How to automate checking status of Replication agent and Replication queue in CQ5

As part of monitoring the status of replication agents and replication queue, is it possible to automate the checking process?
We can check them from GUI, but from a monitoring perspective we are loking for a mechanism where the status can be checked continuously and we are alerted whenever there is some issue.
1. Check status of replication agent (enabled/disabled)
2. Check status of replication queue (if the queue is blocked)
Thanks in advance
nkrao

you can pull the queue from the page the same way the UI gets the list
in the table:
curl -u admin:admin
"http://localhost:4502/etc/replication/agents.author/publish/jcr:content.queue.json?agent=p ublish"
and then use a shell library like ticktick.sh to parse the json
response. A sample of how to get the bundles loaded and installed from
CQ using the ticktick library can be found here
https://github.com/kristopolous/TickTick
http://ruben42.wordpress.com/2012/04/24/using-ticktick-sh-to-parse-json-responses-from-ado be-cq5-5/

Similar Messages

SC still visible in check status even after GR and Invoice

Hello all,
We are on SRM 4.0 SP 4.0.
Normally SCs for which GR and invoice has been done should not be visible in the SC check status application if you dont select the "Include completed shopping carts". TBut in some cases though we have selected the "Delivery Completed" indicator in backend PO but still there are some shopping carts still visible in check status application in SRM. The values for the GR and invoice should have status of "Fully confirmed".
For such shopping carts when i manually run the report BBP_GET_STATUS_2 it replicates the correct status and the SCs disappear from the SC check status application.The BBP_GET_STATUS_2 and the CLEAN_REQREQ_UP programs are scheduled every 5 mins.
Any hints or ideas will be much appreciated.
Best regards,
Sambit

Hi Sambit,
In Check status, in extended search check whether the incuding completed shopping carts check box was checked or not.
If the check box was checked then even the completed shopping carts get displayed.
Please let me know if this is not the case.
Rgds,
Teja

How to automate check of xlScheduler status in 11g

All,
I am trying to automate checking the status of the xlScheduler in OIM 11g. I know I can manually check the status but I want to automatically check the staus and email if not running. Does anyone have a way of doing this?
Thanks,
Chris

In 9X we have written scheduler which run at regular interval checks status and send email accordingly
in same way i think we can do in 11g also if they haven't provided any thing OOB.

How to update check number in general ledger and vendor ledger automatical

Dear All,
i need some clarification in check updation in general ledger and Vendor ledger through the system automatically.
While making vendor payment system will not update check details in vendor ledger and bank GL code.while doing bank reconcilation its very difficult to identify check no and amount for that we have updating manually but its time taking. Is there any program or any enahancement for updating check number in general ledger and vendor ledger.
Kindly suggest me how to update check number . Is there any programm or enahancement for check updation.kindly suggest me.
Thanks in advance
Thanks and Regards
Girish

HI,
If I am understanding correctly what you are wanting is to be able to see the check number for the payment document in both FBL1N and FAGLL03.
Special fields for AP line item reporting can be configured via IMG. Define additional fields for line item display>
Not all fields are available, but this one is. Add this entry, you can also add check encashment date if desired.
PAYR table name.
CHECF Field name
After these fields are saved, they can be selected in the line item layout on FBL1N.
You may also need to reset the ALV buffer using program BALVBUFDEL
Resetting the buffer is only necessary once in each client.
Hope this helps.
Alicia

How I can check status of a database link in runtime?

I need check status of a database link from my application in runtime.
There are any view or table where I can find this information?
Any function or package?
Thanks!!

SQL> create view test_view as select dummy from [email protected]
2 ;
View created.
SQL> select dummy from test_view;
D
X
Execution Plan
0 SELECT STATEMENT (REMOTE) Optimizer=CHOOSE
1 0 TABLE ACCESS (FULL) OF 'DUAL' FIRST9.XXXX.COM
Statistics
7 recursive calls
4 db block gets
2 consistent gets
0 physical reads
212 redo size
363 bytes sent via SQL*Net to client
425 bytes received via SQL*Net from client
2 SQL*Net roundtrips to/from client
0 sorts (memory)
0 sorts (disk)
1 rows processed
NOW WE PULL OUT THE NETWORK CABLE connecting the two servers.
SQL> select dummy from test_view;
select dummy from test_view
ERROR at line 1:
ORA-02068: following severe error from FIRST9.XXXX.COM
ORA-03113: end-of-file on communication channel
So all you have to do is to test for the communications error.

How to take check print out for self and in favour of Bank for DD payment

HI
I have a requirement to take check print out for self and in favour of Bank for DD payment from AP module, how it is possible.
Syam

hi syam,
Step 1: Create a down payment request: F-47
Step 3: Make payment through : F-58
While entering the input parameters, Enter amount: 1050,
For 50 Rs, you take Bank Charges account through GL Fast entry.
Account Entry
Vendor Dr (Spl GL): 1000
Bank Charges Dr 50
SBI Cheque Issue clearing Account Cr 1050
Regards,
Ramakrishna

When I install a host agent on my OEM 12c the status of the agent and host target in the OEM is stuck in pending. The agent is up and can ping the OMS. I haven't been able to locate any relevant errors in the logs

Sum
General
Upload Metric Data
Status
Status Pending
Availability (%)
Unavailable
Host
Version
Platform
Operating System
Operating System Agent Username
Unavailable
Interaction with Management Service
Upload to
Unavailable
Last Successful Upload
Unavailable
Agent to Management Service Response Time (ms)
Unavailable
Agent Upload Interval (minutes)
15
Detailed Status
Restarts (last 24 hours)
0
Secure
Unavailable
Agent Collecting
Unavailable
Agent Backed Off
No
Agent Purging Data
Unavailable
Above is the display from the agent page on the OEM console.
I have also checked the agents page and confirmed that the agent is not Blacked Out.

Hi Krishnan,
emctl unsecure agent fails with the error:
[15-04-2015 16:28:19] USERINFO ::Checking Agent for HTTP...
[15-04-2015 16:28:19] USERINFO ::   Done.
[15-04-2015 16:28:24] USERINFO ::Agent is already stopped...   Done.
[15-04-2015 16:28:24] USERINFO ::Unsecuring agent...   Started.
-115-04-15 16:28:25,294 [main] INFO agent.SecureAgentCmd openPage.871 - Opening: https://usatl-w-cmcloud.americas.abb.com:1159/empbs/genwallet
2015-04-15 16:28:29,521 [main] INFO agent.SecureAgentCmd openPage.897 - Response Status Code: 200
2015-04-15 16:28:29,523 [main] INFO agent.SecureAgentCmd openPage.905 - RESPONSE_STATUS header: OK
2015-04-15 16:28:29,525 [main] INFO agent.SecureAgentCmd openPage.906 - Response body: -1
2015-04-15 16:28:30,311 [main] INFO agent.SecureAgentCmd openPage.871 - Opening: https://usatl-w-cmcloud.americas.abb.com:1159/empbs/genwallet
2015-04-15 16:28:32,258 [main] INFO agent.SecureAgentCmd openPage.897 - Response Status Code: 200
2015-04-15 16:28:32,261 [main] INFO agent.SecureAgentCmd openPage.905 - RESPONSE_STATUS header: OK
2015-04-15 16:28:32,262 [main] INFO agent.SecureAgentCmd openPage.906 - Response body: -1
[15-04-2015 16:28:32] USERINFO ::OMS is locked. Cannot unsecure the Agent.
[15-04-2015 16:28:32] USERINFO ::Unsecuring Agent... Failed.
The OMS is on a Windows 7 VM. Do you know the command to unlock the OMS?
Thanks,
Jerald

How to manage coexistance of IIS policy agent and sun-passthrough from AS

We have an ISS 6 with Policy Agent 2.2 and on same instance we have the sun-passthrough plugin installed to redirect certain pages to an Application mounted on Sun App Server 8,2. We need to apply policies to requests to those pages before redirection is done but seams that passthrough plugin is taking precedence over Policy Agent. Therefore, policies are not evaluated and all traffic is passed. PA agent is installed as a wild card and passthrough as an ISAPI filter. We do not see a way to change priority (already set to HIGH) for the passthrough plugin. PA has the option on amAgent.properties and we set it allready to HIGH. Any hint?
Edited by: blancay on Sep 20, 2008 9:47 AM

1) How to restrict the new employee from availing any type of leave company have a policy only after completion of probation employee can avail sick leave?
Note 897623 User Exits in PT
Use user exit to check It0019 or monitoring of tasks or reminder of dates or 0041 IT
2) Sick leaves can be availed only after completion of 1 year wht are the settings do i need to set?
You can use quota deduction and user exit and read dates from 0041 for his entry date in company
3) Earned leaves can be given to employees those who complete 2 years of service? what are the settings for this?
base entitlement ie seniority quota check table v_t559l
4) Intervening holidays and weekly offs can be treated as leaves in sick leave as well as earned leaves what are the customizing settings for this?
counting rule and exit
5) only female employees are entitled to avail maternity leave?what are the settings for this?
feature pe03 MASEX Set Infotype 80 Admissability for Employees
read more on help.sap.com

How to automate the loading of Correspondence attachment and templates

Under the "*Administration - Document*" screen, in our application ( version 8.0.0.3 Public Sector ) , we have 4 tabs / views , they are "*Correspondence Attachments*", "*Case Attachments*", "*Correspondence Templates*" and "*Literature*". We are going to have at least 3000 of these files that are needed to be loaded into each of this view. Is there a way to automate the process of the bulk loading of these documents / files into Siebel ( The Siebel operation performed could be Insert , Update or Delete ).
Your help is really appreciated.
Thanks
S

"2. To avoid the above painful process as an ongoing task, setup the document server for
handling this more smoothly. Refer Correspondence, Proposals, and Presentations Guide."
We do have document server component up and running. But if we have 3000 templates that need to do loaded into Siebel , how can document server would help in this sense without having someone to manually creating a new Correspondence Template record ? I am looking for an automated process that can be reused repeatedly.

How to automate the alias between Windows AD and SAP accounts

I have authentication working where I can logon via SSO with Windows AD authentication and still get to SAP BW via SAP SNC. In getting this to work I had to manually create an alias between the Windows AD account and th SAP Account. We will have thousands of users in our Business Objects environment with users coming and going each day. I have not found a way to automate the creation of the alias. There must be some way to do this, since this seems like it would be a common need for customers that want to access both SAP and non SAP resources in Business Objects. Has anyone found a way to automate the creation of the aliases? Our user ids are the same in Windows AD and SAP, so it doesn't seem like this should be that difficult, but I can't figure this out.

Thanks for the response. That was helpful. I had seen something similar is SAP Note 1269228, but that note did not mention the registry key setting. These seems like a fairly common request. Is built in support for this planned in XI 3.2 or XI 4? The reason I ask about the feature being included in future releases, is because we may hold off on taking the time to develop a script if this is soon to be part of the software.
Also, if anyone has already created a script to do this, I would be inteterested in knowing how you scripted this. How do you handle adds/removes of either SAP Authentication or Windows AD Authentication for a user? How do you handle adds or deletes of whole users?

How to automatically populate text boxes from dropdown and tick box options and then sum the results

Firstly I need to say that I have no knowledge of how to use Javascript.
I am using the 30 day trial of Adobe Acrobat XP Pro to see if it can be used for a Membership Application Form for the 1st year of membership. This 1st year has a pro-rata membership fee per month left in the year of application along with a pro-rata postage fee for non-UK members. All of the input will be via basic text boxes with the exception of the application date and overseas postage for which I have created 3 dropdown boxes, one for Day, one for Month and one forYear and for the 2 tick boxes which are there for the applicant to say if they want 2 other options which have a cost attached to them. I want to populate 2 text boxes from the Month lookup. One of these is for the pro-rata membership fee and the other for the pro-rata overseas postage. The other 2 optional items will be text boxes populated from the tick boxes. Having populated these 4 text boxes I then want to have them automatically summed to give the total to be sent by the applicant.
I have searched many forums and tried many of the suggested ways of doing it and none of the 4 text boxes are populated.
Are you able to help me with this?
Many thanks

The script solution provided is a "custom calculation JavaScript" not a "simplified field notation".
The comment at the top of the code:
// Custom calculate script for text field
should help clarify the placement location for the code.
Simplified field notation has a number of specific restrictions. One is that the provided data must be numeric data only.

How do I check what java I have and then how dow I download the newest version?

'''I signed up for wwe.com for my birthday and Christmas present to myself. There were some problems with the how it ran so I had to secure the services of OMNITECH (who I would never recommend to anyone again as I am finding out things have been removed and messed with and I'm left holding the bag.) Anyways I am looking for help with how to find what version of Java I have and and the how to install the latest version of Java. That is, if I really need it. I'm not sure to even check how I would know if I use it. Maybe I don't even need it.
'''

'''[http://www.java.com/en/download/manual.jsp Java Downloads for All Operating Systems]'''
'''[http://java.com/en/download/installed.jsp Verify Java and Find Out-of-Date Versions]''' {web link}

How do you check what your user ID and password is?

hey, anyone know how for me to find out my user id and password? I need them to start up my mail account and to download a program. I called apple but they said to either ask here or I'd have to extend my phone support, and thats too expensive for me right now, so I'm hoping somone here can tell me, thank you.
~Cole

If you are accessing a mail account provided by your ISP, you should have been given an opportunity to set these when you signed up; if not, contact the ISP. If you are accessing a different email account, use the name or email address and password that you used when you signed up for it.
If you are prompted for a password before installing an application or in the Finder, provide the username and password you used when you initially set up the computer.
(17368)

How to automate the execution of several programs and use their output

Dear java members,
I am trying to figure out how to get data from a file, database, or program and use that information in another program. Can you help please?
I have looked through several texts and while the information is there somewhere I have not found the specific capabilities or examples that explain how to do this.
I want to learn how to do this with objects.
The specific applications I am working with are the GIS (Geographic Information System) suite of ESRI products such as ArcInfo and ArcView.
I am working with simulators for hydrologeology (ground water) and other geophysical phenomenae. Programs for decisions and assessment of probability such as found in geostatistical analyses packages. Drawing programs and data manipulation programs such as spreadsheets in windows and scripting languages found in most Unix packages.
I want to be proprietary platform free! I want to be accessing apps and or data wherever they are and in whichever form they are in or best used.
Web techniques and protocols are where I think most of my effort will be focused.
One of the mediums (media) that I expect to use a lot is XML.
If I can find a simplified (generalized) explanation how this is done and how the parts fit together through and or with objects. If I can find references to texts and examples I will be very appreciative and very much less confused.
I am interested in using the Java programming language.
Thank you
ctavares1

Hello Tavares,
What you seek can be done, but before that you must know from where you want to take the data. In what form you will get the data in and where you want to use it and how.
Your problem is what we call an architectural issue. If possible please write to me at [email protected]
With the above information - I shall be able to help you to some extent.
Ironluca

Checking status of remote IP and port

Hi,
I want to check the whether DatagramSocket is listening on the remote PC(intranet) on a specified port. Can somebody give me some idea to check this?
Thanking you,
Shan

Send it some data. If there's no listener you will get an error. You could try sending an empty datagram if your application protocol doesn't have some sort of PING or ECHO command, which IMHO it should have ...

How to automate checking status of Replication agent and Replication queue in CQ5

Similar Messages

Maybe you are looking for