How to align web items on a row in BW 3.5

Hi All.
We are on BW 3.5. I have 4 drop down item to filter data in the web template. I have placed them next to each other on the WAD template. But when I run the report the drop downs appears one below the other.
I want the drop downs appearing next to one another on the same row but they appear one below the other.
I tried putting a HTML table of 1 row and 4 columns and placing each drop down into one cell but still the drop downs appear one below the other.
Please can you share ideas how to get these drop downs on the same row.
Thanks
Karen

Hello friend,
I just tried placing 4 dropdown boxes in a single row using  a table of 1X4, and it works perfectly....
just remove the one u have now and try again....and please be sure that u are placing one webitem in one cell....
In HTML tab, check if the code looks like the following : all item should be padded between <table></table>
<TABLE cellSpacing=1 cellPadding=1 width="75%" border=0>
  <TBODY>
  <TR>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_1"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZVDNA"/>
         ITEM:            DROPDOWNBOX_1
</object></TD>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_2"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZBACCT"/>
         ITEM:            DROPDOWNBOX_2
</object></TD>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_3"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZCHEUE"/>
         ITEM:            DROPDOWNBOX_3
</object></TD>
    <TD vAlign=top><object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="DROPDOWNBOX_4"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_FILTER_DDOWN"/>
         <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
         <param name="IOBJNM" value="ZSYS"/>
         ITEM:            DROPDOWNBOX_4
</object></TD></TR></TBODY></TABLE>

Similar Messages

  • How to render web items based on the authorisation profile of the user

    Hello,
    Is there any way to render web items based on the authorisation profile of the user. The only way i can think of is:
    - Write ABAP to look up into the security mapping tables.
    - Convert the ABAP report into RFC-Enabled FM. The selection variables will be part of the import/export parameters of FM and table can be used to display the result.
    - Create HTML template using WAD, write Java Script to call the FM and map the import/export parameter. Display the result in Table.
    But i don't know How to use the Java Script to call Function Module (FM) and get back the authorization through parameter.
    Is anyone know about it or is there any other method to do it? I can't find any solution and it is very critical for me.
    Any help is highly appreciated.
    Rajat

    Hi Rajat,
    Do you mean that you want certain users to be able to use only certain web items? I think you can use the libraries for that and assign them to roles:
    http://help.sap.com/saphelp_nw04/helpdata/en/4e/0f813b420ce60ee10000000a114084/content.htm
    Hope this helps...

  • How to create web items with different quantities?

    Hi,
    I have B1 inventory items that are single items but we will be selling them on the web as 'packages' of different quantities.  For example, we would like the user to be able to select the web item, then be presented with a drop down (attribute) of case (10 items), 1/2 pallet (80 items) or full pallet (160 items).  Is it possible to setup a product line master which is a B1 inventory item, then define the child items, non B1 items, and somehow have the proper quantities ordered?  (ie. ordering 2 cases creates a B1 order for our parent item with a quantity of 20)
    If I can do this, I have another concern.  Since we are currently using our test database, if I setup all of these child items and create the parent/child relationships, will these be lost once we swtich the database over to our live/production database?
    Thanks,
    David

    Personally, I would add the javascript to the Item's description with additional drop downs there, upon selecting the drop down, this would populate the QTY field which i would hide via javascript as well, but will be passed on to the Cart/checkout page.
    There is a somewhat similar discussion here:
    [Re: Custom price logic|Re: Custom price logic]
    James

  • How to align the item text in the combobox vertically centred after increasing the height of the combobox in mfc?

    I want to make the item text of the combobox to  be aligned vertically(Centred) . Actually I increased the height 
    of the combobox and after the increasing the combobox height, the text is not centred vertically.The code
    snippet for increasing the height is as follows,
    m_SpecifyCombo.SetItemHeight(-1,20);//CCombobox m_SpecifyCombo
    After increasing the height the text in the combobox is not in the centre as shown in the below image,
    But I want the text to be centred as shown in the below image.
    Code snippet for owner drawn combobox:
    #if !defined(AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_)
    #define AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_
    #if _MSC_VER >= 1000
    #pragma once
    #endif // _MSC_VER >= 1000
    typedef enum {FONTS} STYLE; //Why have I enumerated, Cos, Maybe I might want something other than Fonts here
    class COwnerDrawCombo : public CComboBox
    // Construction
    public:
    COwnerDrawCombo();
    COwnerDrawCombo (STYLE);
    // Attributes
    public:
    void SetHilightColors (COLORREF hilight,COLORREF hilightText)
    m_clrHilight = hilight;
    m_clrHilightText = hilightText;
    void SetNormalColors (COLORREF clrBkgnd,COLORREF clrText)
    m_clrNormalText = clrText;
    m_clrBkgnd = clrBkgnd;
    static BOOL CALLBACK EnumFontProc (LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData);
    void FillFonts ();
    int GetSelFont (LOGFONT&);
    // Operations
    public:
    // Overrides
    // ClassWizard generated virtual function overrides
    //{{AFX_VIRTUAL(CCustComboBox)
    public:
    virtual void DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct);
    virtual void MeasureItem(LPMEASUREITEMSTRUCT lpMeasureItemStruct);
    protected:
    virtual void PreSubclassWindow();
    //}}AFX_VIRTUAL
    // Implementation
    public:
    virtual ~COwnerDrawCombo();
    // Generated message map functions
    protected:
    STYLE m_enStyle;
    COLORREF m_clrHilight;
    COLORREF m_clrNormalText;
    COLORREF m_clrHilightText;
    COLORREF m_clrBkgnd;
    BOOL m_bInitOver;
    void DrawDefault (LPDRAWITEMSTRUCT);
    void DrawFont(LPDRAWITEMSTRUCT);
    void InitFonts ();
    //{{AFX_MSG(CCustComboBox)
    afx_msg int OnCreate(LPCREATESTRUCT lpCreateStruct);
    afx_msg void OnDestroy();
    //}}AFX_MSG
    afx_msg long OnInitFonts (WPARAM, LPARAM);
    DECLARE_MESSAGE_MAP()
    //{{AFX_INSERT_LOCATION}}
    // Microsoft Developer Studio will insert additional declarations immediately before the previous line.
    #endif //!defined(AFX_CUSTCOMBOBOX_H__F8528B4F_396E_11D1_9384_00A0248F6145__INCLUDED_)
    // OwnerDrawCombo.cpp : implementation file
    #include "stdafx.h"
    #include "combobox.h"
    #include "OwnerDrawCombo.h"
    #ifdef _DEBUG
    #define new DEBUG_NEW
    #undef THIS_FILE
    static char THIS_FILE[] = __FILE__;
    #endif
    #define WM_INITFONTS (WM_USER + 123)
    //I chose 123 cos nobody might use the same exact number.. I can improve this by use RegisterWindowMessage..
    // COwnerDrawCombo
    //Initial values of the text and highlight stuff
    COwnerDrawCombo::COwnerDrawCombo()
    m_enStyle = FONTS;
    m_clrHilight = GetSysColor (COLOR_HIGHLIGHT);
    m_clrNormalText = GetSysColor (COLOR_WINDOWTEXT);
    m_clrHilightText = GetSysColor (COLOR_HIGHLIGHTTEXT);
    m_clrBkgnd = GetSysColor (COLOR_WINDOW);
    m_bInitOver = FALSE;
    COwnerDrawCombo::COwnerDrawCombo (STYLE enStyle)
    m_enStyle = enStyle;
    m_clrHilight = GetSysColor (COLOR_HIGHLIGHT);
    m_clrNormalText = GetSysColor (COLOR_WINDOWTEXT);
    m_clrHilightText = GetSysColor (COLOR_HIGHLIGHTTEXT);
    m_clrBkgnd = GetSysColor (COLOR_WINDOW);
    m_bInitOver =FALSE;
    COwnerDrawCombo::~COwnerDrawCombo()
    BEGIN_MESSAGE_MAP(COwnerDrawCombo, CComboBox)
    //{{AFX_MSG_MAP(COwnerDrawCombo)
    ON_WM_CREATE()
    ON_WM_DESTROY()
    //}}AFX_MSG_MAP
    ON_MESSAGE (WM_INITFONTS,OnInitFonts)
    END_MESSAGE_MAP()
    // COwnerDrawCombo message handlers
    void COwnerDrawCombo::DrawItem(LPDRAWITEMSTRUCT lpDrawItemStruct)
    //I might want to add something else someday
    switch (m_enStyle)
    case FONTS:
    DrawFont(lpDrawItemStruct);
    break;
    //I dont need the MeasureItem to do anything. Whatever the system says, it stays
    void COwnerDrawCombo::MeasureItem(LPMEASUREITEMSTRUCT lpMeasureItemStruct)
    void COwnerDrawCombo::DrawFont(LPDRAWITEMSTRUCT lpDIS)
    CDC* pDC = CDC::FromHandle(lpDIS->hDC);
    CRect rect;
    TRACE0 ("In Draw Font\n");
    // draw the colored rectangle portion
    rect.CopyRect(&lpDIS->rcItem);
    pDC->SetBkMode( TRANSPARENT );
    if (lpDIS->itemState & ODS_SELECTED)
    pDC->FillSolidRect (rect,m_clrHilight);
    pDC->SetTextColor (m_clrHilightText);
    else
    pDC->FillSolidRect (rect,m_clrBkgnd);
    pDC->SetTextColor (m_clrNormalText);
    if ((int)(lpDIS->itemID) < 0) // Well its negetive so no need to draw text
    else
    CString strText;
    GetLBText (lpDIS->itemID,strText);
    CFont newFont;
    CFont *pOldFont;
    ((LOGFONT*)lpDIS->itemData)->lfHeight = 90; //9 point size
    ((LOGFONT*)lpDIS->itemData)->lfWidth = 0;
    newFont.CreatePointFontIndirect ((LOGFONT*)lpDIS->itemData);
    pOldFont = pDC->SelectObject (&newFont);
    pDC->DrawText(strText, rect, DT_LEFT | DT_VCENTER | DT_SINGLELINE);
    pDC->SelectObject (pOldFont);
    newFont.DeleteObject ();
    void COwnerDrawCombo::InitFonts ()
    CDC *pDC = GetDC ();
    ResetContent (); //Delete whatever is there
    EnumFonts (pDC->GetSafeHdc(),NULL,(FONTENUMPROC) EnumFontProc,(LPARAM)this);//Enumerate
    m_bInitOver = TRUE;
    BOOL CALLBACK COwnerDrawCombo::EnumFontProc (LPLOGFONT lplf, LPTEXTMETRIC lptm, DWORD dwType, LPARAM lpData)
    if (dwType == TRUETYPE_FONTTYPE) //Add only TTF fellows, If you want you can change it to check for others
    int index = ((COwnerDrawCombo *) lpData)->AddString(lplf->lfFaceName);
    LPLOGFONT lpLF;
    lpLF = new LOGFONT;
    CopyMemory ((PVOID) lpLF,(CONST VOID *) lplf,sizeof (LOGFONT));
    ((COwnerDrawCombo *) lpData)->SetItemData (index,(DWORD) lpLF);
    return TRUE;
    int COwnerDrawCombo::OnCreate(LPCREATESTRUCT lpCreateStruct)
    if (CComboBox::OnCreate(lpCreateStruct) == -1)
    return -1;
    // TODO: Add your specialized creation code here
    if (m_enStyle == FONTS)
    //SetItemHeight(-1,30);
    PostMessage (WM_INITFONTS,0,0);
    return 0;
    long COwnerDrawCombo::OnInitFonts (WPARAM, LPARAM)
    InitFonts ();
    return 0L;
    void COwnerDrawCombo::OnDestroy()
    if (m_enStyle == FONTS)
    int nCount;
    nCount = GetCount ();
    for (int i = 0; i < nCount; i++)
    delete ((LOGFONT*)GetItemData (i)); //delete the LOGFONTS actually created..
    // TODO: Add your message handler code here
    CComboBox::OnDestroy();
    void COwnerDrawCombo::FillFonts ()
    m_enStyle = FONTS;
    PostMessage (WM_INITFONTS,0,0); //Process in one place
    int COwnerDrawCombo::GetSelFont (LOGFONT& lf)
    int index = GetCurSel ();
    if (index == LB_ERR)
    return LB_ERR;
    LPLOGFONT lpLF = (LPLOGFONT) GetItemData (index);
    CopyMemory ((PVOID)&lf, (CONST VOID *) lpLF, sizeof (LOGFONT));
    return index; //return the index here.. Maybe the user needs it:-)
    void COwnerDrawCombo::PreSubclassWindow()
    // TODO: Add your specialized code here and/or call the base class
    //Tried to do what Roger Onslow did for the button.. Did not work..?? Any R&D guys around :-)
    Can anyone please let me know how can I achieve this.
    Any help can be appreciated.
    Thanks in advance
    SivaV

    Hi sivavuyyuru,
    I cannot find a easy way to make this.
    I think you may need to draw your own Combo Box control. And you could change the edit control more like static text. Check the article:
    http://www.codeguru.com/cpp/controls/combobox/fontselectioncombos/article.php/c1795/Owner-Drawn-Font-Selection-Combobox.htm
    In the resource editor, Owner draw -> variable , Has string->true, type->drop list.
    The result:
    Best regards,
    Shu Hu
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • How to move Calculated Item in 3rd row in pivot  table.

    Hi experts
    I have calculated one calculated item in Piovt, Now i want to move it as 3rd row, So how can i achieve it.
    Thanks in advance
    Regards
    Frnds

    Hai Madhu,
    It is pretty simple.
    First u define a button. and in onAction  Event of the button write the following code.
    process is as follows:
    1)get the node
    2)get the element
    3)using the method remove_element() ,remove the element.
    <u><b>The Sample Code is as follows</b></u>
    DATA:
          node_flighttab                      TYPE REF TO if_wd_context_node,
          elem_flighttab                      TYPE REF TO if_wd_context_element.
        node_flighttab = wd_context->get_child_node( 'FLIGHTTAB' ).
      get element via lead selection
        elem_flighttab = node_flighttab->get_element(  ).
        node_flighttab->remove_element( element = elem_flighttab ).
    Follow the above code ,it will definately help you.

  • How to arrange two items into a row in the webdynpro provided by SAP?

    I am trying to custormize the ESS personal information - address info.
    My question is that how to put two separate items (like City and Address) into a same row?
    That is to change
    City: xxx
    Address: bbb
    to
    City: xxx     Address: bbb
    ps: I didn't got the NWDI, former changes were made by the ctrl + right clk.
    Thanks in advance!

    Hi,
       As like Shemim said, you can set the RootUIElementContainer layout property as Matrix Layout and in the UI Element (ie. label), Change the layoutdata property to MatrixHeadData to start in New line and to the show in the label in same line, set layoutdata property to MatrixData
    Regards,
    Venkatesh. K
    /* Points are Welcome */

  • How to align "New Item" icon

    Hi all,
    when I add an item to a region I can see the new item icon. In some cases the icon appears on the right of the item, in other cases it appears down the item.
    Is it possible to set the alignment of "new item" icon?
    thanks
    Marco

    Hi Marco -
    If you go the region properties (click the pencil icon on the region) on the attributes/style tab, the attributes section allows you to specify the order the attributes are shown in. The "New Item Indicator" is the attribute that you will want to shuffle the position in the selected attributes to put it in the same place in all region.
    Hope this helps,
    Candace

  • How to fix column / row as "header" in WAD (Web item Analysis) ?

    Hi,
    is there a possibility to fix a column or row as "header" in web item analysis? (like freeze panes in excel)
    When scrolling down, the header should always be displayed.
    Thank you very much in advance, best regards
    Frank

    We did a custom proof of concept on this back in 3.5 using CSS and/or javascript. At that time there was no BW solution for this.
    Don't know if 2004s has this ability or not. Here's a link to an example that shows how it can be done using CSS:
    http://home.tampabay.rr.com/bmerkey/examples/locked-column-csv.html

  • Web item "TABLE" -- How to hide rows of a particular column.

    HI,
       In the web item "table", is there anyway that i can hide the rows of a particular column(for example: material column) except the result rows.
    Here is the Query result:
    Customer
    Material
    KF1
    KF2
    KF3
    Result__________________________400_____700____300
    1001_________________Result_____150_____300____150
    _____________________10_________100_____200____100
    _____________________20_________50______100____50
    1002_________________Result_____250_____400____150
    _____________________10_________100_____200____100
    _____________________20_________150_____200____50
    After formatting the query result looks like:
    Customer
    Material
    KF1
    KF2
    KF3
    Result__________________________400_____700____300
    1001_________________Result_____150_____300____150
    1002_________________Result_____250_____400____150
    How can i hide the item rows except the "Result" rows of the material column?
    regards,
    ravi

    Dear Ravi,
    look in the BW WEB API Documentation on help.sap.com for more details (or just search in SDN for it).
    In General:
    - create class which inherit from CL_RSR_WWW_MODIFY_TABLE
    - redifine method CHARACTERISTIC_CELL
    - insert coding:
      if i_iobjnm eq '0MATERIAL' and i_IS_SUM is initial.
      free C_CELL_CONTENT.
      endif.
    - Insert the parameter MODIFY_CLASS with the name of your new class into your template
    result: you see the result of the column but not the single values.
    Hope this answer your question.
    Regards Marcus
    Message was edited by: Marcus Pospiech

  • How to multiple layers in the MAP web item?

    Hi experts,
    I'm working on a demo with BWGIS. I encounter several problems with the MAP web item.
    My demo:
    QA results visualized on global (region object - e.g. Europe, Asia), country (country object) and plant level. Use geo-drilldown to navigate into the lower layers functionality to get from the global view to the countries within one region and plants within one country.
    My settings:
    Region is a static geo-characteristic. For region I used the cont200.shp file. Also country is a static geo-characteristic, here I used cntry200.shp. For test I used ARCGIS to draw (points) some example plants in the country shape file. I uploaded this shape file to the plant object (also static).
    My success:
    I'm able to display the QA results in a separate global or country view within the 3.x Web template.
    My problems:
    A) The map web item in 7.0 does not display any data: it looks like no link can be made between the query result and graphic although we installed the latest IGS.
    B) I'm not able to drilldown from a global view to the countries within one region (doubleclick on one region in global view) within the 3.x Analyzer and 3.x Web template.
    My first question is about the concept of BWGIS:
    1) I want to use geo-drilldown (double-click) to navigate to the lower layers. For example in the global view I see only the QA result per region (shape file of region object) -> doubleclick on Europe, I expect to zoom in to Europe and see the QA results for all the countries in Europe (shape file of country object). How do I modell this in the web application designer?
    alt. 1a: 1 map – 1 layer - 1 dataprovider - underneath 1 query with region and country in the row is not allowed, so how to navigate between the two geo-relevant objects?
    alt. 1b: 1 map - 2 layers (2 shape files) - 2 dataproviders - 2 queries, one with QA result per region and one per country -> in that case both will be displayed at the same time, is not what I want. How to navigate between the two layers?
    alt. other ?
    2) I know how to make maps with multiple layers in ARCGIS, but do I need this for BWGIS, because one layer is one shape file? So do multiple layers in the map web item correspond to multiple layers in a ESRI ArcMap Document.
    More specific questions:
    3) Is there a lot of experience with the map web item in 7.0, documentation and working examples? Are there known problems (I can't find anything in sap notes). Is it better to still use the 3.5 Web Application Designer for this?
    4) There is very little information on SAP help, SDN and other forums about BEx Map and moreover the MAP web item. Does anyone have more documentation for me?
    Thanks in advance.
    With kind regards,
    Rick Stoll

    Hi Rick,
    I am working on the same topic. I am strongly interessted in solutions to your open questions, that you pulled forward in the past.
    Did you make any progress?
    Thanks in advance and regards
    Marcus

  • How to change the size of the web item text in WAD 7.0

    Dear All
    I am quite new to WAD and I am having a problem with changing the font size of a web text item
    I have searched already and someone suggested changing the Design property to  HEADER1 or HEADER2 etc and then I should be able to change the font / size.
    I have done this but to no avail
    I want to have large heading across the top of the web template
    am I using the wrong web item ?
    I know I can key the text directly into the web template and change the font from the menu bar  but I need it in an item as I want to export them through to PDF later
    Would be grateful of any help
    thanks
    Sandra

    Thank you all for your quick responses (I will award points once this is sorted)
    On the information you have supplied this has opened up yet another new part of WAD that I have not experienced ...TAGs
    Shubhranshu - I have done what you said but as I have never used tags I have just had a look around and found that I can insert Any Tag but not sure if I should be doing that.  If it is inert any tag , I chose FONT from the drop down and cbmAttributes defaulted into the custom tab for the class name but not sure what it wants in the Attributes and CSS Style tab, it won't accept what I am putting which is leading me to believe that I shouldn't be doing it that way.
    Venkat - thanks for the links they will prove very useful.  I've had a look and although they talk alot about the XHTML code for tags they don't actually say how you do it in the editor - I would like to produce one that way first and then see the code it generates for it.  I'm a bit apprehensive with changing the code direct as I don't want to mess anything up.
    Thanks again for your help

  • Reset Row Selection from Web Item Analysis in WAD 7.0

    Hi All,
    I have a Web Item Type Analysis and I use the Row Selection (SELECT_ROWS) value multiple.
    Is there a way to reset the selection via a function?
    The user select some rows and start a planning function via a button. If they would like to start the function for an other selection they first have to remove the old ones and have to mark the other lines.
    A function to remove all selection from the item is needed!
    PS: It is getting funny if there is paging and the selection is not even visible because it is on an other page.
    Thanks for help.

    Hello All.
    I have exaclty the same problem now.
    Is there any way to do this?
    Thanks a lot and best regards,
    Alfonso.

  • How to Customize the Web item " Text Elements"in WAD

    Hi All,
    Can any one let me know how to customize the web item TEXT ELEMENTS. When we place the web item Text element in the web template, it displays the query details and the info provider details.
    I question is I do not want to list all the list that is displayed in the text elements. I want to see only part of the list....can any one whether this is possible or not..if possible how...?
    Thanks in Advance,
    Hash

    yes you need to specify the variable name
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TEXTELEMENTS_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             <param name="GENERATE_CAPTION" value="BORDER"/>
             <param name="GENERATE_LINKS" value=""/>
             <param name="SHOW_COMMON_ELEMENTS" value=""/>
            <b> <param name="ELEMENT_TYPE_1" value="VARIABLE"/>
             <param name="ELEMENT_NAME_1" value="0H_CCTR"/></b>         ITEM:            TEXTELEMENTS_1
    </object>
    Regards
    Raja

  • How to copy List item from one list to another using SPD workflow using HTTP call web service

    Hi,
    How to copy List item from one list to another using SPD workflow using HTTP call web service.
    Both the Lists are in different Web applications.
    Regards, Shreyas R S

    Hi Shreyas,
    From your post, it seems that you are using SharePoint 2013 workflow platform in SPD.
    If that is the case, we can use Call HTTP web service action to get the item data, but we cannot use Call HTTP web service to create a new item in the list in another web application with these data.
    As my test, we would get Unauthorized error when using Call HTTP web service action to create a new item in a list in another web application.
    So I recommend to achieve this goal programmatically.
    More references:
    https://msdn.microsoft.com/en-us/library/office/jj164022.aspx
    https://msdn.microsoft.com/en-us/library/office/dn292552.aspx?f=255&MSPPError=-2147217396
    Thanks,
    Victoria
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • How to pass parameter values to a customer exit web item (WAD)

    Hi gurus,
    I have a wad with a data provider and a filter panel filtering that dp by using a variable. There is also a customer exit which saves the values of that variable into a z table.
    How can I pass the values of the filter panel to the customer exit web item?
    Thanks in advance,
    Rob

    Can you clarify your scenario? Which is the case you're talking about?
    1) You want to pass a parameter from OmniPortlet to a PL/SQL procedure.
    2) You want to pass a parameter from a PL/SQL procedure to OmniPortlet.
    In both cases the most obvious way of doing it is through request (URL) parameters.
    Render a link in your portlet (either in OmniPortlet or using PL/SQL) that invokes a portal page, containing the other portlet.
    Both OmniPortlet and PL/SQL allow you to wire and access page parameters.
    Take a look at the Using Parameter and Events section of the Portal User's Guide and the Parameters and Events section of the Portal Developer's Guide.
    Hope this helps,
    Peter

Maybe you are looking for

  • How do i get MS Office look sharper to a retina display?

    My MS Office 2011 doesn't look good, it ain't retina. Anybody knows if or when a update will come and support retina displays? or is there a

  • Time Management... using ZES table...

    Hi experts!! I need help with this dates problem.... I have to read the cluster B2, specifically ZES table, and I want to print the data for three differents weeks that I have in selection screen. When I see the information of the cluster in RPCLSTB2

  • How is it possible to define a ROI in a live image from a camera

    I try to establish ROIs in a live image from a Roper Camera.

  • Depreciation on Retirement

    Dear All I have purchased an Asset on 10.04.2008 for Rs. 3,00,000. Now i want to Retire/Sell it on 26.09.2008 for Rs. 2,50,000. How to calculate depreciation for the 26 days. What is the process? Please advice. Thanks and Regards Kanwaljit

  • 5600 lowest frequency

    Hello According to NI 5600 downconverts any frequency to 15Mhz(with 20Mhz bandwidth). but specification says 5600  has a range of 9Khz -2.7Ghz. what if the input frequency is 9Khz or lower than 15Mhz. what does it do .does it upconvert the signal to