How to allocate the workflow to the action defnitions in solution manager

Hi,
we are having solution manager with the CHARM configured, and currently we are looking for the trigger of mail and workitem for change of action. the work flow is designed for that, but how to assign the workflow to the condition and processing type .
please suggest, points are definetly awarded.
Thanks and regards
keerthi

Hi,
Well, why dont you check the event that gets triggered during the Status change of the user?
This can be done by switching on the EVENT TRACE using SWELS txn and simulate the BUSINESS PROCESS and then check the event trace using SWEL.
After getting the required Business Object and event, Please attach your WF to that EVENT in the BASIC DATA-START EVENTS.
Regards,
<i><b>Raja Sekhar</b></i>

Similar Messages

How to use the workflow in the pm notification?

Hi, guys
who can tell me how to use the workflow in the PM notification?
ths!

hi
you can refer the following links
[Preparation and Customizing|http://help.sap.com/saphelp_47x200/helpdata/en/7b/b7410e53b211d38abd0000e8284931/content.htm]
[Operation and Link to Application Functions|http://help.sap.com/saphelp_47x200/helpdata/en/2e/f1ab4456ca11d38ac30000e8284931/content.htm]
regards
thyagarajan

Errors were found when compiling the workflow. The workflow files were saved but cannot be run.

Greetings All,
I am having issues with a SharePoint Designer workflow. This is a SharePoint 2013 environment, I'm using SharePoint Designer 2013 and working on a SharePoint 2010 workflow. I'm developing this as a SharePoint 2010 workflow because I need to do
impersonation.
The environment and workflow have been running, in the past week, without issue. I went to add a couple steps and now I cannot publish the workflow. While in SharePoint Designer, I receive the error:
"Errors were found when compiling the workflow. The workflow files were saved but cannot be run." When I click the Advanced button on the error dialog, the message is "Unexpected error on server associating the workflow."
That is all the error information I have available; nothing is in the log files.
I have investigated this error and tried the following:
Cleared the SharePoint Designer cache.
The WebApp.UserDefinedWorkflowMaximumComplexity was at 7000 so I increased it to 10000. Restarted the servers (which may not have been necessary) and tried again receiving the same error. I then increased it to 30000 with the same error result.
Since this is a large workflow, I tried created a workflow with a single action, write to workflow log, with the same error results.
I reboot the servers and try again and now I can publish the small test workflow but not the original. However, neither will run. When I attempt to manually run the small test workflow on an item, I get an error: "Sorry something went wrong.
An unexpected error occurs. I checked the log files for the correlation id and nothing, nothing was logged for the error. ~arg~
Also, now no workflows can be published in this web app. Not just the one I was working on but none of them!
Does anyone have a clue what has happened to the SharePoint 2010 workflow service? Or some suggestions for me to try?
Thank you in advance for your help!
Bob Mixon

try these links:
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
http://code2care.org/pages/sharepoint-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run/
http://sharepoint.stackexchange.com/questions/119909/sharepoint-designer-error-errors-were-found-when-compiling-the-workflow
http://stackoverflow.com/questions/26413125/errors-were-found-when-compiling-the-workflow-in-sharepoint-2013
Hi Sagar,
I appreciate it but if you see my original post, this is a SharePoint 2010 workflow that cannot be published; which has now caused all SharePoint 2010 workflows in the same web app to error.
Your first link is specific to SharePoint 2013 workflows.
Your second link refers to the UserDefinedWorkflowMaximumComplexity. If you read my original post, I've already tried this and I've tried to publish a small (single activity) workflow.
Your third link also refers to large workflows with many approval activities. My workflow doesn't contain any approval activities.
And you fourth link refers to 2013 workflows not 2010.
My issue is with publishing and running a SharePoint 2010 workflow in SharePoint 2013.
Thank you...

Using in the workflow process the element of Scenario dimension which conta

Good day All
In the Scenario dimension has been created element which include as children the some store elements of the Scenario dimension (Plan, Fact ...).
This element has been assigned as scenario element for Planning Unit Hierarchy.
When we start the workflow process the children of its elements (Plan, Fact ...) still available for edit on work form for all users.
Question. Work form contains several elements of Scenario. As in the workflow process close all of these elements, creating only one Planning Unit Hierarchy and run the process only once (in fact, one Scenario).
thanks

The total video bit rate is determined by audio & video. Depending on what rate your video file was encoded at will determine how much room is left for audio. PCM(aiff/wav) audio requires a bigger piece of the pie. Video bit rate too high means your overall(video+audio) rate is going above 9Mbps which the format won't allow. The only way to use aiff would be to lower your video file's data rate. The length of your program is also a factor in all of this.
I had some problems in the past with using aiff instead ac3. Although there shouldn't be any issue I experienced playback issues on some players that couldn't be explained but were cleared up by ac3. I have been using the same specs as Dave's suggestion for almost nine years and have not had any issues with mix, quality, or levels.

Cannot see the workflow in the BB simulator sent from the SUP workspace

Hi All,
I am now trying to send a workflow to my blackberry simulator from the SUP mobile workspace by clicking "Send a notification" but I do not see thw workflow in the Simulator's Message->Workflow.
I generated the workflow in the workspace where I selected the right device while generating...
I am able to see the simulator online in SCC and also I see that the workflow is assigned to the device in SCC.
But when I try to send the workflow from the Unwired workspace by right clicking on the window of the workflow and clicking "Send a notification" I dont see the workflow in the simulator inside messages->workflow.
Regards
Tapas
Edited by: tapasdixit on Nov 12, 2011 6:35 PM
Edited by: tapasdixit on Nov 12, 2011 6:37 PM

Hi Andrew,
Thanks again a lot for the help. It has really helped. Now I am trying to get a better understanding of how the platform, SCC and the simulator need to be configured.
Let me write down some of my learnings:
If one does not see the workflow then the following points should be checked.
1. Check whether the simulator and the MDS are running properly or not. Like in my case I had installed MDS and 9800 simulator by getting 2 seperate installables. But later I got the BB 6.0 JDE and installed that. Probably this helped me out.
2. If you dont see one of your already developed workflows not in the Simulator then develop a new workflow and try syncing that to the simulator. As you have shown it to Tapan one can get it from http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8028374d-6490-2e10-5391-b3cb0310ad1d?QuickLink=index&overridelayout=true and https://cw.sdn.sap.com/cw/groups/sup-apps?view=documents
For me I was not able to move my already developed workflow to the simulator. Then I tried to get the EmpDir2_0_ESD1 from the above mentioned link and then this worked. Probably some error in my workflow. So try generating a new workflow and move that to the simulator
3. If MDS does not comeup then it may be because you have installed it in C:Program Files. So better install the BB JDE in some other folder where you have write permission. This information I got from StackFlow.
Hope this may help some novice like me...
Thanks again Andrew...
Best Regards
Tapas

How to get the ASAP 7.0 Implementation roadmap in Solution manager system?

Hi,
We are on SOLMAN 7.0 SP19 and we wanted to use the ASAP 7.0 roadmap for an implementation project. But currently we dont see this roadmap in the list of Roadmaps available. Can some one tell how it can be brought in and made available in Solution manager system. Is it done through a SAP note? If not where do we can get this roadmap? I know the HTML version is available in service matketplace but we want the roadmap to be assigned in Solution manager project.
Regards,
Kathir

Hi Lori,
Thanks for your reply. Do you have information on what support pack level of ST-ICO will have the Roadmap ASAP 7.0?
The currentl level of my system is ST-ICO 150_700 0018.
Regards,
Kathir

How to add SAP PI 7.1 JAVA stack in solution manager

Hi,
I just added PI system in solution manager.For ABAP stack it is working fine.
Could you please help me that, how can I add java stack of PI system in solution manager?
If it is through NWA in PI what will be the steps?
Regards
Amit

Hi,
could you please more specific as I am new to this one?
In my PI system SLD Data supplier is already configured for other system.
How can I do this using NWA for solution manager.
regards
Amit

How to trigger the workflow from the excel sheet

hello friends,
my problem is that i should trigger the workflow from a excel sheet which contains a list of appraisers and appraisees.how to do this. can anyone help on this.
thanks.

Hi Murthy,
If you are asking if a workflow can be started on R/3 while in Excel - may be possible if you can develop some fancy macros that can make RFC calls to an ABAP function module. I won't even attempt to travel that route.
Save the excel sheet as CSV or Tab delimited file and process it using ABAP. You can use the WAPI function module SAP_WAPI_CREATE_EVENT (Rel 4.7)to start the Workflow by raising the relevant event. In earlier releases, see FM SWE_EVENT_CREATE.
Please do keep in mind there could be performance and response time issues for dialog users of the system if you are going to start several workflows using a report program.
Cheers,
Ramki.

How can I control the workflow in the award the Rfx response

HI,Experts :
I work in SRM 7.0 ,RFx scenario .
In my case ,the supplier submit his RFX response according the RFX ,and the purchaser awards this response .
There are 3 steps workflow for one type RFX response,and 4 steps workflow for another RFX Response .So ,I know I just can use the standard transaction type for the RFX Response .SO ,How can I control the workflow in this case .
Bestregards
Alex

Hi,
If i understand your question correcly, you have to determine the process schema definition dynamically based on the transaction type.. then you can configure the process level ( 3 or 4 ) based the process schema definition..
Saravanan

How to allocate more RAM to the JVM

I use servlets which show applets in a web page, and it needs many space memory to show big pictures. I wondered if there was no means to allocate more RAM to the JVM
Would anybody know a means?
Thank you in advance

I know, and it is there that I want to use it, but I do not know which are the arguments to be put nor how much I can add of memory.
Is there a tutorial to use this option?
Is there a means to know the space report at present used by the JVM?

How to allocate order by checking the price scales during MRP run

Hi,
Here is a scenario.
A material XXXX is being supplied by Vendor A and Vendor B.
Vendor A has got price scale as below
For Order qty 0-10 pc -- Rs. 10 per pc
For Order qty 11-20pc -- Rs. 10 per pc
Vendor B has got price scale as below
For Order qty 0-10 pc -- Rs. 12 per pc
For Order qty 11-20pc -- Rs. 8 per pc
With these price options,...
--If requirement qty is 8 pc, then Vendor A should be assigned as Source of Supply in PR
--If requirement qty is 12 pc, then Vendor B should be assigned as Source of Supply in PR
How can this be met?
Regards,
Prathap

Hello guys!
As told, here I come with news about my problem.
Finally, the Strategy Group didn't solve our problem.
We didn't solve our problem as planned but we have found another way to work.
Instead of including the unrestricted stock in the MRP project, we use transaction CO46 to have an overview of the unrestricted stock of all the components of the project's BOM.
Based on that overview, the user can make stock transfers of the available quantities from the unrestricted stock to the project stock.
I hope it can help people having the same problem!
Bogdan

Triggering the workflow after the Notification is created

Hi Everyone,
If the two workflow templates have the same triggering event BO: BUS7051, Event: CREATED). Both the workflows are triggered after the notification is created.
Scenario:
After terminating an employee notification number is created and triggers the workflow template 99900033 (Event: CREATED)
After Promoting an employee notification number is created and triggers the workflow template 99900035 (Event: CREATED)
My Requirement is: I want to trigger only one workflow template depending on my scenario (Termination or Promotion).
How can I achieve this? Could you please let me know?

please include a simple condition in SWB_COND where employment EQ Termination for termination event linkage (SWE2) and similary for promotion also create ne more condition and include in promotion event linkage.
You might be having some doc type, so based on this you can achieve this.

Where do we need to chage in the workflow for the follwoing problem

development will need to adjust the existing code to pull email address from 105 currently the email address is derived from [email protected] Greg will provide update on this item

There may be a mail-sending step that simply specified that the initiator is the receiver of the e-mail. You have several possibilities for changing this.
If you have an employee object in the workflow container you can enhance the BOR object type (i.e. create a subtype and delegate to this subtype) with a virtual attribute in which you hold the e-mail address, which you find using the aforementioned function module.
Alternatively you can create a method for the main object type of your workflow and make it return the e-mail address.
In any case you then bind your virtual attribute/returned e-mail address to the recipient field (task container element) of the mail-sending step. Some

Trigger the workflow in the remote sap server

I am trying to trigger another workflow in remote sap server by using web activity. What are the prerequisite for using web activity. Actually, i tried to use url wizard but, i don't know what i should i fill for the port. is the server configuration required? anyone has exprience on this?

Hey if you want to know the URL and the prot number generated by the system you can use a program RCF_GENERATE_URL if you execute this program thenit will show you the enitr URL including the port number . My Guess is it will be 8000( Iam not sure)
Secondly teh prerequisites for using a Web activity step is you have to define the WEB SERVER , This is because you need to enable the webservice , in order to recevie the XML doument, through which you can start WF which is located in the REMOTE SAP server,
And At the same time you have to make the appropriate settings in the remote workflow so that it will receive the XML document and then start's its processing.
for further information [Check this|http://help.sap.com/saphelp_nw04/helpdata/en/cc/9f9138d380f50fe10000009b38f8cf/content.htm]

What are the standard datasource that are available in Solution manager?

Hi All,
Can you please tel me which datasource will contain data about SLA and incident management. The users are raising issues in SOLAR_*** Tcode and I dont know where it is getting updated.
Please reply me asap.
Thanks in advance!
Regards,
Ramanathan.R

Hello,
According to SAP Library Document for Solution Manager, Change Request Management offers you the following benefits:
·        Increased maintenance and project efficiency
·        Minimized costs for project management and IT
·        Reduced risk of correction and project failure
·        Shorter correction, implementation, and going-live phase
·        Efficient maintenance of customer developments and implementations
Personally, I find the greatest benefit to be centralized management of change requests for connected SAP Systems from start to finish - you can create transports, move transports, test transports, and confirm test results all centrally. This versus management of each individual system landscape separately.
This is my 2 cents.
Regards,
Robert

How to allocate the workflow to the action defnitions in solution manager

Similar Messages

Maybe you are looking for