : 4.1.0
Hi There,
I have a simple requirement and was trying to find the best option. I was drawing a blank.
I need to show one single field "Overview" on an Apex page at the top which when clicked opens a new page and goes to the underlying URL.
Now I have to add this field after my existing radio buttons which is the top "parameter" region. What is the best way to do this.
I guess we could do this by creating a new HTML region if I am not wrong. But wondering if we can do this maybe using a Display item or something. Where we use a before regions process and populate the hyperlink and display the "Overview" text which the user can click on
Any suggestions!
Thanks,
Ryan

ryansun wrote:
Version : 4.1.0
Hi There,
I have a simple requirement and was trying to find the best option. I was drawing a blank.
I need to show one single field "Overview" on an Apex page at the top which when clicked opens a new page and goes to the underlying URL.
Now I have to add this field after my existing radio buttons which is the top "parameter" region. What is the best way to do this.
I guess we could do this by creating a new HTML region if I am not wrong. But wondering if we can do this maybe using a Display item or something. Where we use a before regions process and populate the hyperlink and display the "Overview" text which the user can click onThe layout you are attempting to describe is not clear. "at the top"..."after my existing radio buttons"..."the top 'parameter' region". This is all subjective. You know what you mean, but we've never seen this page.
At the very least you need to provide a more objective description so others can attempt to visualize or reproduce this. This requires the following information:
<li>Theme
<li>Page template
<li>Region position and template of the "the top 'parameter' region"
An example on apex.oracle.com is so much eloquent in these situations...
As a rough guess, I'd probably create link HTML in the Post-Element Text of the radio group item, or the Region Footer of the "top 'parameter' region".

How do I sign my VB / VS 2010 based shared COM add-in for Excel so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?

My COM add-in is developed using VS 2010 and VB. It's a shared COM add-in (not VSTO) and it works with Excel 2007 - 2013. My installer is signed with a code signing certificate but it would appear that my add-in's .dll should also be signed if the user has
checked the "Require application add-ins to be signed by a trusted publisher" option.
The "Sign the assembly" option is checked in my add-in's VB -> My Project -> Signing. I have a .snk file selected which I seem to recall generating 6 or 7 years ago when I ported the COM add-in from VB6 to .NET.
I have an up-to-date Comodo code signing certificate (a pfx file called MyCompanyCodeSigningCertificatePrivateKey.pfx) which I purchased to use with the installer and was wondering if and how I could use this.
I tried selecting my pfx file in the My Project -> Signing -> "Choose a strong name key file" dialog. It made a copy of the pfx file in my project folder but when I tried to build the project, I got the following error:
Error 1 Cannot import the following key file: MyCompanyCodeSigningCertificatePrivateKey.pfx. The key file may be password protected. To correct this, try to import the certificate again or manually install the certificate to the Strong Name CSP with the
following key container name: VS_KEY_C0B6F251F0FB6016
After a little research, I found out I might be able to use signtool to sign the dll in a post-build step.
I added the following command to the post-build event, before the command I use to regasm the assembly.
"path to signtool\signtool" sign /f "MyCompanyCodeSigningCertificatePrivateKey.pfx" /p "xxxx" /v "$(TargetPath)"
When I built the project, the dll appeared to get signed (the output window showed a bunch of confirming text as well as "Successfully signed: c:\MyAddIn\bin\Release\MyAddIn.dll") but the next step in the post-build (regasm myaddin.dll /codebase)
issued a warning RA0000 (see below) but reported "Types registered successfully".
Here's the message I get from regasm, even though the output window says the dll was sucessfully signed:
RegAsm : warning RA0000: Registering an unsigned assembly with /codebase can cause your assembly to interfere with other applications that may be installed on the same computer. The /codebase switch is intended to be used only with signed assemblies. Please give your assembly a strong name and re-register it.
Types registered successfully
I'm not using a shim if that makes a difference.
How do I sign my add-in so it loads when the user has checked "Require application add-ins to be signed by a trusted publisher"?
Any tips would be appreciated.

Hello,
Why do you need to use the regasm utility from the post-build action?
There is a difference between signing the assembly with a strong name and digital signature. The
How to: Sign an Assembly with a Strong Name article in MSDN explains how to sign an assembly with a strong name (.snk). See
How to digitally sign a strong named assembly for adding a digital signature.
You may also find the
What's the Difference, Part Five: certificate signing vs strong naming article helpful.

Ipad 2 safari - how to add back a deleted website to autosaved passwords

I deleted a website from the list of websites in safari with autosaved passwords. I can't find out how to add it back in.

I may be interpreting your question incorrectly, so I have two suggestions.
if the information is no longer in the settings for Safari, you should just be able to go back to the website, sign in again and you should be prompted to save the info in Keychain. Accept that option and it will be stored in your settings.
If you never saved the website in the past, Go to Settings>Safari>Passwords & Autofill>Saved Passwords. Enter your passcode. Find the website/passcode that you didn't save and delete it via the Edit button. Then go back to the website that you want to use Autofill for, sign in again and then see if you get the option to save it again.

My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help :(

My number 5 key is not working and my password has a number 5 in it. How can I change my password when I'm signed in on another account or as guest user? I need help

- If the "other" account has administrative privileges then just try changing the PW for your account.
- Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities
- If the problem is due to a bad KB just get a new KB

How do I add a simple, 1D, uneditable bar code to a PDF?

I would like to add a simple 1D bar code to an existing PDF form. The bar code is used to identify me as the issuer of the PDF form and would not be edited by anyone else. If it is not possible to do in Adobe X Pro, is there a third-party software that would do the trick? Thanks.

Create a Form Field
When finish get out of Forms editing.
Place the Bar code in the field.
now go back to Forms Editing (From Tool bar)
Click on Field and hold down Control Key
Choose Make Read only or Read only.
Now see if you can password Protect the field Or Document and allow everything to be filled out except this field.
* Well I just tried to Password protect and individual cell but evidently I can't. Might be something I am not doing
If its not its not very useful.

HT5439 i can't access my university anyway, how can i add username and password?

i try to use this solution to apply my university proxy, but it dodn't work. Can u suggest me more about how can i add username and password?

You should be able to use the OpenVPN Connect app running on your iPad to connect your iPad to the VPN directly. It is an official OpenVPN client for iOS devices.
In what way is it "not compatible"? Have you tried it? Tunnelblick is an OpenVPN client, so your school's VPN is using the OpenVPN protocol. That means any OpenVPN client should be able to access it. (It is possible, but unlikely, that your school uses encryption that is not available on the iPad, but that would be very unusual.)
Otherwise, a remote control app on your iPad would let you control your Mac at home. "Back to My Mac", for example, would allow you to control your Mac remotely. The tricky part of this is that usually a VPN is set up to send all Internet traffic via the VPN server, and I'm not sure how that would work with "Back to My Mac".

HT201412 how can you reset your password to simple 4 digit format?

How can your reset your password to simple format without reseting the whole phone?

Turn off passcode, then re-enable such. Note: if you have an Exchange account, the requirement to use a non-simple passcode can be enforced by a profile installed on your phone when setting up the Exchange account.

How can I add a security password to an Airport extended network?

I have an Airport Extreme network extended with an Airport Express and an older Airport Extreme. Everything works fine as is. I want to add a security password to the network but when I do, the two extending base stations appear in Airport Utility with an alert triangle next to them and when I select each of them, it asks if I want to "foget" that device. I do not want to forget those devices as they are extending the range of the network, I just want a password on the entire network for privacy. How do I accopliish this while still maintaining the extended network?

Conversely, set the security feature for each of the extending base stations first, then set the security for the main base sation. The extending base stations will go offline. Then back on once the main base station is configured with the same password as the two extenders.
(Found this on an older post about the same issue.)

How to add currency sign?

Hi,
I have a group currency key figure in my report. I want to add $ sign in front of the amount for ex. 12550 it should show as $12550.
How to add currency sign $ in front of the aount.
Pts for ans.
Regards,
Shri.

Hi,
You can enable currency in the reporting output using following steps:
Query properties> Display> select Display scaling factors for key figures.
but using this option currency($) will be displayed after the amount. it means key figure values will be displayed like 300$, 800$.
hope it helps..
regards,
raju

How to add a simple password sign-in?

Similar Messages

Maybe you are looking for