How to archive data belonging to a company code only?

HI,
I would like to archive and backup the data related to a company code only. Does sap have a function which can allow me to do this? Please advise.

Hi Raja,
I guess you will have to eloborate about your requirements and purpose.
Assuming you are talking about archiving financial accounting documents, yes data belonging to a particular company code can be archived. You will have to use data archiving for this. Before even archiving, you will have to do proper customizing related to archiving.
Have a look at this links to get a better idea:
Link:[http://help.sap.com/saphelp_erp60_sp/helpdata/en/6d/56a06a463411d189000000e8323d3a/frameset.htm]
Link:[http://help.sap.com/saphelp_erp60_sp/helpdata/en/29/b6963457889b37e10000009b38f83b/frameset.htm]
I am not sure to have understood the 'backup' part.
Hope this helps,
Naveen

Similar Messages

How does committed date in STO- different company codes gets calculated

Dear All,
Please let us know How does committed date (ATP date) in the STO across different company codes gets calculated
Regards
Ahmad Idais

Hello,
RA is always a Company Code specific process due to the possibility of financial postings. I think that your WBS structure better be reconsidered not to mix up different Company codes at different levels, but maybe having a parallel nodes for different Company codes.
I also believe there is a consulting OSS note to explain the standard system behavior, just search the OSS.
Since you already have a master data in place it must be quite easy for you to test how the system behaves.
Regards,

OBR2 to delete Master data (GL/AP/AR) company code only.

Hi Expert,
With reference to the subject of this topic, the Tcode of OBR2 can only be used to delete GL/AP/AR master data created (without any posting yet) in general and company code level.
If the master data (My case is vendor and customer) created using XD01 and XK01, which has Contact person information stored. I can't use the OBR2 to delete the customer/vendor created with sales/purchase information.
Kindly advise whether there is any other Tcode can delete the customer/vendor created with sales/purchase information?
Thanks and regards,
sbmel

HI Sap Gurus.,
i tried with OBR2 T code
Given range of GL Accounts and i put for those as deletion flag in FS00
choosen Check box only general master data in Chart of Accounts
and
In Program Control
Selected below check box
Deletion per deletion flag only
GL account Detail log
And I Deselcted Company code Productive check box in SPRO.
But the GLs are not deleted.
Some help me please in this regard
Cheers.,
Manoj Kumar Pedada

FU 065:-Document belongs to cross company- code transaction(error massage)

Hi expert,
I am going to reverse a document (after resetting through LSMW,useing -F.80 as for mass reversal) and getting a error massage below(this document has been generated after F110)
FU 065:-Document belongs to cross company- code transaction(error massage)
Please advise me how can I reverse this document and also advise me what does it mean,
Will it be done by FBU8? (But when I am using it,showing two documents what does it mean and advise should I select both document for reversal)
Please advise
Thanks & Regards

Hi
Thanks for your quick advise,
I am trying to do that through FBU8 but I am getting there two documents numbere inside for reversal (it contained two documents)
Should I reverse both documents or I should select one one only
Please advise why it is showing two documents inside
Thanks & Regards

Extend article wrt. different store which belong to different Company code

Hi experts !!!!
Would like to get u r suggesations
We have Scenario like two company codes.
In First company code we have one Distribution centre and in Second Company code we have five store
The Article we have created in distribution Center belongs to First Company code
and same Article we need to extend to all store which belong to second company code
please advice
thanks in advance

The scenario is called Cross Company Code Stock transfer.
If your company's distribution center and store belong to different company codes and you need to transfer goods from one to the other, you must create a stock transport order with document type NB. This involves the process stock transfer with billing document. As in normal stock transport orders, an SD delivery with a
specific delivery type (NLCC) is created for this combination of supplying site and document type NB. This ensures that an invoice can be sent to the store.
Read more in detail on below mention link.
http://help.sap.com/erp2005_ehp_03/helpdata/en/4d/2b917843ad11d189410000e829fbbd/content.htm

Not needed company code - how to archive data in one run?

Hello experts,
A great day to all of us.
I am challenged by this situation. Currently, our company decided to delete an organizational value (company code, plant, controlling area etc.) DE05. Hence, prior to that, I should be able to archive all files that is related to this company code. I am familiar with SARA but it will require me to go through all archiving objects.
My question is, does anyone know of an easier way to do this? Any suggestions are welcome.
Thank you!
Mark

Hello experts,
A great day to all of us.
I am challenged by this situation. Currently, our company decided to delete an organizational value (company code, plant, controlling area etc.) DE05. Hence, prior to that, I should be able to archive all files that is related to this company code. I am familiar with SARA but it will require me to go through all archiving objects.
My question is, does anyone know of an easier way to do this? Any suggestions are welcome.
Thank you!
Mark

How to restrict user to process own company code data in z program

Hi All,
I have this issue. in asset management I would like to restrict user to process its own company data.
for example A who works in company 0123 only can process comp code 0123 data whereas X who is manager can process all company code data.
In the abap program, how can i achive this? by authority object? if yes what asset management authority object to use?
i have company code in selection screen. so may i know what method i can achive so that A can only execute co 0123 whereas X can do for all company code.
thanks

Hi,
One way would be:
For all persons for whom you would like to 'control' the access to a specific company, SU01-->Parameters--->Give some parameter ID say XXX, & in PArameter Value key in the compnay code whose data it can process.
Please note that this is only one time process which has to be carried out for all the users. Then in your z-program in SELECTIO-SCREEN OUTPUT use GET PARAMETER ID 'XXX" Field w_value. If GET PARAMETER ID returns su-subrc = 0 then move w_value to your company code on the selection screen. Then Use LOOP AT SCREEN & make SCREEN-INPUT = '0' for company code so that company code will be displayed but protected thus not allowing the user to change the company code.
I hope this helps,
Regards
Raju Chitale

How to archive data which is in sap content server

Hi Experts,
We are facing issue with data stored in content server. With the time the data which is in content server is increasing and reaching the size limitation of content server. We want to archive data which is already present in content server.
Is there any stategy for this and how we can archive the data which is already inside sap content server.
Thanks.
Regards
Richa Koolwal

Thanks Ajay,
It really helps to ansewer some of my questions.
I would like to ask some more information for content server to you. As you said content server will allow to increase the database size upto 64TB and advise for the either of the 2 activiteis.
1. If I shift the data which is old to some other storage, should that storage device be connected to content server.
e.g If I have decided to store data on some file system I have to connect file system with the content server with the specific driver for file system.
2. Next you said to install new content server, but as I know content server provide us the facility to connect to various instances of database system if one of the instance reaches its limit of 64 TB, so would it be good to install some other instances of database or the new sap conent server.
3. Which storage media (File system and Instance of Database) is prefferable in terms of cost and security to enhance the scalability of content server.
Thanks.
Regards
Richa Koolwal

How to archive data for SAP ISU&Billing Systems

Hi All,
Can any one tell me the procedure that how do the archiving data for SAP ISU-Billing Systems
Regards

Please check this thread you will get some idea about this.
[Billing for Archiving|http://help.sap.com/saphelp_utilities472/helpdata/en/97/276c359513cf41e10000009b38f839/frameset.htm]
Regards,
Siva

How to change chart of account to company code

Dear Guruu2019s
I am new SAP FICO . I got the following thread . I have configured the company code through copy the existing company code. Now I want to change the Chart of Account to this company code. I gone to T code OB62 from position go to my company code I changed the chart of account but while saving the file I got thread u201CReset company code data before changing the chart of accountsu201D
How to go further could anybody explain me.
Thank you in advance
krishna

If you really want to allocate a different chart of accounts to the company code, first of all reset the company-code specific data for the old chart of accounts.
1. First of all you must, if it exists, reset the transaction data for this company code.
2. Finally, carry out the resetting of the company code-dependent G/L account master data (without the general master data).
Note:
When dealing with large quantities of data, resetting the master data or transaction data can be very time-consuming. In this case, it is advisable to schedule the running of these reports as a batch run.

How to assign chart of account to company code

hi all,
          i am using SAP ECC 6.0
           in my hierarchy , i follow following menu path for assigning company code to chart of account but there is no option there
my menu path is as follows :
Financial Accounting (NEW) -> General Accounting New -> Master Data -> G/L Accounts -> Preparations
   and in sub menu (of Preaprations) following options there :
1) Revise Chart of Accounts (only documentation)
2) Edit Chart of Accounts List
3) Define Account Group
4) Define Retained Earnings Account
also one more hierarchy is ther name as : Additional Activities , but no option for Assignment of company code to Chart of account (COA)
now , how can assign company code to chart of account
plz help
regds
shailesh
Moderator: Please, avoid asking basic questions

Hi,
Financial Accounting (New)-Financial Accounting Global Settings (New)-General Ledger Accounting (New)-Master Data-G/L Accounts-Preparations-Revise Chart of Accounts,Edit Chart of Accounts List,Assign Company Code to Chart of Accounts,Define Account Group,Define Retained Earnings Account
Direct try this Tcode is OB62 or logoff thesap and logon
Regards,
Kanike

PO with Vendor that not belong to PO Company Code Header.

Hello MM Gurus,
When I create a PO with Company Code 0001, and the system let me selected a vendor who belongs to company code 0002. I would like to create PO with the same vendor a company code header only.
Any Suggestions please let me know.
Regads,
Hector.

Hello Charlie,
The vendor was just created in one company code(0002), and when I created the PO header data for company code 0001, the system don't send any error.
I really believe that standard system couldn't create PO with different company code. ¿It's possible in the Vendor Master Data, in particular the Purchasing Views, check some box to avoid this situation?
Please let me know,
Regards,
Hector.

To limit the access of PM data based on the Company Code, Plant & Location

Hi Experts,
         I have a requirement . Customer wants to Restrict the access of PM data for a user based on the company code,
Plant & Location.
Say user : XYZ
Plant :1000
CCODE:1000
Location:0001
So you can see data of only this Organisation structure .No other data will be visible to him.
I know we can do it using authorisation object
Can you Suggest me how can we do this.
Regards,
Amar

Hi,
You can achieve this by maitaing these values in user authrisations. If you want more info about the objects check SU22 t code under PM.
For Plant              I_IWERK
For Location       I_ILOA
Regards,
N.Nagaraju

How to change posting period for a company code

Hi Gurus,
In MIGO while doing goods receipt i get this error " Posting only possible in periods 2006/05 and 2006/04 in company code 3000"
How to change the posting period.
I have serched in SDN, i tried transaction MMPV, and OB52 but i am not able to change as i dont know the basics of the screen as i am ABAPER.
Can u tell me how to change. or give sme link with some snapshots.
Thanks

hi
I think you need to check your fiscal year varian before you do the MMPV. Fiscal year is set up by the FI consultant and it is deciding in which fiscal year period your current month belongs to.(Transaction -OB29)
Ex:
if you use K4 fiscal year variant then this october month is treated as 2010-07 period. Because the fiscal year starts from April and 2010 fiscal year starts from 2009 april.
Calendar Year                 Fiscal year
2009 april                =       2010 - 01
2009 may                =       2010 - 02
2009 Oct                 =       2010 - 07
So first get the fiscal year and period accurately (I suggest get it from your FI guy) and put it in the MMPV
If you accidentally close a wrong period dont forget to follow these notes too.
545952,369637 AND 487381
thanks & BR
sandun

How to pass the currency of particular company code into a text variable.

Hi
I want to pass the currency of particular company code into a text variable.
The company code is selected by the user using Input variable "0S_COM_M".
I have created a text variable "ZD_CURR" with processing type customer exit.
I have written the following abap code but its not working.
DATA : LV_CURR type /BI0/OICURRENCY.
WHEN 'ZD_CURR'.
    IF I_STEP = 2.
      CLEAR XTAB.
      READ TABLE I_T_VAR_RANGE INTO XTAB WITH KEY VNAM = '0S_COM_M'.
      SELECT SINGLE CURRENCY FROM /BI0/PCOMP_CODE INTO LV_CURR WHERE COMP_CODE = XTAB-LOW.
      L_S_RANGE-LOW = LV_CURR.
      L_S_RANGE-SIGN = 'I'.
      L_S_RANGE-OPT = 'EQ'.
      CLEAR E_T_RANGE.
      APPEND L_S_RANGE TO E_T_RANGE.
    ENDIF.
Pls let me know how to resolve this issue or what modification can be done to this code.
Is there a way where we can debug customer exit code for variables.
Thanks.

Hi.
You should debug your code to check behaviour of it.
Just set external breakpoint (or create checkpoint via tc SAAB) and run your query.
You may run query via RSRT.
Regards.

How to archive data belonging to a company code only?

Similar Messages

Maybe you are looking for