How to avoid missing font dialog box(alert) while running the script??

Hi....
     In Illustrator CS4 ,I tried to skip missing font dialog box(alert box) by using the following script .But,I could not skip the dialog box
So if you have any suggestion about this let me know..
tell application "Finder"
set user interaction level to never interact
    activate
    set fileName to (path to desktop folder as string) & "fer11757_f1208.eps"
    --set user interaction level to never interact
    --    set user interaction level of script preferences to never interact
    open file fileName
    --set alert missing fonts to true
    set user interaction level to never interact
    activate
end tell
display dialog ("completed")
end tell
Thanks,
Mubeen

Does this NOT error when run? Your target application here is 'Finder' Apple's system file browser and you are giving it Adobe illustrator commands?
Im not 100% about the versioning with Illustrator installs I think they are all just…
Tell application "Adobe Illustrator" -- No CS Versioning?
-- do stuff here
end tell
you could check by just picking the app from this list
choose application

Similar Messages

How to find the missing fonts while running the script?

hi,
I need to create a script to find the missing font. not only for that. Actually i created a script to read the file properties. but i have a problem while running the script.
I have put "User Interation Level" to never interact. Even i need to check wheather each file have "missing fonts". mean time i never stop the script.
Is It Possible???
Regards,
SubhaOviya

Here's a shot of the Find Font Dialog:
Papyrus (highlighted in the list) is missing, and there's a yellow warning triangle to show that. Fonts that ar not missing have an icon to show the type of font. You'll also see it shown as missing in the "Info" box at the bottom of the dialog.
If you use the Replace With dropdown you will only see fonts listed that are installed on the system. In order to actually use the missing font, rather than substitute a different font in its place, you must obtain and install the missing font on the system.
Are you seeing something different when you open Find Font?

Batch processing in Quark 7 - how to avoid "missing font" interrruptions?

I have a time scheduled applescript which opens a folder of quark files, does some processing using a quark extension, closes each file and moves it to a separate location.
Problem is I get these "Filename uses fonts not installed in your system" dialog boxes with certain files which means I have to manually intervene and click the "Continue" button.
Is there any way of specifying in Applescript - ignore the missing fonts and continue processing the files?
Many thanks in advance!

Managed to get the answer on the Quark Applescript forum. For anyone else who encounters the same problem the line
use doc prefs yes remap fonts no do auto picture import no without reflow
used with the open quark document command should get rid of dialogs like this.

Avoid Missing Fonts Dialog on doc opening

Hi everybody,
I need to avoid the showing of dialog listing the missing fonts during the opening of a document.
I would like to do the same with the missing/modified image dialog.
Take present the document is opened by another plugin so I can't instruct InDesign to not to show such dialogs.
What could be a way to achieve that? Any hints will be greatly appreciated.
Thanks.
Best regards,
Luca Severini

Hi, You can try: InterfacePtr<ICommand> showMFCmd(CmdUtils::CreateCommand(kShowMissingFontsCmdBoss)); InterfacePtr<IWorkspace> workspace(gSession->QueryWorkspace()); InterfacePtr<IUIDData> uidData(showMFCmd, IID_IUIDDATA); uidData->Set(workspace); InterfacePtr<IBoolData> boolData(showMFCmd, IID_IBOOLDATA); boolData->Set(bEnable); CmdUtils::ProcessCommand(showMFCmd); This works with the font warning dialog. For the other cases i use kSuppressUI when available.

How to suprress the dialog box when we run the URL in the IE

Hi,
Is there any way to supress the dialog box which will ask for userid and pwd of the current SAP Box from where its being executed. Even if we enter the URL of the BSP application in the internet explorer I am getting the popup box for userid and pwd.
Regards
Ganesh

Hi,
You can supress the dialog box by entering default user ID and password in the application node in your SICF transaction. This is hardcoding sort of method.
Other way is like this,
Go to the BSP application SYSTEM. Execute the the page "sso2test.htm " to test the Single Sign on.
Pass on the User name & password via the URL as follows,
http://<host>:<port>/sap/bc/bsp/sap/system/sso2test.htm?sap-user=myName&sap-password=myPassword&sap-client=myClient
If single Sign on is enabled then the BSP page will not ask for a password.
The same thing you can follow in your own BSP application.
If SSO is not enabled then you need to go to the RZ10 transaction change the following parameters.
login/create_sso2_ticket
login/accept_sso2_ticket
login/ticket_expiration_time
Look at this link it would be helpful,
http://help.sap.com/saphelp_webas620/helpdata/en/5c/b7d53ae8ab9248e10000000a114084/frameset.htm
Hope this solves the problem. For further quiries pls revert back.
Regards,
Ravikiran.C

I see two dialog boxes when I run this script, why?

When I run this script I see two dialog boxes of "Would you like to Minimize firefox", the first has no default button selected, the second one does.
What is going on? How do I end up with only one dialog box?
set minfirefox to "Would you like to Minimize firefox?"
set tempvar to display dialog minfirefox buttons {"Yes", "No"}
set ButtonPressed to button returned of tempvar
display dialog minfirefox buttons {"Yes", "No"} default button "Yes"
if ButtonPressed is "yes" then
display dialog "you pressed " & ButtonPressed
else
display dialog "you should have pressed yes but you pressed " & ButtonPressed
end if

Hi--
Welcome to the Apple Discussions...
StewartAlexander wrote:
When I run this script I see two dialog boxes of "Would you like to Minimize firefox", the first has no default button selected, the second one does.
What is going on? How do I end up with only one dialog box?
You're telling it to display the dialog twice. Once here without the default button:
set tempvar to display dialog minfirefox buttons {"Yes", "No"}
and then again here:
display dialog minfirefox buttons {"Yes", "No"} default button "Yes"
But you're ignoring the buttons returned from the second one.
charlie
PS. This probably does more like what you want:
set minfirefox to "Would you like to Minimize firefox?"
set tempvar to display dialog minfirefox buttons {"Yes", "No"} default button "Yes"
set ButtonPressed to button returned of tempvar
if ButtonPressed is "yes" then
display dialog "you pressed " & ButtonPressed
else
display dialog "you should have pressed yes but you pressed " & ButtonPressed
end if

How to add FONT DIALOG box to my notepad application

hai friends.......
i am developing a notepad application like windows notepad. for that application i want add FONT dialog box.could you please tell me how to add font dialog box to my application.
thank you.........

Start by going through the Swing tutorials linked from the topic listing page of the [_Swing forum_|http://forums.sun.com/forum.jspa?forumID=57]. When you are confident of being capable of displaying a dialog with the components you need, correctly layed out, check out the API for GraphicsEnvironment#getAllFonts and Font@canDisplyUpTo.
Any Swing related questions you might have along the way should be posted in the Swing forum.
db

How to get title in Dialog box

How to get title in Dialog box like "Adobe® Connect™ "

Works for me. What happened when you tried?
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
font-weight: normal;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #E6E6EE;
overflow: auto;"
title="this text can be pasted into the AppleScript Editor">
tell application "Finder" to display dialog "I need ® or ™ in dialog box text" with title "I need ® or ™ in dialog box text" buttons {"Aha!"} default button 1</pre>

Suppressing the Missing Fonts Dialog

Hi
Does anyone know how to suppress the Missing Fonts dialog?
There was a topic about this a year ago in which a solution involving kShowMissingFontsCmdBoss was mentioned, but the example code doesn't seem to have any effect for me (in InDesign CS3).
Thanks,
Charles

Thanks, but that doesn't quite work. I can either disable the whole dialog or hide the Ok and Cancel buttons. Whichever way, the dialog still appears, and now I can't dismiss it.
Charles

How to use save as dialog box in swing

hello,
at the time of start the application by clicking the button, i hv to give the path to save my output file, how can i used this dialog box
thanks

[http://java.sun.com/docs/books/tutorial/uiswing/components/filechooser.html]

On a MBP with Mavericks how do I get the Save As dialog box to open at the same size and place at which it was last closed and used to happen before Mavericks?

Before I upgraded my MBP to Mavericks, the Save As dialog box would reopen at the same size and position as it was when last closed. Now with Mavericks it always opens in the same position at a very small size. Is there a way to make it reopen at the last place and size at which it was closed?

I have resolved the issues presented without having to find and uninstall the Macromedia Flash Player 8.0 in order to get "Adobe Flash Player 10" playback of .swf files on my computer. When I begin this task, I expected to download an "Adobe Flash Player 10" as a player program download instead of the Internet Explorer and Firefox plugin that it appears to be.
This is what I did and what I believe I have:
1. I setup Internet Explorer 6 as my default browser and then used the following site to download Adobe Flash Player 10
http://www.adobe.com/products/flashplayer/
2. As I had done before (and also suggested in another thread here), I went to Tools/Manage Add Ons and found Shockwave Flash Object, highlighted it, and clicked on Update Active X. Next, what I did not do before, I restarted the computer immediately after that.
3. Next, I set Mozilla Firefox as my default browser and then used the above site to download Adobe Flash Player 10 again.
4. With Firefox, the critical step included Firefox Tools/Options/Content with File Types (Configure how Firefox handles certain types of files) and the Manage Tab there. SWF Shockware Flash Object/Change Action/and dotting "use this plugin" - Shockwave Flash, followed by a computer restart got the job done.
Now, if I want playback of a .swf file, I can
a. Open With Internet Explorer (assumed with the Adobe Flash 10 "plugin")
b. Open With Mozilla Firefox (assumed with the Adobe Flash 10 "plugin")
c. Open With Macromedia Flash Player 8.0
I am satisfied with those results for my use. Any additional comments on the player vs plugin aspect of the matter would be interesting and helpful.
ATR

Missing advanced dialog box in photoshop elements 9

I am hoping someone out there can help. I have a missing advanced dialog box on my photoshop downloader page. I have photoshop elements 9. I saw that changing the screen resolution can sometime help this, however it does not in my case, I've tried all available. I have a new Dell Inspiron laptop and resolution is set at 1366 X 768. My computer was preloaded with photoshop elements 8. I can see the advanced dialog box in version 8. However, it is not in version 9. Does anyone have a suggestion? Thanks for your help.

Check your screen resolution settings for vista.
I believe the screen resolution needs to be at least 1024 x 768 for the camera raw dialog to show in pse 8.
For example, if instead of running VirtualBox full screen, your running it in windowed or seamless mode and made the window smaller by dragging on the corner, that would automatically lessen the screen resolution in vista.

How to develop a file dialog box in a oracle forms

please help me its an urgent task,
how to develop a file dialog box in a oracle 6i forms
in html we will use <input type ="file"/> to open a dialog box,so that we can upload file to the server .similarly how to upload a file using oracle.

For Windows there is a library that comes with forms d2kwutil.pll that contains a package win_api_dialog. use the open_file procedure.
NOTE******** when you select a file from whatever windows directory you choose, it will change your working directory to that directory so right after that you will need to reassign your working directory back to what it originally was.
Also, you will need to have d2kwut60.dll in the same directory as your d2kwutil.pll. Both come with Developer.
Example code is
v_runpath := win_api_environment.get_working_directory(TRUE);
v_filename := win_api_dialog.open_file('Find File','C:\','*.*',TRUE, 0, TRUE);
win_api_environment.set_working_directory(v_runpath,true);
Hope this helps

How to 'Exit' OO ALV screen type 'Model Dialog Box' using 'X' on the top?

HI Experts,
I have the below issue in my OO ALV screen type 'Model Dialog Box'...
The main screen is OO ALV and displays rows of data,
When select a line(row) and push any buttons
( u201CAdd Materialu201D, u201CAdd Binu201D, u201CModify Binu201D, u201CMove Materialu201D, u201CDisplay Batchesu201D)
the program will take you to next screen and it is a u201CModal dialog boxu201D type.
That screen has two buttons to exit ( u201CSAVEu201D and u201CCancelu201D ) on the bottom of the screen.
User would like to exit the screen using u201CXu201D on the top line right corner.
That u201CXu201D is not on for the u201CModal dialog boxu201D type screen.
How do I add event to close that screen using u201CXu201D?
Thanks in advance,
John.

data :GR_EVENT_HANDLER    TYPE REF TO LCL_EVENT_HANDLER,
       GR_DIALOG_CONTAINER TYPE REF TO CL_GUI_DIALOGBOX_CONTAINER,
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
    METHODS :
    HANDLE_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
    IMPORTING E_UCOMM,
    HANDLE_ON_DIALOGBOX_CLOSE FOR EVENT CLOSE OF CL_GUI_DIALOGBOX_CONTAINER
    IMPORTING SENDER,
ENDCLASS.                    "lcl_event_handler DEFINITION
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
METHOD HANDLE_USER_COMMAND.
CASE E_UCOMM.
     WHEN 'DBCON'.
        PERFORM DIALOG_DISPLAY.
ENDCASE.
ENDMETHOD.                    "HANDLE_USER_COMMAND
METHOD HANDLE_ON_DIALOGBOX_CLOSE.
    IF NOT SENDER IS INITIAL.
      CALL METHOD SENDER->FREE
        EXCEPTIONS
          OTHERS = 1.
      FREE GR_DIALOG_CONTAINER.
      CLEAR GR_DIALOG_CONTAINER.
    ENDIF.
ENDMETHOD.                    "handle_on_dialogbox_close
ENDCLASS.                    "lcl_event_handler IMPLEMENTATION
FORM DIALOG_DISPLAY .
DATA : L_TEXT(255),
              L_LIN TYPE I.
IF GR_DIALOG_CONTAINER IS INITIAL.
    CREATE OBJECT GR_DIALOG_CONTAINER
      EXPORTING
      PARENT                      =
        WIDTH                       = 400
        HEIGHT                      = 150
        STYLE                       = CL_GUI_CONTROL=>WS_SYSMENU
      REPID                       =
      dynnr                       = '100'
      LIFETIME                    = lifetime_default
        TOP                         = 100
        LEFT                        = 350
        CAPTION                     = 'Error Dialog Box'
      EXCEPTIONS
        CNTL_ERROR                  = 1
        CNTL_SYSTEM_ERROR           = 2
        CREATE_ERROR                = 3
        LIFETIME_ERROR              = 4
        LIFETIME_DYNPRO_DYNPRO_LINK = 5
        EVENT_ALREADY_REGISTERED    = 6
        ERROR_REGIST_EVENT          = 7
        OTHERS                      = 8.
ENDIF.
SET HANDLER GR_EVENT_HANDLER->HANDLE_ON_DIALOGBOX_CLOSE FOR GR_DIALOG_CONTAINER.
REFRESH IG_INDEX_ROWS.
CLEAR   WG_SELECTED_ROW.
CALL METHOD GR_ALVGRID->GET_SELECTED_ROWS
    IMPORTING
      ET_INDEX_ROWS = IG_INDEX_ROWS.
DESCRIBE TABLE IG_INDEX_ROWS LINES L_LIN.
IF L_LIN GT 0.
    READ TABLE IG_INDEX_ROWS INTO WG_SELECTED_ROW INDEX 1.
    READ TABLE IG_SAL INTO WG_SAL INDEX WG_SELECTED_ROW-INDEX.
    CONCATENATE 'Item' WG_SAL-POSNR 'of Sales Order' WG_SAL-VBELN 'has been selected' INTO L_TEXT
              SEPARATED BY SPACE.
ELSE.
    L_TEXT = 'Enter Netvalue greater than 500'.
ENDIF.
CALL METHOD GR_HTMLD->ADD_GAP
    EXPORTING
      WIDTH = 1.
CALL METHOD GR_HTMLD->ADD_TEXT
    EXPORTING
      TEXT = L_TEXT.
CALL METHOD GR_HTMLD->NEW_LINE.
Display the data
CALL METHOD GR_HTMLD->DISPLAY_DOCUMENT
    EXPORTING
      PARENT = GR_DIALOG_CONTAINER.
ENDFORM.                    " DIALOG_DISPLAY

How we can make CQ dialog box movable on page like sidestick?

Hello All,
How we can make CQ dialog box movable on page like sidestick.
Should we have to use any property for that.
Please tell me if any onw know this ticks.
Thanks a ton in advance...
Regards,
Satish

You could use dialogMode property configured under cq:editConfig node.
dialogMode : floating
http://dev.day.com/docs/en/cq/current/developing/components.html
This should make your component dialog float and be movable.
- Ashish

How to avoid missing font dialog box(alert) while running the script??

Similar Messages

Maybe you are looking for