How to add someone to a conference call half way in another call on a Mac?

Hi Skype Community, I have been using Skype on a Windows machine and it's very easy to add someone to a conference call while on a call. I am having trouble figuring out how to do so on a Mac. Understand that you have to create a Group with the intended people, then initiate the call at the same time. However, I would like to be on a call with Person A first, then add Person B and/or Person C. Is there any way to do so on a Mac? Many thanks in advance. pklai

Hi:
Thank you for reply to my question.
I have tried your codes and apply them the following the form. However, I always got the following error:
Error: (WWV-00000)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
My codes is:
declare
request_no number;
blk varchar2(30) := 'DEFAULT';
l_url varchar2(4000);
begin
request_no := p_session.get_value_as_NuMBER(
p_block_name => blk,
p_attribute_name => 'A_WORK_REQUEST_ID');
l_url := 'portal30.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=11880470335&p_arg_names=_sessionid&p_arg_values=&p_arg_names=work_request_id&p_arg_values='||request_no;
portal30.wwa_app_module.set_target(l_url,'call');
end;
then,
I created another form which has two fields and the dattype of pk is varchar2 and change manually put the pk's p_arg_value into the url.
e.g.
l_url:='PORTAL30.wwa_app_module.link?p_arg_names=_moduleid&p_arg_values=9029417810&p_arg_names=WORK_AREA_CD&p_arg_values=APP';
portal30.wwa_app_module.set_target(l_url,'call');
However, I still get the error message as below:
Error: (WWV-00000)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
No conversion performed for type INTEGER, value . (WWC-49102)
Your help would be highly appreciated.
Wei Ye

Similar Messages

How can I shut down an epson printer half way through its cycle?

How can I shut down an epson printer half way through its cycle?

Command .(period) used to do the trick.

How to add security credentials to SOAP header for EBS Web Service call..

All,
I am trying to invoke a webservice that I successfully exposed as a WSDL Web Service using EBS Integrated SOA Gateway. I am using OBIEE 11g Action Framework which uses WebLogic.
Here are the steps I completed:
- I exposed a WSDL web service in EBS R12 via Integrated SOA Gateway
- I granted the access to this service in EBS R12 to user SYSADMIN
- I used OBIEE 11g to make a Action to call the Web service (using Action Framework) by searching for the WSDL
- When I try to execute the action: I get the error:
Action could not be invoked.
ServiceExecutionFailure :
Error invoking web service HR_PHONE_API_Service at endpoint http://ip-10-87-33-3.ec2.internal:8000/webservices/SOAProvider/plsql/hr_phone_api/ Missing <wsse:Security> in SOAP Header
PROBLEM: I am unsure how to add the credentials for SYSADMIN user and password to add the SOAP username/pwd to the outgoing call. Anyone on this forum know how to set up the SOAP to call with the correct credentials? I have been looking at the documentation but it is not clearly explained.

Dear Heiko,
did you solve this problem?
We are facing the same problem. Every parameter that requries "cmd" does not work. I guess we don´t use this paramter the right way.
Best, Chris

Is there a way to keep the call on mute when another call rings in?

I have my phone on mute for a conference call and then I get another call. The call waiting comes up and I ignore the call. When I do this, the mute turns off. Very big problem the first time it happened since I didn't know and my kids were in the car with me. I've looked at all the settings and the only thing I can think of would be to turn off call waiting, but I don't really want to do that. Any thoughts?

yeah. just discovered this software bug. I never had this happen on the iphone 3G, but now on my iphone 4, if I'm muted and receive another call that I dont answer, or ignore, it automatically unmutes me on the original call.
agghh.
so annoying.

TS4009 My new apple iPhone 5 and my new ipad will not backup to iCloud. Call support and have another call, as apple can not identify the. Issue? Any suggestions??

Can not backup to iCloud on new iPhone 5 or my new ipad. So far apple can locate problem . Any ideas.

I am logged into Icloud on both devices. There is plenty of storage. My Iphone5 has never backed up automatically or manually. It is plugged in and on Wifi. The message is always backup did not complete. My new ipad backed up once on 10/29/12 and does exactly the same thing as my phone. If you start the backup manually it stops after 10-20 minutes and says did not complete back up. I have made sure my login password is the same on both devices....I was bumped up a level last night on Apple Support call and she could not figure it out. We have another call tonight. So far I have no backup of my contacts and do not know what the issue is.

How to add Abap program in process chain to check the another process chain status and do accordingly

Hello All,
My requirement is related to process chain 1 . I have one process chain in that i have to put abap program in middle of that chain . This program will check the status of one another process chain 2 status ( whether it was completed or it is going on). if it is completed then continue the Process chain 1 to further activity else wait to complete Process chain 2 .
Here i have to use process chain 2 as a parameter.
Kindly provide me solution .
Regards
Saurabh

Hi Saurabh,
You need to create ABAP program in which you check the values for required process chain in
following table
RSPCLOGCHAIN (Feilds ANALYZED_STATUS LOG_ID)
Depend on values you can trigger next process or you can wait unitil this process chain complete.you need to check status from table using ABAP.
If you are not aware about how to write ABAP program then take help from ABAP Team.
Regards,
Ganesh Bothe

How can I transfer iPhoto files from one admin user to another on the same Mac?

i created a new admin user on my computer, so now my husband has one and so do i. how can i transfer our iphoto files from his admin user to mine as a shared file? i was able to do this with itunes easily but i am not able to do it with iphoto.

You want to share the Library?
For iPhoto 09 (version 8.0.2) and later:
What you mean by 'share'.
If you want the other user to be able to see the pics, but not add to, change or alter your library, then enable Sharing in your iPhoto (Preferences -> Sharing), leave iPhoto running and use Fast User Switching to open the other account. In that account, enable 'Look For Shared Libraries'. Your Library will appear in the other source pane.
Any user can drag a pic from the Shared Library to their own in the iPhoto Window.
Remember iPhoto must be running in both accounts for this to work.
If you want the other user to have the same access to the library as you: to be able to add, edit, organise, keyword etc.
Quit iPhoto in both accounts. Move the Library to the Users / Shared Folder
(You can also use an external HD set to ignore permissions, a Disk Image or even partition your Hard Disk.)
In each account in turn: Double click on the Library to open it. (You may be asked to repair the Library Permissions.) From that point on, this will be the default library location. Both accounts will have full access to the library, in fact, both accounts will 'own' it.
However, there is a catch with this system and it is a significant one. iPhoto is not a multi-user app., it does not have the code to negotiate two users simultaneously writing to the database, and trying will cause db corruption. So only one user at a time, and back up, back up back up.

Does anyone else have trouble hearing the person you're talking to half way through the call?

Hello everyone. For almost 2 years now I have had this ongoing problem. I have called Verizon several times, stopped by the store several times and no one has been able to help me yet. I will be on a call and all of a sudden I can't hear the person talking on the other end but they can still hear everything I am saying. I have tried many times to figure out if there is something in common about the calls but there never is. I talk to people that are on land lines, cell phones from various wireless providers, I called them, they called me, day, night, different towns, different states - many, many scenarios. Same thing all the time. Sometimes it happens when I'm on the phone for one minute, 30 minutes, one hour - sometimes it never happens. I used to have the Verizon thunderbolt. I had it for about 10 months before it started happening. I put up with it until I was at my 2 year mark and upgraded to an IPhone 5. One hour after walking out of the store with the new phone it happened and has been happening still for the last year. I'm not lying when I say I have spent HOURS on the phone with Verizon and their technicians. The customer service reps always promise to call me back and they say "Don't worry I won't drop the ball. I'll call you when I get in on Saturday" and blah, blah, blah. My phone is used for work and it's embarrassing when you have to tell the attorney or anyone else for that matter to call me back because you can hear me but I can't hear you. I am beyond frustrated and am considering breaking my contract. Wish I could figure out on here how much that would be. HAS ANYONE HEARD OF THIS ISSUE BEFORE??? PLEASE HELP..

I'm sorry to learn that you have endured the audio issues outlined in your post for almost 2 years SusanLM1! This is certainly not normal! Let's get to the bottom of this issue, first please confirm your phone model; your mention that you have the iPhone 5 but your post is on the iPhone 5S forum. Also, share the iOS version currently installed on your phone. What is your ZIP code? Does this happen mainly while you make/receive calls from a particular location (home, office, etc)?
AntonioC_VZW Follow us on Twitter at www.twitter.com/VZWSupport

Iphone's mic switching off half way through a call ?

Basically when I am talking to someone all of a sudden my mic switches off and they can't hear me but i can hear them and it wont switch back on ?? Any one had this problem or have any ideas why this might be happening ??

i just wrote a coment about that i can hear the other person but they cant hear me i have no idea how to get it back on

Add someone to POSDM alert list in BIQ

Hi all experts,
I can receive POSDM alert from BIP/BID, but can't receive POSDM alert from BIQ. What do I config to let me recive that alert in BIQ
Sorry for asking such a simple question.
Thanks.

Thanks for santosh's help.
I just want to know how to add someone to POSDM alert list in BIQ

How to add dynamically called files to a teststand workspace?

I am using TestStand 4.1.1 and LabVIEW 8.6.1 to try and install dynamically called VI's into a TestStand workspace. I am following the instructions on pp. 14-8 through 14-10 in the TestStand Reference Manual (May 2008) edition. So far I have not been successful, and the instructions are not clear. For example, I cannot see in the instructions anywhere that I am supposed to add my test sequence. Should the test sequence already be loaded in the project before this set of instructions is followed? Could someone clarify this set of instructions for me?
Then when I get a successful build, I would like to try out the deployment and installation on a target computer. Please provide a detailed and clear set of instructions on how this can be accomplished.
Also, is there anyway to do this without building an installation? Originally I just wanted to create the deployment without an installation. But please explain both ways.
Thank you.
epsilon-delta

Epsilon,
What are you using dynamically called VI's for? Are you adding dynamic VI's to LabVIEW, or to TestStand? If you are calling from TestStand, you don't need to do anything, the deployment utility will do all of the work for you. The section on adding dynamically called files to a workspace listed in the Test Stand Reference Manual is a mini-tutorial, and not exactly step by step instructions. All you need to do to add dynamically called VI's is to add them to your workspace file, and make sure the TSW is saved before you build your deployment. The example right before that one, covers how to deploy from a TSW, and mentions that you need to add your sequence file to the project that is in the workspace.
The steps needed to deploy a sequence is as follows:
1. Create a new workspace file
2. Right click on the workspace file and select "Add a project"
3.
Right click the project and select add additional files (here you
should add your sequence file and any files that are dynamically called
(e.g. VIs))
4. Go to Tools --> Deploy TestStand System
5. Check "Deploy Files from TestStand Workspace File"
6. Select the appropriate file path where you saved the workspace file
7. Add in a path for the location you want to store your deployable image (for instance your desk top)
8.
Go to the distributed files tab and select "yes" to analyze the source
files [here you will find all the files you chose to include with your
distribution, this is automatically populated from the workspace and
its dependencies), if you are deploying and plan on using a User
Interface and not the TestStand Sequence Editor, here you would need to
include the UI as well
9. If you were making an installer, you
could check the "Create installer" box under installer options and
specify a location. Also here you could click on the drivers and
components box to add additional driver installation (only if you are
building an installer)
10. Click on build status, then build
You can also reference the same manual 14-7 through 14-8 which goes through an example deployment, and installation on a target computer.
After you build your installer, copy the files to the target computer and run the setup.exe to install to the new computer, what problems do you have? Do you get errors, and if so can you take screenshots of them?
If you do not wish to create an installer, and you already have a user interface installed, and the TestStand engine on your target machine, you can just copy all of your files to the target machine, and run them normally. We generally recommend building installers, so that any missing dependencies on the target system could be installed, and the TestStand deployment tool takes care of pulling out all the needed files for you (except for the dynamiclly called ones, which is why you need to add them yourself). If you want you can use the deployment tool to create an image and then move that image to the target computer. The image should have all of your non-dynamic files included, but still requires that your system have all needed components installed. Please let me know what part of the deployment, installation process you are having errors, and we can help you troubleshoot. I always recommend trying to deploy a very simple example sequence with no code modules, if you are having problems. This is always a good troubleshooting tip that will help to determine if the problem is with one of your systems, or with your specific sequence file.
Richard S -- National Instruments --Applications Engineer -- Data Acquisition with TestStand

How to add a custom button in WD screen to call a workflow in siebel?

Hi All,
We have a requirement to have a custom button at the summary screen(after the rule execution) "Create Opportunity", on clicking on it a new opportunity record should be created in Siebel. As we know the "Save" link calls "PolicyAutomationSaveSession" inbound web service method and saves the information in session table and we can modify the PreSession and PostSession workflows. But we are not sure how it calls the service method and where is the mapping defined.
Can you please help me on how to add a custom button and how to invoke a workflow in siebel side to implement this requirement?
Also is there any document which can help me to add a custom button in screen and to add the code behind the button?
Thanks in advance!!
Regards,
Subhradeep

Subhradeep,
Closing a Web Determinations window is essentially the same as closing any HTML window. It involves javascript, which you would have to add to the Web Determinations templates.
Essentially the javascript command to close a window is {{window.close}} or {{top.close}}
For timing, you might be able to use the setTimeout function of Javascript (see: http://www.w3schools.com/jsref/met_win_settimeout.asp)
At the risk of exposing exactly how bad my javascript skills are, I have attached a super-simple html fragment, a page that closes itself after 3 seconds. It may help you get started in the right direction. In general closing a window is a fairly dubious activity and is often not permitted by certain browsers. This html page at least works in Internet Explorer.
<html>
     <head>
     <script language="JavaScript">
          setTimeout(closeMe, 3000);
          function closeMe() {
               alert("This window will close");
               top.close();
     </script>
     </head>
     <body><B>This window will close in three seconds</B></body>
</html>
{code}

How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

How can I get the option in ma contact to say iPhone when I'm add someone's number that has a iphone?

about messaging http://support.apple.com/kb/HT3529
troubleshooting message http://support.apple.com/kb/ts2755

How to add the parameters onto the reports while calling from forms

Hi all,
I am using oracle forms 10g. I want to call a report from the form.
But i dont know how to add parameters to the url while using
web.show_document();
i have a sample code. But it does not add the forms values onto the url.
DECLARE
v_host varchar2(100);
v_port varchar2(10);
v_parameter_string varchar2(4000);
v_username varchar2(50);
v_password varchar2(50);
v_database varchar2(50);
BEGIN
-- Get the full domain name of the server from the formsweb.cfg
tool_env.getvar('SERVER_URL',v_host);
-- Get the username/password and database from the .env file
tool_env.getvar('APPLICATION_USERNAME',v_username);
tool_env.getvar('APPLICATION_PASSWORD',v_password);
tool_env.getvar('APPLICATION_DATABASE',v_database);
-- If it is localhost then we are running on windows and need to use the windows port, otherwise we
-- are on AIX and need to use the AIX port
IF v_host = 'localhost' THEN
     v_port := '8889';
ELSE
     v_port := '7778';
END IF;
-- Now build the parameter string for running the report
v_parameter_string := 'server=rep_fsprod';
v_parameter_string := v_parameter_string||'&report=AAP_TOTAL_CONTRACT_VALUE_RPT.rdf';
v_parameter_string := v_parameter_string||'&userid='||v_username||'/'||v_password||'@'||v_database;
v_parameter_string := v_parameter_string||'&execution_mode=batch';
v_parameter_string := v_parameter_string||'&comm_mode=synchronous';
v_parameter_string := v_parameter_string||'&destype=cache';
v_parameter_string := v_parameter_string||'&desformat=pdf';
-- Now run the report
web.show_document('http://'||v_host||':'||v_port||'/reports/rwservlet?'||v_parameter_string,'_blank');
END;
Are we able to add the text values in the form from to the URL.
Please let me know....
thanks in advance....
Naveen

hello
read the following white paper http://www.oracle.com/technology/products/forms/pdf/10g/frm10gsrw10g.pdf
cheers
Q

CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?

CAN SOMEONE PLZ TELL ME HOW TO SHUT OFF THE LIGHT FROM FLASHING WHEN I RECIEVE A CALL?

Settings>general>accessibility>led flash alerts off

How to add someone to a conference call half way in another call on a Mac?

Similar Messages

Maybe you are looking for