How to analyzer the BI query in VISUAL COMPOSER?

hi experts,
could you please explain me how to analyze the Bex query in VISUAL COMPOSER? could you please provide me the step-by-step documentation if possible??
regards
vadlamudi

Hi Vadlamudi,
Here is some documentation for using BI Queries in VC:
[Modeling Composite Views Using BI Data Services|http://help.sap.com/saphelp_nwce10/helpdata/en/46/081ed5f8685875e10000000a11466f/frameset.htm]
[Maintaining BI System Connections|http://help.sap.com/saphelp_nwce10/helpdata/en/7e/6dbcea3700452195e3bddaa47c5906/frameset.htm]
I hope it helps,
Regards,
Udi

Similar Messages

How to view the sql query?

hi,
how to view the sql query formed from the xml structure in the receiver jdbc?

You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
              Parameter type: boolean
              Parameter value: true for any string value, false only for empty string
              Parameter value default: false (empty String)
              Available with: SP9
              Category: 2
              Description:
              When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
              This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek

How to transport the BW query's variable to BO webi report

Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhu

I have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM

How to extract the Physical Query(database Query)

Hi ,
How to extract the Physical Query(database Query) from obiee which was fired in obiee
Regards
Ranga

Hi Ranganath,
Have a look the following links.
Setting Logging level:
http://gerardnico.com/wiki/dat/obiee/loglevel
How to see physical query:
http://gerardnico.com/wiki/dat/obiee/manage_session_log
If you are new to OBIEE, spend some hours on the following blog to learn from basics to advanced level.
http://gerardnico.com/wiki/
http://obiee101.blogspot.com/
http://www.rittmanmead.com/blog/
Hope it helps you.
Regards,
Kalyan Chukkapalli
http://123obi.com

How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

Dear
Experts, I have a very exciting demand, the board of a customer.
I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
I ask, what is the standard solution that is used in these cases?
Thank you
Miki

How to write the given query using 'ANY ' operator

Hi,
How to write the given query using 'ANY ' operator , I dont need to fetch to grade_master table twice in database, just need to fetch within the result set.
SELECT dsg_code,dsg_name,dsg_grade FROM designation_master WHERE dsg_orgn='&&Orgn' and dsg_ctry='&&ctry'
And dsg_loc ='&&loc' And dsg_oru = '&&oru' and dsg_grade in decode('&&radio_group',
1, SELECT grd_code FROM grade_master WHERE grd_osm_code in (Select grd_osm_code FROM grade_master WHERE grd_orgn='&&Orgn' and grd_ctry='&&ctry' And grd_loc ='&&loc' And grd_oru = '&&oru' and grd_code ='&&emp_grade'),
2, SELECT grd_code FROM grade_master WHERE grd_osm_code > (Select grd_osm_code FROM grade_master WHERE grd_orgn='&&orgn' and grd_ctry='&&ctry' and grd_loc ='&&loc' And grd_oru = '&&oru' and grd_code),
3, SELECT grd_code FROM grade_master WHERE grd_osm_code < (Select grd_osm_code FROM grade_master WHERE grd_orgn='&&orgn' and grd_ctry='&&ctry' And grd_loc ='&&loc' And grd_oru = '&&oru' and grd_code ='&&emp_grade'))
thanks
rincy

Hi,
One thing I understood my your issue is you want to perform, execution of query once or fetch the results sets my minimizing the number of times executions of queries. It would be hard for us to check in this way, atleast provide some temporary data and some business rules. Only I can IN, >, < (queries logical conditons on inner query)
- Pavan Kumar N
- ORACLE OCP - 9i/10g
https://www.oracleinternals.blogspot.com

How to insert the select query result into table?

How to insert the select query result into table?
SELECT top 20 creation_time
,last_execution_time
,total_physical_reads
,total_logical_reads
,total_logical_writes
, execution_count
, total_worker_time
, total_elapsed_time
, total_elapsed_time / execution_count avg_elapsed_time
,SUBSTRING(st.text, (qs.statement_start_offset/2) + 1,
((CASE statement_end_offset
WHEN -1 THEN DATALENGTH(st.text)
ELSE qs.statement_end_offset END
- qs.statement_start_offset)/2) + 1) AS statement_text
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) st
ORDER BY total_elapsed_time / execution_count DESC;
Thanks,
Tirumala

1. SELECT INTO
Below method will create table when data is inserted from one table to another table. Its useful when you need exactly same datatype as source table.
Use AdventureWorks2008R2;
Go
---Insert data using SELECT INTO
SELECT AddressLine1, City
INTO BothellAddresses
FROM Person.Address
where City = 'Bothell';
GO
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
2. INSERT INTO SELECT
Below method will need table to be created prior to inserting data. Its really useful when table is already created and you want insert data from
another table.
Use AdventureWorks2008R2;
Go
---Create Table
CREATE TABLE BothellAddresses (AddressLine1 NVARCHAR(60), City NVARCHAR(30))
---Insert into above table using SELECT
INSERT INTO BothellAddresses(AddressLine1, City)
SELECT AddressLine1, City
FROM Person.Address
where City = 'Bothell';
---VERIFY DATA
Select AddressLine1, City
FROM BothellAddresses
---DROP TABLE
DROP TABLE BothellAddresses
GO
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com

SQL Query in Visual Composer 7.1.1 SP2

Hi all,
I want to use an SQL Query in Visual Composer 7.1.1 but I only can search for Stored Procedures. There is documentation available but not for VC 7.1.1. I also can not use the Query Wizard for this as the System does not show up in the list.
So how is it possible to use SQL Queries in Visual Composer 7.1.1.
Thank You
Nicolas

Hi Nicolas,
If you want to use SQL statements, you should use the BI JDBC capabilities of Visual Composer. For information on how to configure such system go to [http://help.sap.com/saphelp_nwce711/helpdata/EN/3f/0f883fed254875883290c98c0c20c1/content.htm|http://help.sap.com/saphelp_nwce711/helpdata/EN/3f/0f883fed254875883290c98c0c20c1/content.htm]
Once you have it configured you should be able to search for the tables in VC. For info about this refer to [http://help.sap.com/saphelp_nwce711/helpdata/EN/7d/a109d5efcc4644a9f2da2ab27e50dd/content.htm|http://help.sap.com/saphelp_nwce711/helpdata/EN/7d/a109d5efcc4644a9f2da2ab27e50dd/content.htm]
After you drag and drop a table to the storyboard, you can right click on it and select "SQL Editor" to edit the SQL statement.
I hope this helps,
Netanel

Require query in Visual composer

Hi,
    I want to call below query in Visual composer.
      1) SAP query from R/3 server
      2) BEX query from BW server.
          I am able to see BAPI/RFC from R/3 server but not query. Do we require any additional thing with VC to call those queries?
                    I have heard about connecter, When we install VC it comes with that or we need to add connecter explicitly to call query. If yes then what I need to do. Let me know its urgent.

Hi Sachin,
I'm sorry for the delay. SDN had some problems the last minutes..
Here the link to the weblog, helping you to set up both systems:
<a href="/people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer">/people/marcel.salein/blog/2007/03/14/how-to-create-a-portal-system-for-using-it-in-visual-composer</a>
Best Regards, Benni

Create a sequence of actions in the toolbar button in Visual Composer

Hi!
I've a problem with the toolbar buttons in visual composer. On a table, I would like to have one button which launch 2 actions. For example, I want to call an event (custom action) and after that I want to select a row in another table (system action, select).
It works fine when I create 2 buttons with the toolbar buttons but my wish is to have only one button with several actions (like a sequence of actions). Is it possible?
Thanks for any help!

Hi Ronan,
I think you can achieve your requirement by creating the Wizard in SAP Visual Composer.
The following link provides the detailed steps to Create the Wizard in SAP VC.
http://help.sap.com/saphelp_nw04s/helpdata/en/88/fedb4269b2f340e10000000a1550b0/content.htm
Please have a look.
Thanks,
Prashant
(Please reward points for useful answer)

How to collect the deleted query in a transport request.

Hi Friends,
I have created a query and transported it to the Quality, the data content is all ok, except that i have not used the Project Naming conventions. Now i have a defect against my name for this. I have to copy the same query with the correct Naming convention and transport it.
My question is after copying the query with correct name i have to delete the old query (if not there would be 2 versions of the same query). How do i collect the deleted image of the query in a transport and send it to quality?.
I tried deleting a test query from Bex Designer, but this does not ask me for a transport. should i use RSZDELETE?. Not sure if it asks for a transport request when i delete the query.
Can someone pls tell me how to go about this?.
Thanks in advance.
BN

Hi BN,
I do agree that deleting directly in Quality and Prod is not good way and not recommeded.
I have not tried and deleted.But if the system is configured in such a way that if it doesnt ask for a request
then i feel you have no option.
If any object is deleted then you must have the deletion image collected into request at the same point when you are deleting.Because later when we go to transport connection we wont find the object itself.
What i think from your point as you said you have done earlier is you must have any open request regrding this query and when this query is deleted , the deletion image is also included in the same request.
So go to se03 and give your deleted query name and check all the requests.
Check in the requests when the deletion image is captured or not. we might be knowing that this is cpatured.
Regards
vamsi
Edited by: vamsi talluri on Nov 9, 2010 9:14 PM

How to get the original query string in an event receiver when dialogs are enabled

I have scenario where I am adding a document to a document library which has an external data column on it. My goal for this column is to have it automatically populated with an appropriate value based on original query string to the page. The general
idea is that I am on a custom page that has various webparts on it including a view of my document library that is context sensative based on the query string, and I want to use that context sensitivity not just to filter the list but also when adding documents.
I have been searching around for solutions to this problem all day and have gotten this far:
I have an event receiver attached to my document library that handles the ItemAdded event syncronously (as such I have the new list item available to me). In that event receiver I am able to set the column values as required. Where I am stuck is on getting
the value from the query string that I need to actually set as the column value.
Based on:
http://social.technet.microsoft.com/Forums/en-US/sharepoint2010programming/thread/8cfcb299-9a55-4139-86ec-0b53b2922a54 and several similar articles/posts I have been able to get the original source Url with the query string I want via the following
code in my event receiver:
private HttpContext context;
public EventReceiver1()
context = HttpContext.Current;
public override void ItemAdded(SPItemEventProperties properties)
var originalQueryString = context.Request.QueryString["Source"];
// Parse the query string and use the value ...
The problem is that this solution breaks down if the dialogs are turned on under the advanced settings for the list. The reason the solution fails is because the "Source" query string parameter goes away and is replaced by "IsDlg" set to a value of "1".
Does anyone know how to get past this hurdle? Any help would be greatly appreciated.

Hi Stuart,
The reason I'm looking for "Source" in the query string is because that is something I found to be reliable when the Dialogs are turned off. I've dug around pretty deep in the Request object to see if anything had the data I was looking for and unfortunately
it doesn't appear to be there. The
context.Request.QUeryString.ToString()
returns a rather simple one of:
List=%7b43ECDCB0-8440-4652-B067-AA20481779D7%7d&RootFolder=&IsDlg=1
and the
context.Request.UrlReferrer.Query.ToString()
has the same value.
I suspect this is due to the dual step process that takes place in adding an item to a document library where the first modal popup (which I suspect likely has the information I need) gives you the opportunity to browse to your file and then the second
dialog (maybe this is getting brought up as a result of another request which is now referring back to the original request that brought up the first dialog?) where you edit your properties.
Thanks for the try though, if you've got anything else I'd love to hear it.

How to know the most queried item? (please help me)

I'm doing a library's bookkeeping.
In a report I wanna know what's the book more queried or the most looked. But I dont know how to put the query in SQL.
can you please tell me?
the columns in the table are:
books varchar2(30)
author varchar2 (30)
(THERE's NOT any Book_id) or something.
please help me.

That's not a Forms question. Please direct your question to the appropriate forum.
However, using those columns, there is no way to tell the book most queried, unless you store that information yourself, or use some sort of auditing in the database.
Regards,
Robin Zimmermann
Forms Product Management

How to terminate the running query for a report?

Hi,
When I run a report, the SQL query takes too long.
This causes an overload on database.
How do I stop query from running after some time?

It is NOT possible in OBIEE 10g.
In OBIEE 11g, When a scheduled report job is in running status, you can now cancel the running job from the Report Job History page.
Check this Section 6.9, ["Canceling a Running Job." |http://docs.oracle.com/cd/E23943_01/bi.1111/e22257/view_manage_rpt_his.htm#cancel_runj]
And only possible since 11.1.1.5
regards
Jorge
p.s If this answers your question then please mark my answer as "Correct" or "Helpful"

How to convert the following query to sql server 2005

hi
i have the following query in ms access and i want to convert it into sql server 2005 express edition
SELECT iif(Max(BNo) is null,1,Max(BNo)+1) AS BNo from ( SELECT iif(Max(Product.BNo) is null,0,Max(Product.BNo)) AS BNo FROM Product union all SELECT iif(Max(grndetail.BNo) is null,0,Max(grndetail.BNo)) AS BNo FROM grndetail UNION ALL SELECT iif(Max(srdetail.BNo) is null,0,Max(srdetail.BNo)) AS BNo FROM srdetail ) as t
how to do this

The construct involving case when MAX sounds suspicious. Can you explain what the query is supposed to be doing, the structure of your table, then we can re-write it?
E.g. if you provide your table, some data and desired result, you'll get better answer than direct translation of this suspicious query.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

How to analyzer the BI query in VISUAL COMPOSER?

Similar Messages

Maybe you are looking for