How to add budget cost centre wise ?

Hi Experts,
I have created 5 dimentions and various cost centres with in each dimentions.
dimenstions are as follows.
1.Product
2.Employee
3.Department
4.Zone
5.Branch
Now I want to enter budget by profit/cost centres defined within this dimentions and then wish to see various reports like Balance Sheet / Profit & Loss Report by filtering on Dimension.
Thanx
Prashant Kapoor

Hello ..
When you talk about size, you refer to segments of general ledger accounts? ..
If so, the logic of the budgets will allow this because this is precisely geared to the general ledger accounts.
Otherwise, it is not possible to my knowledge, filter under a different concept.
Best regards,

Similar Messages

  • How to Add the cost centre  in the KSBB report

    Hi Experts,
    How can we add cost centre in KSBB report. Is it possible to add? if yes could any one guide me how to add the cost centre in KSBB report?
    waiting for your replies,
    Regards

    Hi,
    I see only three possible explanations:
    a) no data on this cost centre
    b) authorizations
    c) 'hard-coded' filter in the relevant report (only if it's user-developed report)
    Regards,
    Eli

  • How can i see cost centre wise employee level salary breakdown for each month ? can anybody help me.

    plz anyone help me.

    thanks, Nguyen. can i get a employee salary breakdown for each month with this tcode.

  • Cost centre wise budgeting

    Hi All,
    Can any one explain how to do budgeting cost centre group wise?
    Thanks in advance,
    Manisha

    I have a question.
    The purpose of the cost centre is to control the cost at different levels. If the budgeting is not done at the cost centre level but at the cost centre node than is it better to make the node as the cost centre instead of the multiple cost centre below it.
    E.g in the present scenerio the budgeting is done at cost centre node level. There are 7 cost centre below this node. Now one of the cost centre is taken as the representative and the major expenses as Power and Direct labor are put in this. Other petty expenses are directly put in the respective cost centre.
    Is this a good pactice. Also at present they are not having full CO implementation. They do not have the assessment and distribution cycles.
    Please suggest that if there is large no of Cost centre than what will be the impact when complete cost centre accounting, Product costing, PA and PCA will be implemented in ECC 6.0.
    Thanks for he reply.

  • Cost centre wise expenses comperative with period to period

    hi all,
                     pls tell me is there any standard report for cost centre wise expenses comperative with period to period.
                  if not pls help me how i can prepare it and also tell me table name.
    regards
    vikas

    Hi,
    check tcode KSBT
    KSBL
    S_ALR_87013611
    S_ALR_87013612
    S_ALR_87013613
    S_ALR_87013614
    S_ALR_87013623
    S_ALR_87013624
    S_ALR_87013625
    S_ALR_87013626
    Regards,
    V.Balaji
    Reward if Usefull...
    Edited by: Balaji V on Apr 1, 2008 6:40 AM

  • How can we create cost centres in SAP B1

    please advise how we can create cost centres in SA P-B1 as we do in tally.

    Hi
    You can Download the e-learning File in SAP Customer portal regarding cost Accounting
    Go to [http://service.sap.com]
    Customer portal =>Education=>Release 2007 => Finance=> cost and Budgeting
    Regards
    Balaji

  • Cost Center Budget-Cost element wise

    Dear SAP Gurus,
    My client needs to create cost center budgets cost element wise. For e.g. Salary paid (code 430000) in Development Cost center (code 9901).
    We now use KPZ2 to create cost center budgets and KP06 for cost element planning. Kindly guide.
    Regards,
    Siva

    Hi Ramesh,
    Thank you for the reply. I did suggest them to use KP06 but they require some sort of validation when posting an expense (cost element) to and cost center.
    For e.g. If the travel budget for Marketing cost center is $1000, they need the system to prevent posting once that amount is exceeded.
    Any help in this regard would be appreciated.
    Regards,
    Siva

  • Cost centre wise material issued

    hi
    all
    can you tail me trs code for cost centre wise matrial issued report
    or any realted deatil report transaction code

    Dear Kalyani,
    Though you have marked as answered I would like to give my inputs.
    Check in T Code MB51 for 201 movement,by mentioning the plant and the date ranges,Execute and if you are unable to find the
    cost center in the report means,click on change variant and include the required fields.
    at table level check in MSEG and for 201 movement type.
    Regards
    Mangalraj.S

  • How to add new cost center to cycle segments

    Hello SAP Gurus,,
    How to add new cost center to cycle segments?
    needed badly and ASAP

    Hi
    Go to KSu2 and give the cycle name ad select the segment that you need to add cost center.
    If you are deal with cost cneter groups add new cost center to your cost center group KSH2.
    Kesh

  • How to Add the Cost Element in Existing Zreport Painter

    hi friends
    i have issue with report painter
    one Cost Element is not picked in Z Report which was created in Report painter
    transaction data could be found in standard reports.
    please expain how to Add the missing Cost Element in Existing  ZReport
    Point will be awarded.
    Thanks

    Check your sets first, if the cost element is missing from there, then change the set using GS02
    Cheers
    Prakash

  • How to add page numbers (centred) at the foot of a page?

    Even this is confusing!
    I typed my question hit return and was told I couldn't post a blank message.
    How do I post my message?
    I simply want to know how to add a page number at the foot (centred) of a page.
    Oh! Great! Now I see, I should have known to scroll way down to find "post message".
    Anne

    What kind of document: word processing? Spreadsheet? something else?
    What program are you using to create the document?

  • How to Capture Multiple Cost centres and Business Unit information in a project?

    Dear Experts,
    With the help of UDA functionality in project super responsibility, I have captured Cost centre and Business unit information and this info will be used/reflected in CC and BU segments of all transactions gets recorded against that project.
    Now, our user wish to have multiple cost centres and business units to be tracked in the same one project. How is this feasible? Below example describes my requirement in a summary, please advise.
    An Indirect project is created when a defect on a machine reported from client's customer and all subsequent activities (purchases, travel to customer site to analyse and troubleshoot, purchases for any in-house analysis etc..involves costs spending internally) in resolving that defect/project involves 6 to 7 different departments (Sales, Tech Support, Quality team etc.,who actually work/travel and spend costs against project until defect resolution). And, each of the above departments will have 1 dedicated owner (project owners) to manage that project and each of these 6 or 7 owners owners will have their own cost centres (eg: 2345 - Sales team) against which they wish to see their transactions (travel, purchases during defect resolution) globally.
    So, all I want to know is how can I make one single project to accommodate multiple cost centresand business unit information to be assigned using UDA? Please let me know if I am not clear.
    Regards
    Venkat

    I think you should use the expenditure organization on the transaction itself to derive the CC/BU. Have AA lookups and define AA rules where you look at a Exp Org to BU or Cost Center to derive accounting.

  • How to Add the Cost of manually created PR under Network/Activity

    Dear All,
    When I create a PR manually with Acc *** Cat as Q & enter the WBS Element & Network under acc *** tab, the cost of PR is going and sitting as WBS cost. But how can i add that cost under Network instead of WBS ?
    regds,
    CB

    in our project, generally sevice use "N", material use "Q"

  • How to show budget cost in the PPR screen?

    Hi all,
    I define budget cost of project already but in PPR screen It cannot show this value. It show only actual cost. Please advice me to show this value.
    Thank you.

    Only baselined budget values shown in the Project Performance Page.
    Also Run the Project Performance Summary Programs.
    Govind
    Edited by: GovindVenu on Jan 20, 2012 1:34 AM

  • AFAB - Ordinary Depreciation Distribution Cost Centre wise

    Dear All
    I need to distribute ordinary depreciation values for each cost center wise in GL.
    I have setup,
    1.  Cost Centers in Asset Masters
    2.  Create GL account with cost element without assigned default cost center
    3. ACSET configuration for Cost Centers (KOSTL)     
    When I processed AFAB that given an error as
    Account 5012117 requires an assignment to a CO object
    when assigned default cost center to cost element then AFAB is running and depreciation value accumulated one cost center in GL.
    Please advice to over come this problem.
    Thanks
    Madhawa

    HI
    1. In ACSET, did you choose "Depreciation posting" or "Acquisition posting" against KOSTL
    You should choose both i.e. Create 2 entries for KOSTL in ACSET
    2. In ACSET, hope you have checked the check box in the last column
    Regards
    Ajay M

Maybe you are looking for

  • Ipad 1 upgraded to iOS 5, "play where left off" video function no longer works, and codecs aren't recognized.

    for some reason after updating to iOS 5, my videos no longer play where i left off, even if i set on the settings to do so. and yes i've tried restoring again, playing video over and over. resetting the video over and over. after a while of tinkering

  • Problems generating nodes in a JTree

    Hi Folks, I'm having difficulty in generating a JTree. The code follows. Basically, my application creates objects in a hierarchical fashion. The application creates objects of the classes Source, Requirement, DesignElement, ImplementationElement and

  • SunRay running on Ubuntu but still unable to get web services

    Here is where I stand, I am trying to get port 1660/SunRay administration page. I have been messing with the system for about a week I need to be pointed in the right direction. Thanks root@test-corp-esx-03:/opt/SUNWut/sbin# ls utadm        utcapture

  • Ever since upgrade I can't connect...sorta.

    Hello, I'm not entirely sure which upgrade, Safari 3-4 or 10.5.6-10.5.7 is the culprit here so I wasn't sure which forum to post in. Since doing these upgrades (which were done back-to-back), I've had problems connecting to the internet with some of

  • Office applications crash when opening files from network

    Using Office 365 32-bit on Win7 Pro PC.  When I try to open a file from a network drive, Word, Excel and Powerpoint (that's all I've tried thus far) crash and restart.  I can open the same file from local without issue.  Using the FixIt tool removes