How to add subscreen in material master

Hi
as the subject line says. i want to add subscreens to the material master view screen. lets suppose i have a sales view 1 screen where you can maintain the tax indicators for the material. this subscreen was hidden and could not see in the material master view. i saw that i could do it with help of some customizations but they didnot worked. so if anyone knows about this please guide me through this.
thanks in anticipation.

hi buddy
u can assign the screens
for screen sequence and subscreens use code omt3b
what u can do is
as per ur exmple of sales view
create a new entry of datascreen then form the subscreen of sales just write the entry of subscreen 4 i.e. for tax indicator on paper
then delete this entry
then add this entry in ur newly created datscreen
u will c ur filed of tax indicator in the new screen
for secondary screens use this code omt3z
try it and let me know i am watching this thred
plz reward if helpful
regards
kunal

Similar Messages

ADD subscreen for material master view

dear all,
kindly tell me from where i can add subscreen to material master view. also tell me from where i can see which industry material master is activated
Regards,
qsm sap
Edited by: qsm sap on May 3, 2008 9:42 AM

Hi,
Follow the path below:
SPRO --> Logistics - General --> Material Master --> Configuring the Material Master
Here you can maintain the Mainscreens, Secondary screens etc..
SPRO --> Logistics - General --> Material Master --> Basic Settings --> Material Types --> Define Attributes of Material Types.
here you can activate the Material Tab Pages with refernce to your Material Type.
Hope this helps..
Regards,
Siva

Error in Excise Data subscreen in Material Master:Foreign Trade-Import Data

SAP Net Weaver ECC6.0
I have added the 'Excise data' subscreen in Material master 'Foreign trade IMport' and 'Foreign Trade Export' tab. But facing the following problem. please help.
There are two buttons called 'More' and 'PreVals' in that subscreen. If I click either of them, it gives an error message as below
"Record 21 MORE does not exist in table T133E
Message no. M3748"
and
"Record 21 J1PR does not exist in table T133E
Message no. M3748"
Kindly help what to do

OK
Lets starts from first step.
Go to OMT3B
1. Copy 21 and make it 91
2. Then from left hand side select Data screens no 15 copy it and make it 91 - Z1
3. Then again go to left hand side Subscreens and copy 6 and make it 91 - 71 - z and assign screen no 2205 and add prograne as SAPLJ1I_MATERIAL_MASTER
save it
Then go to OMBt3E and copy 01 -* HERS * 12 and mahe it 01 -* ROHor FERT * 91 and save it and then check and revert back
regards

How to create Variant Configuration Material Master in SAP PP

Dear Friend's,
Pl 's guide me for How to Create Variant Configuration Material Master.
Give me step by step procedure for Creation of Variant Configuration.If some of you having screen shots for the same with one Example, that will be a very helpful to me for creating VC.
Thanks & Regards,
Sandeep N.Theurkar

Hi,
Eg: Ford car.If a sale order is raised for fiesta lxi model the system should choose red colour & for vxi blue colour respectively.
ie you need to define the characteristic and assign the values .
This characteristic need to assigned to class.
class need to be assigned to material master
1. T.code : CT04(characteristic) FORD_MODEL, Choose single value & entry required tab & give the input as 01 - fiesta_lxi & 02 - fiesta_vxi.( characteristic values)
2.Tcode: CT04, FORD_BODY( another characteristic)
Choose single value , don't click entry required.
01 - Red( characteristic values)
02- Blue
3. Create class T.code : CL02
fiesta_class
type : 300
4. OBJECT DEPENDENCY:
T.CODE : CT04
FORD_MODEL
CLICK VALUES TAB,
IN FIESTA_LXI CLICK THE 'O' meant for Obj dependency, action & extra.
Edit the dependecy,
010 $Self.ford_body = '01'. & save
Repeat the same for FIEST_VXI & instead of '01' give '02' for blue colour.
, then create a ROH as ford_body. & a KMAT material for the car. .
Then create a Super BOM with usage 3 & give component as ford_body
Then use T.code cu41 (Create config profile)
enter a profile name & class 300 & choose class assignment, choose fiest_class ,
Use T.code cu50 to check the values.
Then create a sale order.
Pl. reward if helpful.
Regards,
nandha

How to config varients in material master.

how to config varients in material master.

check this
http://help.sap.com/printdocu/core/Print46c/en/Data/pdf/LOVC/LOVC.pdf
http://www.sap-topjobs.com/VARCONFG%5B1%5D.pdf
http://www.sap-img.com/sap-sd/steps-for-sd-variant-configuration.htm
regards
KI

How to Create report in Material Master that outputs stock

Hi,
How to Create report in Material Master that outputs stock, grouped by Material Type and Plant. The output shows Material No, Storage location, Unit of Measure and Description in addition to group totals. Data was extracted from MARA, MARC, MARD, MAKT,MKPF,
MSEG and T001W.and what are the fields to be used.

hi,
check the transaction MMBE or MC.9..
for mmbe the program is RMMMBESTN.
check the logic in the program.

How to add subscreen(mrp area) to mrp1 view

Hello SAP GURUS,
while creating the material with FERT material type, i found that there was no subscreen containing data for mrp area in mrp1 view.How to add this subscreen in mrp1 view.
I checked all the customization data like maintain screen sequence order,assign material type, industry sector and all to the screen sequence reference.Everything is there,than also couldn't manage.
So if you know the process than plz share.

Hi,
The below link may be useful.
https://wiki.sdn.sap.com/wiki/display/ABAP/ABAPDevelopmentand+Programming
(At the end of the Page) In this all the pages of MM01_Screen Exit PArt 1 and Part2 are useful..
If you click on any one of thm it will lead you to the Attachments where in you can look into all the attachments..
Regards,
Siva

How to add a project into master project by Powershell

How to add a master project and sub-projects powershell
I use project server 2013, I want inserting multiple sub-project plans into a project master

Hello,
You can't do this directly in PowerShell using the PSI etc. as the PSI can't create master projects / insert subprojects. You could however do this in VBA if required or automate Project using PowerShell COM object.
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS

HOW TO TRACK CHANGES IN MATERIAL MASTER

Dear All,
I have changed material master with change number.
Now i want to see both old and new material master.
how to do this?

Dear
Goto MM03/MM02-Enter material code -hit Enviornement at the header -Display Changes -It will display the list of changes WITH DATE TIME -Double Click on the Chekc box to know the details of changes .
Regards
JH

How to activate field in Material Master

Hi,
Can anybody tell me how to activate BRAND_ID field in the material master?
Thanks in advance.
Samir Bhatt

To activate this field i.e you want this feild to appear in your material master screen.You have to follow :
Logistics - General>Material Master>Field Selection>A
ssign Fields to Field Selection Groups
Here you will find that your Feild MARA-BRAND_ID has selection Group 200
Maintain Field Selection for Data Screens in this Step check fo r the Selection group :200 You will get the feild Brand there in the selection group 200.
you can make setting of the feild accordingly as hide /display /........etc

How to set charactersitic in material master as read-only and changable?

Hi experts
We try to change classifcaiton view screen variant. Our target is only one transaction variant could change the classification type z02 ,its characeristic in material master. we hope to know for such case, we could use transaction varaint to meet the target or not ?
We try to use this first, but we use shd0 and click " change in process" button, it will say " variants are possible only for dialog transactions". I checked in se93, it seems this variant maybe is not for dialog transaction .
But how to change such screen varaiant content?Any steps we should follow ?
Thanks
Alice

>
alice zhang wrote:
> Hi
>
> Really appreciated for your help. Does that mean transaction variant maybe is not good to classificaiton view ?
>
i searched in service.sap.com and from what i read this seems not to be the most recommended way to solve such a problem -> see the note i mentionend - but there were others, you might want to search for yourself.
>
alice zhang wrote:
> currently ,we use mm02 with variant A, and zmm02 with variant B which could change material status and descritpion.
>
> Do you mean if we set varaint for classficaiton z02, xxx characteristic, Is it possible ? Or it many impact other classfication type like z01 , and when we exit this screen, the variant will be lost?
>
>
the only way to find out for sure is if you test it thoroughly. i cannot help you there, since i don't know about your setup in classes and characteristics. you might want to try your transaction variant of several different material always trying to change the classification. there's another thing: one material might belong to n classes. test that scenario by adding one material to class z01 and z02 and check how the variant behaves ...
>
alice zhang wrote:
> For authoriiation, it could be set for specific class type and characteristic field?
>
yes it can. maybe you have to do a bit more configuration about classification, especially if you want to group screens etc. -> please refer to help.sap.com for detailed documentation.

How to add trigger on materialized view?

Hi, I'm trying to add trigger on materialized view. I don't know how to do it. I'm new to oracle and PL/SQL. Can you guys put some working example please? Thank you for every advise.

Please check the below link. This answers you query:
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:672989600346945045

Add URL to Material master

Dear Experts,
We need to add more data on our Material Master ,
We can add a URL link in Material Texts Data ,
But This data is text type only
Can we change the text to URL type , so the user will click on it to get the Data ?
Thanks,
Moshe

not possible

Add fields to material Master (MM01)

Hi Experts, after checking OMS2, OMS3, OMS9, OMSA...I still have no idea about how to show some fields in my material master data. They belong to group 103 which is assignet to material type FERT and Basic Data 1. They are setup as "Optional" but they are not shown when I try to create a new material.
I expected to find it easy to solve, as when you modify others screen layouts (p.e. Materials Management> Purchasing>Purchasing Info Record-->Define Screen Layout) but it seems not. Any idea?
Thank you

Hello Cristian,
You cannot define the field selection for an individual field, however,
the fields are grouped together in field selection groups.(Customizing
'Assign Fields to Field Selection Groups') The input/output attributes
are determined per field selection group.For the specification of the
properties of a field selection group, there are several criteria. They
are called field selection references.Not only one criterion (= field
selection reference) is relevant for the definition of the field
selection attributes but SIX criteria are.
Some of the field selection references are hard-coded (for example,
transaction) others can be defined (for example, plant, material
type...).In the following, the six field selection references are listed
and also the transactions in which they can be defined.
1. Transaction (MM01, MM02 ....)
2. Industry sector (you can assign the field selection reference to the
    industry sector by using Transaction OMS3)
3. Material type (You can assign in field FELDREFERENZ by using
    Transaction OMS2.The name of the material type is not automatically
    the field selection reference but it depends on what is on field
    FELDREFERENZ in Transaction OMS2.If the field is empty, there is no
    specific settings for this material type.)
4. Plant (you can assign the reference to the plant in Transaction
    OMSA)
5. Procurement-releated field selection references. There are the two
    field references E (internal procurement) and F (external
    procurement). It depends on the settings in Customizing for the
    corresponding material type under 'Internal/external purchase
    orders' whether one or which one of the field references is used. If
    internal purchase orders are allowed (setting 1 or 2) and external
    orders are forbidden (setting 0), the field selection uses E. If
    external purchase orders are allowed (setting 1 or 2) and internal
    orders are forbidden (setting 0), the field selection uses F. When
    both internal and external purchase orders are allowed, the field
    selection uses neither E nor F.
6. Customer-specific field reference KB (customer-specific
    requirements)
Since a field can have only one attribute at the end (display = '*',
change = '.', hide = '-', required entry = '+') a property must be
determined from these six criteria.You do this by prioritizing the
above-mentioned properties:
The hide function has a greater effect than the display function.The
display function has a greater effect than the required entry function
and the change/ready for input function has the least effect.
If for one of the six mentioned field selection references 'Hide' is
set for the relevant field selection group, all fields which were
assigned to this field selection group are hidden, no matter how the
attributes were set in the other five field selection
references.Therefore, you must always check all six field selection
references.It is not sufficient just to look at one field selection
reference.
If you checked this setting and, however, the field does not have the
display attribute required, then it is possible that the attributes of
the field are hard-coded.
Regards,
Mauro

How to change currency in material master

Could you please tell me multiple way to change currency in material master (mm02/mm02). Currency is under Costing2 tab in material master.
Thanks..

Hi,
In <b>SPRO</b>, u can change the Cuurency.
The Exchange Rate Type is used to store currency conversion rates for different purposes, in the R/3 System.
If the R/3 System is to perform exchange rate conversions between a large number of different currencies, it can be simplified by specifying a base currency per particular exchange rate type. Then specify the exchange rates of all currencies in relation to the base currency for the exchange rate type concerned.
In accordance with legal requirements, the base currency (EUR) must be defined as the From currency for currency conversions within the EMU (European Monetary Union). To do this, set the indicator in the field BCurr = From.
<b>IMG->SAP Netweaver->General Settings->Currencies->Check Exchange Rate Types.</b>
Regards,
Padmam.

How to add subscreen in material master

Similar Messages

Maybe you are looking for