How to migrate stored procs accessing columns "LEFT" and "RIGHT"

Hello!
I have to migrate a SYBASE11-Database to Oracle 8.1.7.
How can I migrate Stored Procs that access tables that contain columns 'LEFT' and 'RIGHT'?
OMWB reports a parse error "encountered: ,". If ommit the words 'left' or 'right' or if I write 'left()' or 'right()', it works. But I have to use these columns and we cannot change the database model.
It doesn't work with quoted column names like this: "LEFT" or "RIGHT".
I use OWMB 1.3.1.0.0. Anybody any ideas? Thanks in advance.
Yours, Heiko Kaschube

This is a simple matter to fix.
As the words LEFT and RIGHT are treated as reserved words by the stored procedure parser, they cannot be used successfully as column names within Oracle PL/SQL.
In order to get the stored procedure to parse, you can append an underscore to all references to LEFT and RIGHT e.g.
left_
then right click on the stored procedure name and select 'parse procedure' from the drop-down menu. The procedure will now parse and the generated PL/SQL can be viewed within the Oracle model menu tab.
It will now be necessary to remove all the underscores previously appended to the words 'left' and 'right' from the PL/SQL version of the stored procedure in question. Again, this can be done within the Migration Workbench.
Hope this helps.

Similar Messages

Flash cs3: how to make moving/scrolling photo menu left and right?

http://media.moma.org/subsites/2008/miro/flashsite/index.html
- click continue, then relative size link
How can I do this with lash cs3: how to make moving/scrolling
photo menu left and right?
When you move left and right and paintings move. and when you
click on a painting, you see the the title and it links to another
page on the site.

scene_mc start at x = -550... x wide is 2164 px
now I have this and its working...
navL_mc.addEventListener(MouseEvent.MOUSE_OVER, navL_Over);
navL_mc.addEventListener(MouseEvent.MOUSE_OUT, navL_Out);
function navL_Over(e:MouseEvent){
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
                              navL_mc.addEventListener(Event.ENTER_FRAME, runL);
function runL(e:Event):void{
          if(scena_mc.x == 0){
                              scena_mc.x == 0;
          else if(scena_mc.x <= -10){
                              scena_mc.x += 10;
function navL_Out(e:MouseEvent){
          navL_mc.removeEventListener(Event.ENTER_FRAME, runL);
navR_mc.addEventListener(MouseEvent.MOUSE_OVER, navR_Over);
navR_mc.addEventListener(MouseEvent.MOUSE_OUT, navR_Out);
function navR_Over(e:MouseEvent){
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
                              navR_mc.addEventListener(Event.ENTER_FRAME, runR);
function runR(e:Event):void{
          if(scena_mc.x == -1164){
                              scena_mc.x == -1164;
          else if(scena_mc.x >= -1154){
                              scena_mc.x -= 10;
function navR_Out(e:MouseEvent){
          navR_mc.removeEventListener(Event.ENTER_FRAME, runR);

How do I deal with audio, seperate left and right and make each stereo--CS5

I have a two mono mike recording which I can seperate into two seperate audio timeline tracks one is now left track in a seperate timline and the other is right in the other timeline, how do I make each of these tracks then into psuedo stereo tracks? Do I have to go to Soundbooth or is there a simple way in Premiere?

Bill G, tell me what I am missing and I'll use your method. I have what I think you are describing, and I don't understand the need to do anything special, if you use channel mapping.
I record a lav on one channel, and a different wireless mic on the other. When captured, I have a clip that PR would normally treat as a single stereo track.
BEFORE putting any clips on the timeline, select all clips and set channel mapping. Set each channel to mono. Now PR treats these as two mono tracks. The output for each mono is the master track, which in my project is stereo. I can change "volume" for each track in the mixer, etc. but each channel is provided to the left and right master output.
I didn't go back to sort out what you had, but if you had two stereo tracks, one each with a left and right channel only, I can see that you needed some other solution.

How to make track work in both left and right speaker?

i have an audio track with 2 speakers that each had a lav mic on them. one was recorded into left channel and the other the right channel. so of course when i play back each of their voices only come out of one speaker. pretty new to audition so how do i fix the track so that they each come out of both speakers? TIA

I have to say that, although not uncommon, for TV it depends quite a lot on how things are shot. In a standard interview situation where you might have a 2-shot to establish (with a definite left and right position) then a close up of the interviewee then a cutaway of the reporter and so on, panning can become very confusing and it tends to be better to just put everything in the centre.
Radio is easier because you don't have to be aware of what pictures are showing--but, even there care needs to be taken especially since, as Steve says, a lot of listening is on ear buds or headphones which accentuate any panning. Even in radio, though, choices have to be careful...for example, let's say the host starts with an interview where he's panned slightly right and the guest slightly left. So far, so good. However, then the next two stories are just studio reads...does the host stay panned slightly right for consistency or does he move to the centre possibly causing confusion?
I'm not saying never give positioning clues in a radio or TV mix, just that you always have to be aware of the bigger picture.

How to make mono recording play both left and right channels

I have an old mono recording that plays only on the left channel. How can I copy it to play on the right so I'll hear it on both channels? I put it on itunes and then tranferred it to Garageband in hope I could finally get it to play on both channels. I've tried everything in Garageband and nothing works. It seems simple to me, just duplicate the one channel to the other. Garageband says if you use the compressor it will play in both channels, but it won't. Any ideas? It's a recording from a band I was in back in 1966. We used state of the art reel to reel but it was mono! All these years I've tried to figure how to fix it. Thanks

I already recorded it from the tape to CD Spin Doctor through the line in and as I said it only comes out on the left channel. So then it's on itunes and I then transfer it to Garageband but it still is only on the left channel.I guess I could do this the old fashion way and get a mono plug to re-record to Spin doctor but in this day and age of sophisticated computer software I thought there may be an easier way. I guess I wasted my money thinking Garage band would help me edit this recording. Oh well, such is life!!!!

How to add two different background images - left and right

I want to get something like this

The way I have done that is to create the right image as a full width image and then place the left hand image over top and stretch the image to the left hand side of the page.
Use background images on boxes instead of page background. I have done something similiar in the header of this site:
http://www.signalpointdining.ca

How to make those shadowed borders left and right of your page?

Hi, Can someone tell me if I am on the right track? Here's what I've done so far. I've specified the background colour in the properties section. I've set up a 3 column table (fixed size) that has small columns left and right and a big one in the middle. For those small columns I've pickwhipped to 2 small gifs with the shadow. Previewed in Safari and everything looks ok.
My question: is this the best way to do this? Or does it need a CSS approach? And if so, how?
Now I want to give the bottom a shadow as well. Do I proceed in the same way? So make a left corner, right corner and a bottom? I'm working with GL CS2.

The best way to slice things up depends on how the page is layed out. If the content area has a fixed width that centers (or doesn't), then might make more sense to have 3 vertically stacked divs with the background and drop shadows, then nest another div in the middle with margins for the actual content. Or, if the content size is completely fluid, the same structure could still work with floating divs (or absolutely positioned relative to a single container?) holding the corner images. Or there's always the old-school tables way of slicing things up (though I'd avoid that).
There's more than one way to do it, and I don't know that any single option is necessarily the "right" way to go... as long as it works and validates?

How do I apply effects equally to the left and right channels.

I am an intermittent user of Sound Track Pro. I've made some cool audio beds with it in the past but right now I'm having two problems since I have not used it in so long and never was pro with it to begin with.
1. Seems like the lift and stamp tool only works in multi-track mode and not in the wave editor.
2. so I put my file in the wave editor to redo the effects from scratch there but now I don't know how to apply them equally to the left and right channels.

Thank you! One more question: I've got quite a bit of interview tape and would like to increase the playback speed to 1.5X or 1.75 x so that I can get through everything faster. Is there a way to set it at those tempos? I only see the 2X, 4X, 6X, etc. options, but these are too fast and I can't understand what is being said. Is there a way to set this to 1.5X the original speed?
Thanks!

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

How can I separate Left and right audio channels in labview 8.5 tia sal22

How can I separate Left and right audio channels in labview
8.5 tia sal22
Greetings All
I have a working Labview vi that converts a math formula to an
audio signal. I would like to have the
right and left audio channels playing different math audio signals is this
possible?
Example
Right channel -> plays the audio signal created by a math
formula
Left channel -> plays the audio signal created by another
math formula with adjustable phase control
I’ve included a VI with a working audio and math formula but
I’m not sure how to separate the left and right channels.
I’m using labview 8.5
I looked up a similar question on the
support board and it said” use an instance of the the Sound Output Write that
has a 1D waveform data type input (i.e. Sound Output Write (DBL)). Each
element in the array would correspond to a channel.”
But I’m not exactly sure what he meant. I’m using a formula to generate the wave file
Tia sal22
Attachments:
fixed mathscript formula to sound test.vi ‏680 KB

Sorry it took so long to get back. Here's the new VI with it splitting out the left and right channels.
I'm using a Gigaport HD 8 output usb audio device but I'm experience clicks and pops. I increase the buffers
but I still get the clicks and pops. I know gigaport HD can use ASIO drivers which most likely would solve the problem but one needs to code in C for this which I'm not proficient in. Can someone recommend a work around to prevent this clicks and pops, can I somehow change my VI to fix this? Does anyone have a VI that will allow access to the ASIO latency properties?
I'm using labview 8.5
And a gigaport HD which is a USB audio device which outputs 8 analog signals (it is ASIO compatible)
tia sal22
Attachments:
lvt_audio_realtime-out left right device ID test.vi ‏68 KB

How to split left and right sound signal from SI READ Stereo?

How to split left and right sound signal from SI READ Stereo?
I want to display the left and right sound signal in two graph separately,what shall I do?
That is how to split 2D arry to two 1D arry?

Hello,
Here's another trick...although the "Index Array" suggestion will work, you should investigate using the "Delete from Array" function...you can tell it to delete one of the columns (or rows), leaving one column (or row)...the function will output both the resulting array AND the deleted array, which happens to be the other row/column...this method might not be as intuitive, but it only makes one copy of data in memory, while the Index Array method makes two copies.
I hope this suggestion helps. I only found out about this trick with "Delete from Array" the other day.
Have a great weekend!
Sincerely,
Darren Nattinger
Applications Engineer
National Instruments
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

Want left and right column div 's to expand vertically with content div

I have 3 sections within the body - left column, content, and right column. I want the left and right columns to expand vertically down to the footer as far as the content section goes. Does anyone know how to do this? I have looked at several help discussions to no avail.
thanks,
- Pat

I have the same problem, will share if I find it!

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

I have a video I 'm editing and some of the shot taken (on the left and right) I would like to remove. Is this possible to do ? If so, how?

If you mean there are parts of the picture at the sides you want to remove, you have at least 2 choices.
You can mask the edges of the frame or enlarge it so that the left and right sides are outside the picture area.
The latter suggestion will reduce the quality of the video and you will also lose an equal amount from the topand bottom, though you could slide the image up or down.

How do I plot a y axis on the left and right in DIAdem/VIEW (version 11.0)?

I am trying to analyze flight data, and I would like to analyze plots of certain parameters so that they share an x axis. It is necessary to view these using two different y axis, on the left and right. How do I do this in DIAdem (version 11.0) in the VIEW tab? Is this possible to do in the VIEW tab?

myocom,
You can highlight random points in DIAdem as well.
Here is an example:
Use the cursor to move to the point you wish to highlight.
Press the "Set Data Point and Flag" icon on each data point you wish to highlight
When you are done selecting points, press the "Flags: Copy Data Points" icon - that will copy all X/Y coordinates into two new channels
I created a REPORT Layout using the original data and the highlighted random points (I added the actual point Z-value above the point, they look strange when written at the exact point). I attached the layout for your reference.
The complete task took 3 minutes from loading the data to finishing and exporting the REPORT layout. If you have a REPORT layout already, this will take less than 30 seconds ...
I am not familiar with Matlab, so I can't compare how this works in DIAdem vs. Matlab. You can add the combine the complete process in a Script and it will automatically create this kind of report after simply selecting a few data points in VIEW and then pressing a button ...
Otmar
Otmar D. Foehner
Business Development Manager
DIAdem and Test Data Management
National Instruments
Austin, TX - USA
"For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."
Attachments:
Report with highlights.zip ‏5 KB

How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

How to remove a click from a sequence file mp4 or mp3, and make it only sequence left and right in GarageBand?

"adrianTNT" <[email protected]> wrote in message
news:e6aitv$hkm$[email protected]..
>
quote:
Originally posted by:
kglad
> you're welcome. with your solution loading another mp3,
are you sure it stops
> the download of the first mp3?
> Yes, it seems to work fine, it loads another sound in
same sound (my_sound)
> and it seems to replace loaded progress with the empty
sound I gave and stops
> previous loading.
> I look at traffic icons on task bar and I see that there
is no network traffic
> after I click "stop" before this I could see continuous
traffic while sound was
> loading in background.
Yeah, I remember someone posted that solution a long time
ago. It seems if you load a file with the same name the cache
doesn't
know any better and adjusts the download size to the smaller
one. Maybe it's a good way to do it! Could it be a way to remove an
mp3 from someone's cache after it plays? hmmmm Will have to
do more testing.
tralfaz

How to migrate stored procs accessing columns "LEFT" and "RIGHT"

Similar Messages

Maybe you are looking for