How to automatically run scripts before/after scheduled backup?

Hi, I want to run some scripts (automatically) before and after a scheduled filesystem backup using oracle secure backup. is it posible?
thanks in advance

I've see it: using "after backup" and "before backup" in the dataset definition.
forget this thread...

Similar Messages

How to automate running scripts.

Moved from another forum.
I want to run the following commands on a weekly basis with the Windows Scheduler:
sqlplus / as sysdba
alter database flashback off;
rman target=/
delete noprompt archivelog all;
delete noprompt backup of database;
delete noprompt copy of database;
Not sure how to pass the commands and also make sure the previous command is complete before the next one runs.

Max wrote:
Hey Opus,
I think your requirement is to create a windows batch file and run it using windows scheduler...am i right?
If yes do it like this;
You need 3 files..just for simplifying the problem..
create a batch file like ...... mybatch.bat (should have *.bat* extension)Why should it have the *.bat* extension? Why not *.cmd*? I've been around since before DOS 2.0 and remember that .cmd was supposed to replace .bat. Interesting discussions if you google "bat vs. cmd".
insert below commands there..
sqlplus /nolog @c:\sqlpluscom.sql
rman target=/ cmdfile="c:\rmancom.sql"
Now create sql file like below and place it in C:\ drive and insert commands below
sqlpluscom.sql
connect / as sysdba
alter database flashback off;
exit;
I believe the database has to me in MOUNT (not OPEN) mode for the above
>
Now create another sql file named rmancom in C:\ drive and place the commands below
rmancom.sql
run{
delete noprompt archivelog all;
delete noprompt backup of database;
delete noprompt copy of database;
}exit;
Now put the batch file in windows scheduler...
Hope this will do for you... :)
Thanks,
Max

Run scripts on a schedule

Is the a way to run scripts on a schedule? I have a script that I want to run 3 days (Mon, Wed, Fri) a week at a certain time.
How can I do this

lets use iCal seeing as it came with your mac.
create your script and save it where ever you want, open iCal create a new event, on the right hand side you will see the new events draw, set the time you want your script to activate in the from-to area, set it to repeat and end as you wish, go down to alarm and select open file in the drop down, then right below open file their should be another drop down select other from that, that will open a window now select your script, then in the next drop down select on date, your done.
let me no if you need any more help.
Budgie

[SOLVED] How to automatically run modprobe vboxdrv?

Hi,
I wonder how to automatically run at startup module vboxdrv such as for example always before running VirtualBox I have to type sudo modprobe vboxdrv and would like to improve this was done automatically. Please help and thank you
Last edited by formoza (2014-07-28 18:22:46)

see the wiki for kernel modules

How to print the script before realasing?

how to print the script before realasing?

Do you want to see the output of your SAPscript??and print it?? before you release.
Then goto NACE tcode and configure your script.
Example :
Goto Transaction NACE --> Select Application V1(Sales) --> Click on Output Types --> Select the output type as BA00 (as generally BA00 is the output type associated with Sales Order ) --> Double click on the Processing Routines folder on the left and it will display the Form name and the corresponding driver programs name.
Goto tcode VA03, and display the output from menu and do your printing.
Close the thread once your question is answered.
Regards,
SaiRam

How do I run a program after login, but before the desktop?

How would I run a program right after the initial login using gnome/JDE?
With CDE I could edit the ~/.dtprofile to get the desired effect, but dtprofile is a CDE configuration file.

There used to be sn automator action that might have gotten the job done. It was on http://automatorworld.com/ but I can't seem to find it now.
I haven't test this under Lion but there is a system preference pane called "Do Domething When" that should get the jeb done. http://www.azarhi.com/Projects/DSW/
I have taken the opposite approach. My iTunes library and I have the same problem if it has not been mounted when iTunes launches. I created an Automator app that mounts the music then launches iTunes. Try mounting the drive the launch Automator to create the following workflow.
1. Connect to server and select the external drive.
2. Us the Launch Application step to launch iTunes.
Unmount the external drive and test the workflow. If it works save the workflow as an app and use that to launch iTunes.

How to re-run output determination after goods issue through idoc

Hello,
i've got a question about output determination. We are currently in a process to automate picking, packing and goods issue through a 3rd party software. The software creates DELVRY03-Idocs including picking, packing and goods issue-information. Picking, packing and goods issue work just find and after submitting the idoc, the delivery is updated as needed.
The problem arises when it comes to printing the shipping document on the printer belonging to the picking station that just processed the delivery. To determine the correct printer, the external software includes the picking station number inside the idoc. A user exit in idoc_input_delivery puts the number (3 digits) into likp-traid. The customizing for using this field inside output determination is complete and seems to be working.
The problem is: as the number of the picking station is not known before goods issue, the LD00 message must not be generated before goods issue. I used the appropriate condition insinde the message scheme, the message is not generated until goods issue is complete. After processing the DELVRY03-Idoc, the message should be found and generated, but it isn't. When i take a look at the delivery after submitting the idoc, goods issue is complete, picking and packing is done - and no sign of an header message of type LD00. First i thought about a misconfiguration inside my customizing for output determination, but when i access the delivery via vl02n (change delivery), output determination seems to be processed again and without making any changes or actions, LD00 is generated and waiting for processing. After saving the delivery, LD00 is processed and the shipping document is printed exactly where it should be.
So, as my customizing seems to work and everything else around idoc processing doesn't make any problems either, i conclude that, after processing the idoc, R/3 just needs a little kick to re-run the output determination, find the now fitting condition for LD00, find the appropriate entry in the condition table and print the document.
I already tried report rsnast00, but this one just seems to run already created messages.
Any ideas how to automate this little "kick in the butt"?
Thanks in advance!

I'm working on a similar issue with ws_delivery_update. I'm not using the IDOC as you are, but I'm using the function in a program of mine to PGI the delivery, but the output isn't being added to the delivery. I've tried to run the function twice as you suggested, but that doesn't seem to work. Do you have any suggestions or ideas on things to try?
Thanks,
Eric

How to autoclick/run a button after Alert.Show() Event?

Hey Guys
So I have a alert.show happening for something like
public function test(evt:ResultEvent):void
if (evt.result.success == "yes")
mx.controls.Alert.Show("Yay!!!")
if (evt.result.success == "no")
mx.controls.Alert.Show("Nay")
Now I have another button called
<mx:Button label="Reload" id="Reload" />
I want that if the sucess == yes scenario is run.. After the popup box comes and a person click OK.. the reload button is run..
Please tell me how to do so??
Regards

You need to set up an event listener on the closeEvent.
Here is a quick example (untested):
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="absolute" creationComplete="init()">
<mx:Script>
<![CDATA[
import mx.events.CloseEvent;
import mx.controls.Alert;
private function init():void {
Alert.show("myText", "myTitle", Alert.OK | Alert.CANCEL, this, onClose);
private function onClose(event:CloseEvent):void {
if (event.detail == Alert.OK) {
trace("ok pressed");
} else {
trace("cancel pressed");
]]>
</mx:Script>
</mx:Application>

How can I run a vi after deploying into a PXI Machine

Hi;
I am wondering if there is anyone out there who knows how to run a vi after deploying into a PXI machine from my host machine. In my application, I have some vi's that are deployed into my PXI machine. My problem is that when I would like to start these vi's simultaneously after deploying them. My current approach is to call vi reference and then invoke-> run. However, since there vi's are being deployed from a host machine and they are running in the PXI machine, I don't know how to create vi reference with the path constant. In other words, how can I find out the path of my vi after being deployed into my PXI machine from the host.
Best Regards,
Solved!
Go to Solution.

When VIs are deployed onto a PXI Real-Time controller they are generally copied to a C:\ni-rt\startup directory on the controller.
Helpfully, this KnowledgeBase article talks about how specify and programmatically launch VIs on an Real-Time controller.
I hope this helps,
Fred V -- Product Support Engineer -- LabVIEW R&D -- National Instruments

How can we test SCript before sending to recipient/

Hi ,
How can we test the script before sending the recipient.
Regards,
venkat.

Hi,
you made your script in order to be use in a bussiness process. So you need to know each process, and then according to that do a sprecific action in the process. Ex: Sales Order creation can print a script.
Wich process is the script intended to?
Regards,
Pedr

Cannot prevent ExtendScript debugging while running scripts from After Effects

Hi,
I am facing this issue while running scripts from within After Effects. Whenever I am trying to run a script in After Effects, the script opens up in ESTK in the debug mode. The execution waits at the starting point of the script as if there is breakpoint even though there is none. I am not sure whether what I am missing, whether some debug flag needs to be reset etc. I am using After Effects CC on Windows 7 OS. Any help would be highly appreciated.
Thanks.

I tried running the script after removing all $.writeln() statements, but unfortunately that does not resolve the problem. For testing the issue, I am trying with the simple script given below :
var window = new Window ("palette", "My Window", undefined);
var panel = window.add("panel", undefined, "Panel");
var text = panel.add("statictext", undefined, "Testing AE");
window.show();
But executing even this one from AE opens up ESTK. I am absolutely stuck with this odd behaviour .

How to remove line space before/after paragraph in Photoshop Elements?

I am using Elements 12 and want to remove the extra spacing that is automatically inserted between paragraphs after a hard return. Is there some way to adjust the extra spacing before/after a paragraph in Elements?

Try resetting the tool (the little arrow next to four lines in the Text Options panel). Setting the leading manually works fine for me in PSE12 with hard carriage returns,
Cheers,
Neale
Insanity is hereditary, you get it from your children
If this post or another user's post resolves the original issue, please mark the posts as correct and/or helpful accordingly. This helps other users with similar trouble get answers to their questions quicker. Thanks.

How to automatic run a keynote

hi guy's
when i send a keynote presentation to a friend, every time he wants to open it , it opens in "work" mode, is there a way that when he double click the kenote presentation it wil automaticly run the presentation?

In the Document Inspector, there is an option in the Slideshow Settings section to "Automatically play upon opening". Checking this will do what you want.

ICalendar entries missing on device and iCloud after scheduled backup

Arghh...when I checked my schedule on my iPhone 4S Calendar today, everything was gone...EVERYTHING! I then checked calendar on iCloud from my laptop and the same thing. This seems to have happened 1) since an automatic, scheduled backup occured during the night and 2) since I installed the latest iOS.7 update (7.0.3) a day or two ago (the one that is supposed to fix glitches). So now I'm stuck and I don't know my work schedule (and seriously, I have 5 part-time jobs!).
Any help would be really appreciated! Thank you.

ITunes and iCloud backups are different and distinct.
Follow these steps to backup to an iCloud back up: http://support.apple.com/kb/ht1766

Run script before loggin starts

Hi everyone
I'm using a tmpfs for my /var/log folder, and because I don't want to loose all logs I have modified /etc/rc.local.shutdown following this thread so everything gets backed up each time in a different folder named after the time at which I shutdown.
https://bbs.archlinux.org/viewtopic.php … 10#p528010
But I'd prefer to have a XYZ folder with all logs which gets loaded to my tmpfs /var/log, so everything works like normal, and finally before shutdown, everything is copied back to folder XYZ. This way my HDD is only accessed for loggin matters at startup and shutdown. So far it's not difficult, except I want to run my script which does just that, before any loggin starts.
How can I execute commands or run a script while booting just between my tmpfs is mounted (declraed in /etc/inittab) and loggin starts? If possible including the minilogger at arch boot
Thanks very much in advance
Last edited by agon (2011-02-24 22:07:02)

Here we are again
I'm trying it now the way you suggest. I've written two simple scripts (my first ones ) which do as following:
[ LOGs => RAM ]
I call to this script in /etc/rc.local. It saves all logs in ram and then links the so that they appear again in /var/log
note: my /tmp folder is a tmpfs
#!/bin/bash
#/usr/bin/log-ram.sh
# Create /tmp/log: necessary for each boot because /tmp is volatile
# Copy /var/log to tmp/log: copy my complete logs to ram
# Rename /var/log to /var/log.backup: so I have a backup of them
# Create a new empty /var/log
#Link /var/log to /tmp/log: all logs (located in ram) appear in /var/log
echo "Copiando LOGs de HDD a RAM"
mkdir /tmp/log
cp -Rp /var/log/* /tmp/log/
mv /var/log /var/log.backup
mkdir /var/log
ln -sf /tmp/log/* /var/log/
Questions:
-Do you recommend calling this script latter or is it here ok (/etc/rc.local)? If it would be latter, where do you reccomend it? As you already noted, it has to be excecuted as root
[ LOGs => HDD ]home sweet home)
I call this script in /etc/rc.local.shutdown
All logs get copied back to /var/log and also a backup is made. Note that each time this script is ececuted a new backup is generated. That menas that for now I have to manually erase them when they get to many. Later (when I learn a bit more of scripting) I'll make the oldest get automatically erased.
#!/bin/bash
#/usr/bin/log-unram.sh
#Refresh the content of /var/backup so it's up to date
#Remove /var/log: so all symbolic links get erased
#Recreate /var/log: is there a faster way to do this and the last step?
#Copy from /tmp to /var: from RAM to HDD
#Rename and change directory of /var/log.backup with an unique identifier (time at which script is run).
echo "Copiando LOGs de RAM a HDD"
now=`date +"%Y%m%d_%Hh%M"`
cp -Rp /tmp/log/* /var/log.backup/
rm -r /var/log
mkdir /var/log
mv /tmp/log /var/log
mv /var/log.backup /var/log.old/$now/
Questions:
Is there a faster way to erase al symbolic links
As said, this are my two first attempts to writte a bash script (excetp the hello world one lol). So I probably did a lot wrong.
For now it seems to work (when calling them from shell) but I still didnt tried them with real powerup & shutdown. (Ill do it after posting this).
Thanks in advance
EDIT:
These scripts are give me problems. I'm trying to make now a syngle script which copies from HDD -> RAM or RAM -> HDD depending on if logs are already loaded or not. This way If my system crashes I dont have problems while booting (like the firefox-sync script).
As soon as I have something, I'll post it here
Last edited by agon (2011-02-27 13:06:11)

How to automatically run scripts before/after scheduled backup?

Similar Messages

Maybe you are looking for