How to terminate the running query for a report?
Hi,
When I run a report, the SQL query takes too long.
This causes an overload on database.
How do I stop query from running after some time?
It is NOT possible in OBIEE 10g.
In OBIEE 11g, When a scheduled report job is in running status, you can now cancel the running job from the Report Job History page.
Check this Section 6.9, ["Canceling a Running Job." |http://docs.oracle.com/cd/E23943_01/bi.1111/e22257/view_manage_rpt_his.htm#cancel_runj]
And only possible since 11.1.1.5
regards
Jorge
p.s If this answers your question then please mark my answer as "Correct" or "Helpful"
Similar Messages
-
How to manage the font size for webRfc Reports
Hi All,
How to manage(increasing or decreasing) the font size for webRFC Reports.
Regards
SriHi,
Can you try republishing and see ....
Ideally the font size would be controlled by the <font tag and if you have made changes correctly it should be reflected correctly.
Check whether the HTML code is also correct.
Thanks & Regards,
Vijith -
How to add a receipt number in the following Query for PO Report
Hi Guys,
I need a help regarding following query.
Its a PO report for 11.5.10.2
select distinct pv.segment1 supplier_number,
pv.vendor_name supplier_name,
pha.segment1 po_number,
pha.revision_num revision_num,
pha.authorization_status po_status,
to_char(pha.creation_date, 'DD/MM/YYYY') creation_date,
pha.currency_code currency_code,
pla.sum_amount_ordered sum_amount_ordered,
pda.sum_quantity_ordered sum_quantity_ordered,
pda.sum_amount_received sum_amount_received,
pda.sum_quantity_received sum_quantity_received,
(pla.sum_amount_ordered - pda.sum_amount_received) sum_accrued, --AVI
( pda.sum_quantity_ordered - pda.sum_quantity_received) quantity_accrued, --AVi
to_char(rsl.date_receipt, 'DD/MM/YYYY') date_receipt,
-- rsl.receipt_num receipt_number,
ppa.segment1 project_code, ppa.project_status_code, --10.0.0.4
aia.invoice_num invoice_num,
aia.invoice_date invoice_date, --AVI
aia.creation_date invoice_creation_date, --AVI
aia.amount invoice_amount_allocated_to_po, --AVI
pla.purchase_basis,
pla.category_id,
-- pda.item_description,
haou.name organisation, --10.0.0.3
pda.sum_quantity_billed sum_quantity_billed , --10.0.0.3
gcc1.CONCATENATED_SEGMENTS,
gcc2.CONCATENATED_SEGMENTS
from po_headers_all pha,
po_vendors pv,
pa_projects_all ppa,
hr_all_organization_units haou,
(select po_header_id,
sum(quantity * unit_price) sum_amount_ordered,
org_id,
purchase_basis,
category_id
-- pla.item_description,
from po_lines_all
group by po_header_id, org_id
, purchase_basis,
category_id
-- pla.item_description
) pla,
(select pla.po_header_id,
pda.project_id,
sum(pda.quantity_ordered) sum_quantity_ordered,
sum(pda.quantity_delivered * pla.unit_price) sum_amount_received,
sum(pda.quantity_delivered) sum_quantity_received,
sum(pda.quantity_billed) sum_quantity_billed, --10.0.0.3
accrual_account_id
from po_distributions_all pda, po_lines_all pla
where pla.po_line_id = pda.po_line_id
group by pla.po_header_id, pda.project_id,accrual_account_id
) pda,
(select po_header_id, charge_account_id,
-- rsh.receipt_num,
min(rsl.creation_date) date_receipt
from rcv_shipment_lines rsl
where rsh.SHIPMENT_HEADER_ID=rsl.SHIPMENT_HEADER_ID
group by po_header_id,charge_account_id
) rsl,
(select distinct aia.invoice_num, pda.po_header_id , aia.invoice_date --10.0.0.3
, aia.creation_date , sum(aida.amount) amount
from po_distributions_all pda,
ap_invoice_distributions_all aida,
ap_invoices_all aia
where pda.po_distribution_id = aida.po_distribution_id(+)
and aia.invoice_id(+) = aida.invoice_id
Group by
aia.invoice_num, pda.po_header_id , aia.invoice_date --10.0.0.3
, aia.creation_date) aia,
(select haou2.organization_id, haou2.name
from fnd_flex_value_sets ffvs,
fnd_flex_value_norm_hierarchy ffvnh,
fnd_flex_values_vl ffvv,
hr_all_organization_units haou1,
FND_FLEX_VALUE_CHILDREN_V ffvcv,
hr_all_organization_units haou2
where ffvs.FLEX_VALUE_SET_NAME = 'CAP_CODE_BU'
and ffvs.FLEX_VALUE_SET_ID = ffvnh.flex_value_set_id
and ffvnh.parent_flex_value like 'PO%'
and ffvv.FLEX_VALUE_SET_ID = ffvnh.flex_value_set_id
and ffvv.FLEX_VALUE between ffvnh.child_flex_value_low and ffvnh.child_flex_value_high
and substr(haou1.name, 1, Instr(haou1.name, '-')) =
substr(ffvv.DESCRIPTION, 1, Instr(ffvv.DESCRIPTION, '-'))
and haou1.organization_id = fnd_global.org_id
and ffvcv.parent_flex_value = ffvnh.parent_flex_value
and ffvcv.flex_value_set_id = ffvs.flex_value_set_id
and substr(haou2.name, 1, Instr(haou2.name, '-')) =
substr(ffvcv.DESCRIPTION, 1, Instr(ffvcv.DESCRIPTION, '-'))
union --10.0.0.1
select f.organization_id, f.name --10.0.0.1
from hr_all_organization_units f --10.0.0.1
where f.organization_id = fnd_global.ORG_ID --10.0.0.1
) bu
, po_line_locations_all plla --10.0.0.4
, gl_code_combinations_kfv gcc1
,gl_code_combinations_kfv gcc2
where pv.vendor_id = pha.vendor_id
and pla.po_header_id = pha.po_header_id
and pda.po_header_id = pha.po_header_id
and pha.po_header_id = rsl.po_header_id(+)
and pda.project_id = ppa.project_id(+)
and pha.po_header_id = aia.po_header_id(+)
and aia.po_header_id = pha.po_header_id
and pla.org_id = haou.organization_id
and pha.authorization_status in ('APPROVED', 'OPEN')
and plla.po_header_id = pha.po_header_id --10.0.0.4
and plla.closed_code in ('APPROVED', 'OPEN', 'CLOSED FOR INVOICE', 'CLOSED FOR RECEIVING', 'CANCELLED') --10.0.0.4
and bu.organization_id = haou.organization_id
AND gcc1.code_combination_id = pda.accrual_account_id
AND gcc2.code_combination_id =rsl.CHARGE_ACCOUNT_ID
In the following query I have commented receipt_num using the table rcv_transaction_headers.
If I uncomment it the query results huge number of unexpected report.
How can I add receipt number to the following query?
Should I use rcv_transactions. If yes, what would be the join conditions.
Kindly help as its urgent.
Thanks in advance.
Regards
AvijitSandeep is correct. I don't have time to tell you the correct query, but mine is something like this based on Sandeep's information:
SELECT rsh.receipt_num
FROM rcv_transactions rcvt,
po_lines_all pla,
rcv_shipment_headers rsh
WHERE rcvt.shipment_header_id = rsh.shipment_header_id
AND rcvt.PO_LINE_ID = pla.PO_LINE_ID
AND pla.item_id = (select distinct inventory_item_id
from mtl_system_items
where segment1 = '1216107-2') -
How to set the default query for query component.
I have a query component on the page, and there are 2 system query in the saved search dropdown list.
Here is my system saved search
Saved Search:
Search by worker
Search by organization.
when the page load the default search panel is always search by worker.
I want to default the search panel search by organization. How do I implement this.Thanks for your reply. Maybe I not describe my question clearly, I want to display different search form.
For example
when search by work, the search form displayed as firstname, lastname, gender etc.
when search by work, the search form dispaly as organization name , manager name etc.
I resolve this issue by customize the queryMode object. -
How to format better my query for a report?
I have a shell script to run sql queries to get database information everyday.
However here below, I want some columns to be indented to the right, and I also want to format the column with %.
Also for the column name , underneath the column name, there are lines which very long and over one line, how to make it within a linesize?
Checking DataGuard Status/Information
message error time
FACILITY SEVERITY DEST_ID number code CAL stamp MESSAGE
======================== ============= ========== ========== ========== === ========= ================================================================================================================================================================================================================================================================
Thanks,Refer the below link for all format models and elements..etc
http://docs.oracle.com/cd/B19306_01/server.102/b14200/sql_elements004.htm
Hope this helps,
Regards
http://www.oracleracexpert.com
Transportable tablespace export and import
http://www.oracleracexpert.com/2009/09/transportable-tablespace-export-and.html
Oracle data pump export/import with examples.
http://www.oracleracexpert.com/2009/08/oracle-data-pump-exportimport.html -
How to write the SQL query for generating triangular numbers
Hi,
I have a table ..which stores the sequence number like this
Seq :
1000
1200
1300
1500
1800
1900
Now i want to get a result like this
1000 1000
1200 2200
1300 3500
1500 5000
1800 6800
1900 8700
how can it be achieved. I tried using Lead and lag. but only I can add the n+1 or n-1 results. Please help.I've never heard it called 'triangular numbers' before but I think you're looking for a 'running total':
SQL> WITH data AS
2 (
3 SELECT 1000 AS num FROM dual UNION ALL
4 SELECT 1200 AS num FROM dual UNION ALL
5 SELECT 1300 AS num FROM dual UNION ALL
6 SELECT 1500 AS num FROM dual UNION ALL
7 SELECT 1800 AS num FROM dual UNION ALL
8 SELECT 1900 AS num FROM dual
9 )
10 /* END SAMPLE DATA */
11 SELECT num, SUM(num) OVER (ORDER BY num) AS running_total
12 FROM data
13 ORDER BY 1
14 ;
NUM RUNNING_TOTAL
1000 1000
1200 2200
1300 3500
1500 5000
1800 6800
1900 8700
6 rows selected. -
How to frame the select query for wildcard search.
Hi Experts,
I have an input field P_USERALIAS.This value could contain the actual value or the wildcard for example : user can enter P_USERALIAS as SAP123 or S or SAPABC123 . I need to generate a dynamic search on table USREFUS depending on what has been entered.Please help.
Useful answers will be rewarded.
Regards,
Shrita Sharma.THIS IS A TEST REPORT FOR WILDCARD SEARCH**
TABLES: USREFUS.
PARAMETERS: P_NAME1 TYPE string.
RANGES: R_NAME1 FOR USREFUS-USERALIAS.
DATA: T_usrefus LIKE usrefus OCCURS 0 WITH HEADER LINE.
*replace
if p_name1 cs '*'.
replace all occurrences of '*' in p_name1 with '%'.
SELECT * FROM usrefus
INTO TABLE T_usrefus
WHERE useralias like P_NAME1.
else.
SELECT * FROM usrefus
INTO TABLE T_usrefus
WHERE useralias = p_name1.
endif.
LOOP AT T_usrefus.
WRITE: / T_usrefus-useralias.
ENDLOOP.
**THANKS & REGARDS
SHRITA SHARMA. -
How to remove the page break for CSV report
Hi,
I'm working on a rdf report and have an issue with page break.
As usual there exits a page break in the report output. how do I remove it.
work around: set Page break before/after : NO
worked on margin re-size, how ever could not resolve the issue.
Can any one help me on this.
Thanks in advance.
Thanks,
SanthoshThere are two ways to do this:
1) If you want to remove and individual dimension from a presentation, you can hide the dimension. This can be performed directly from within QueryBuilder. Within the first section of Query Builder that shows the selected measures selected and associated dimensions, simply remove the required dimensions from the right dialog panel.
2) To hide all page items within a presentation, simply add the following the property, pagingControlVisible="False", to the presentation tag in your JSP. For example:
<orabi:Presentation location="Local Computer Sales/Products/KPI Sales Prior Period and Prior Year" id="BIProductKPIs_pres2" pagingControlVisible="False"/>
Hope this helps
Business Intelligence Beans Product Management Team
Oracle Corporation -
How to mofidy the selection text for a report
Dears,
Do you know how to modify a selection text in the selection screen of a standard report, such as changing "Storage Location" in the selection screen of report MB5B to "storage Loc"?
one of a way to realize it is to modify the text of relevant data element.
except modifying the data element directly, It seems that use SE63 could do it, but I forgot how to use it.
Thanks all for your reply.
ZhongkaiHi Liu,
Check this link for translations thru SE63:
http://help.sap.com/saphelp_sm310/helpdata/en/b4/54601d77f38e429ffad9e3e11c1b25/content.htm
Hope this helps you.
Regards,
Chandra Sekhar -
HI
how to check RBS maintainer is running after deleting orphan blobs and while deleting the blobs from rbs storage,
and also how to stop the RBS maintainer for a specific content db.
when I run below query I found the orphancleanup value true
SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
where config_key='orphan_cleanup_in_progress'
adilHI
the RBS maintainer was run from one of web front end server And for one content database , that fine
but I now know this information only this did by other administrators.
Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and also I found this maintainer running I checked from when run sql queriy in sql
server
SELECT
[config_key],[config_value]
FROM
[mssqlrbs_resources].[rbs_internal_config]
where
config_key='orphan_cleanup_in_progress’
it given me true
here now I want to stop this orphan cleane up , what settings and script I will run?
adil -
How to restrict the Null Values for Key Figules in the Bex Query
Hi Friends,
I want to restrict the Null values of a perticular key figure in the Bex Query Output.
I will explain in details. i have 3 key figures in my query.. let us assume.. key1 key2key3
key1 key2 key3
4 4 100.00
5 0 200.00
1 0 19.00
0 1 10.00
i don't want to see the the records for which key 2 is 0.
we have a setting in the Bex Query for restricting the Zero values in the query properties. If we enable that setting it will show
4 4 100.00
but i want the report to display..
4 4 100.00
0 1 10.00
can any body guide me. <b>i want to display the values if key2 <> 0.</b>
Regards,
Nagesh.Hi AVR,
nice to see reply.
can you eloborate your view...how can i put the condition.
<b>i want to put the condition key2 <> 0.</b>
Regards,
Nagesh. -
HT204291 how do get the media icon for mac mirroring when running airplay on itunes?
how do get the media icon for mac mirroring when running airplay
Airplay mirroring requires a Mac from 2011 or later, running OSX 10.8 (or later)
http://support.apple.com/kb/HT5404?viewlocale=en_US&locale=en_US -
How to analyse the time taken for a query
Hey gurus ,
How to find the time taken for a query to execute .
Regards,
VenkateshHi,
Time taken to execute a query = FRONT END TIME + OLAP TIME + DB TIME.
front end time is time taken to do format in BEX.
olap time is time taken to aggegate data in OLAP buffer.
db time is tme taken to collect data at data target.
to fine all these information
goto RSRT -> give query name -> execute+debug -> it will display all the fields > check fields what ever u want.
Regards,
Haritha. -
How to transport the BW query's variable to BO webi report
Hi all
I'd like to know how to transport the BW query's variable to BO 's webi . today ,I created a sap customer varible in my bw system to get the max calmonth in the active table.The varible in the BW side run's well ,but I use this query to build a new univers ,and created a new webi report base on this univers ,but the question is the webi report can't get the varible's value I wann to know how to transport the bw varible value to BO webi report
Thanks and regards,
Peter .zhuI have changed my variaable in my bw query ,I found if you use SAP default variable it is ok in BO side . So I get a guidline by SAP default variable ,I changed my customer variable in variables edite ,don't use 'ready for input' .And then the variable can be useful in BO side .
Edited by: peter zhu on Jun 16, 2008 11:43 AM -
How to know the timings of the run time of thr report
Hi,
Can you please tell me how to know the run time of the query , i mean how much time it took for the query to dispaly the results .
Also we have these queries in the workbook. How to refresh the work book . is it enough if i refresh the query.
Thanks
SruthiHi
How can we check in RSRT tcode?
And how can we do i RSRTRACE?
Can I know the procedure.
Maybe you are looking for
-
Installing on EBS R12 on Windows 7 Home Premium 64 Bit??
Hi Experts, I ordered a Lenovo laptop with 500GB just for installing EBS R12. It came with Windows 7 Home Premium 64 Bit..............Is there any article with step by step procedure?? What are your comments on Installing on Win 7 64bit?? Thanks in a
-
Split and incorrect view of folders
Am running up-to-date LR 5. Migrated files from Windows Vista to iMac a year+ ago. The view of the Folders is split. This issue started after the migration to Mac. I'll try to show the file structure that LR displays. > Pictures > Lightroom photo
-
SSIS 2012 -Not Executing file from other server.
Hi Experts , I am working on SQL 2012 I have a SSIS Package - 1) Execute SQL Task - calling Storeprocedure my StoreProcesdure contain OpenRowser Query which Pull Data from Excel and Load into SQL Table. Scenario 1 On Development Server example IP:
-
Simple database query syntax question
Hi experts, I am just stucked here... e.g. String Name = "John Doe"; String query = "select * from table where NameCol = "+Name; ResultSet rs =stmt.executeQuery(query); while (rs.next()) { System.out.println(rs.getString(NameCol); The complier compla
-
SCSM View access control not working
I have 15 odd each SCSM Incident and SR roles, one for each support group. Each role contains an AD group, populated with users. No OTB roles contain any users other than the admin role. Each role is granted access to only the views for SR and IM t