How to arrange two items into a row in the webdynpro provided by SAP?

I am trying to custormize the ESS personal information - address info.
My question is that how to put two separate items (like City and Address) into a same row?
That is to change
City: xxx
Address: bbb
to
City: xxx Address: bbb
ps: I didn't got the NWDI, former changes were made by the ctrl + right clk.
Thanks in advance!

Hi,
As like Shemim said, you can set the RootUIElementContainer layout property as Matrix Layout and in the UI Element (ie. label), Change the layoutdata property to MatrixHeadData to start in New line and to the show in the label in same line, set layoutdata property to MatrixData
Regards,
Venkatesh. K
/* Points are Welcome */

Similar Messages

How to write two item in the same line?

In the smartforms,how to write two item in the same line?
eg
1 ************* 2 *****************
3 ************** 4 ******************
5 ***************
Anyone got any idea to do this.
Thanks in advance

Hi,
In the smartform the main windows is 20cm.I use the table output my data.Because the output is two item in same line,I define two rows in the table line type.
Question:
Should I define the table width 20cm?
In the main area of table , should I define two folders and each of folder include a line? The second item I had already defined as Append Directly,but the item 1 and item 2 don't in the same line.
Regards

How to add an item into the Newsstand

How to add an item into the Newsstand. Please do NOT reply using "tech-language." Use standard- normal everyday English. Thanks,
Don Otlin
Franklin Square, NY

Open Newsstand. Tap on the "Store" button in the upper right. Any newspaper or magazine you download from the store will appear in Newsstand.

SUM two fileds from different rows from the same table

I would like to SUM two fileds from different rows from the same table but I don't know how to do that.
E.g.
BillingTransactionsIndex      CreateDate      UserType      UserIndex      TransType      Reference      Total      Balance
2      6/5/2008 15:02      1      51      1      150      -288.2      -288.2
5      6/8/2008 11:55      1      51      1      157      -1.58674      -289.787
In the table above I want SUM fields Total and Balance for the first row and the the next row SUM 2nd row Total with 1st row Balance
Please help
Thanks

SQL> with tbl as
2 (select 1 as ID, 90 as total from dual
3          union all
4 select 2 as ID, 23 as total from dual
5          union all
6 select 3 as ID, 15 as total from dual
7          union all
8 select 4 as ID, 20 as total from dual)
9 select id , total, sum(total) over (order by ID) as balance from tbl
10 /
        ID      TOTAL    BALANCE
         1         90         90
         2         23        113
         3         15        128
         4         20        148
SQL>

ALV: how to display only subtotals and total rows in the output

ALV: how to display only subtotals and total rows in the output
i am getting output
i am getting subtotals for respective fields
but i want to display only subtotals and totals rows in the output
i have tried the
totals_only parameter in slis_layout_alv
but it is not working.

hi,
For TOTAL
For the amount field / quantity field in the field catalog give DO_SUM = 'X' for WHOLE total
For SUBTOTAL
For subtotal you will have to create an internal table sort..Let's say you want to do subtotal for each customer..
DATA: lt_sort type SLIS_T_SORTINFO_ALV,
ls_sort type slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-spos = 1.
ls_sort-fieldname = 'Give the field name that you do the sum'.
ls_sort-up = 'X'.
ls_sort-subtot = 'X'.
APPEND ls_sort TO lt_sort.
fieldcatalog-do_dum = 'X'.
for subtotals
WA_SORT-FIELDNAME = 'ERSDA'.
WA_SORT-SPOS = '2'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOTAL = 'X'.
APPEND WA_SORT TO IT_SORT.
Refer
http://help.sap.com/saphelp_erp2004/helpdata/en/ee/c8e056d52611d2b468006094192fe3/content.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-dev/doesnt-function-event-subtotal_text-in-alv-713787
regards,
Prabhu
reward if it is helpful

Using iMovie-does anyone knows how to put two videos side by side in the same screen/

Using iMovie-Does anyone knows how to put two videos side by side in the same screen?

See iMovie Help here.
http://help.apple.com/imovie/mac/10.0/#movb8c659f55

I can not drag graphic items into or out of the Creative Cloud library in Illustrator CC 2014

I've recently upgraded to the new 2014.1.0 release that includes linked Creative Cloud Libraries. However, it appears that my version of Illustrator is not allowing me to drag graphic items into or out of the library panel. I can use the menu prompts and panel buttons to add items to my library or document, however the drag feature is not working. You can see the issue in the screencast below. If anyone else is having this problem and has figured out a solution, I'd greatly appreciate it. It's worth noting that the panel works as advertised in other applications within Creative Suite CC. Thank you.
http://screencast.com/t/Uh3BwMrJty

Hello and thanks for your response!
I'm running OS X 10.9.5. I've tried restarting the machine and clearing preferences, yet the problem remains. I may try to reinstall the program to see if that corrects the issue.

Convert multiple rows into single rows for the respective index name

Dear Experts,
                         I want to convert multiple rows into single rows for the respective index name,
                        Here is my query.
SELECT user_tables.table_name, user_indexes.index_name, user_ind_columns.column_name
FROM user_tables
JOIN user_indexes on user_indexes.table_name = user_tables.table_name
join USER_IND_COLUMNS on USER_INDEXES.INDEX_NAME = USER_IND_COLUMNS.INDEX_NAME
where user_indexes.index_name not like '%PK%' AND user_ind_columns.column_name NOT LIKE '%SYS%'
ORDER BY user_tables.table_name,user_indexes.index_name;
Result of previous query
TABLE_NAME
INDEX_NAME
COLUMN_NAME
T1
IDX_ACCNTYPCFG1
ENABLE_SERVICE
T1
IDX_ACCTTYPCFG1
ACC_CODE
T1
IDX_ACCTTYPCFG1
ACCTYPE
T2
IDX_ACCTTYPCFGAPP1
ACCTYPE
T3
IDX_ACTLG1
MOBILE_NO
T3
IDX_ACTLG1
ID
Desired output required is
TABLE_NAME
INDEX_NAME
COLUMN_NAME
T1
IDX_ACCNTYPCFG1
ENABLE_SERVICE,ACC_CODE,ACCTYPE
T2
IDX_ACCTTYPCFGAPP1
ACCTYPE
T3
IDX_ACTLG1
ACCTYPE,MOBILE_NO
please help.

Maybe
with
user_tables as
(select 'T1' table_name,'IDX_ACCNTYPCFG1' index_name,'ENABLE_SERVICE' column_name from dual union all
select 'T1','IDX_ACCTTYPCFG1','ACC_CODE' from dual union all
select 'T1','IDX_ACCTTYPCFG1','ACCTYPE' from dual union all
select 'T2','IDX_ACCTTYPCFGAPP1','ACCTYPE' from dual union all
select 'T3','IDX_ACTLG1','MOBILE_NO' from dual union all
select 'T3','IDX_ACTLG1','ID' from dual
select table_name,
       case index_name when 'IDX_ACCNTYPCFG1' then 'IDX_ACCTTYPCFG1' else index_name end index_name,
       listagg(case column_name when 'ID' then 'ACCTYPE' else column_name end,',') within group (order by null) column_name
from user_tables
group by table_name,case index_name when 'IDX_ACCNTYPCFG1' then 'IDX_ACCTTYPCFG1' else index_name end
TABLE_NAME
INDEX_NAME
COLUMN_NAME
T1
IDX_ACCTTYPCFG1
ACCTYPE,ACC_CODE,ENABLE_SERVICE
T2
IDX_ACCTTYPCFGAPP1
ACCTYPE
T3
IDX_ACTLG1
ACCTYPE,MOBILE_NO
Regards
Etbin

How do I delete items from "My Activity" from the Community tab..

How do I delete items from "My Activity" from the Community tab?

You can't. The streams are uneditable even to the mods and admins. It's an ongoing data collection. You can only hide stuff by marking it as read in the relevant areas like your Inbox.
Mylenium

How to move excluded items into Measures in OBIEE 11g Pivot Table

Hi All,
Need your help. Previously I have about 25 facts in my pivot table as rows. Now I need to add about 10 more. Adding new criteria only put the items into Excluded section. How can I move all these new items at once to the end of the existing facts? What I can do now is moving them one by one, and in the middle of existing facts, then move it again, because I can point my cursor to the end of them directly.
Thanks a lot,
Gajah.

I've tried to drag the fact heading, but I can't point my cursor to the end of existing list of facts (unfortunately they are all in the same fact group name). Do you have any suggestion on how to put the new facts at the end of the list?
Thanks.

How to align web items on a row in BW 3.5

Hi All.
We are on BW 3.5. I have 4 drop down item to filter data in the web template. I have placed them next to each other on the WAD template. But when I run the report the drop downs appears one below the other.
I want the drop downs appearing next to one another on the same row but they appear one below the other.
I tried putting a HTML table of 1 row and 4 columns and placing each drop down into one cell but still the drop downs appear one below the other.
Please can you share ideas how to get these drop downs on the same row.
Thanks
Karen

Hello friend,
I just tried placing 4 dropdown boxes in a single row using a table of 1X4, and it works perfectly....
just remove the one u have now and try again....and please be sure that u are placing one webitem in one cell....
In HTML tab, check if the code looks like the following : all item should be padded between <table></table>
<TABLE cellSpacing=1 cellPadding=1 width="75%" border=0>
<TBODY>
<TR>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZVDNA"/>
         ITEM:            DROPDOWNBOX_1
</object></TD>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_2"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZBACCT"/>
         ITEM:            DROPDOWNBOX_2
</object></TD>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_3"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZCHEUE"/>
         ITEM:            DROPDOWNBOX_3
</object></TD>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_4"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZSYS"/>
         ITEM:            DROPDOWNBOX_4
</object></TD></TR></TBODY></TABLE>

How to show two items using $f_Show_On_Value_Item_Row

Hi,
I have a select list with values with Yes, No and two items(1 check box, 1 text field) below it.
I want to show two items if i select 'Yes' in select list.
I am able to show/hide one item using onchange="$f_Show_On_Value_Item_Row(this,'P1_A_EMAIL_PERS_REQ','Yes');"
How can i pass two items to this function.
Thanks for ur help in advance
Regards,
Ram

Ram,
Rather than putting the call to $f_Show... inline with the onchange handler, create a separate function and call that function does the work and call that function instead. See this thread for some more details:
Problem when calling more than 1 Javascript function
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen

Sapscript: How to combine two elements into a block when display ?

/E ITEM_CONDITIONS
/:   PROTECT
ZC &KOMVD-VTEXT&,,&KOMVD-KWERT&
/:   ENDPROTECT
/E TOTAL_AMOUNT_ITEMS
/:   PROTECT
ZC &KOMK-SUPOS&
/:   ENDPROTECT
Hi, all. May i know how to combine the two elements into a same block when displaying?
That's mean this two element content will not be split into two part between two pages when there is insufficient space in the front page.
Thanks.
Edited by: Jiansi Lim on Oct 8, 2008 12:24 AM

You can evoke the PROTECT..ENDPROTECT in the print program before the call of the text elements.
      CALL FUNCTION 'CONTROL_FORM'
        EXPORTING
          command = 'PROTECT'.
      CALL FUNCTION 'CONTROL_FORM'
        EXPORTING
          command = 'ENDPROTECT'.

How to display two item groups Side by Side (Horizontal)

I'm using Designer 9.04 and Hradstart 6.5 updated for designer 9.0.4.
I have two item groups defined in one of the forms module. I wand to display them side-by-side but the generated form shows the item groups one below the other.
Any idea how to solve this?
Thanks
Vimal

Is your window wide enough?
If nothing else helps, you can use the Relative tab stop editor to force generator to place the item groups horizontally. Set the tab stop scope of the item groups to parent and place them on two different tab stops.

How to Combine two queries into One

Hi Gurus,
SQL> select * from v$version;
BANNER
Oracle Database 10g Release 10.2.0.4.0 - 64bit Production
PL/SQL Release 10.2.0.4.0 - Production
CORE    10.2.0.4.0      Production
TNS for Linux: Version 10.2.0.4.0 - Production
NLSRTL Version 10.2.0.4.0 - Production
SQL>
I have following two queries. How I can convert these two queries into one with the same result ?
Q1
SELECT id,vdate,vendorname,venddate,vid
FROM VENDOR
WHERE processid=32
AND venddate is null
AND vid in(select vid from view_vid where type='PDX')
AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=55)
AND (id,vdate) in (select id,vidate from market_data where marketed_date is null)
AND id not in (select id from location)
Q2
SELECT id,vdate,vendorname,venddate,vid
FROM VENDOR
WHERE processid=20
AND venddate is null
AND vid in(select vid from view_vid where type='PBX')
AND (id,vdate) not in (select id,vdate from vkfl_is where task_id=40)
AND (id,vdate) in (select id,vidate from market_data where region_date is null)
AND id not in (select id from location)
I can UNION these two queries, but, is there any way I can write a single query with which gives me same result as above two queries?
Any help would be highly appreciated
Thanks in advance

Hi,
You can do something like this, which will be more efficient than a UNION:
SELECT id, vdate, vendorname, venddate, vid
FROM vendor
WHERE (   (    -- Conditions that apply only to q1
                           processid = 32
            AND vid       IN (SELECT vid FROM view_vid WHERE type = 'PDX')
            AND (id,vdate) NOT IN ( SELECT id, vdate
                                    FROM   vkfl_is
                                    WHERE task_id = 55
            AND (id,vdate) IN ( SELECT id, vidate
                                FROM   market_data
                                WHERE marketed_date IS NULL
        OR ( -- Conditions that apply only to q2
                 processid = 20
            AND vid       IN (SELECT vid FROM view_vid WHERE type = 'PBX')
            AND (id,vdate) NOT IN ( SELECT id, vdate
                                    FROM   vkfl_is
                                    WHERE task_id = 40
            AND (id,vdate) IN ( SELECT id, vidate
                                FROM market_data
                                WHERE region_date IS NULL
               -- The remaining conditions apply to both q1 and q2
AND     venddate   IS NULL
AND     id         NOT IN (SELECT id FROM location)
I hope this answers your question.
If not, post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) for all tables involved, and also post the results you want from that data.
Explain, using specific examples, how you get those results from that data.
See the forum FAQ: https://forums.oracle.com/message/9362002

How to arrange two items into a row in the webdynpro provided by SAP?

Similar Messages

Maybe you are looking for