How to assign Customizing Req to a customizing table ?

Hello All,
I've created a table with Delivery Class as C and some fields.
Now when I save this it is asking a Workbench request.
How shud I put them in a Cutomizing request ?
Regards,
Deepu.K

Hello Deepu
Customizing tables are, like all other tables, workbench objects and therefore will be transported using a workbench request.
Since the delivery class of your table is 'C' (= Customizing) the entries inserted into this table will be transported
- in a customizing request if the entries are client-dependent
- in a workbench request if the entries are client-independent
Regards
Uwe

Similar Messages

How to assign select-option values to internal table

hi all,
how to assign select-option values to internal table
thanks in advance.

Hi,
You just need to loop at your select-option field and take the values from low and high fields.
for. e.g
loop at s_werks .
move:s_werks-low to <your itab>
if not s_werks-high is initial .
move: s_werks-high to <youritab>
endif .
append <your itab>
endloop .
OR use select statement.
regards,
Omkar.
Message was edited by:
Omkaram Yanamala
Message was edited by:
Omkaram Yanamala

How to Assign a function module for customized IDOC

Hi,
I have created a customized IDOC. Can any body explain how to assign a FM for customized IDOC? Is same IDOC can be used for both Outbound and Inbound Process? In WE41 and WE42 we have to give the outbound and inbound function module name. can we give same function module? Is process code is same for both outbound and inbound process?
Valuable suggetions are appreciated.
Regards,
Ram

Hi ,
Here is the Procedure for the Inbound Idoc Funtion Module
Function Module : SE37
Message : WE81
Assign message : WE82
Assgin FM : we57
Process Code : WE42.
Assign Partner Profile - WE20,
To test the Inbound IDOC.
In WE19, Give the IDOC number & execute ... then put the cursor on the idoc control record . then click on the Standard Inbound push button on the application tool bar.it will show show all the details like partner no,type , message type , process code & function module name ...
now put a break point in the function module .. & debug .
if u r using customised inbound function module , then click on inbound function module .. there u will get a pop screen with FM name & debugging option in both background & foreground mode...
Reward Points if it is Useful.
Thanks,
Manjunath MS

How to assign a seq while creating a table

Hi,
How to assign a sequence such that i dont want to give the sequence while creation. i mean
if employee table is there
sl_no empname salary .....
i dont want to give sequence while inserting the data, i want to give the sequence at creation of table level for sl_no
i tried this
create table seqtest1 (id number primary key default rajseq.nextval);
but it is showing me the error
ERROR at line 1:
ORA-00907: missing right parenthesis
whats the solution
please help me
Thank you
Raj deep.A

Hi Raj,
You can not assign a sequence to a column while creating a table. you have two options for this. (So you can also use one sequence for multiple tables)
1. As Gasparotto said, you can create a before insert statement. OR
2. you can assign new sequence number in the program code. for example.
insert into xxx (user_id,name,surname) values (seq_userid.nextval,'Raj','Deep');
Good Luck.
Onur

How to assign a value(populate) a custom field in a PCUI page ?

Hi
I am working in SAP CRM on its web interface PCUI.
I have created a custom field "ZZ_NEWFIELD" through EEWB in Business Partner. It is visible in accounts transaction header (crmm_account).
Now if I create an opportunity for this business partner, I want to fetch the value of "ZZ_NEWFIELD" from BP Master and display it in opportunity(header) transaction.
Can someone tell me how to go about it ? I am novice to BSP applications.
Regards
Vishal

Thanks Francisco for your reply.
I have already posted it in the CRM forum as well but thought to place it here also.
As for the weblog you menioned, it just details the method of extending the field and placing it in the IView. I have done it already.
The problem I am facing is to how to populate this field ? I know the source field from where it has to get the data but I dont know the method/code to enable the value in new field placed in the Opportunity header.

Assign Bank account to the Customer

Hi,
How to assign bank account to the customer?? in AR or CM????
pls help me n step by step fashion...
thanks a lot n advance..

Hi Prety,
You may create or assign a bank account to a customer from the customer definition page in AR.
Query the customer, go to bank account definition page and define the bank details. Once you save the record the bank account is assigned to the customer or customer site.
The Bank and Branch information will then be available in CM. But the bank account information is maintained in payment tables (IBY).
Hope this helps.
Ramesh

How to assign custom rdf report as stylesheet PO communicator

R12 :How to assign custom rdf report as stylesheet PO communicator

Are you trying to have the table where the lines are always be the same size no matter how many lines are present?
If so, you some choices:
1) If your lines are always the same height, you might get some ideas on what to do from this article:
http://oracle.anilpassi.com/xml-publisher-developing-reports-printed-on-pre-printed-stationary.html
2) If your lines vary in height, then you should look into a PDF template. This will give you a pre-printed stationary look in which the drawing of boxes and lines is not affected by the data content.
3) Other less attractive options are a) making the report in XSL-FO, and b) making a bitmapped RDF report
There is currently no solution that I am aware of for a pre-printed stationary look using an RTF template in which the data lines are of variable height.

How to assign a Customer exit variable to Key figure

Hi,
I have created a Customer Exit variable to findout no. of days in the month.
But I dont know how to assign that variable to a Keyfigure value. Can you please let me know how to assign it.
Regards
Sankar

Hi Sankar,
From what I could understand, you want to display the output of that key figure for some no. of days of a month (calculated in your customer exit variable)...right ???
If that is the case then you can create a structure in columns. Create a new selection...include your key figure and that customer exit variable in it.
That shall serve the purpose.
Regards
Shalabh Jain
Edited by: Shalabh Jain on Dec 15, 2008 1:46 PM

How can i add an custom attribute and assign it to an existing custom object class in sun ds

I need to add an attribute to sun ds schema and assign it to an existing custom object class.
I know how to add an attribute but how can i add the attribute to an existing custom object class.
Please help.
Thanks

The objectclasses attribute is multi-valued, so you can add several values to it as long as they are unique.
For instance, I think you can add several declaration of the same objectclass as below (note the difference is the number of spaces in the value) howewer, from a schema perspective, only 1 will be taken into account:
objectclasses: ( 2.5.6.6 NAME 'person' DESC 'Standard LDAP objectclass' SUP top MUST ( sn $ cn ) MAY ( description $ seeAlso $ telephoneNumber $ userPassword $ CustomAttr) X-ORIGIN 'RFC 2256' )
objectclasses: ( 2.5.6.6 NAME 'person' DESC 'Standard LDAP objectclass' SUP top MUST ( sn $ cn ) MAY ( description $ seeAlso $ telephoneNumber $ userPassword $ CustomAttr) X-ORIGIN 'RFC 2256 ' )
That's the reason why it is safe to delete previous value if you want to update an existing objectclass. No problem to add a new objectclass (new oid and new name) to the schema.
-Sylvain

How to assign BO to a customized transaction .

hello gurus,
I am small querie,
How to assign CUSTOM OR STANDARD BO to customized transaction code.
Thanks in advance.
Regards,
Siraj

Ok,
I didn't wrote my requirement properly and sorry for that.
I wanna trigger a workflow for a customized transaction code.
Thanks in advance.
Regards,
Siraj

How to assign credit limit to customer group

hi,
sap gurus,
how to assign credit limit to customer group.
can we do that
if we can
plzhelp me
regards,
balaji.t
09990019711.

hi,
You can assign a credit limit to a group of customers, as well as to an individual customer. If a company has different branches, you would define the credit limit for just one customer in this group (the head office) and this customer account then becomes the credit account.
Procedure
To assign a credit account to a branch account, from the Credit Management screen, choose Master data - Change.
Enter the name of your customer, the corresponding credit control area and select the Status indicator.
The system displays the Change Customer Credit Management: Status screen.
Choose the function Edit - Change credit account. In the dialog box that appears, you can enter the credit account (the account number of the customer you are using) to set the credit limit for the entire group.
After you choose ENTER, the system contains the credit limit of the branch as 0.00. The Credit account field displays the account number of the customer for which the reference credit limit is defined.
You can only specify a credit account within a credit control area.
The accumulating total of receivables is recorded both for the reference customer and the "dependent" customer. However, the system checks only against the reference customer as to whether the credit limit has been exceeded.
When displaying the credit account, you can view which customers are referenced to this account. To do this, from the credit account master data screen, choose Edit - Cust. for credit acct.
regards,
Siddharth.

How to assign custom table entries to request

Hi,
I have around 4000+ entries in Z* table(Customized data).
Now i have to transport to QA system by assigning request no.
How to assign the above all entries to the request.
Thanks
~KER

Hi Ramesh,
That you can do it if you select
Recording routine as <u>Standard recording routine</u> under table maintainance generator.
But in my case the table has been created with <u>no,or user,recording routine</u> option and updated all records in dev system.
So its not possible at this point of time.
Thank you
~KER

How to select "ISO A" (auto) using Custom Controls with lever assigned to ISO change?

On 7D Mark II with firmware 1.0.4, I have used Custom Controls to assign ISO change to the lever. However, it is not possible to change ISO to "ISO A" (auto).  How to select "ISO A" (auto) using Custom Controls with lever assigned to ISO change?

Follow Up:
Ok so ive changed things up a bit and have had some more success.
I have used a Switch statement in my For loop to perform different actions based on the item selected.
The code looks like this:
Workbook.Content.Table1.Row3.AppropriationDetails.Row4.Cell1::change - (JavaScript, client)
var fFrom = xfa.resolveNodes("Workbook.Content.Table1.Row3.AppropriationDetails[*] .Row4.Cell1");
var fTo = xfa.resolveNodes("Workbook.Content.Table2.Row3.AppropriationDetails[* ].Row4.Cell1");
for (var i=0; i <= fFrom.length-1; i++) {
     switch (fFrom.item(i).rawValue)
     case "Option 3":
     fTo.item(i).rawValue = "Enter the details in the field below";
     break;
     default:
     fTo.item(i).rawValue = fFrom.item(i).boundItem(xfa.event.newText);
     break;
This code solves my problem but has thrown up a new issue:
When i select Option 1 or 2 from the dropdown list the change in the text field is instantaneous, however if I select Option 3 it wont appear in the text field until I either select Option 3 a second time or select another item. Its as if the text field is a selction behind what I have enterd in the dropdown list.
Any thoughts?

How to assign my custom VBA variable to a parameter

I want to be able to assign the value from my custom variable to a parameter from a script;
but I cannot figure out if it is possible;
I want to be able to manipulate a string using my VBA code, save this string to a variable, and pass it back to a one of the parameters on a page in a scripts, and continue playing the script with this new value instead, without using Data Bank;
Thank you for help.

Here is an example that sets a parameter named "UserName."
Private Sub RSWVBAPage_beforePlay()
Dim col As New Collection
col.Add "MyName"
RSWApp.SetParameterValues "UserName", col
End Sub
As you can see, this code is in the before play event. You must put this in before play in the page where the parameter exists. You can also use wild cards when identifying the parameter to be set.
For example, if you needed to look for UserName_784328732 (with a changing number value)
You could do the following RSWApp.SetParameterValues "UserName*", col
I hope this is helpful

How to change the reconciliation account in customer master record?

hi friends,
i created customer master with wrong reconsiliation account in XD01. i failed when i am trying to change that reconsiliation account in XD02. it was suppressed. how to change the reconcilition account in customer master data?

Hi,
Go to this path: Spro>Financial Accounting>Account Receivable & Account Payable>Customer Accounts>Master Data>Preparations for Creating Customer Master Data>Define Account Groups with Screen Layout (Customers)
Double Click on Your Group, Then Click on Company code Data under Field Status, Then Double click on Account Management, That screen you will find the Reconcilation Account, Select Requred Entry.
now it will coming Customer master.
It's useful assigne points as a way to say Thanks
Regards
gvr

How to assign Customizing Req to a customizing table ?

Similar Messages

Maybe you are looking for