How to adjust website to work with multiple screen resolutions?

http://www.allenkey.com.au/
hello i have recently designed this website and the formatting isnt correct when veiwed with different screen resolutions
Pleese help!

hello i have recently designed this website and the formatting isnt correct when veiwed with different screen resolutions
Just so you'll know, and to keep the thread clear, resolution has nothing to do with how your page renders or is formatted.  A given page will look exactly the same on any resolution screen provided you keep the browser width the same pixel value.  It's the variation in that width from one resolution screen to another that causes the difference.  And yes, it's the fact that you have used absolute positioning as a primary layout method that is the problem for the reason that JTANNA has already mentioned.
Now - how do you want your page to behave?  Do you want it to be fixed width and centered (that would be the easiest).  In that case, change this -
<body>
to this -
<body>
  <div style="width:928px;margin:0 auto;position:relative">
and this -
</body>
to this -
</div>
</body>
Now, reposition all of your AP containers so that the page is again aligned the way you want, and you're done.

Similar Messages

  • Working with multiple video resolutions ...

    I am putting together a home movie, in case that matters, where my video was taken on a variety of cameras.  I have 1920x1080 30fps (Sony camcorder), 1280x720 60fps (Flip), 1280x720 30fps (iPhone 4), 720x480fps (miniDV).    Targets are PS3/big TV, PC, and BD or DVD disc.   The 1080p Sony footage is my most abundant and important footage.    Questions less any open-ended comments, I'm all ears.
    1) What would you all set for sequence settings?    In my layman's mind I favored the 1080p footage creating a sequence using one of the Sony clips.
    2) Any issues exporting to H.264 1080p 30fps?  That format plays natively on my Sony PS3, PC, and easy to create a BD without further encoding.   Any special settings I should set when I export?   Or should I be going with a different format in this case?  I get confused on the whole when to upscale vs. downscale topic.
    3) Assuming yes and yes, would you want to scale the lower resolution clips to frame size?   Or would you leave them with big black bars on all sides?   Or would it depend on which resolution listed above?
    4) Assuming you said scale to frame size for all, unfortunately I was not aware of the Edit.Preferences.General.Default Scale to Frame Size setting until I after I imported.  I have spent days and hours pouring over hundreds of video clips, so going back and re-importing and editing would be a nightmare (unless there is someway to cause PP to resync with original clips achieving the same result).    So is the best option then to select the clips on the timeline and check "Scale to Frame Size"?   It looks like I can do that by selecting multiple clips on the timeline and get them all at once.    If the option is set for the 1080p clips (that match the sequence) will it just be ignored?  My footage is mixed throughout the time line.
    Thanks!
    Jon

    I really appreciate the rich feedback here - this forums is great, especially for us lost in space isolated consumers.   Following up on several questions and comments ...
    All of my TV's and computer monitors are 1080.  I'm hand waving a bit here, but I'm guessing my footage is 65% 1080i, 25% 720p, and 10% SD; something along those lines.   I am following a chronological story format, but could separate out the early part of the year before I started shooting in 1080i.  But note even there I would still have the mix of 720p and SD.  I can create my own delivery requirements being a home movie, but the plan was to have a .m2t encoding to play on PC's and then BD for the PS3 on a big TV.   So my original layman's thought was to go with a 1080i sequence, put it all in there, and take my lumps with how it comes out.  I guess I would rather favor the bulk of the HD footage looking good. 
    I did some experimenting tonight.    I took a 1080i sequence created from my dominant footage.  I dropped in a sample 720p and SD clip x 2; on the duplicates I selected Scale to Frame Size.   I watched the result over and over with my daughter on a 55" LED TV playing natively off a flash drive on a PS3 with an H.264 BD encoding .m2t file, VBR 2-pass.   What we discovered in our opinion was that the 720p was a bit too grainy for our tastes when scaled to the frame size.  Despite the pillar bars, we felt the unscaled (right term?) 720p was plenty "big" enough on the screen.   The 720p came off a Flip pocket camera, so nothing stellar to begin with.   On the SD clip, the unscaled version was clearly better looking with smoother motion than the scaled to frame size version.  However, we found it a bit too small with the pillar boxes and ultimately decided we preferred the scaled up size despite the degradation. 
    Now here is a really interesting note.  Perhaps I did something wrong here?   I took that same SD clip, created a new sequence from it, ensuring it was interlaced, and exported to MPEG2-DVD, VBR 2-pass, etc., imported into Encore, produced a DVD without any transcoding.  We then played this DVD back and forth with the aformentioned scale to frame size H.264 encoding.   I'm not sure I could tell a difference, but my daughter thought the 1080i playing natively off the PS3 look a little bit better than the DVD.    Not what I was expecting.   So unless I am missing something, in this specific case it seems the 1080i sequence is the way to go since we are not observing any benefit with straight SD and it fits better with my home movie situation.
    Separate topic, but I have a decade of SD home movies stored in various mpeg and avi files.   Upscaling those is intriguing.   Does a BMD card allow you to hardware upscale an SD file on your PC or only on capture from a device?
    I'm also interested in trying Instant HD.  Here is the rub though - it only works on progressive footage.  Perhaps I should put this question in a separate thread, but what is the best way to convert interlaced to progressive?  Or is that just flat out going to mangle the end results.  Red Giant also makes a plug-in called Magic Bullet Frames that supposedly converts to progressive.    To be clear - not so worried about the bit of SD discussed here on the upscale front, but rather going back to the decade prior.

  • Working with multiple screens

    I am new to Dreamweaver and the first thing I noticed was
    that it does not appear to allow me to 'undock' panel groups and
    move them to my second monitor. This is one of my favorite features
    of Photoshop, but I can't figure out how to do it in Dreamweaver.
    Am I missing something or did Macromedia not include this feature?
    If it doesn't exist, does anyone know of any plans to add it
    to future versions. I am using MX2004.

    "dvanamburg" <[email protected]> wrote in
    message
    news:e4vi47$rcp$[email protected]..
    >I am new to Dreamweaver and the first thing I noticed was
    that it does not
    > appear to allow me to 'undock' panel groups and move
    them to my second
    > monitor.
    > This is one of my favorite features of Photoshop, but I
    can't figure out
    > how to
    > do it in Dreamweaver. Am I missing something or did
    Macromedia not include
    > this
    > feature?
    >
    > If it doesn't exist, does anyone know of any plans to
    add it to future
    > versions. I am using MX2004.
    >
    In Dreamweaver 8 you can go to dual screen layout
    Window menu > Workspace Layout > Dual Screen
    You can also separate the panel groups into pallets just like
    in Photoshop
    in the
    Panel menu > Group With.. > New Panel Group.
    I don't know if this was available in MX 2004 as I am pretty
    new to this
    program. Also, I am referring to the Windows version.
    ss.

  • How to get reasonable font size with higher screen resolution

    I'm using my new Mac Mini as living room PC with 42" plasma screen and tv itself seems to support quite well the 'better' resolutions like 1024x768. Unfortunately then text is too small to read from sofa (which is about 3 meters away from tv). I have switched back to 800x600 resolution where font sizes are almost ok but many programs complaint about the resolution (e.g. Google Earth) and need to change the resolution back and worth to get some OK button pressed which is glumsy.
    I have also found pretty good Tinkertool to finetune font sizes but it does not affect all font sizes like I want. So question is there any better solution how I could find theme that suites better for living room purpose (have not find any theme possibilities for MacOSX). In Linux I could finetune X fontserver, in WIndows I could fine tune the theme used to have bigger fonts, how do I do it in this cool mac?

    I hear you! I would also like to see an answer for this. I am running Leopard on a Mac Mini on my 50 inch display in the living room. I have set the resolution to 1080p so that the video and photos are as sharp as possible. (man the videos look great)...
    But, I have a very hard time reading the menu bar, as well as safari and mail from this machine. I realize that there are ways to increase the font sizes, but:
    1) when I restart safari, I have to change the settings each time
    2) when I restart mail, I have have to change the setting each time
    3) I cannot figure out a way to make the menu bar larger
    I really don't want to bring the mac mini down to a resolution like 800X600 - I think it would look horrible on the large screen.
    What is a big screen lover to do?
    Any help would be most appreciated...
    Cheers!

  • How do icloud and itunes match work with multiple libraries?

    How do icloud and itunes match work with multiple libraries?

    This forum is for troubleshooting compatibility issues between Macs and Windows, not iTunes. You'll probably want to repost your question in the iTunes discussions:
    http://discussions.apple.com/category.jspa?categoryID=150

  • HP Officejet 6500A How do I scan a document with multiple pages into one file?

    HP Officejet 6500A Plus e-All-in-One Printer - E710n
    Windows 7 (64 bit)
    How do I scan a document with multiple pages into one file?  My old printer (psc 2110) asked after each scan if I wanted to scan another page.  At the end I had one pdf file with multiple pages.
    This new one creates one file for each page and I cannot find a way to create one pdf file with multiple pages.
    This question was solved.
    View Solution.

    Hi mpw101,
    If you load the papers into the ADF - Automatic Document Feeder, and then select Document to PDF then they will all be scanning into one file. Let me know if this works for you?
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • Working with Multiple Files in Workspace Layout

    If I was working with multiple files in the workspace layout, they each used to be available for selection from a tab.  Now I can either cascade the files horizontally or vertically - but not have them appear in a tab across the top of the workspace layout.
    Does anyone know how to set the workspace to present multiple files in tabs?  I have CS3.

    Tanya,
    This may not help, but the times when that happens to me is when I go too fast and some operations haven't finished. I then try to select a file that hasn't completed and the file I select is in the process of having the data updated. The worst is when it is trying to render as I am doing something.
    I hope this helps some.
    Mel

  • Reg:working with multiple windows in webdynpro-abap

    Hi ,
    How can we create multiple windows and how can we link them...
    suppose we have 3 fields on first screen .how to move the data from the first screen to second screen..
    Thanks & Regards
    Suman Puthadi

    Hi
    As per your Subject you are looking for "working with multiple windows in webdynpro-abap" and for abap there is a different forum. Web Dynpro ABAP
    Hope its clear to you...
    Even you can read this post when ever you get time Read before posting
    Regards
    Ayyapparaj

  • Problem when working with multiple sequences

    Dears,
    In order to make life easier (I am currently working on a rather long project), I work with multiple sequences, one per chapter.
    My problem: I named one sequence "assembly sequences" in order to add the various sequences. I dropped the sequence no 1, then no 2. All works fine, beside that when playing the sequence no 2, I see two black lines on top and bottom of the screen for the all length of the sequence. Which is not the case when I click on the sequence itself and play it independently.
    Any idea how to solve this ?
    Thanks
    Nic

    Thanks, what happened is that :
    1st sequence is like this : Frame size 720x576 pixels, video rate 25fps, Compressor DV-Pal. And I think it is the one appropriate for me and my country.
    2nd sequence is like this : Frame size 720x480 pixels,
    video rate 29.97 fps, Compressor DV-DVPRO-NTSC.
    I think I should change the second sequence setting, but can I do it after all the work I have done, and continue making a 3rd, 4th and so on ?
    Tx for your precious help,
    Nicolas

  • Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own? If each has their own does each id have to buy their own music and apps? How does find my iphone work with one apple id or two? also I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?

    Is it possible to have your whole family on one apple id or is it better to have each person have there own?
    Yes, it is possible. 1 apple ID can be associated with up to 10 devices.
    If each has their own does each id have to buy their own music and apps?
    Yes, all purchases are non-transferable.
    How does find my iphone work with one apple id or two?
    Every device associated with one apple ID through Find my iPhone is tied to that Apple ID; Find my iPhone will work in the same way with up to ten devices associated with one apple ID. You cannot enable Find my iPhone for one device across two apple IDs
    I am going to be going off to college soon should I make an itunes id for my self and how will I get all the music from the old id?
    If you have authorized a computer with the old apple ID, you can transfer old media purchased through the old to other devices via iTunes. This doesn't mean the media purchases through the old apple ID it transferred to the new account. If you plan to make future purchases and don't wish to share them with others, make your own apple ID.

  • How do i take one layer with multiple selections...

    how do i take one layer with multiple selections and make those selections their own layer?

    Yes sir. It w was really hard to explain. It is discontiguous segments that are separated by transparent areas. And I want those non transparent areas to be on their own layer. I have a photo shop file that has a bunch of buttons on them and they are on a transparent background. It is one layer. I want to select all the buttons and put them on their own layers. I can do this manually by selecting a button and cmd Just to a new layer, but when I have 200 buttons it is a daunting task.
    Sent by MailWise<http://www.mail-wise.com/installation/4> – Your emails, with style.

  • How can i create  excel sheet with multiple tabs using utl file?

    how can i create excel sheet with multiple tabs using utl file?
    any one help me?

    Jaggy,
    I gave you the most suitable answer on your own thread yesterday
    Re: How to Generating Excel workbook with multiple worksheets

  • How do you get a line with MULTIPLE fields to WRAP ?

    How do you get a line with MULTIPLE fields to WRAP ?
    Good afternoon everyone...
    THE PROBLEM: Why doesn’t a line with multiple fields WRAP?
    HYPOTHETICAL EXAMPLE/WHAT I”D LIKE TO SEE
    If I have 2 fields on a line (this is now a hypothetical example and nothing to do with my actual report)….let’s call them field A and field B. And if field A has values of all ‘X’ and field B has values of all ‘Y’…then….the normal case would be (ignore dots – only for spacing):
    A……………………… B
    XXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYY
    But what if A is too long? I would want to see B wrap onto the next line like this:
    A……………………………………………………B
    XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX YYYYYY
    YYYYYYYYYYYYY
    And similarly….if B is extra long, can the line print as:
    A………………………. B
    XXXXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYYYYYYY
    YYYYYYYYYYYYYYYYYYYYYYYYYYYYYY
    I don’t want the case where B is long and I get:
    A………………… …B…
    XXXXXXXXXXXXXXXXX YYYYYYYYYYYYYYYYYYYYYY
    ………………………..YYYYYYYYYYYYYYYYYYYYY
    I can see how you can wrap an individual field like that…but how can you WRAP a line of[b] fields within the frame so it wraps to the BEGINNING of the frame on next line?
    My SPECIFIC CASE
    I have a report that I have stripped down to a simple structure for the purposes of this explanation.
    My DATA MODEL has the main QUERY (for plant family and species data). The columns of the query are divided into 2 groups. The 1st GROUP contains the family data. Below that is the rest of the species data in a 2nd GROUP.
    Linking from the 2nd species group (above) is a new QUERY to extract REGION data based on the common key field. Under this 2nd query is another group with all the REGION columns.
    The LAYOUT MODEL has a group frame (the main , base one)
    On top of this is a repeating frame based on the 1st group (family data).
    On top of this is another repeating frame for the 2nd group (species data).
    On top of this is 2 Frames on the same line line. The 1st frame contains columns from the species group .
    The 2nd frame on this line is a repeating frame. The PRINT DIRECTION for this frame is ACROSS/DOWN. It repeats details of the REGION where the species is found. These columns come from this group come from the REGION QUERY and GROUP.
    All fields on the report line have variable horizontal elasticity.
    The problem is that when there is too much data on the line, it does NOT WRAP to the 2nd line.. It TRUNCATES.
    Can the line be made to WRAP????..
    In my current report, 1 of 2 things is happening:
    1) All fields print on the line until it hits the page boundary and then it just stops. Truncated!
    2) All fields print on the current line, then Oracle Reports throws a new page to print the REMAINDER of the long, input line
    But I would like a LONG line to continue printing onto the following line of the same page.
    I have tried all combinations of the elasticity fields and the ‘ADVANCED LAYOUT’ properties.
    I have been focussing my attention with this problem on the frames .
    We are using REPORT BUILDER V 6.0.8.26.0
    Thankyou to anyone who may offer assistance.
    Tony Calabrese.

    Steve,
    you gain 1 thing, but you lose something else!
    This thing is SO frustrating!
    Hey Steve! Good afternoon.
    I've done as you suggested....I have a long text boilerplate item - the only 1 on the line...and it has all the column in it.
    So it looks like:
    &col1 &col2 &col3 &col4 &col5 etc etc etc
    And the line expands nicely to each field's requirements.
    And when it gets to the right page boundary...it WRAPS to the next line! Beautiful!!!
    The only thing is that...when I had individual fields across the line I was able to create format triggers for those fields. And in doing so I was able to reduce the font and change the justification. I had to do that because some of the fields had to appear superscripted.
    So I wanted something like (ignore the dots):
    ...................................ppppp
    AAAA BBBB CCCCC DDDD EEEE FFFFFF
    So the field of 'ppppp' appeared slightly higher on the line than the other fields...
    I can't see how I can do this with a single TEXT field containing all the &COL values.
    Have you ever come across anything like this?
    Thankyou again,
    Tony Calabrese 12/4/2007

  • Has anyone figured out how to get speech recognition working with sticky keys enabled on mountain lion?

    I'm trying to use speech recognition to input text on my iMac running the latest mountain lion, 10.8.3.
    I have sticky keys enabled.
    When I try to start speaking by pressing the function key twice nothing happens. I can only get it to work if I disable sticky keys.
    The same problem occurs with all the other modifier keys as shortcut, they do not work with sticky keys.
    When I try to select a different shortcut, I am unable to select a two key combination, but am limited to one.
    If I select the F6 key, or any other single key, I am able to start speech recognition. However the second time that I press the key, it does not stop recognition and process my words. Instead, it restarts the recognition.
    Has anyone figured out how to get speech recognition working with sticky keys enabled?
    Or a way to get an individual key shortcut to start on the first press and process it on the second?
    Or a way to get key combinations to work, as specified by the help:
    Dictation On and Off
    To use Dictation, click On.
    When you’re ready to dictate text, place the insertion point where you want the dictated text to appear and press the Fn (function) key twice. When you see the lighted microphone icon and hear a beep, the microphone is ready for you to speak your text.
    Shortcut
    By default, you press the Fn (Function) key twice to start dictation. If you like, you can choose a different shortcut from the menu.
    To create a shortcut that’s not in the list, choose Customize, and then press the keys you want to use. You can press two or more keys to create your shortcut.

    I noticed with version 10.8.4 of OS X that I am now able to select F6 to activate, and the return key to complete the speech recognition. This is still different than the description of how these should function that's included in the help, but at least it's an improvement.

  • How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

    How can I get an album with multiple artists to display in my Nano as one album insteadof multiple albums?

    See this page for helpful information.
    http://samsoft.org.uk/iTunes/grouping.asp
    B-rock

Maybe you are looking for