How to automatically load function parameters when editing c/c++ DLL call?

I built a DLL in CVI and is used in TestStand, I want this DLL to have the ability to automatically load function parameters after specifying Module pathname and function name in "Edit C/C++ DLL Call" dialog? How can I do it?

Staring with CVI 7.1 and TestStand 3.1 you do not need a type library for TestStand to load parameters automatically. Just make sure you declare your exported functions with the __declspec(dllexport) modifier as in the following code:
__declspec(dllexport) void fun(void)

Similar Messages

  • How do you add a Comment when editing document in Word for ipad?

    How do you add a Comment when editing a document in Word for ipad. I've subscribed to Office, so have full editing functions. Can Track changes etc in Review, but can't see how to add a marginal Comment.

    Comments, like they are in Numbers for OS X, are not really supported in iOS. Normally, they rely on a mouse-over to read them. Since there is no mouse on the iPad, it stands to reason they are not there.
    I believe Eric Ross's comments is more geared towards used said Numbers docs on iWork.com.

  • How do I  load a document to edit it?

    How do I load a document to edit it?

    Check out our FAQ: Getting Started with ExportPDF
    If you have any questions, please let us know and we'll try to help!
    -David

  • When I get an call the phone switches automatically to speaker phone when I pick up the call

    When I get an call the phone switches automatically to speaker phone when I pick up the call.
    I then have to press the handset button to get out of the speaker phone mode.
    How do I set it to goto the handset automatically.
    I have the most up-to date software and I have pulled that battery.

    That's just what happens when you do a battery pull. If your phone is turned OFF, the cache is not accessible. As you're probably aware, anytime any electronic device is acting up (PC, printer, modem, etc.), unplugging it will correct many issues; it's the same with your phone.
    I can't offer a really technical explanation, just trust me on this one and remove your battery while your phone is ON.
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Automatically load web page when select topic

    I've been able to perform this functionality in RoboHelp (winhelp), but have not yet figured out how to do this in RoboHTML.
    Upon topic load I would like a web page to display within the topic pane. In RoboHelp, I did this by creating a html jump from the topic heading. It looked like this:
    JumpHtml(`http://www.cerner.com')
    Does anyone know how to do this in RoboHTML? It doesn't seem that I'm able to format the topic heading to automatically load a web page when the topic loads.

    Hi there
    Configure the topic as a redirect.
    Check out my Tips and Tricks file for info on how to redirect.
    http://www.robowizard.com
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • How can I change Connection parameters when promoting to Production ???

    Hi Everyone !
    Do you know how can I change Connection Framework parameters in a Webdynpro Application? The app was deployed in TEST, now I want to move it to Production...
    In my application I am using Connection Framework to connecto to a BAPI.
    The connection was created using
    SAP Connectivity > SAP Enterprise Connector.
    I provided connection parameters for a TEST environment (Host name, system number, client, logon name...).
    I deployed the application in TEST, but how can I change these parameters prior to promote it to Production? Were and how do I fill the new parameter values?
    Many Thanks,
    Silvio Hirashiki

    Hi Silvio,
    AFAIK, you need to provide JCO connection to proxy port type and all connection specific data is there. (http://help.sap.com/saphelp_nw04/helpdata/en/ed/897483ea5011d6b2e800508b6b8a93/frameset.htm). You can use configuration files for this or RFC destination.
    You only need to regenerate proxy when interfaces of functional modules are dufferent for TEST and Production.
    BTW, why are you using SAP EC instead of adaptive RFC model in WD application?
    Best regards, Maksim Rashchynski.

  • How to maintain good photo resolution when editing

    when editing with photographs does anyone a trick on how to keep it at it's highest resolution for output to HiDef DVD

    Start with a High Definition codec such as DVCProHD and keep it there from output to encoding.
    BTW, what HD player are you going to play it on?

  • How to automatically stop a Midlet when calling platformRequest(url)?

    I want to automatically exit my Midlet when calling platformRequest(url).
    So, I have tried the following ways, but the Midlet is still running after calling platformRequest().
    platformRequest(url);
    destroyApp(true);
    The Midlet is likely to be re-invoked by AMS.
    Can anyone help me?
    Thanks,

    PS. The question above is in J2ME.

  • Why is the Tick Count function slow when used with a .dll but fine with normal lab view code?

    when using the Tick Count millisecond timer with a .dll I've written in C, I'm getting some odd timing issues.
    When I code the function I want (I'll explain it below in case it helps) in LV and run it as a subVI, feeding it the Tick count as an argument, the function runs quickly, but not quite as quickly as I would like. When I feed this same subVI just an integer constant rather than the Tick Count, it takes about the same amount of time, maybe a tiny bit more on average.
    When I bring in my function from a .dll, however, I start to run into problems. When I feed my function an integer constant, it is much faster than my subVI written in LV. When I feel my .dll the Tick Count, however, it slows down tremendously. I'm including a table with the times below:
                 |  Clock   |   Constant   |
    SubVi:   | 450ms  |  465ms       |
    .dll         | 4900ms|  75ms         |
    This is running the function 100,000 times. The function basically shifts the contents of a 2-dimensional array one place. For this function, it probably won't be a huge deal for me, but I plan on moving some of my other code out of LV and into C to speed it up, so I'd really like to figure this out.
    Thanks,
    Aaron

    Hi Aaron,
    Thanks for posting the code -- that made things a lot clearer for me. I believe I know what's going on here, and the good news is that it's easy to correct! (You shouldn't apologize for this though, as even an experienced LabVIEW programmer could run into a similar situation.) Let me explain...
    When you set your Call Library Function Node to run in the UI Thread you're telling LabVIEW that your DLL is not Thread-safe -- this means that under no circumstances should the DLL be called from more than one place at a time. Since LabVIEW itself is inherently multithreaded the way to work with a "thread-unsafe" DLL is to run it in a dedicated thread -- in this case, the UI thread. This safety comes at a price, however, as your program will have to constantly thread-swap to call the DLL and then execute block diagram code. This thread-swapping can come with a performance hit, which is what you're seeing in your application.
    The reason your "MSTick fine behavior.vi" works is that it isn't swapping threads with each iteration of the for loop -- same with the "MSTick bad behavior.vi" without the Tick Count function. When you introduce the Tick Count Function in the for loop, LabVIEW now has to swap threads every single iteration -- this is where your performance issues originate. In fact, you could reproduce the same behavior with any function (not just TIck Count) or any DLL. You could even make your "MSTick fine behavior.vi" misbehave by placing a control property node in the for loop. (Property nodes are also executed in the UI thread).
    So what's the solution? If your DLL is thread-safe, configure the call library function node to be "reentrant." You should see a pretty drastic reduction in the amount of time it takes your code to execute. In general, you can tell if your DLL is thread-safe when:
    The code is thread safe when it does not store any global data, such as global variables, files on disk, and so on.
    The code is thread safe when it does not access any hardware. In other words, the code does not contain register-level programming.
    The code is thread safe when it does not make any calls to any functions, shared libraries, or drivers that are not thread safe.
    The code is thread safe when it uses semaphores or mutexes to protect access to global resources.
    The code is thread safe when it is called by only one non-reentrant VI.
    There are also a few documents on the website that you may want to take a look at, if you want some more details on this:
    Configuring the Call Library Function Node
    An Overview of Accessing DLLs or Shared Libraries from LabVIEW
    VI Execution Speed
    I hope this helps clear-up some confusion -- best of luck with your application!
    Charlie S.
    Visit ni.com/gettingstarted for step-by-step help in setting up your system

  • How do I stop Safari from automatically loading a URL when I start typing the first few letters in the URL/search bar?

    My question concerns a bug (or feature, I'm not sure which) that I've been seeing for some time on my Safari installations.
    I'm running Lion (the latest patched version) with Safari (ditto). I've noticed that every so often, if I open a new tab and start typing something in the search/URL bar, Safari will not only suggest something based on my history, but will actually begin loading the page as though I had accepted that suggestion.
    For example, today, I typed the letter "b" in the search/URL bar, paused for a few seconds while I was thinking of what to type next, and Safari went ahead and loaded "bugzilla.gnome.org" based on that being the last URL starting with "b" that I happened to have gone to. And the same thing has happened to me on earlier occasions with different web sites. In other words, it's not merely giving me a suggestion, it then proceeds as though I had accepted that suggestion. Sometimes it might happen to be right, but it's the principle of the thing.
    Needless to say, I hadn't inadvertently bumped the Enter key.
    Of course, ordinarily, Safari will just offer a list of suggestions based on my bookmarks and browsing history, maybe filling out the URL bar with the topmost suggestion (while giving me the option of overtyping it if I wish). And, of course, this happens without fail if I've just had Safari preempt me by loading a page and am trying to find out why. Like the best Heisenbugs, this "feature" goes away as soon as I make a concerted attempt to study it.
    I have completely disabled AutoFill in the Preferences dialog. I would clear the cache and history, except that I kind of resent having to do that every time (or turn on private browsing, possibly another option) just to stop the computer from executing an instruction that I haven't even finished giving it yet (and in many cases intend to change).
    Has anyone else seen or been able to disable this feature?

  • How to automatically open selected docs when turn on computer?

    How to open automatically selected docs when turn on computer? (Text Edit docs particularly, and others)
    I wist not that I must tediously select and open my same usual documents one by one, each time I turn on computer to work.
    I either have to find my usual documents under "File/OpenRecent"
    &/or search through the FINDER for them.
    I wonder if anybody else has every had this problem before, and found a solution?
    Has modern technology advanced to the point where this can be done automatically?
    (Now it just occurred to me that
    I could put my 'usual documents' (or Alias) into a separate Envelope
    in the finder, and
    then select them all at once and click to Open all at the same time.
    But is that the best or only solution?)
    There's a grateful thank you, two (2) "Helpful's", and 1 "Solver" award to be given out. Good luck.

    Cool. Coolidge, indeed. So wise.
    You ARE "THE SOLVER"
    & entitled to all the rights and privileges accorded therein.
    Sincere Thank yous, also,
    oh, and Kudos to you.

  • How do I load new songs when my ipod was loaded by somone else itune acct. I have my own account and dont want to lose what I have loaded on it

    I have an ipod, 4 g, my girlfriend loaded it with 700 songs but she is no longer a girlfriend and I signed up to my own itune account and want to load new songs, how can i save whats on there and also create my own data base of songs,  i dont want to lose anything on the ipod

    It sounds like you definitely want to turn off the  auto-sync before you hook your iPod up to the computer
         To turn off Auto-sync:
        1) open iTunes
        2) Preferences -> Devices -> check the box that says "Prevent iPods from syncing automatically
    That way you can manually add songs to your iPod (using iTunes) without your iPod removing the songs on it

  • How To Automatically Create Planned Orders When Sales Order Is Saved

    I have a MTO sceanrio where we need to create planned orders when sales orders are saved without running MRP.
    I have the Planning Strategy Group set to 81 in the material master, but it didnt create the planned orders.
    Could you tell me other settings I should review to make the planned orders create automatically?

    Tony,
    At the "Requir. Classes" (OVZG) customizing screen, field "Automatic start of make-to-order in background mode" affects the automatic planning. See fields help doc. below.
        If you select this indicator, the system automatically carries out
        single-item, multi-level planning for a sales order if a sales order
        item is either created or changed.
        This function can only be used for make-to-order production.
    So check out the Req. Cl that yr Req. type (req. type is part of a strategy).
    BR,
    Elly

  • How to not create Lightroom duplicate when editing in Photoshop

    When I choose to Edit in Photoshop from within Lightroom 3, the edited copy is added to Lightroom. This might sometimes be useful, but I want to choose whether or not the edited copy is added to lightroom.
    How can I make this choice?
    David

    That's not my experience - maybe I've got some setting wrong somewhere.
    I have two categories of images in Lightroom: DNG files originating from digital camera Raw files, and files which are PSD that were scanned from old photos.
    Opening the DNG files in Photoshop then selecting "Save As" does not make the duplicate in Lightroom PROVIDED I have "As a copy" checked. But then the copy is not the file that's currently open so I have go find the copy and open it to do any work on it.
    Opening PSD files from Lightroom in Photoshop, the duplicate is created immediately the file opens in Photoshop unless I select the "Edit original" option. But even then, if I subsequently use Save As within Photoshop, the copy appears in Lightroom.
    My version of Lighrtoom is 3.4.1
    My version of Photoshop is CS5.1
    I'm on a Mac running Snow Leopard

  • How to automatically reprice sales order when value = $5000 ?

    When the value of my sales order reaches $5000, I want to automatically reprice it at lesser prices.
    -I have the higher and lower prices for each material. Do I set those up as value scales (vs. quantity)?
    -How can I look at the value of the whole order - header condition? - and then reprice it when it hits $5000 ?
    -Can this be automatically done or do I have to manually reprice the order?
    Thanks for any suggestions.

    If the sale order will have only one line item, then straight away, your requirement can be met by adding this logic in your existing routine of copy control.  On the other hand, if it contains multiple line items, then, I dont think, it will be an easy task.
    Nevertheless, you can try with any of the following sale order user exits.
    a)  User exits in the program MV45AFZZ - USEREXIT_PRICING_PREPARE_TKOMK  (for header level check)
    b)  User exits in the program MV45AFZZ  - USEREXIT_PRICING_PREPARE_TKOMP (for item level check)
    thanks
    G. Lakshmipathi

Maybe you are looking for