How to avoid plugin error loading message on Window7 or 64 bit machine

Hi All,
I made a Illustrator CS4 plugin which run correctly on Window XP.
But I am facing a problem on Window 7 or 64 bit machine.
When I start the Illustrator application on Window 7, I get the "error loading plugin" message.
Please let me know how to resolve it If anyone have any idea.
Regards,
Jitendra

Hi Patterson,
Thanks for ur reply.
Now, I got a solution. Basically i was creating the log file which was store in program file.
If I run the Illustrator as "run as administrator", then every thing is fine.
Regards,
Jitendra

Similar Messages

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

How to avoid JS Error in the status bar when report doesnt contain value.

Hi
Whenever the tabular report doesnt show any records for the given input parameter (parameter passed using select list item).
We are displaying error message in APex. But at the status bar, it is showing "Error" (unspecified
error).
Kindly let me know how to avoid this kind of error at status bar.
Thanks
Vijay

Hi Vijay,
Your javascript is probably trying to access one or more of the items within a displayed tabular form - the "f01", "f02" etc named items.
If your script does something like:
var x = document.getElementsByName("f01");
..rest of your code for f01 items..you can test if there are any "f01" items by doing:
var x = document.getElementsByName("f01");
if (x){
..rest of your code for f01 items..
}If there are no items, x is null, so the "..rest of your.." script will not get executed and no errors will occur.
Andy

How to avoid mutating error when insert or update record

Hi ,
I have one transaction table which is having some detail record under one transaction number, after the one transaction number is over by insert or update, i
want to check the total amounts of one flag should be matched on same table if it is not then give error message. But i am getting mutating error on insert or update event trigger on statement level trigger on above table.
Is there any other way to avoid mutating error to solve the above problem or some temp table concepts to be used. help me its urgent.
Thanks in advance,
Sachin Khaladkar
Pune

Sachin, here's as short of an example as I could come up with on the fly. The sample data is ficticious and for example only.
Let's say I need to keep a table of items by category and my business rule states that the items in the table within each category must total to 100% at all times. So I want to insert rows and then make sure any category added sums to 100% or I will rollback the transation. I can't sum the rows in a row-level trigger because I'd have to query the table and it is mutating (in the middle of being changed by a transaction). Even if I could query it while it is mutating, there may be multiple rows in a category with not all yet inserted, so checking the sum after each row is not useful.
So here I will create;
1. the item table
2. a package to hold my record collection (associative array) for the trigger code (the category is used as a key to the array; if I insert 3 rows for a given category, I only need to sum that category once, right?
3. a before statement trigger to initialize the record collection (since package variables hang around for the entire database session, I need to clear the array before the start of every DML (INSERT in this case) statement against the item table)
4. a before row trigger to collect categories being inserted
5. an after statement trigger to validate my business rule
I then insert some sample data so you can see how it works. Let me know if you have any questions about this.
SQL> CREATE TABLE item_t
2   (category NUMBER(2)   NOT NULL
3   ,item_code VARCHAR2(2) NOT NULL
4   ,pct       NUMBER(3,2) NOT NULL);
Table created.
SQL>
SQL> CREATE OR REPLACE PACKAGE trg_pkg IS
2    TYPE t_item_typ IS TABLE OF item_t.category%TYPE
3      INDEX BY PLS_INTEGER;
4    t_item       t_item_typ;
5    t_empty_item t_item_typ;
6 END trg_pkg;
7 /
Package created.
SQL> SHOW ERRORS;
No errors.
SQL>
SQL> CREATE OR REPLACE TRIGGER item_bs_trg
2    BEFORE INSERT
3    ON item_t
4 BEGIN
5    DBMS_OUTPUT.put_line('Initializing...');
6    trg_pkg.t_item := trg_pkg.t_empty_item;
7 END item_bs_trg;
8 /
Trigger created.
SQL> SHOW ERRORS;
No errors.
SQL>
SQL> CREATE OR REPLACE TRIGGER item_br_trg
2    BEFORE INSERT
3    ON item_t
4    FOR EACH ROW
5 BEGIN
6    trg_pkg.t_item(:NEW.category) := :NEW.category;
7    DBMS_OUTPUT.put_line('Inserted Item for Category: '||:NEW.category);
8 END item_br_trg;
9 /
Trigger created.
SQL> SHOW ERRORS;
No errors.
SQL>
SQL> CREATE OR REPLACE TRIGGER item_as_trg
2    AFTER INSERT
3    ON item_t
4 DECLARE
5    CURSOR c_item (cp_category item_t.category%TYPE) IS
6      SELECT SUM(pct) pct
7        FROM item_t
8       WHERE category = cp_category;
9 BEGIN
10    DBMS_OUTPUT.put_line('Verifying...');
11    FOR i IN trg_pkg.t_item.FIRST..trg_pkg.t_item.LAST LOOP
12      DBMS_OUTPUT.put_line('Checking Category: '||trg_pkg.t_item(i));
13      FOR rec IN c_item(trg_pkg.t_item(i)) LOOP
14        IF rec.pct != 1 THEN
15          RAISE_APPLICATION_ERROR(-20001,'Category '||trg_pkg.t_item(i)||' total = '||rec.pct);
16        END IF;
17      END LOOP;
18    END LOOP;
19 END item_as_trg;
20 /
Trigger created.
SQL> SHOW ERRORS;
No errors.
SQL> INSERT INTO item_t
2    SELECT 1, 'AA', .3 FROM DUAL
3    UNION ALL
4    SELECT 2, 'AB', .6 FROM DUAL
5    UNION ALL
6    SELECT 1, 'AC', .2 FROM DUAL
7    UNION ALL
8    SELECT 3, 'AA', 1 FROM DUAL
9    UNION ALL
10    SELECT 1, 'AA', .5 FROM DUAL
11    UNION ALL
12    SELECT 2, 'AB', .4 FROM DUAL;
Initializing...
Inserted Item for Category: 1
Inserted Item for Category: 2
Inserted Item for Category: 1
Inserted Item for Category: 3
Inserted Item for Category: 1
Inserted Item for Category: 2
Verifying...
Checking Category: 1
Checking Category: 2
Checking Category: 3
6 rows created.
SQL>
SQL> SELECT * FROM item_t ORDER BY category, item_code, pct;
CATEGORY IT        PCT
         1 AA         .3
         1 AA         .5
         1 AC         .2
         2 AB         .4
         2 AB         .6
         3 AA          1
6 rows selected.
SQL>
SQL> INSERT INTO item_t
2    SELECT 4, 'AB', .5 FROM DUAL
3    UNION ALL
4    SELECT 5, 'AC', .2 FROM DUAL
5    UNION ALL
6    SELECT 5, 'AA', .5 FROM DUAL
7    UNION ALL
8    SELECT 4, 'AB', .5 FROM DUAL
9    UNION ALL
10    SELECT 4, 'AC', .4 FROM DUAL;
Initializing...
Inserted Item for Category: 4
Inserted Item for Category: 5
Inserted Item for Category: 5
Inserted Item for Category: 4
Inserted Item for Category: 4
Verifying...
Checking Category: 4
INSERT INTO item_t
ERROR at line 1:
ORA-20001: Category 4 total = 1.4
ORA-06512: at "PNOSKO.ITEM_AS_TRG", line 12
ORA-04088: error during execution of trigger 'PNOSKO.ITEM_AS_TRG'
SQL>
SQL> SELECT * FROM item_t ORDER BY category, item_code, pct;
CATEGORY IT        PCT
         1 AA         .3
         1 AA         .5
         1 AC         .2
         2 AB         .4
         2 AB         .6
         3 AA          1
6 rows selected.
SQL>

How to avoid Quicktime error 50 and 0?

How can I avoid Quicktime error 50 and 0? Are there know problems in FCPX that will generate errors in QT?

You can probably minimize you odds of getting corrupted clips by optimizing where possible.
Russ

Tricky : how to avoid this error transparent to users ?

Hello, Oracle people !
I probably have a very common problem / question ...
We use third party application (called Kintana) that has some SQL queries referencing my custom Oracle views.
Connection to Oracle via JDBC. Some of those views are also using packaged functions residing in one custom package. So when I need to change logic, I'm recompiling just PACKAGE BODY at off-hours time in production. But when next time user runs those queries via Kintana web interface they get an error :
-- The following error is thrown by the Database:
ORA-04068: existing state of packages has been discarded
ORA-04061: existing state of package body "KNTA.OM_MISC_LIBRARY_PKG" has been invalidated
ORA-04065: not executed, altered or dropped package body "KNTA.OM_MISC_LIBRARY_PKG"
But when users refresh their screen on IE browser,
error goes away. (probably Oracle calls it again and recompiles object restoring its valid state)
I understand that how Oracle works,
but I was given a task by Manager :
"Make sure that users don't see this error !"
(some of users are VIP, CIO, VPs and other "highly important" executives)
So I tried to avoid this error but can't ...
I don't know how to restore valid state of recompile package to existing user sessions without this error being seen ...
Please HELP !!!
thanx,
Steve.

I've been reluctant to tell you this since it could have some serious side effects and performance issues but you could reset the entire session package state by calling DBMS_SESSION.RESET_PACKAGE BEFORE you attempt the calls. The problem is that it resets ALL package's state information and I'm not aware of a way to do it for a single package. Unfortunately, it doesn't appear that you can call this routine after the exception occurs. For some reason, the exception seems to have to make it all the way back to the client before Oracle will acknowledge the reset.

How do you show a Loading Message at Application Start

Hello Everyone,
Let me first start off by saying that I was not quite sure if this message should be in the Abap Web Dynpro forum or a Portal forum. I have seen variations of this message with similar posts but no real solution (at least not that I could find).
The issue that we are encountering is that no loading message is being displayed when we have an Abap Web Dynpro Application that is loading in a Portal iView. For example, we have some Abap Web Dynpros that may take approx. 30 seconds to load. No loading message is being sent to the the user via the Portal iView to inform the user that the page is being loaded, thus the user generally things that something is wrong or nothing will be displayed.
I have reviewed the configuration of the iView and all seems to be correct. The Show Loading Message property is set to 'Yes' for example. Does anyone know of a solution on the Abap Web Dynpro side (or the Portal if possible) which will show a message to the user if the application is loading? Possibly something like "Page is loading. Please Wait..."?
Best Regards,
Scott
Edited by: Scott Hardin on Jun 12, 2009 5:50 AM

Hi,
I had a simmilar requirement once, i also had to display some meaningful message with the busy mode icon, but i guess that comes directly from the WD Framework and is not possible to be changed. Refer the following thread, i raised that time.
Web Dynpro ABAP
Dont have much idea if somethig exists in portal for this.
Regards,
Runal

Error 500 Out of Memory on x64 bit machine

Using windows vista 64bit business
x64 bit machine 32 bit application
using visual fox pro odbc driver
Happens on Crystal reports 8 and 10
After 3+ million records with our query we receive an Error 500 out of memory.
Under windows 32bit machine, we haven't encountered this issue regardless the size of data.
Any thoughts?

Hi Alex
As mentioned earlier Crystal Reports 9 and 10 are not tested platfrom with Windows Vista.
Try using Crystal Reports 2008 and check if you are facing any issues.
Hope this helps.
Please let us know if you have any further queries.
Regards
Ashwini Yadav

How do I fix "Error loading plugins" when I launch illustrator CS6 on my Mac?

At some point, I accidently moved one or more file folders in illustrator. When I launch the app now I get a list of the following errors.
Advanced Select.aip
Flare.aip
FlattenTransparencyUI.aip
ObjectMosaic.aip
PNGFileFormat.aip
When the app opens I am missing several necessary components on my artboard.

Easiest way is to uninstall and reinstall (possibly running the Cleaner tool in between).
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

How to avoid the form's message situation

hi all,
i am using Forms [32 Bit] Version 6.0.8.24.1 (Production).
i have base table block. So at the time of saving some process should happen, based on selected record.
so i have written the procedure in key-commit trigger. But my problem is when user edit the data and close the form then the message pops up as usual(do you want..) if i give yes then the procedure is not firing.
I got a feed back that that message(do you want to save the changes) situation itself i should avoid. How can i avoide that message situation.
Forcing the user to save in pre-commit trigger is one option but my question is this situation can be avoided?
Is this can be done?
Please advise.
Thanks..

do i have to place my code in 'on-update' or 'pre-update' trigger?I mentioned ON-UPDATE (block-level)
and one more question the checkbox is control item. so when i am selecting or deselecting the check box do i have to set the record status?Yes, you need to change the record status to change if check box is non-database item.
but one more question i want ask. The process what i am doing should happen only when user saves the record. If i write it in the block level trigger if user doesnot save the recod and exists then also my process will fire?No.
if i write my code in block level means.
if for any record if any error means i have to stop the full process itself and nothing should happen. In other words if user process 4 record and in 5 record he is getting error means the four records also should not go into table. is this will happen if i move the code to block level trigger?Yes it will not continue and will not send any record in database.
-Ammad

How to avoid Linkage Error in JAVA Mapping

Dear Experts,
I am trying to test the JAVA mapping compiled in NWDS but receiving the error
"LinkageError at JavaMapping.load(): Could not load class".
java.lang.NoClassDefFoundError: JSONXMLProject/bin/com/sap/json/ConvJson2Xml (wrong name: com/sap/json/ConvJson2Xml)
at java.lang.ClassLoader.defineClass1(Native Method) at java.lang.ClassLoader.defineClassCond(ClassLoader.java:735)
at java.lang.ClassLoader.defineClass(ClassLoader.java:716) at java.lang.ClassLoader.defineClass(ClassLoader.java:537)
at com.sap.aii.ib.server.mapping.execution.MappingLoader.findClass(MappingLoader.java:195)
Following are the details:
SAP PO 7.4
SP Stack Number 05
JDK Version jdk16
NWDS
SAP Enhancement Package 1 for SAP NetWeaver Developer Studio 7.3 SP10 PAT0000
1.Created the Project , Package and then class (Included the logic)
2. Included 1 JSON Jar file into my project and the Added to build path.
3.Exported the project as Archive File and saved in desktop
4.Imported into SAP PO system as Imported Archive
5.Could not observe the JSON jar file which i used as referenced JAR in NWDS
6.Tested in OM after referencing the JAVA class and found the above error.
I have JDK 5, 6 and 7 present in my local desktop and I am trying to export the compiled code using both JAVA SE 1.6 and 1.5 in NWDS seperatly after going several discussions.
Can any one hep me with the screenshots and tell me how to include all the reference jar files in exported project..
Regards..

Dear Anand,
I did exactly as you shared. As the JSON jar has number of classes, then in OM all the Classes had to be assigned. Then the linkage error went.
But in execution , it shows a new error that all the classes of the JSON jar has to be implemented with interface StremTransformation or AbstractTransformation.
I assume in the Operation Mapping I will use only 1 class as JAVA Class. Anyway I am attaching the document with navigation.
Do we have any other alternative??
Please rename the extension of the document by remove .txt
Regards

How get rid of Original Loaded message

Hi,
Can anyone help me solve the following issue with my HP Photosmart C6180 All in One;
Some how I have managed to get a message on the printer screen saying "Original Loaded"
I have turned off the printer, entered the copy menu but can't find anyway of deleting it. Since it appeared I am unable to use the copier, it makes a noise and produces a blank page.
Thanks for taking time to read this and any advice will be appreciated.
Kevin
This question was solved.
View Solution.

Hi,
I have the same problem.
I looked for the "thin black plastic piece" but i did not find it.
Can you please add a picture of that thin black plastic so i can understand what to look for and try solve the problem?
Thanks
Meir

How can I view or load messages in my mail folders? It disappeared somewhere? It's not loading. Please help.

I tried to view the messages in the "folders" in my mail, but unfortunately, it's not loading anything...it was perfectly doing okay before not until 3 days ago. Someone can help me fix this out is greatly appreciated. Thanks.

Always try the simple things first .... a simple restart may work.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit the mail app and restart the iPad. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

How to avoid duplicate data loading from SAP-r/3 to BI

Hi !
       I have created one process chain that will load data into some ODS from R/3,where(in R/3)the datasources/tables r updated daily.
       I want to scheduled the system such that ,if on any day the source data is not updated (if the tables r as it is) then that data shuold not be loaded into ODS.
       Can any one suggest me such mechanism,so that I can always have unique data in my data targets.
       Pls ! Reply soon.
      Thank You !
       Pankaj K.

Hello Pankaj,
By setting the unique records option, you pretty much are letting the system know to not check the uniqueness of the records using the change log and the ODS active table log.
Also, in order to avoid the problem where you are having dual requests which are getting activated at the same time. Please make sure you select the options "Set Quality Status to 'OK' Automatically" and "Activate Data Automatically" that way you would be having an option to delete a request as required without having to delete the whole data.
This is all to avoid the issue where even the new request has to be deleted to delete the duplicate data.
Untill and unless the timestamp field is available in the table on top of which you have created the datasource it would be difficult to check the delta load.
Check the table used to make sure there is no timestamp field or any other numeric counter field which can be used for creating a delta queue for the datasource you are dealing with.
Let me know if the information is helpful or if you need additional information regarding the same.
Thanks
Dharma.

How to avoid Unicode errors in SAP custom code queries.

Currently we are going for a non Unicode technical upgrade from 4.6C to ECC 6.0.
We have many query infosets with custom ABAP code. Unable to execute these queries (infosets) as ECC 6.0 system is throwing short dump and query infoset editor throwing Unicode syntax errors . Anyway to avoid these Unicode errors by changing query or infoset system setting.
We will proceed with infosets ABAP code Unicode remediation if the above is not feasible.
Thanks in advance.

If the infosets are with custome abap code let the UCCHECK be happen on these programs in ecc6 ..
In tcode UCCHECK the code which needs to be replaced for the custom programs will be provided for the abap developers . All programs in ecc6 should be ucc compliant . I hope this will happen with the abap upgrade by enabling ecc6 .
they will enable ecc check and do the code modification for moving out the obselete statements in ecc6 which were ok for 4.6c then .
Dont worry about the dumps as this will not take much time on a single program once the UCC is over ..
Br,
vijay.

How to avoid plugin error loading message on Window7 or 64 bit machine

Similar Messages

Maybe you are looking for