How to add Logo in Bex report
Hi Guys,
How to add logo in a Bex report.
Hi ABDUL KHADAR
We can only add the logo at Work book level but not the query level @the query
level it wont allow us to add.
Jus open an ordinary excel sheet format it as you wish Ctrl+A and fill with white
color .Then jus save u r logo which u wont to upload in the desktop.
Then go to file insert picture or file and place it wher ever u wont in the work sheet
and save it as a templete and then insert the query in this templete and format it
as per your standarads.
If any struck up feel free to let me know. We explain you clearly...
hope its helpful..
Cheers
R M K
**Assigning poitz ez da only way of saying thankz in SDN**
Similar Messages
-
How to add filter in Bex report
hi how to add filter in BEx report and what is the difference between filter and free charcteristics.
Regards,
Viren.Hi Viren,
difference between filter and free characteristics is that free characteristics can be added to drilldown at query runtime. Filter values can not be changed at query runtime.
You can add a filter to a query by placing a characteristic in filter section and restrict the characteristic to certain values. Characteristics in rows / columns / free characteristics section can be restricted to certain values, too.
Best regards,
Björn -
Hi,
How To add Logo in ALV Report?
I need step by step explanation.Hi uday,
go through this hope u can understand.
*& Report Z_OOALV_LOGO
*&--Sample Program using ooalv-> by SrikanthV--
REPORT z_ooalv_logo.
****DECLARATION FOR LOGO INSERT
CONSTANTS: cntl_true TYPE i VALUE 1,
cntl_false TYPE i VALUE 0.
DATA:h_picture TYPE REF TO cl_gui_picture,
h_pic_container TYPE REF TO cl_gui_custom_container.
DATA: graphic_url(255),
graphic_refresh(1),
g_result LIKE cntl_true.
DATA: BEGIN OF graphic_table OCCURS 0,
line(255) TYPE x,
END OF graphic_table.
DATA: graphic_size TYPE i.
CALL SCREEN 100.
*&----
*& Module PICTURE OUTPUT
text
MODULE picture OUTPUT.
DATA: l_graphic_xstr TYPE xstring,
l_graphic_conv TYPE i,
l_graphic_offs TYPE i.
CALL METHOD cl_ssf_xsf_utilities=>get_bds_graphic_as_bmp
EXPORTING
p_object = 'GRAPHICS'
p_name = 'EDS'"IMAGE NAME - Image name from SE78
p_id = 'BMAP'
p_btype = 'BCOL'
RECEIVING
p_bmp = l_graphic_xstr
EXCEPTIONS
not_found = 1
OTHERS = 2.
graphic_size = XSTRLEN( l_graphic_xstr ).
CHECK graphic_size > 0.
l_graphic_conv = graphic_size.
l_graphic_offs = 0.
WHILE l_graphic_conv > 255.
graphic_table-line = l_graphic_xstr+l_graphic_offs(255).
APPEND graphic_table.
l_graphic_offs = l_graphic_offs + 255.
l_graphic_conv = l_graphic_conv - 255.
ENDWHILE.
graphic_table-line = l_graphic_xstr+l_graphic_offs(l_graphic_conv).
APPEND graphic_table.
CALL FUNCTION 'DP_CREATE_URL'
EXPORTING
type = 'image'
subtype = cndp_sap_tab_unknown " 'X-UNKNOWN'
size = graphic_size
lifetime = cndp_lifetime_transaction "'T'
TABLES
data = graphic_table
CHANGING
url = graphic_url
EXCEPTIONS
dp_invalid_parameter = 1
dp_error_put_table = 2
dp_error_general = 3
OTHERS = 4 .
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
EXIT.
ENDIF.
CREATE OBJECT h_pic_container
EXPORTING container_name = 'LOGO'.
CREATE OBJECT h_picture EXPORTING parent = h_pic_container.
CALL METHOD h_picture->load_picture_from_url
EXPORTING
url = graphic_url
IMPORTING
RESULT = g_result.
ENDMODULE. " PICTURE OUTPUT
Reward points if helpful.
Thanks -
How to set default company logo in bex report(analyzer)?
hi,
i have a requirement that i need to create default template for my queries in bex analyzer. whenever i execute my query in analyzer the company logo should be on top of the query. i know how to do it in workbook but could you explain me how to set the default company logo in bex reports?
thanks
vadlamudiSee the following document on creating a workbook template with an image: [http://www.researchsummary.ca/bw/Sample_Ch10.pdf]
In BW, there is a table that stores the default workbook. The following snippet of code allows you to identify a custom workbook template as the default template for all end users.
*& Report Z_SET_BEX_USER_TEMPLATE *
*& Program to update all user's default template *
REPORT Z_SET_BEX_USER_TEMPLATE.
TABLES: rsrwbtemplate,
usr01.
PARAMETER: wbid LIKE rsrwbindex-workbookid.
SELECT
FROM
usr01.
MOVE: usr01-bname TO rsrwbtemplate-templateuser,
wbid TO rsrwbtemplate-workbookid = wbid.
UPDATE
rsrwbtemplate.
IF sy-subrc 0.
INSERT
rsrwbtemplate.
ENDIF.
ENDSELECT. -
Can we add logo to BEx query ???
Hi All,
I would like to know can we add logo to Bex query. I know that we can add to Bex workbook.
ThanksIs this for BEx Analyzer or BEx Web Analyzer?
For BEx Web Analyzer, you can take the standard template 0ANALYSIS_PATTERN, save it as a custom template and customize it to include a corporate logo. See the following for a How To... on this:
[How to Enhance SAP BEx Web Analyzer (0ANALYSIS_PATTERN)|http://www.sdn.sap.com/irj/scn/index;jsessionid=(J2EE3414900)ID0574286750DB11281326545475972586End?rid=/library/uuid/200d6cb6-080e-2b10-84a5-b96723ad8f18&overridelayout=true] -
How to upload logos in alv reports
how to upload logos in alv reports?
Hi Kishore,
ALV LOGO
Re: How do I insert a logo in ALV using Function Modules?
http://www.sapdevelopment.co.uk/reporting/alv/alvgrid.htm
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
Here you go !!
*& Form TOP_OF_PAGE
text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo = Logo name
I_END_OF_LIST_GRID =.
ENDFORM. "TOP_OF_PAGE
Hope this helps.
Manish -
How many structures can a BEx report have?
Hi All,
How many structures can a BEx report have?
Is there any limit to that.
ThanksHi
we can create two structures in the querl level.
we can able to create two structures on rows but on columns it allows only one structure.
key figures can be included in characteristics. characterstics can't be included in the keyfigures.
we can save the structure as global and locally.
from query performance point of view its not recomemnded to create the structure.
it decreasse the query performance.
it may help you.
bye,
kumar. -
How to put header and how to insert logo in this report
HI
I want a header and logo in this report.how to do this in ALV report.Also why we have to put the sy-repid.Plz tell me in this report where i have to do all this.Plz show me in detail.
REPORT ZREPORT_ALV .
TYPE-POOLS : slis.
tables:vbak,vbap.
*DATA: report_id LIKE sy-repid.
DATA: I_LAYOUT TYPE SLIS_LAYOUT_ALV.
data: ivariant(1) type c,
itvariant like disvariant,
w_variant like disvariant.
initialization.
*REPORT_ID = SY-REPID.
PERFORM F1000_LAYOUT_INIT. "using I_LAYOUT.
ivariant = 'A'.
itvariant = w_variant.
select-options:so_vbeln for vbap-vbeln.
data:itab like vbak occurs 0 with header line.
data:itab1 like vbap occurs 0 with header line.
start-of-selection.
select * from vbak into table itab where vbeln in so_vbeln.
if not itab[] is initial.
select * from vbap into table itab1
for all entries in itab
where vbeln = itab-vbeln.
endif.
data:ls_fieldcat TYPE slis_fieldcat_alv,
lt_fieldcat1 TYPE slis_t_fieldcat_alv.
****For alv display
IF NOT itab1[] IS INITIAL.
DEFINE ls_fieldcat.
add 1 to ls_fieldcat-col_pos.
ls_fieldcat-fieldname = &1.
ls_fieldcat-outputlen = &2.
ls_fieldcat-seltext_l = &3.
ls_fieldcat-emphasize = &4.
append ls_fieldcat to lt_fieldcat1.
clear ls_fieldcat.
END-OF-DEFINITION.
ls_fieldcat 'VBELN' '10' 'Sales Order Number'.
ls_fieldcat 'POSNR' '6' 'SO Item'.
ls_fieldcat 'MATNR' '13' 'Material No'.
m_fieldcat1 'NETWR' '13' 'Amount'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_INTERFACE_CHECK = ' '
I_BYPASSING_BUFFER = ' '
I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = 'wf_report'
I_CALLBACK_PF_STATUS_SET = ' '
I_CALLBACK_USER_COMMAND = ' '
I_CALLBACK_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_TOP_OF_PAGE = ' '
I_CALLBACK_HTML_END_OF_LIST = ' '
I_STRUCTURE_NAME =
I_BACKGROUND_ID = ' '
I_GRID_TITLE =
I_GRID_SETTINGS =
IS_LAYOUT = I_LAYOUT
IT_FIELDCAT = lt_fieldcat1
IT_EXCLUDING =
IT_SPECIAL_GROUPS =
IT_SORT =
IT_FILTER =
IS_SEL_HIDE =
I_DEFAULT = 'X'
I_SAVE = ' '
IS_VARIANT = ITVARIANT
IT_EVENTS =
IT_EVENT_EXIT =
IS_PRINT =
IS_REPREP_ID =
I_SCREEN_START_COLUMN = 0
I_SCREEN_START_LINE = 0
I_SCREEN_END_COLUMN = 0
I_SCREEN_END_LINE = 0
I_HTML_HEIGHT_TOP = 0
I_HTML_HEIGHT_END = 0
IT_ALV_GRAPHICS =
IT_HYPERLINK =
IT_ADD_FIELDCAT =
IT_EXCEPT_QINFO =
IR_SALV_FULLSCREEN_ADAPTER =
IMPORTING
E_EXIT_CAUSED_BY_CALLER =
ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = itab1
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
I_SAVE = ivariant
CHANGING
CS_VARIANT = itvariant
EXCEPTIONS
WRONG_INPUT = 1
NOT_FOUND = 2
PROGRAM_ERROR = 3
OTHERS = 4
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
FORM F1000_LAYOUT_INIT. "USING I_LAYOUT TYPE SLIS_LAYOUT_ALV.
*CLEAR I_LAYOUT.
i_layout-colwidth_optimize = 'X'.
I_LAYOUT-key_hotspot = u2018Xu2019.
I_LAYOUT-hotspot_fieldname = MATNR.
ENDFORM.hi,,,,
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = sy-repid >>>>>>>>>>>>> your report name.
regarding logo and header,,,,
first store the logo in T-code OAOR, then call that in your report.......
data: heading TYPE slis_t_listheader,
wa_header TYPE slis_listheader,
events TYPE slis_t_event.
* To display TOP_OF_PAGE.
FORM top_of_page.
DATA : text(40),txtdt(40).
CLEAR l_string.
l_string = 'JCB India Limited'(hd2).
wa_header-typ = 'H'.
wa_header-info = l_string.
APPEND wa_header TO heading. " index 1.
CLEAR l_string.
WRITE :'Number of records:' TO text,dbcnt TO text+20 LEFT-JUSTIFIED.
wa_header-typ = 'S'.
wa_header-info = text.
APPEND wa_header TO heading.
CLEAR l_string.
wa_header-typ = 'S'.
WRITE : 'Report Run Date :' TO txtdt,sy-datum TO txtdt+20 DD/MM/YY.
WRITE sy-datum TO dat DD/MM/YY.
wa_header-info = txtdt.
APPEND wa_header TO heading.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
i_logo = 'ENJOYSAP_LOGO'
it_list_commentary = heading.
CLEAR heading.
ENDFORM. "top_of_page
to execute top-of-page you have to create events.
for ex......
FORM create_event USING p_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = p_events.
READ TABLE p_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE formname_top_of_page TO ls_event-form.
APPEND ls_event TO p_events.
ENDIF.
ENDFORM. " create_event -
HOW TO ACHIEVE THIS IN BEX REPORT ?
Hi
I have a query like below:
Indicator---Month---Volume--
Revenue
A--201101-10Tonnes----710USD
A--201102-20Tonnes----2000USD
Because of some selections in our query,It always displays data from beginning of year to present month(August).
Now requirement is to add new column named 'Average'.....It should be weigted average and will be calculated as below:
If we take records for 201101 month in cube....The calculations should be equivalent to Volume of each record * Revenue of each record / Total Volume for that month
so if we take cube and display all records for 201101 month for example:
Indicator--MonthVolume--Revenue
A--2011011--
100
A--2011012--
110
A--2011013--
200
A--201101-4--
300
Then 'Average' that needs to be displayed in report for 201101 month will be calculated as follows:
Volume for each record * Revenue for each record / Total Volume for that month
(1100+21103*2004*300)/(123+4)=212
So,the report will show 201101 as below:
Indicator----Month--Volume-Revenue--Average
A--201101-10710--
212
Similarly,if a report is executed for August month:
Indicator----Month--Volume-Revenue--Average
A--201101--10710--
212
A--201102--202000USD--300
A--201103--303000usd---400
A--201108--606000usd---700
How can I achieve this in query designer?
Regards.......Hi,
Just tried looking into your query. Few questions that I have:
1. When you say
"if we take cube and display all records for 201101 month for example:
Indicator--MonthVolume--Revenue
A--2011011--
100
A--2011012--
110
A--2011013--
200
A--201101-4--
300
If these records are there in cube , then when you query on them the report will get aggregated based on you Indicator & Month. So no individual records to do the calculation.
So I guess you should look for some routines while you are loading this records in the cube to do this calculation rather than Bex ...but I will feel good if someone can tell us to how to acheive it in Bex.
Ankit -
Customise Sap Report -- Add logo and change report layout
Hi All,
I have a requirement to amend sap standard report to add logo and change layout, could some one pls point me to teh right direction. Should we .1 Create a new smartfrom if yes -- how to to create smartfroms
2. Should we create new Zreport...3. Is Adobe Interactive forms any good---- cld you please share the steps to create Adobe Ine Form 4. is sap script any good way in my situation
Thanks
SmithChanges to SAP Standard are always a bit tricky, specially if we are talking about legal reports. If the standard report uses smartform, you can change the standard form without needing a SSCR key, so no need to create a Z report or smartform even, but like every change on SAP Standard, if further changes are made by SAP through Support packages you will always have to replicate them yourself everytime this happens. I would suggest creating a new Z report by copy of standard and new Z smartform, that way you can always recurr to the standard and see what was changed and then replicate them in you Z reports.
To create smartform, go to TCode smarforms and you can create one by copy of an existing smartform.
Adobe Interactive forms is more complex then smartforms and unless the standard uses a print form, i would not suggest you creating one as it will envolve a bit more knowledge. -
Hi Expertts,
How to add perrsons name (newly) in Automatic Broad casting report which is already running.
But one of my friend adviced me to do settings for" To make these changes, you must maintain the Setting SDT_PP_MM_01_S01 in the web report BRD_PP_mm_01. These changes should be made directly on PE8".
Please advice me , it's urgent for client requirement.
I will difinietely assingn points for this.
Thanks in Advance,
Thanks,
Kumar.Hi SG,
BUT WHEN I ENTER THE NAME OF THE WEB REPORT BRD_MM_01 AFTER OPENING THE REPORT , I WAS CLICKING ON PUBLISH---> AS BEX BROAD CASTER AND NEW SCREEN COMES WITH LOGON DETAILS
AFTER ENTERING THE LOGON DETAILS IT IS SHOWING ME THE SETTINGS FOR NEW USERS LIKE CREATE SETTINGS.
I WAS NOT ABLE TO ADD THE NEW USERS IN THAT BECUASE AFTER ENTERING THE USERNAEM AND MAIL ID'S IT'S GIVING ME THE MESSAGE LIKE THESE USERS ARE NOT VALID BW USERS.
BUT FOR AUTOMATIC BROADCAST OF THIS REPORT NO NEED OR BW USER I.E. I CAN BROAD CAST THIS REPORT TO ANY USER (RIGHT OR NOT)
AND ALSO IT IS ASKING ME THE ROLE OF THE USER ALSO.
PLEASE ADVICE ME .
THANKS IN ADVANCE,
REGARDS,
KUMAR. -
How to add push button in report.
Hi,
how to add a push button in the standard list report and on clicking which the line-size of the screen should reduce from 300 to 100.
how to proceed.
Can anyone help me.
Regards
GuhapriyanHii Guhapriyam,
You can ceate PUSHBUTTON in selection-screen like Below
SELECTION-SCREEN PUSHBUTTON 2(10) text-004 USER-COMMAND CL1.
Create a variable to hold the processed PUSHBUTTON value like
DATA v_flag TYPE flag.
The PUSHBUTTON will be processed at the event AT SELECTION-SCREEN. So write your code like below
AT SELECTION-SCREEN.
IF sy-ucomm EQ 'CL1'.
v_flag = 1. "Buttob clicked
ENDIF.
START-OF-SELECTION.
IF v_flag EQ 1.
NEW-PAGE LINE-SIZE 100.
ENDIF.
OR
The best way of doing this by setting PF-STATUS like
START-OF-SELCTION.
SET PF-STATUS 'ZSTATUS'. "Double click on this and set the pushButton in standard toolbar option and in function key specify the BACK, EXIT and CANCEL button .
Then write your logic at the event AT USER-COMMAND.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'RED'.
NEW-PAGE LINE-SIZE 100.
WHEN 'BACK' OR 'CANCEL' OR 'EXIT'.
LEAVE SCREEN.
WHEN OTHERS.
ENDCASE.
regards
Syed -
How to add new fields in report painter without library
Hi,.
I have to add new fields in report painter(std one) which is not in any library and so I am not able to add the fields in characteristics. Though I have added zfields in CCR1S but I am not able to add these fileds in characteristics in report painter(say - CJe3 t-code)
How to procedd for this.
Thanks,
MOhanhi,
first i copied the report 12KST1G in my Y12KST1G with form. In CJE2 when i Click this report then in the whatever fields coming in the characteristics we can put it in 'variables' tab and these will be the fields which is displayed on the selecton screen. So after doing the wbove changes in the exit , I am not able to get the fields in characteristics vale so that I can put it in variable. or do we have to do some chnages in the screen for this z report which is like std. one.
FYI..The display of the fields was done in z-report with library but this is like a report without library and we did some chnages in the exit.
Pls Suggest -
How to add new column in report painter
Hi Experts,
I want to add new column in report painter which as to calculate the previous column . value in the new column should be the precentage of previous column existing on left side...HI Pradeep,
Goto the transaction code (Change Report) GR32.
Give you library name and report name
And click on the column (application tool bar or F7) button then place the curser on the screen where you want column (please note you have to keep curser on the header section u2013Red column text) right click and insert element. Then you select formula as selection element and enter. You will get the enter formula box. Then you can type your formula and continue. This will add new column to the report.
How to enter formula: you can see the formula components in that id and description.
Id is columns that are present and description indicates explanation of that column.
Enter formula according your requirement.
Examples:
Enter formula screen:
ID : des
X001 amount
X002 pt000
X003 test
1. Enter formula as: ( X001 u2013 X002)
The above formula is for fist column u2013 second column.
2. ( ( X001 u2013 X002) / X003) * 100
First column u2013 second column and devide by third column after that multiple with 100.
Hope this will help you
Regards
Manohar -
GRCT HOW TO ADD Z TABLES IN REPORT PAINTER
Hi Gurus
Could you please send me information about how to activate z tables in report painter ? someone said me that i can user transaction GRCT to do that...¿ what aspects must I consider to add a table ?
mail: [email protected]
Regards
Andrés Morenohi Andres,
below are the steps for the Report Painter.....
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Overscore checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01 (Plan)
Version 0 (Actuals)
Valuation 0 (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
Assign the points....
Ranjit
Maybe you are looking for
-
Messages sent on device do not show up on Mac in ICloud Sent folder - Why?
When I send a message on my IPad, it shows up on the Cloud, but does not appear in my Sent folder in Mail on my Mac ICloud mail account
-
92010NT_Disk1.zip won't download
Trying to download 92010NT_Disk1.zip (9.2 RDBMS for NT disk 1), and not being successful. Disks 2 and 3 come in fine, but 1 will either die at 99% downloaded, or will complete, but when we try to unzip it, it complains that it's an invalid file type.
-
Where do I find the Foncall plugin?
I have the plugin, but I need it for one of my partners. He cannot find it.
-
How do you get rid of master password promt box?
How do you get rid of the master password prompt box without getting rid of using the master passwords feature? I like that my passwords are locked so no one can see them but I get annoyed when I have to type my master password in every time I open u
-
How create an exe-file including Flash-Player?
Hi, I'm a beginner in Captivate and I have to develop an elearning course about our software tools. It has to be distributed to clients by a server. But the user don'T have internet access and admin rights to install the flash player! Is there any so