How to assign filter rules in SLT

Hi Experts,
I am loading data from archives into HANA DB using SLT. I have careated a migration object by using the program IUUC_CREATE_ARCHIVE_OBJECT. Since I don't want to replicate the entire data into my HANA DB, So I have prepared certain filters.
So the problem here is automatic assignment of filter or mapping rules which is done for other migration objects (initial load and replication) by means of table IUUC_***_RUL_MAP will not work for the archive load objects. So in one of the blog I found that we have to assign corresponding rules to migration object manually. I am not finding any doc/blog which explains how to assign rules manually to a migration object. Guys Could you please explain me how to assign rules manually to a migration object.
Thanks in advance.

Hi, you are right - the rule is not assigned by an archive load. We have this option on our roadmap. So far there is no approach (also not a manual one) that can 100% ensures that the rule is assigned.
Best, Tobias

Similar Messages

How to assign Date Rules to Duration Types?

Hi gurus,
can someone kindly point where in Customizing do I assign a newly created Date Rule for a custom Duration Type? I created a new Date Rule to calculate the duration between two Date Types, but as I was creating my Date Profile i couldn't see any configuration to assign Date Rules to Duration types (in contrast, you can directly specify which date rules to use per Date type).
Regards,
Marc

Dear Experts,
Can any one let me know in inicident management process in sap crm 7.02 EHP2.
I do not see any entry in the first response by and due date by fields
please advise.
1.I am populating the SLA based on categorizations, in cat schema I have assigned the service product which has the service profile and the response profile.
2.please also let me know availabilty times should only be set for service provide BP or it should be for sold to party and the requester BP as well.
3.also once I enter the requestor the customer (sold to party) entry pops up but the system also suggest the requestor as well as sold to party... please let me know where am I wrong.
4. I have not touched the middleware part, however I see an error" document is being distributed changes cannot be possible" when I try to edit any incident, RFC or Knowledge article.. please guide me some steps to fix this.
5.what are the replication objects I need to consider if ineed to integrate the HR and FICO with SAP CRM.
from HR I need org structure and Employee master .
From FICO : ASsets please advise.
Appreciate if any one could answers these quieries.... thanks in advance.

How to reset junk rules and restart training?

My junk mail system has evidently developed a problem -- won't remember things that should be learned, and so on. How do I reset the junk rules and restart the training process? I think I've read somewhere that there's a file that has to be trashed, but I can't locate a likely candidate.
Thanks,
Steve.

The thing is, what Roger suggested doesn’t reset the junk filter. It just resets the database that stores what the junk filter learns through training, which may accomplish what you want, but is not what you asked.
To fully reset the junk filter, you must proceed as follows:
1. Go to Preferences > Junk Mail, disable junk mail filtering, then enable it again. This resets the rule that governs what the junk filter does.
2. Choose either Training or Automatic mode (it doesn’t matter) and leave the other options checked. Click Advanced to see how the junk filter rule is defined now if you want, but don’t touch anything there unless you really know what you’re doing.
3. Reset the junk filter database (Preferences > Junk Mail > Reset).
4. You may also want to open Window > Previous Recipients and get rid of any addresses that you don’t want Mail to treat as legit.

Help~~:'MD_SALES_ORDER_STATUS_REPORT' filter rule for MD04?

As you know we can use function 'MD_SALES_ORDER_STATUS_REPORT' to relate the (PR PR PlanOrder Prorder) with Sales Order.
But when the screen go to MD04,the number of (PR PR PlanOrder Prorder) showed is less than the function 'MD_SALES_ORDER_STATUS_REPORT' Export table IIOELX.
I want to know the filter rule of the order data?
How can?
Thanks a million~~

Lorryhappy,
It is not clear to me that this function module will perform the task that you expect.
Anyhow, have you looked at OSS notes [326325|http://service.sap.com/sap/support/notes/326325] or [325543|http://service.sap.com/sap/support/notes/325543]?
Rgds,
DB49

How to assign project specific task with the newly created projects ?

Hi All,
I need help. I need to assign project specific tasks (which i will be taking from staging table) other than the default task which are assigned during project creation. How do I proceed with this within same package. I am attaching the code of my package below...
CREATE OR REPLACE PACKAGE body xxpa_proj_conv_pkg as
PROCEDURE xxpa_create_project_proc(O_ERRBUF OUT VARCHAR2,O_RETCODE OUT VARCHAR2)
is
variables need to derive global parameters
v_responsibility_id NUMBER; --- PA Supervisor responsibility id
v_user_id NUMBER;
deriving global parameters-
-- Variables needed for API standard parameters
v_api_version_number NUMBER := 1.0;
v_commit VARCHAR2(1) := 'F';
v_return_status VARCHAR2(1);
v_init_msg_list VARCHAR2(1) := 'F';
v_msg_count NUMBER;
v_msg_index_out NUMBER;
v_msg_data VARCHAR2(2000);
v_data VARCHAR2(2000);
v_workflow_started VARCHAR2(1) := 'Y';
v_pm_product_code VARCHAR2(10);
---variables for catching errors---
v_error_flag number:=0;
-- Predefined Composite data types
v_project_in PA_PROJECT_PUB.PROJECT_IN_REC_TYPE;
v_project_out PA_PROJECT_PUB.PROJECT_OUT_REC_TYPE;
v_key_members PA_PROJECT_PUB.PROJECT_ROLE_TBL_TYPE;
v_class_categories PA_PROJECT_PUB.CLASS_CATEGORY_TBL_TYPE;
v_tasks_in_rec PA_PROJECT_PUB.TASK_IN_REC_TYPE;
v_tasks_in PA_PROJECT_PUB.TASK_IN_TBL_TYPE;
v_tasks_out_rec PA_PROJECT_PUB.TASK_OUT_REC_TYPE;
v_tasks_out PA_PROJECT_PUB.TASK_OUT_TBL_TYPE;
v_CREATED_FROM_PROJECT_ID varchar2(20);
v_CARRYING_OUT_ORGANIZATION_ID varchar2(20);
v_person_id NUMBER;
v_project_role_type VARCHAR2(20);
API_ERROR EXCEPTION;
v_a NUMBER;
cursor for project in data
CURSOR cur_project_in_data IS SELECT * FROM XXPA_PROJECT_IN_STG;
cursor for task data
CURSOR cur_task_in_data IS SELECT * FROM XXPA_TASK_IN_STG;
------------------------Cursors used for validations----------------------------------
cursor for product code used for validation
cursor cprc is select distinct PROJECT_RELATIONSHIP_CODE from PA_PROJECT_CUSTOMERS;
cursor for distribution rule-
cursor cdr is select DISTRIBUTION_RULE from PA_DISTRIBUTION_RULES;
cursor for project status code
cursor cpsc is SELECT PROJECT_STATUS_CODE, PROJECT_STATUS_NAME FROM PA_PROJECT_STATUSES WHERE STATUS_TYPE = 'PROJECT';
cursor for template/created from project id
cursor ccpid is select project_id from pa_projects where template_flag='Y';
BEGIN
select user_id, responsibility_id into v_user_id, v_responsibility_id
from PA_USER_RESP_V
where user_name like 'amit_kumar%'
and responsibility_name like'PA SupervisorS';
-- --Fnd_global.apps_initialize(user_id,resp_id, resp_appl_id);
-- Fnd_global.apps_initialize(v_user_id,v_responsibility_id,275);
-- -------calling global parameters---
pa_interface_utils_pub.set_global_info
p_api_version_number =>v_api_version_number,
p_responsibility_id =>v_responsibility_id,
p_user_id =>v_user_id,
p_msg_count =>v_msg_count,
p_msg_data =>v_msg_data,
p_return_status =>v_return_status
dbms_output.put_line ('Set Global status ->' || v_return_status);
----Cursor for PRODUCT RELATED DATA-----------
FOR REC IN cur_project_in_data LOOP
-----PASSING VALUES TO THE COMPOSITE DATA TYPE(PROJECT_IN_REC_TYPE)-------
----retrieving product code-----
select lookup_code into v_pm_product_code
from pa_lookups
where lookup_type = 'PM_PRODUCT_CODE'
and meaning = 'Oracle Project Manufacturing';
-----retrieving and validating created from project id----
BEGIN
select project_id
into v_CREATED_FROM_PROJECT_ID
from pa_projects_all
where name=rec.created_from_project_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent CREATED_FROM_PROJECT_NAME';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where created_from_project_name = rec.CREATED_FROM_PROJECT_NAME;
END;
-----retrieving & validating carrying out organization id-----
BEGIN
select distinct(CARRYING_OUT_ORGANIZATION_ID)
into v_CARRYING_OUT_ORGANIZATION_ID
from pa_projects_prm_v
where CARRYING_OUT_ORGANIZATION_NAME=rec.carrying_out_organization_name;
EXCEPTION
when others then
O_Retcode := '1';
O_Errbuf :='Incorrent Carrying Out Organization name';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where carrying_out_organization_name = rec.carrying_out_organization_name;
END ;
v_project_in.pm_project_reference := rec.segment1;
v_project_in.project_name := rec.PROJECT_NAME;
v_project_in.created_from_project_id := v_CREATED_FROM_PROJECT_ID;
v_project_in.carrying_out_organization_id := v_CARRYING_OUT_ORGANIZATION_ID;
v_project_in.project_status_code := rec.PROJECT_STATUS_CODE;
v_project_in.description := rec.PROJECT_DESCRIPTION;
v_project_in.start_date := rec.PROJECT_START_DATE;
v_project_in.completion_date := rec.PROJECT_COMPLETION_DATE;
v_project_in.distribution_rule := rec.DISTRIBUTION_RULE;
v_project_in.project_relationship_code := rec.PROJECT_RELATIONSHIP_CODE;
-------------------------Validation of incoming project data--------------------------------
v_error_flag := 1;
project relationship code validation
BEGIN
for prc in cprc
loop
if (rec.PROJECT_RELATIONSHIP_CODE=prc.PROJECT_RELATIONSHIP_CODE) or (rec.PROJECT_RELATIONSHIP_CODE is null)--can be overridden from template
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project distribution rule validation
BEGIN
for dr in cdr
loop
if (rec.DISTRIBUTION_RULE=dr.DISTRIBUTION_RULE) or (rec.DISTRIBUTION_RULE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
project status code validation
BEGIN
for sc in cpsc
loop
if (rec.PROJECT_STATUS_CODE=sc.PROJECT_STATUS_CODE) or (rec.PROJECT_STATUS_CODE is null) null since the value can be taken from template too
then
v_error_flag :=0;
else null;
end if;
end loop;
END;
dbms_output.put_line ('Error at PROJECT_STATUS_CODE>' ||v_error_flag);
validation logic for project start date
BEGIN
if TRUNC(rec.PROJECT_START_DATE) >= TRUNC(rec.PROJECT_COMPLETION_DATE)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project start date cannnot be greater than completion date';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
END;
validation logic for project completion date
BEGIN
if (TRUNC(rec.PROJECT_COMPLETION_DATE)<=TRUNC(rec.PROJECT_START_DATE))
then
if ( rec.PROJECT_STATUS_CODE='CLOSED' and rec.PROJECT_COMPLETION_DATE>sysdate)
THEN
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='completion date cannot be greater than sysdate for closed projects';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
END IF;
v_error_flag := 1;
O_Retcode := '1';
O_Errbuf :='Project closed date cannot be less than start date';
end if;
END;
--------Update staging table for the error records--------
BEGIN
if v_error_flag =1
then
O_Retcode := '1';
O_Errbuf :='Incorrect project relationship code';
Fnd_File.Put_Line (Fnd_File.LOG, O_Errbuf);
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET ERROR_FLAG ='1' ,last_updation_date='sysdate' where PROJECT_RELATIONSHIP_CODE = rec.PROJECT_RELATIONSHIP_CODE;
end if;
END;
-----------------------End of validation of incoming project data----------------------------------
---------------Project Task DATA-----------------
v_a:=0;
FOR tsk IN cur_task_in_data LOOP
v_tasks_in_rec.pm_task_reference :=tsk.task_reference ;
v_tasks_in_rec.task_name :=tsk.task_name;
v_tasks_in_rec.pm_parent_task_reference :=tsk.parent_task_reference ;
v_tasks_in_rec.task_start_date :=tsk.task_start_date ;
v_tasks_in_rec.task_completion_date :=tsk.task_completion_date ;
v_tasks_in(v_a) := v_tasks_in_rec;
v_a:=v_a+1;
end loop;
---------------end of task details------------------
--INIT_CREATE_PROJECT
pa_project_pub.init_project;
---------------------CREATE_PROJECT--------------------------
pa_project_pub.create_project(
p_api_version_number=> v_api_version_number,
p_commit => v_commit,
p_init_msg_list => v_init_msg_list,
p_msg_count => v_msg_count,
p_msg_data => v_msg_data,
p_return_status => v_return_status,
p_workflow_started => v_workflow_started,
p_pm_product_code => v_pm_product_code,
p_project_in => v_project_in,
p_project_out => v_project_out,
p_key_members => v_key_members,
p_class_categories => v_class_categories,
p_tasks_in => v_tasks_in,
p_tasks_out => v_tasks_out);
if v_return_status = 'S'
then
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Success' where segment1 = v_project_out.pa_project_number; ---P->pending & S-> Success
dbms_output.put_line('New Project Id: ' || v_project_out.pa_project_id);
dbms_output.put_line('New Project Number: ' || v_project_out.pa_project_number);
else
UPDATE XXPA.XXPA_PROJECT_IN_STG
SET INTERFACE_STATUS ='Pending' where segment1 = v_project_out.pa_project_number;
raise API_ERROR;
end if;
END LOOP;
Commit;
------Handling Exception--------
EXCEPTION
WHEN api_error THEN
dbms_output.put_line('An error occured during project creation');
IF (v_msg_count > 0 ) THEN
FOR i IN 1..v_msg_count LOOP
apps.PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_encoded => 'F',
p_msg_index => i,
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message v_data ->'||v_data);
dbms_output.put_line('Error message v_msg_data ->'||v_msg_data);
dbms_output.put_line('Error message v_msg_index_out ->'||v_msg_index_out);
dbms_output.put_line('Error message p_msg_index ->'||i);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
WHEN OTHERS THEN
dbms_output.put_line('An error occured during conversion, SQLCODE ->'|| SQLERRM);
IF (v_msg_count >=1 ) THEN
FOR i IN 1..v_msg_count LOOP
PA_INTERFACE_UTILS_PUB.get_messages(
p_msg_count => v_msg_count,
p_msg_index => i,
p_encoded => 'F',
p_msg_data => v_msg_data,
p_data => v_data,
p_msg_index_out => v_msg_index_out);
dbms_output.put_line('Error message ->'||v_data);
APPS.fnd_file.put_line(APPS.FND_FILE.LOG,v_data);
END LOOP;
END IF;
end; --end procedure
END xxpa_proj_conv_pkg;
* Please tell me how to assign project specific task with the newly created projects??? *
Also please tell me how to assign multiple * Project_Relationship_Code * (ex: END CLIENT, GENERAL CONTRACTOR, PRIMARY) for a particular project during project creation?

Are you not storing the project number in the staging table designed for storing the task data? You can use create_project API to create the project and tasks at the same time with one single call. You may want to try that option

How can I filter or block foreign language emails or email addresses

How can I filter or block foreign language emails or email addresses??
TIA
C

Most email clients have a provision to create a 'rule'. The rule examines the email as it is received. In generally you can search for specifically senders, recipients,subjects, or specific content words in the body. Based upon the findings of the rule, you can do something with the email (such as end it directly to the Trash).
For example if you know where all of valid you emails come from, you can create a rule that checks the from field for an acceptable sender and sends those email's that to the inbox, while sending all emails from other senders to the trash or spam folder
Keeping out foreign language emails is often difficult because because often it is difficult to come up with a rule that will catch them on the basis of language they are written in.
There are also commercial products that can scan incoming email and 'score' the email based upon content, and you decide at what 'score' you want the mail sent straight to the trash or spam folder. Verizon's spam filter does this based upon Verizon's scoring system, and actually does catch a lot of spam. It also occaisonally catches things that are not spam however....
Hope that is helpful

How to assign particular concurrent requests to sparate concurrent managers

How to assign particular Users concurrent requests to custom or Sparate concurrent managers
OS : Linux
Apps: 11.5.10.2

Hi,
This can be done via "Specialization Rules".
How to Create a Custom Concurrent Manager [ID 170524.1
How to Split the Load of Work to Many Concurent Managers [ID 473310.1]
Oracle Applications System Administrator's Guide - Configuration (zipped) -- Page 7-14
http://download.oracle.com/docs/cd/B25516_18/current/acrobat/115sacg.zip
Make sure you bounce the CM once you are done.
Thanks,
Hussein

How to define Substitution rule for Businee area

Hi experts,
Could you please guide me to define substitution rule for Business are.
Below is the requiremnt :
I want to assign different business area for this cost centre.
While posting document in FB01, we are entering cost centre in line itme. Businee area is picking from cost centre master.
Example : Cost centre 11310 and businee area Y020.
Businee area Y020 is picking from cost centre 11310 while posting document.
I want to assign different business area for this cost centre.
For that I want to define substitution rule.
I have defined substitution rule and activated in comapany code but it is not working. Please guide me how to define Substitution rule for the same.
I have defined prerequisit as Comapny code = 2053 and Cost centre =11310 and transaction code = FB01 then
Substitute business area with Y045.
It is not working .
Please guide me where I did mistake and how to rectify the same.
Thanks in advance for your quick response and points will also assign for helpfull answer.
Regards,
Amar

Hi Paul,
Thaks for your reply.
Yes, you are correct. SAP is changing this back to BA from Cost centre.
Why can't we use Substitition for the above issue.
Then what is solution for my issue.Please suggest any alternative solution.
Thanks in advance for your help.
Regards,
Amar.

HOW TO ADD BUSINESS RULES

HI EVERY ONE,
I HAVE A REQUIREMENT WORKING ON MM , I HAVE SOME BUSINESS RULES IN FUNCTIONAL DESIGN DOCUMENT AND I NEED TO WRITE THE TECH DESIGN . MY QUESTION IS HOW TO ADD BUSINESS RULES IN TECH SPEC. EXAMPLE I HAVE FINAL DUE DATE AS BUSINESS RULE i.e,
Final Due Date = Baseline Date + Maximum Day Term
If Clearing Date is = Final Due Date = Invoice is Paid-On Time
If Clearing Date is < Final Due Date = Invoice is Paid Early.
If Clearing Date is > Final Due Date = Invoice is Paid Late
I have the data available for Final Due date from R3 .
So after creating the Info Object( characteristic), where can I add this formula for that Z INFO OBJECT ? I have total of 5 business rules like this in my funtional doc
Help will be appreciated . Points will be assigned if my problem solved...
thanks

Hi Harish,
With the assumptions:
1. You are using a BI 2004s system
2. The fields Baseline Date, Clearing Date & Maximum Day Term are being sourced from R/3
The rules can be coded into the End Routine in the Transformation.
If you are using a BW 3.x system, this logic can be coded in the Start Routine at the Transfer Rules or the Start Routine at the Update Rules.
Hope this helps.
Regards,
Shrikant

How to assign concurrent program to concurrent manager

Hi:
How to assign concurrent program to concurrent manager? or the other way around. It was an interview question. for R12 or 11i
Thanks

Srini Chavali wrote:
All concurrent programs, by default, will be run thru the Standard Manager. If you need to have a specific manager run a program, you need to define specialization rules (in Concurrent > Manager > Define, "Specialization Rules" button) for that manager.
http://docs.oracle.com/cd/E18727_01/doc.121/e12893/T174296T174302.htm#fndcpdcq.QUEUE_CONTENT
And that's exactly what is mentioned in the docs referenced in my previous reply.
Thanks,
Hussein

How to assign BP to BP?

Dear all,
I created a organization model having a ornganization unit (Marketing Div)
Now i assigned Marketing Manager (Mr XXX) to the Organization unit.
now i have two employees under marketing manager in same organization unit.
Can any body guide me how can assign employee(Sale Exes)to the marketing manager??
Regards
jayesh

Hi Jayesh
You cannot maintain Employee hierarchy in CRM, but you can maintain only different positions at different levels. When you assign emplyees to a position, the employees will have a User id assigned to them which will determine who is what (referring to HR structure)
My suggestion is create different positions at the same level of organizational unit, that doesnt mean one is superior/ subordinate than other (Unless you have different Org Hierarchies)
But if you have a situation where you will have to use employee hierarchy (example:" workflows) you will have to assign more attributes at each position like approval amounts or any other differentiation rules in which case again it has to refer to HR structure by thier ID's given in the BP record
Hope this helps

Assign notification rule to others

Hi,
As sysman in 11g OEM, I would like to assign a public rule to other DBA on my team.
Is that possible or each user in OEM has to assign the rule to themselves?
Has anyone come across this issue?

Hi
I am writing a code to setUserMembershipRule where I have to set the parameters, roleKey and the object SearchRule, but i dont understand how write this SearchRule.
When I import oracle.iam.platform.entitymgr.vo.SearchRule the object SearchRule were not found, exist only SeachCriteria.
Can help me ?
Tks

How to assign a user and position to a release code .

How to assign a user and position to a release code ?
I tried in SU01 but the data is not getting reflected in the table
T16FW. from where the rule (20000026) is picking the user .
is there a transaction to do so ?
Thanks in advance .

These are done in SPRO. Search for release in SPRO, you will find your answer.
Regards, IA

Assign Sourcing Rule API

Hi All,
I have to migrate ASR (Assign Sourcing Rules) in 11.5.10 instance.
Does anyone know what API is available to do this.
We can find ASR in EBS on following path:
Supply Chain (Responsibility) -> Sourcing -> Assign Sourcing Rule
Thanks in advance...
Thanks,
Swapnesh Parmar

Hi Swapnesh,
I have a similar requirement to load the Sourcing rules and attach the assignment sets to the sourcing rules.
I did a test and was able to load a single record using MRP_SOURCING_RULE_PUB and how to attach the assignment set?? i want to know how to use MRP_SRC_ASSIGNMENT_PUB.
As you are already aware, can you please let me know. If possible can you please email the code to my email id [email protected]
Thanks,
Raghav

How can I filter a Sharepoint 2007 libarry list based on current user login?

Hi all.
I would like to know how I can filter a SharePoint library list based on current user login.
Suppose I have created the followings:
1) A SharePoint form library containing bunch of uploaded InfoPath form data.
2) The InfoPath form template contains a promoted text field called "TargetUser" to store user domain login (ex: DOMAIN\JOE) and every InfoPath form file in the library has a valid domain name stored in the "TargetUser" field.
I have created a custom view for the form library and would like to filter this view so only items whose "TargetUser" field matches current user's login ID are displayed.
I went to Edit View page to customize the view and tried to use the [Me] function but I got a "Filter value is not a valid text string" message instead when clicking OK. Apparently [Me] returns a Person/Group data type and the filter cannot compare its value
to that of "TargetUser".
I tried using text functions (ex: TEXT([Me],"") hoping to extract default string value from [Me]. The filter accepts the parameter without any error but the resulting fitlered list does not display any items at all.
I have googled this subject for hours but I have not found any solution.
It would be greatly appreciated if anyone can help me to create a functional filtered list.
FYI, my SharePoint 2007 installation is just WSS 3.0 + Form Server. I do not have MOSS 2007 (so no MOSS 2007 web parts or web services).
Thank you.
Jason

Here's what I usually do in order to accomplish this. Ultimately you'll need to have 2 different fields. There's the one you already have, with DOMAIN\username stored in it. Then you'll need an additional field as a "person" column type.
Call it "TargetPerson" or something.
Create a sharepoint designer workflow that runs each time an item is created or changed. One action:
Set FIELD to VALUE.
The first FIELD is "TargetPerson", the VALUE is your "TargetUser" field.
Once this is done, then the person value is stored in the person field. This is the field that you can filter by "TargetPerson" is equal to [Me]
Laura Rogers, MCSE, MCTS
SharePoint911: SharePoint Consulting
Blog: http://www.sharepoint911.com/blogs/laura
Twitter: WonderLaura

How to assign filter rules in SLT

Similar Messages

Maybe you are looking for