How to add columns to an existing dimension on the fly?

Hey,
1) I already have a cube which is attached to three dimensions. Now if I wanted to add a few columns in the dimensions once they have been deployed, I find it difficult as the changes in the logical model and the physical table is not synchronized. Can some one please let me know, if adding columns to existing dimensions is possible?
2) I also had one more doubt. I have a fact table which has columns by the name parameter name and parameter value. Now once it is loaded I want to make certain calculations using a few parameters values and store them in the same fact table in the form of a new parameter name and the derived parameter value. How can I go about doing this part in OWB.
Thanks

1. Yes you can add existing columns to a dimension, there are a couple of approaches; either add the columns to tje underlying table and then change the dimension to manual binding and add attributes to represent the columns. Or edit the dimension and regenerate the implementation table.
2. Could these not be just additional measures that you calculate in the cube load?
Cheers
David

Similar Messages

How to add columns for existing table dynamically?

Hi,
I created table structure only. I want to add columns for this existing table. Columns are not fixed, according to the user choice i need to write code.
Plz give me reply asap.
Thanks
Shirisha

Hi Shirisha,
I think the following code snippet will help you.
int l_no_cols = 0;
//Get the number of columns in this variable, something like the following
//l_no_cols = wdContext().currentContextElement().get<Context_attribute_name>;
IWDTable l_tab;
IWDTransparentContainer l_tbl_cont = (IWDTransparentContainer)view.getElement("TableDataCont");//ID of Container
l_tab = (IWDTable)view.getElement("TableData");//ID of Table
l_tab.setVisible(WDVisibility.VISIBLE);
l_tab.bindDataSource(wdContext.nodeTable_Data().getNodeInfo());
for(int a = 1; a <=l_no_cols; a++)
//Creating the column
IWDTableColumn l_tab_col = (IWDTableColumn)view.createElement(IWDTableColumn.class,"COL"+a);
//Creating Caption for Column Header
IWDCaption l_tab_cap = (IWDCaption)view.createElement(IWDCaption.class,"Caption"+a);
l_tab_cap.setText("Col"+i);
l_tab_col.setHeader(l_tab_cap);
//Creating Table Cell Editor for column
IWDInputField l_tab_cell = (IWDInputField)view.createElement(IWDInputField.class,"CellEditor"+a);
//creating context node attribute for the column dynamically
wdContext.nodeTable_Data().getNodeInfo().addAttribute("Col"+i,"com.sap.dictionary.String");
l_tab_cell.bindValue(wdContext.nodeTable_Data().getNodeInfo().getAttribute("Col"+i));
l_tab_col.setTableCellEditor(l_tab_cell);
l_tab.addColumn(l_tab_col);
l_tbl_cont.addChild(l_tab);
Regards,
Alka

How to add blank page to existing Document In Adobe Dc

how to add blank page to existing Document In Adobe Dc Pro

Hi thashrifs16749461,
You can add a blank page using Adobe Acrobat DC by following the below instructions :-
1) Open your existing pdf document in Acrobat DC.
2) Choose the 'Organize Page' option form the Tools pane on the right as shown below in the screen shoot.
3) Now at the top you will see all the tools to Organize the page, Click on 'Insert' & select 'Blank Page' from the drop-down to insert blank pages.
*Shortcut : If you are using windows computer you can use ' Shift+Ctrl+T ' key to insert blank pages.
In case if you experience any issue or have any query please let us know. We will be happy to help you.
Regards,
Aadesh

How to add column dynamically based on user input in oracle?

**how to add column dynamically based on user input in oracle?**
I am generating monthly report based on from_date to to_date below is my requirement sample table
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE | 01-OCT-12 | 02-OCT-12 | 03-OCT-12
100001.............John...........02-OCT-12...............6
100002.............chris...........01-OCT-12...............4
Based on user input, that is, if user need the report from 01-OCT-12 TO 03-OCT-12, i need to add that dates as column in my table, like 01-OCT-12 | 02-OCT-12 | 03-OCT-12....
below is my code
create or replace
procedure MONTHLY_LVE_NEW_REPORT_demo
L_BUSINESS_UNIT IN SSHRMS_LEAVE_REQUEST_TRN.BUSINESS_UNIT%TYPE,
--L_LEAVE_TYPE_CODE IN SSHRMS_LEAVE_REQUEST_TRN.LEAVE_TYPE_CODE%TYPE,
L_DEPARTMENT_CODE IN VARCHAR2,
--L_MONTH IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_FROM_DATE IN SSHRMS_LEAVE_REQUEST_TRN.LVE_FROM_DATE%TYPE,
L_TO_DATE in SSHRMS_LEAVE_REQUEST_TRN.LVE_TO_DATE%type,
MONTHRPT_CURSOR OUT SYS_REFCURSOR
AS
O_MONTHRPT_CURSOR_RPT clob;
v_return_msg clob;
BEGIN
IF (L_BUSINESS_UNIT IS NOT NULL
AND L_FROM_DATE IS NOT NULL
and L_TO_DATE is not null
-- AND L_DEPARTMENT_CODE IS NOT NULL
THEN
OPEN MONTHRPT_CURSOR FOR
select EMPLOYEE_CODE, EMPLOYEE_NAME AS NAME, DEPARTMENT_CODE AS DEPARTMENT,DEPARTMENT_DESC, CREATED_DATE,
NVL(WM_CONCAT(CL_RANGE),'') as CL_TAKEN_DATE,
case when NVL(SUM(CL2),0)<0 then 0 else (NVL(SUM(CL2),0)) end as CL_BALANCE,
from
SELECT DISTINCT a.employee_code,
a.EMPLOYEE_FIRST_NAME || ' ' || a.EMPLOYEE_LAST_NAME as EMPLOYEE_NAME,
a.DEPARTMENT_CODE,
a.DEPARTMENT_DESC,
B.LEAVE_TYPE_CODE,
B.LVE_UNITS_APPLIED,
B.CREATED_DATE as CREATED_DATE,
DECODE(b.leave_type_code,'CL',SSHRMS_LVE_BUSINESSDAY(L_BUSINESS_UNIT,to_char(b.lve_from_date,'mm/dd/yyyy'), to_char(b.lve_to_date,'mm/dd/yyyy'))) CL_RANGE,
DECODE(B.LEAVE_TYPE_CODE,'CL',B.LVE_UNITS_APPLIED)CL1,
b.status
from SSHRMS_EMPLOYEE_DATA a
join
SSHRMS_LEAVE_BALANCE C
on a.EMPLOYEE_CODE = C.EMPLOYEE_CODE
and C.STATUS = 'Y'
left join
SSHRMS_LEAVE_REQUEST_TRN B
on
B.EMPLOYEE_CODE=C.EMPLOYEE_CODE
and c.EMPLOYEE_CODE = b.EMPLOYEE_CODE
and B.LEAVE_TYPE_CODE = C.LEAVE_TYPE_CODE
and B.STATUS in ('A','P','C')
and (B.LVE_FROM_DATE >= TO_DATE(L_FROM_DATE, 'DD/MON/RRRR')
and B.LVE_TO_DATE <= TO_DATE(L_TO_DATE, 'DD/MON/RRRR'))
join
SSHRMS_LEAVE_REQUEST_TRN D
on a.EMPLOYEE_CODE = D.EMPLOYEE_CODE
and D.LEAVE_TYPE_CODE in ('CL')
AND D.LEAVE_TYPE_CODE IS NOT NULL
group by EMPLOYEE_CODE, EMPLOYEE_NAME, DEPARTMENT_CODE, DEPARTMENT_DESC, CREATED_DATE
else
v_return_msg:='Field should not be empty';
end if;
END;
my code actual output
EMPLOYEE_CODE| Name | CL_TAKEN_DATE | CL_BALANCE
100001....................John............02-OCT-12.................6
100001....................chris...........01-OCT-12.................4
how to add column dynamically based on from_date to to_date?
Thanks and Regards,
Chris Jerome.

You cannot add columns dynamically. But you can define a maximum number of numbers and then hide unused columns in your form useing SET_ITEM_PROPERTY(..,VISIBLE, PROPERTY_FALSE);

How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?

I have simple mxml code
<mx:DataGrid id="DGG"
             editable="true">
    <mx:dataProvider>
        <mx:Object scheduledDate="4/1/2006"/>
    </mx:dataProvider>
</mx:DataGrid>
<mx:Button id="SetBut"
           label="Set Array as Data Provider"
           click="SetDP(); AddBut.visible = true;"
           x="100.5"
           y="164"
           width="211"/>
<mx:Button id="AddBut"
           label="Add a column!"
           click="AddCol();"
           x="100.5"
           y="194"
           width="211"
           visible="false"/>
<mx:Script>
    <![CDATA[
        import mx.controls.dataGridClasses.DataGridColumn;
        import mx.collections.ArrayCollection;
        [Bindable]
        public var MyAC:ArrayCollection=new ArrayCollection([{scheduledDate: "4/1/2006", homeTeam: "Chester Bucks"}]);
        public function SetDP():void
            DGG.dataProvider=MyAC
        public function AddCol():void
            MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
            DGG.columns.push(new DataGridColumn("Umpire"));
    ]]>
</mx:Script>
I want to add rows to my table datagrid how to do such thing?
How to add Column to Adobe flex mx:DataGrid in mxml and/or actionsctpt?
(You can put this code in Flash or AIR app - it will compile with no errors, but will not add any columns=( )

Change this:
             public function SetDP():void
                DGG.dataProvider=MyAC
                MyAC.addItem({scheduledDate: "4/5/2007", homeTeam: "Long Valley Hitters", Umpire: "Amanda Hugenkis"});
            public function AddCol():void
                var dgc:DataGridColumn = new DataGridColumn("Umpire");
                var ca:Array = DGG.columns;
                ca.push(dgc);
                DGG.columns = ca;
Dany

How to add more than one input arguments to the tpcall

Hi
Can any one know how to add more than one input arguments in the tpcall using WTC (Jatmi)?
Par example, I have un service Tuxedo getConsoClient(char* cli_id, char* type)
To call this service, I'm using tpcall("getConsoClient", dataIn, 0);
here, I did't know how to add two parameters in the TypedBuffer object. I'm new to WTC.
Any hints will be greatly appreaciated.
Advanced thanks

Thanks for you help. But in java Jatmi, I have lot of problem to convert array into TypedBuffer or TypedString. See below code, I'm tried using vector or tableau etc..
But I have always same erreur. :(
public void getClientInfo() {
     Context ctx;
     TuxedoConnection myTux;
     TypedString numinst = new TypedString("1");
     TypedString idClient = new TypedString("1003");
     TypedString[] dataIn = {numinst,idClient};
     //TypedString dataIn = new TypedString(numinst+"\0"+idClient+"\0");
     Vector input = new Vector();
     input.add(0,numinst);
     input.add(1,idClient);
     Reply rpy = null;
     try{
          System.out.println("getClientInfo called : " + dataIn);
          TuxedoConnectionFactory tcf;
          ctx = new InitialContext();
          tcf = (TuxedoConnectionFactory) ctx.lookup("tuxedo.services.TuxedoConnection");
          myTux = tcf.getTuxedoConnection();
          System.out.println("About to call tpcall cnx = "+myTux);
          rpy = myTux.tpcall("LireInfoCli_SE",(TypedBuffer)dataIn, 0);
          System.out.println("tpcall successfull!");
          TypedFML32 typ = (TypedFML32) rpy.getReplyBuffer();
          System.out.println("Reply Type = "+rpy.getReplyBuffer().getType());
          System.out.println("Reply toString = "+typ.toString());
          while(typ.Fiterator().hasNext()){
               System.out.println("Reply toString = "+typ.Fiterator().next().toString());
          myTux.tpterm(); // Closing the association with Tuxedo
     }catch (TPReplyException tpx) {
          // Could not get the tuxedo object, throw TPENOENT
          System.out.println("TPReplyException perrno = " + tpx.gettperrno()+" DETAILS "+tpx.gettperrordetail()+" getLocalizedMessage "+tpx.getLocalizedMessage()+" "+tpx.getCause());
          tpx.printStackTrace();
     }catch (TPException tpx1) {
          // Could not get the tuxedo object, throw TPENOENT
          System.out.println("TPReplyException perrno = " + tpx1.gettperrno()+" DETAILS "+tpx1.gettperrordetail()+" getLocalizedMessage "+tpx1.getLocalizedMessage()+" "+tpx1.getCause());
          tpx1.printStackTrace();
     }catch (NamingException ne) {
               // Could not get the tuxedo object, throw TPENOENT
               System.out.println("Could not get TuxedoConnectionFactory : " + ne.getMessage());
               ne.printStackTrace();
     }catch(Exception e){
               System.out.println("Exception in getClientInfo ->"+e.getMessage());
               e.printStackTrace();
     return;
}

How to insert columns in an existing table?

iv read the tutorial in this site http://www.w3schools.com/sql/sql_alter.asp but it is not for SQL Server 2000 DB.
Im using SQL Server 2000 DB. how do i insert column in an existing table?
i tried to execute the code (String query) below but it doesn't wrk:
For data type char:
String query = "ALTER TABLE [dbo].["+tablename+"] ADD [columnname] [char] (60) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL";
For data type int:
String query = "ALTER TABLE [dbo].["+tablename+"] ADD [columnname] [int] NOT NULL";________________________
is what's wrong with the code?

Best solution would be to look up the exact syntax from the SQL Server 2000 documentation. The tutorial you have there teaches the ANSI Standard SQL. It is surprising that SQL Server 2000 (Microsoft right?) doesn't comply with that (especially since they list it in as one of the ones the tutroial was made to demonstrate).
I would double and triple check your sintax, whatch your error logs to make sure something else isn't preventing you from changing, and making sure you are logged in to the DB as a user who has the ability to alter tables.

How to Load new members into existing dimensions in Planning 9.3.1

Hi,
I am not having HAL, and is it possible to load members into existing dimensions of a newly created planning application - for example under accounts I want to add around 100 members - how to add them using a flat file without using HAL - is there anyother way out.
Can we use workspace->Navigate ->administer->Dimention Library
Create a new dimension here add that to Accounts ?? help me in this

John,
Can you suggest me the syntax to be used for the below example to create a flat file
the Hiearchy I have(for accounts and entity)
current:
Accounts
I need t have the following children under Accounts
Child of Accounts:Assets,alias(assets of x company)
Child of Asssets: 101, alias(asset1),Datastorage("store"), base currency("USD"),aggregation(+),Plantype("plan1")
Regards,

How to add column to iHistResult View

Hi,
I need to add a column to the iHistResult view. The column does not exist in BOL entity BTOrder attribute list. I am trying to add the Contact Person to the results list. ( Header Partner Function-Contact Person ). Any suggestions on how to proceed? We are using CRM 5 and I am new to CRM, so please provide as much step-by-step detail as your time permits.
Thanks,
John.

Hi Sreekanth,
I did try the code below in my GET_FULLNAME method. The code I used is below. I tried switching out the "DESCRIPTION_NAME" to the attribute name that I created "FULLNAME" but I still get the message 'BTOrder not Bound' in the FULLNAME column of the iHistResult view. The message appears for all rows in the view. Thanks for all your help and any more suggestions are greatly appreciated.
The code for my GET_FULLNAME method is below:
method GET_FULLNAME.
DATA: current TYPE REF TO if_bol_bo_property_access.
DATA: dref TYPE REF TO data.
value = 'BTOrder not bound'.                              "#EC NOTEXT
if iterator is bound.
    current = iterator->get_current( ).
else.
    current = collection_wrapper->get_current( ).
endif.
TRY.
      DATA: coll TYPE REF TO if_bol_entity_col.
      DATA: entity TYPE REF TO cl_crm_bol_entity.
      entity ?= current.
      coll = entity->get_related_entities( iv_relation_name = 'BTOrderHeader' ). "#EC NOTEXT
      current = coll->get_current( ).
      IF current IS NOT BOUND.
        RETURN.
      ENDIF.
      entity ?= current.
      coll = entity->get_related_entities( iv_relation_name = 'BTHeaderPartnerSet' ). "#EC NOTEXT
      current = coll->get_current( ).
      IF current IS NOT BOUND.
        RETURN.
      ENDIF.
      entity ?= current.
      coll = entity->get_related_entities( iv_relation_name = 'BTPartner_00000015' ). "#EC NOTEXT
      current = coll->get_current( ).
      IF current IS NOT BOUND.
        RETURN.
      ENDIF.
      TRY.
*dref = current->get_property( 'DESCRIPTION_NAME' ). "#EC NOTEXT
          dref = current->get_property( 'FULLNAME' ).       "#EC NOTEXT
        CATCH cx_crm_cic_parameter_error.
      ENDTRY.
      CATCH cx_sy_ref_is_initial cx_sy_move_cast_error cx_crm_genil_model_error.
      RETURN.
ENDTRY.
IF dref IS NOT BOUND.
    value = 'BTOrder/BTOrderHeader/BTHeaderPartnerSet/BTP... not bound'. "#EC NOTEXT
    RETURN.
ENDIF.
TRY.
      value = if_bsp_model_util~convert_to_string( data_ref = dref
                                                   attribute_path = attribute_path ).
    CATCH cx_bsp_conv_illegal_ref.
    FIELD-SYMBOLS: <l_data> type DATA.
    assign dref->* to <l_data>.
please implement here some BO specific handler coding
conversion of currency/quantity field failed caused by missing
unit relation
Coding sample:
provide currency, decimals, and reference type
value = cl_bsp_utility=>make_string(
value =
reference_value = c_currency
num_decimals = decimals
reference_type = reference_type * ).
      CONCATENATE <l_data> '-CURR/QUANT CONV FAILED-' INTO value SEPARATED BY space. "#EC NOTEXT
      CATCH cx_root.
      value = '-CONVERSION FAILED-'.                        "#EC NOTEXT
ENDTRY.
endmethod.
Thanks,
John.

Add Column to an existing CSV using powershell

Hi Everyone,
I am horribly stuck in building a logic of how can i add a column with certain details in an existing CSV using powershell. I tried many things one of the code is posted below.
The situation is , I have a Folder path ' D:\Exclusion\Final1' it contains a list of CSV's that looks like below:
preprocessed1.csv
CI,Environment
vm-Serv1,Test
preprocessed2.csv
CI,Environment
vm-bkp1,Prod
and so on with same structure..
Then I have another CSV that Contains certain list of Patches and Title
looks like:
Master_Exclusion.csv
Title, Patch
xyz, KB23109
abc, KB432344
yyy, KB321221
What I am Trying to do is to Copy the Column 'Patch' from here and copy them to all the CSVs present at ' D:\Exclusion\Final1'
and the output would look like :
preprocessed1.csv
CI ,Environment , Patch
vm-Serv1, Test ,KB23109
KB432344
KB321221
CI,Environment,Patch
vm-bkp1,Prod, ,KB23109
KB432344
KB321221
$filepathex=Get-ChildItem D:\Exclusion\Final1
foreach($fileex in $filepathex)
$exclusion=Import-Csv D:\Exclusion\Master_Exclusion.csv
$list=Import-Csv D:\Exclusion\Final1\$fileex
$list |
Select-Object *,@{Name='Patch';Expression={$exclusion.Patch}}} |
Export-Csv D:\Exclusion\Split2\$fileex -Append -NoTypeInformation
Thanks in Advance for any help or suggestions.

I am extremely sorry for the confusions , actually I am trying to just add a new column named "Patch" to a a list of existing CSV's . the patch column is present in another CSV i need to append it to the list of CSV's
Like
existing csv:
CI,Environment
vm-serv,Test
and another CSV is
Master_Exclusion.csv
Title,Patch
xyz,kb084932
yrx,KB893748
trw,kb949298
The output would be :
output.csv
CI,Environment ,Patch
vm-serv,Test,kb084932
KB893748
kb949298

How to add Column field in the custom Query Link search page as a header

Hi,
I have created a Query page link in web layout editor. Now, I want to customise the view of the result. I see an option to change the "Text1" and "text2", but how do I add other fields as a colum in the search result ?
The only column I see by default Id, Title, release date and author. I want to see some of the custom metadata in the search result. I don't wan't to apply user specific custom search page.
Overall, I want a common search view across all the user such that each user doesn't have to create a custom search view.
Please help.
Thanks

hi
By adding context node, you will not be able to fetch value. To fetch value in BTSubject, you need to have following nodes in your context node.
Node Relation Higher level node
BTAdminH
BTBOSSet BTHeaderBOSSet BTAdminH
BTSubjectSet BTSubjectSet_A BTBOSSet
BTSubject BTSubjectAll BTSubjectSet_A
Right now you dont have BTBOSSet and BTSubjectSet in your view. That is why component is unable to pull data in BTSubject.
My suggestion would be to create cuco with above nodes
Bind BTAdminH with BTAdminH of Component controller
and bind BTSubject of details view with BTSubject of your Cuco.
If you want code code gp catalog as it comes in complaint then there is seperate procedure for that.
Best regards
Pankaj Kumar

How to add columns in field-symbol

Dear All,
Have made a report for HR - ZHR_CTC by using logical database and field-symbol. Report is working fine, but now have to add columns e.g business area text, positions text etc.
Have added columns in field-symbol.But not able to fetch data into that.
Data has to be fetched from different trasparent table comparing <field-symbol>-field.
Plz suggest the proper way to do it.
<<text removed>>
Regards,
Gulrez Alam
Edited by: Gulrez Alam on Dec 16, 2008 11:02 AM
Edited by: Matt on Dec 16, 2008 11:36 AM

Hi Rimpa,
Thanks a lot for you reply, have tried ur suggestion but it's not working. I am not able to understand how to insert data into field-symbol. Plz give some more clarifications about the same.
Regards,
Gulrez Alam

How to add columns (fields) to header section of an alert e-mail?

Hi all,
In a standard out of the box alert template, I want to add custom fields (e.g. Notes, Value p.a.) to the body of an alert e-mail, see photo:
These cannot be any list/library built-in columns like 'Created', 'Created By' etc.
The class responsible for those column in 'Alerttemplate.xml' is:
<![CDATA[ </tr> </table> </td></tr></table> </td> </tr> <tr> <td class="vh" colspan="2">$Resources:Alerts_event_title;</td> <td class="vh">$Resources:Alerts_event_modified;</td> <td class="vh">$Resources:Alerts_event_modifiedby;</td> <td class="vh"> </td> </tr> <tr> <td colspan="5" class="rulerow"> </td> </tr> ]]>
How can I add additional fields to that?

Since there was no input from anyone on the forum, I have come up with a following workaround:
I could not add any more columns to the alert e-mail body for edited items so I used a 'Title' column to combine all the columns a wanted to display in the e-mail alert.
These were the 'Prefix' - 'Suffix' 'Product' columns. On 'Edit' and 'New' forms, there is a piece of jquery to combine those 3 columns and store the value in a 'Title' column which is appropriately hidden from the views and forms. There is no 'Quick Edit'
switched on in the list so jquery will always run setting a 'Title' column correctly.
Users can see the relevant information right in their inbox so they won't have to log in to SP remotely to look up this information.

REG: How to add new fields to existing Infospoke

Hi All,
We have an existing Infospoke, It has ODS as a Source and some fields are being pulled.
But here is the scenario....
I need some extra fields that are available in other ODS. How to add that fields ?
By some research came to know that.. I need to lookup on the ODS and populate into existing Infospoke.How to add these fields to InfoSpoke using BAdi implementaion.
Note: already BAdi is active in the infospoke.
Please help me in this regard

Hi Chase,
As you mentioned that BADI is already implemented then I guess you should be able to extend the existing BADI itself.
For doing lookup first you should know the key fields of source DSO then by using the existing field of Infospoke you will have to read data from DSO.
DATA: it_data type standard table of 'DSO Name'.
select Key1 key2 etc...
          Field1 Field2 Field3 Field4
          from DSO
          into table it_data
          for all entries of infospoke
         where key1 = infospoke1-key1
                     key2 = infospoke2-key2.
This will give you all the required records from source DSO into internal table it_data. Now you using this table you can populate the original table of Infospoke.
Regards,
Durgesh.

How to add column access BADI to appraisal template.

I am not able to see option to add column access BADI in template at Processing tab--> Further template behaviour.
Kinldy let me know how to add it.
I am able to see only following options
BC         Business Check
D1         Default Appraiser
D2         Default Appraisee
DE         Default Execution Period
DN         Default Appraisal Document Name
DP         Default Part Appraiser
DR         Default Review Date
DV         Default Validity Period
HA         Header Data Change
PM         Maximum Number of Part Appraisers
Thanks in advance.
Dhananjy

Hello Ravikiran,
Based on the Role and Status of the appraisal form, turn the Column On/Off/Hide..
sample code...
case s_header_status-ap_status.
          when c_status_in_preparation.
            availability = 'H'.
            column_owner   = space.
          when c_status_in_planning.
            case s_body_columns-column_id.
              when 'OBJ0'.
                availability   = 'X'.
                column_owner   = 'X'.
                exit.
              when 'Z003'.
                availability   = 'X'.
                column_owner   = 'X'.
Hope it helps...
Regards,
Jothi.P

How to add columns to an existing dimension on the fly?

Similar Messages

Maybe you are looking for