How to add two different background images - left and right

I want to get something like this

The way I have done that is to create the right image as a full width image and then place the left hand image over top and stretch the image to the left hand side of the page.
Use background images on boxes instead of page background. I have done something similiar in the header of this site:
http://www.signalpointdining.ca

Similar Messages

How to add two different page numbers in a single page

How to add two different page numbers in a single page? One is for page number of the whole article, the other one is for page number for each chapter in the article.

It's quite complicated, see
Two Page Numbering Schemes in the Same Document.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

How to add two different images on photoshop cs5?

I was learning about the layers and masks and i seen that i have to have two images under each others under the layer option pannel, i tried many times to add images but it always shows in two different pannels as the folloing image I want to add two different images in this pannel to make any changes i want
Thank you.
image

When you click on that icon Photoshop will add a revail all white layer mask and it will be the Photoshop target. Begin painting with black over the image part you wish to hide. Should you paint away something you want change to white paint and paint it back. Lower the brush opacity to fade in and out the image part.
If you use ALT+Click on that icon a hide all black layer mask will be added as the current taget and hide all of the layer paint with whits to show.

How to add two different database connections on Model

Hi,
In my application, I need to create View Objects on different databases. So I need to add two different database connections on the Model.
But it seems like Model can be connected to only one database. I tried adding another project to add the second db connection. But after I created a read-only View Object in the second project, it didn't generate corresponding data control in the Data Controls panel.
Could anyone help me on this?
Thanks!

Do you mean adding the second project folder in ViewController->Project Properties->Libraries and Classpath?Yes, either that or: ViewController -> Project Properties -> Dependencies
And I didn't see the first Model project in the ViewController classpath. Otherwise it wouldn't work. The first model project IS in 'classpath'. Here's how:
ViewController -> Project Properties -> Dependencies
I tried this and recreated the View Object. Still didn't generate the datacontrol. No idea why you had to recreate the VO.
Is your VO in an application module inside the SECOND project?
After you are sure that everything is in the ViewController's classpath, just try restarting JDeveloper.
This is very basic. has to work.

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

How to make track work in both left and right speaker?

i have an audio track with 2 speakers that each had a lav mic on them. one was recorded into left channel and the other the right channel. so of course when i play back each of their voices only come out of one speaker. pretty new to audition so how do i fix the track so that they each come out of both speakers? TIA

I have to say that, although not uncommon, for TV it depends quite a lot on how things are shot. In a standard interview situation where you might have a 2-shot to establish (with a definite left and right position) then a close up of the interviewee then a cutaway of the reporter and so on, panning can become very confusing and it tends to be better to just put everything in the centre.
Radio is easier because you don't have to be aware of what pictures are showing--but, even there care needs to be taken especially since, as Steve says, a lot of listening is on ear buds or headphones which accentuate any panning. Even in radio, though, choices have to be careful...for example, let's say the host starts with an interview where he's panned slightly right and the guest slightly left. So far, so good. However, then the next two stories are just studio reads...does the host stay panned slightly right for consistency or does he move to the centre possibly causing confusion?
I'm not saying never give positioning clues in a radio or TV mix, just that you always have to be aware of the bigger picture.

How to migrate stored procs accessing columns "LEFT" and "RIGHT"

Hello!
I have to migrate a SYBASE11-Database to Oracle 8.1.7.
How can I migrate Stored Procs that access tables that contain columns 'LEFT' and 'RIGHT'?
OMWB reports a parse error "encountered: ,". If ommit the words 'left' or 'right' or if I write 'left()' or 'right()', it works. But I have to use these columns and we cannot change the database model.
It doesn't work with quoted column names like this: "LEFT" or "RIGHT".
I use OWMB 1.3.1.0.0. Anybody any ideas? Thanks in advance.
Yours, Heiko Kaschube

This is a simple matter to fix.
As the words LEFT and RIGHT are treated as reserved words by the stored procedure parser, they cannot be used successfully as column names within Oracle PL/SQL.
In order to get the stored procedure to parse, you can append an underscore to all references to LEFT and RIGHT e.g.
left_
then right click on the stored procedure name and select 'parse procedure' from the drop-down menu. The procedure will now parse and the generated PL/SQL can be viewed within the Oracle model menu tab.
It will now be necessary to remove all the underscores previously appended to the words 'left' and 'right' from the PL/SQL version of the stored procedure in question. Again, this can be done within the Migration Workbench.
Hope this helps.

Filter -Different texts in left and right section in user help ( F4 )

Hi Friends,
When I try to filter values in Analyzer, different texts are shown in user help for selectable (left window section) and selected (right window section).
In leftsection texts are shown as defined eg, text short , but sfter selecting the value, on the right section text long is displayed.
Example:
If a characteristic Z_IO1 with key 1234,
text short T1
mid.text T123
text long T123456
Now I try to filter:
selectable value is shown as
1234 T1 (setting key and text short)
and after moving it to the right side with blue arrow it changes to
1234 T123456 (same settings) if text long doesn't exist text mid. is shown.
Did smomeone face this Issue or has any idea? Then let me know, please.
And something different is strange : When I try to restrict in BEx Query Designer, system works as expected,
display in left and right section of filter window don't differ.
Thanks in advance for your input.
Best Regards
Joe

Hi Venkat
Thanks for reply. My problem isn't filter value selection controlled by rea mode, it's just the display of the filter value texts (descriptions) in the F$ window for selected items. For me it seems, that it is not to change, default is set. I.e. the longest text available is displayed (according to property in RSD1) without any dependence on required texts (short, medium, ling), as mentioned in my example.
Regards
Joe

How to use two different boot images in the same task sequence

I have a need to use Two boot images in the same task sequence. The reason is I'm deploying ZTI to McAfee encrypted devices which I have already done with McAfee v6 Encryption successfully.
Here's where my problem comes in. We are about to deploy McAfee v7 which means we will have a mix of v6 and v7 in our environment. I must have two special Boot images one with v6 drivers and one with v7 drivers in order for my process to work. I don't see
a way right now to assign more than one boot image to a task sequence. Is there any way to do this?
If I can't do that then I will have to create two task sequences and target collections based on the Endpoint Encryption version to deploy to.
If anyone has suggestions it would be much appreciated. Thank you

Have you tested copying those files to %windir%\system32\drivers during the WinPE session (just enable commandline support to your boot image) to see if they need to be in there before the OS start? Test that and if they don't need to be there during the
boot up of WinPE then:
Create two packages (v6 and v7)
"Run command line", use the package created earlier and just use "copy /Y .\*.* %windir%\system32\drivers" ...again, this should be run according to your needs, variable or some other check like I said

How to add Two incorrect feedbacks in Drag and drop in captivate 7.

Hi
I want to show two different incorrect feedback in drag and drop interaction in Captivate 7. Currently we can show only one even though i have increased the drag and drop attempts to 2. I want to show a try again feedback and incorrect feedback with correct options and this should not be there when the learner re-visits this slide.
Note: I am already using a success caption and have executed the action - "On Enter" to "Hide" this success caption.
Please help me with this.

Hi Sreekanth,
You understanding is correct. But,it is not even necessary to show the correct sources on correct targets along with the feedback... the correct option numbers in incorrect feedback will do.
reg point number 3, if I revisit the slide, the feedback are still displayed. For example, in this case, I added a correct feedback, but when I revisit the slide, the feedback was still appearing. So I added this action "On Enter" to "Hide" this success caption. So that is why i told specifically that none of the feed backs should be there when i revisit the slide.
Sorry Srikanth - I am not familiar with the advanced actions or variables. I have just used some from referring the examples from net. that's all

How to make mono recording play both left and right channels

I have an old mono recording that plays only on the left channel. How can I copy it to play on the right so I'll hear it on both channels? I put it on itunes and then tranferred it to Garageband in hope I could finally get it to play on both channels. I've tried everything in Garageband and nothing works. It seems simple to me, just duplicate the one channel to the other. Garageband says if you use the compressor it will play in both channels, but it won't. Any ideas? It's a recording from a band I was in back in 1966. We used state of the art reel to reel but it was mono! All these years I've tried to figure how to fix it. Thanks

I already recorded it from the tape to CD Spin Doctor through the line in and as I said it only comes out on the left channel. So then it's on itunes and I then transfer it to Garageband but it still is only on the left channel.I guess I could do this the old fashion way and get a mono plug to re-record to Spin doctor but in this day and age of sophisticated computer software I thought there may be an easier way. I guess I wasted my money thinking Garage band would help me edit this recording. Oh well, such is life!!!!

How to add two columns in OBIEE report?

Hi to All,
Can anyone tell me how to add two columns in OBIEE report and get that result in a new column?
Thanks in Advance,
Thenmozhi

Assume you already have two columns SalesAmt1 and SalesAmt2, and you want to derive 3rd column say SalesAmt3 which would be the sum of SalesAmt1 and SalesAmt2.
For this, as I mentioned above pull SalesAmt1 and SalesAmt2 columns in Report. Now pull another column (say SalesAmt1) and open the fx. Clear the contents of fx. Now locate the columns button in the bottom of the fx. From Here, first select SalesAmt1 and + sign and the select SalesAmt2.
Now in this new column, the fx should look like SalesAmt1 + SalesAmt2.
Let me know if you are looking for something else.
Thanks

How do I apply effects equally to the left and right channels.

I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
Thanks!

How to add different background image for submenu items???

Hi all,
I'm pretty new to web design and CSS in particular. Here's my problem...
I've got a Spry horizontal menu bar (untouched as yet), and I want to have a different background image for my submenu items than that of my menu items. From searching the internet I think that I need to apply a class to the submenu item (please correct me if I am wrong).
How would I go about doing this and how would I assign the class to just the submenu items?
Also ideally I want to have my first and last menu items to have rounded corners on one side (therefore making a rounded edge menu bar), is it possible to have a different background image for individual menu items? If so, how?
Really appreciate any help!

Thanks for the link! I've managed to sort the background issue, and it seems to be working fine!
Just one little issue left to tackle...
I want my text to be centered in my top menu items BUT aligned left in my drop down menu items. I have managed this but the text hugs the left hand side. I've tried adding a little margin to the left but that doesn't seem to affect anything???
Here's my CSS... Any ideas which class I should be targeting or why adding the margin isn't working would save my tearing the rest of my hair out! thanks! (screenshot attached).
@charset "UTF-8";
/* SpryMenuBarHorizontal.css - Revision: Spry Preview Release 1.4 */
/* Copyright (c) 2006. Adobe Systems Incorporated. All rights reserved. */
LAYOUT INFORMATION: describes box model, positioning, z-order
/* The outermost container of the Menu Bar, an auto width box with no margin or padding */
ul.MenuBarHorizontal
    margin: 0;
    padding: 0;
    list-style-type: none;
    cursor: default;
    width: auto;
/* Set the active Menu Bar with this class, currently setting z-index to accomodate IE rendering bug: http://therealcrisp.xs4all.nl/meuk/IE-zindexbug.html */
ul.MenuBarActive
    z-index: 1000;
/* Menu item containers, position children relative to this container and are a fixed width */
ul.MenuBarHorizontal li
    margin: 0;
    list-style-type: none;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: 120px;
    float: left;
    height: 24px;
    padding-top: 0;
    padding-right: 0;
    padding-bottom: 0;
    padding-left: 0;
    background-repeat: repeat-x;
    background-color: #333333;
    background-image: url(../images/navbar_bg.jpg);
    border-right-width: 1px;
    border-left-width: 1px;
    border-right-style: solid;
    border-left-style: solid;
    border-right-color: #000000;
    border-left-color: #666666;
ul.MenuBarHorizontal li li
    list-style-type: none;
    position: relative;
    text-align: left;
    cursor: pointer;
    width: auto;
    float: left;
    height: 24px;
    background-color: #333333;
    background-image: none;
    padding: 0;
    margin: 0;
    left: -1px;
ul.MenuBarHorizontal li li a
    list-style-type: none;
    position: relative;
    text-align: left;
    cursor: pointer;
    float: left;
    height: 24px;
    background-image: none;
    font-size: 12px;
    font-weight: normal;
    border: 0px 0 0;
    width: 120px;
    font-family: Geneva, Arial, Helvetica, sans-serif;
    padding: 0;
    margin: 0;
/* Submenus should appear below their parent (top: 0) with a higher z-index, but they are initially off the left side of the screen (-1000em) */
ul.MenuBarHorizontal ul
    margin: 0;
    list-style-type: none;
    font-size: 100%;
    z-index: 1020;
    cursor: default;
    width: 120px;
    position: absolute;
    left: -1000em;
    height: 24px;
    padding-top: 0;
    padding-right: 0;
    padding-bottom: 0;
    padding-left: 0;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to auto so it comes onto the screen below its parent menu item */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible
    left: auto;
/* Submenus should appear slightly overlapping to the right (95%) and up (-5%) */
ul.MenuBarHorizontal ul ul
    position: absolute;
    height: 24px;
    width: 120px;
    margin-top: -5%;
    margin-right: 0;
    margin-bottom: 0;
    margin-left: 95%;
/* Submenu that is showing with class designation MenuBarSubmenuVisible, we set left to 0 so it comes onto the screen */
ul.MenuBarHorizontal ul.MenuBarSubmenuVisible ul.MenuBarSubmenuVisible
    left: auto;
    top: 0;
/* Menu items are a light gray block with padding and no text decoration */
ul.MenuBarHorizontal li a
    display: block;
    cursor: pointer;
    text-decoration: none;
    font-style: normal;
    text-transform: capitalize;
    text-align: center;
    white-space: normal;
    padding: 0px;
    height: 24px;
    font-family: Geneva, Arial, Helvetica, sans-serif;
    font-size: 12px;
    font-weight: bold;
    color: #FFFFFF;
    line-height: 20px;
    margin: 0px;
/* Menu items that are open with submenus are set to MenuBarItemHover with a blue background and white text */
ul.MenuBarHorizontal li a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #000000;
    background-image: url(../images/navbar_bg_hover.jpg);
    background-repeat: repeat-x;
    line-height: 22px;
ul.MenuBarHorizontal li li a.MenuBarItemHover, ul.MenuBarHorizontal a.MenuBarItemSubmenuHover, ul.MenuBarHorizontal a.MenuBarSubmenuVisible
    background-color: #000000;
    background-image: none;
    background-repeat: repeat-x;
    width: 120px;
    font-family: Geneva, Arial, Helvetica, sans-serif;
    font-size: 12px;
    font-weight: bold;
    color: #FFFFFF;
/* Menu items that have a submenu have the class designation MenuBarItemSubmenu and are set to use a background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenu
    background-repeat: repeat-x;
    background-position: 95% 50%;
    background-color: #333333;
    background-image: url(../images/navbar_bg.jpg);
/* Menu items that are open with submenus have the class designation MenuBarItemSubmenuHover and are set to use a "hover" background image positioned on the far left (95%) and centered vertically (50%) */
ul.MenuBarHorizontal a.MenuBarItemSubmenuHover
    background-repeat: repeat-x;
    background-position: 95% 50%;
    background-color: #000000;
    background-image: url(../images/navbar_bg_hover.jpg);
BROWSER HACKS: the hacks below should not be changed unless you are an expert
/* HACK FOR IE: to make sure the sub menus show above form controls, we underlay each submenu with an iframe */
ul.MenuBarHorizontal iframe
    position: absolute;
    z-index: 1010;
/* HACK FOR IE: to stabilize appearance of menu items; the slash in float is to keep IE 5.0 from parsing */
@media screen, projection
    ul.MenuBarHorizontal li.MenuBarItemIE
    display: inline;
    f\loat: left;

How to add two different background images - left and right

Similar Messages

Maybe you are looking for