How to avoid the same BW metachain to run in parallel?
Hi Everyone,
I had an issue in which the a metachain was triggered unexpectedly while it is already running. Hence parallel processing occurred.
I just wonder if you have a proposed solution that will avoid this scenario. Possibly a chain/job set-up that can be integrated to that metachain that would check if there is already an active job running corresponding to that chain.
I hope somebody can help me.
Thanks a lot.
Hi Kat,
i extended the code of my first post. Please pay attention on the bold line "if chain_active NE 'X' AND SY-UZEIT BETWEEN ‘000000’ AND ‘013000’" -> This line effects that the chain will only be executed between the time 00:00:00 and 01:30:00. I hope this helps to solve your issue.
Data it_logs type table of RSPC_S_LOG_F4.
Data wa_logs like line of it_logs.
data chain_active type boolean value '-'.
CALL FUNCTION 'RSPC_API_CHAIN_GET_RUNS'
EXPORTING
I_CHAIN = 'myMetaChain'
I_DATE = sy-datum
TABLES
E_T_LOGS = it_logs
EXCEPTIONS
FAILED = 1
OTHERS = 2.
Loop AT it_logs into wa_logs.
if wa_logs-analyzed_status= 'A'.
chain_active = 'X'.
endif.
endloop.
*Now there is an additional check. The chain only starts if the system time is
*between 00:00:00 and 01:30:00.
if chain_active NE 'X' AND SY-UZEIT BETWEEN ‘000000’ AND ‘013000’.
CALL FUNCTION 'RSPC_API_CHAIN_START'
EXPORTING
i_chain = 'myMetaChain'
* I_T_VARIABLES =
* I_SYNCHRONOUS =
* I_SIMULATE =
* I_NOPLAN =
* I_DONT_WAIT =
* IMPORTING
* E_LOGID =
EXCEPTIONS
FAILED = 1
OTHERS = 2.
Kind regards,
Andreas
Similar Messages
-
How to avoid the same order in shuffle within a given playlist.
I know how to get the entire library to shuffle on the Nano. I [think I] have the Nano set to shuffle within a given playlist, but the order of the shuffling is always the same. I have tried turning off/on "shuffle songs" but the Nano maintains the same order within a given playlist.
Any suggestions?
Compaq Evo N1020v Windows XP laptopgo to settings>shuffle>menu>music>playlists>select a playlist>play a song see what happens.
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span> -
How to avoid the same songs being selected by Genius playlists
I love iTunes Genius for making play lists, but I am annoyed by the fact that some songs are chosen again and again. For some reason "16 by 32" by the Decemberists pulled nearly every time I make a Genius playlist even though I've never chosen to play the track directly. Amazingly, it has racked up 150% of the plays of the next closest track that I actively listen to. Is there some way to have Genius ignore tracks or artists entirely without removing them from my iTunes library? Are there any ways to tweak Genius to provide a better sampling of tracks rather than the same old same old?
thanks,
DerekYou can uncheck the little check box to the left of track's name.
This will mean iTunes always skips it unless you specifically select it. It has other side effects too. -
How to use the same button to control run or stop of the program?
I want to run a program when I press Boolen2, I use switch when press. So when I press it, it will turn "on" stature. There is a loop in the program. I want to stop it, when press the button again, that is when make the button from "on" statue to "off" stature.
But I don't know why it doesn't work in my vi. And is there other good way?
Thank you.
Attachments:
question2.vi 124 KBHi,
Thank you very much.Please download this file and save it under the same path,and change its extern name to dll.
I have tried follow your vi. But this method doesn't work properly in my vi. I don't know why.
Maybe it is because there is a highspeed data acquisition working in the loop. And I have tried to wait 100ms every loop.But it doesn't work.
Thank you for your help.
Hugo Liang.
Attachments:
MP421.txt 237 KB -
How to avoid the pdf file in browser cache
i am opening pdf files through browser. After that same pdf changed their contents . after i open the pdf but it will not updated. Bcoz this file in cache . so how to avoid the cache store for pdf files.
plz help me!!!the code is as bellow
File fBlob = new File ("test.pdf");
FileInputStream fIS = new FileInputStream(fBlob);
pstUpdate= con.prepareStatement("UPDATE table set file = ? where id = ?");
pstUpdate.setBinaryStream(1, fIS, (int) fBlob.length());
pstUpdate.setString(2, rs.getString("id"));
pstUpdate.execute();
con.commit(); -
How to avoid the transport request popup when changing real-time load behav
Hello experts,
I'm often switching between the two loading mode, and I already worked in systems where I don't have the popup for transport request : (so I guess there is a possible tuning anywhere)
How to avoid the "asking for a transport request" popup in BW when changing real-time load behaviour of an infocube
Thanks in advance, I will save precious time
Guillaume P.Hello Krishnan,
i tried to switch all object types from "not changeable" to "changeable original", but still get the popup when switching cube loading mode.
Do you know the particular object type to manage ?
Hello Vishnu,
same thing, whatever the option is (switch on / off standard) I have the transport popup.
Anyway thanks for your try. -
How to avoid the below nested select statement
Please any one help me how this select statemet is working and how to avoid the nesetd select statement .
if we avoid below nested , does it improve performace ?
select field1 field2
into table w_feeds
from ZTable as t
where field2 in r_feedf1
and POSITION_POSTDT =
( SELECT MAX( position_postdt ) FROM zTable
where position_postdt le r_pdate-high
and field1 = t~field1 ).
Thanks in Advace.Hi,
Instead of nested query go for two separate queries. I see you are querying on the same table...so better go by this approach
select field1 field2 POSITION_POSTDT
into table w_feeds
from ZTable
where field2 in r_feedf1.
Remove the where condition on POSITION_POSTDT
Sort the table w_feeds by POSITION_POSTDT Descending; So you will get data pertaining to Max Position_Postdt.
Finally delete the other entries which are not Max.
This will enhance the performance over the nested query.
Regards
Shiva
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM
Edited by: Shiva Kumar Tirumalasetty on Apr 27, 2010 7:00 PM -
How to use the same POWL query for multiple users
Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
SandhyaBatch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..
-
How to avoid the duplicate values, I do not want the duplicate............
i have one database table called "sms1" that table is updated every day or on daily basis it has the following fields in it:
SQL> desc sms1;
Name Null? Type
MOBILE NUMBER
RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)
SNO NUMBER
INDATE DATE
From this table the is one column "RCSTCNATCNATCNATCNAWTHER VARCHAR2(39 CHAR)" . I am splitting it into different columns like :
SQL> desc smssplit;
Name Null? Type
R VARCHAR2(2 CHAR)
C VARCHAR2(2 CHAR)
S VARCHAR2(1 CHAR)
TC VARCHAR2(3 CHAR)
NA VARCHAR2(3 CHAR)
TC2 VARCHAR2(3 CHAR)
NA2 VARCHAR2(3 CHAR)
TC3 VARCHAR2(3 CHAR)
NA3 VARCHAR2(3 CHAR)
TC4 VARCHAR2(3 CHAR)
NA4 VARCHAR2(3 CHAR)
WTHER VARCHAR2(10 CHAR)
SNO NUMBER
INSERTDATA VARCHAR2(25 CHAR)
Now I am written a procedure to insert the data from "Sms1" table to smssplit table...
CREATE OR REPLACE PROCEDURE SPLITSMS
AS
BEGIN
INSERT INTO scott.SMSSPLIT ( R,C,S,TC,NA,TC2,NA2,TC3,NA3,TC4,NA4,WTHER,SNO)
SELECT SUBSTR(RCSTCNATCNATCNATCNAWTHER,1,2) R,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,3,2) C,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,5,1) S,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,6,3) TC,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,9,3) NA,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,12,3) TC2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,15,3) NA2,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,18,3) TC3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,21,3) NA3,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,24,3) TC4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,27,3) NA4,
SUBSTR(RCSTCNATCNATCNATCNAWTHER,30,10) WTHER, SNO
FROM scott.SMS1 where SNO=(select MAX (sno) from SMS1);
END;
Now in order to update the second table with data from first table on regular basis I have written a job scheduler and I am using oracle 9.0. version...
DECLARE
X NUMBER;
JobNumber NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
job => X
,what => 'scott.SPLITSMS;'
,next_date => SYSDATE+1/1440
,interval => 'SYSDATE+1/1440 '
,no_parse => FALSE
:JobNumber := to_char(X);
END;
Now this job scheduler is working properly and updating the data for every one minute but it is taking or updating the duplicate values also ..like example:
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:49:16
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:50:17
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:51:19
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:52:20
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
R C S TC NA TC2 NA2 TC3 NA3 TC4 NA4 WTHER SNO
INSERTDATA
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:53:22
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
33 35 2 123 456 789 543 241 643 243 135 RRRRRR 55
06-SEP-2012 03:54:45
Now I do not want the duplicate values to be updated ...and want them to ignore them.....
please I need a help on this query........How to avoid the duplicate values............Look at the posts closely:might not be needed if formatted ;)
create or replace procedure splitsms as
begin
insert into scott.smssplit (r,c,s,tc,na,tc2,na2,tc3,na3,tc4,na4,wther,sno)
select substr(rcstcnatcnatcnatcnawther,1,2) r,
substr(rcstcnatcnatcnatcnawther,3,2) c,
substr(rcstcnatcnatcnatcnawther,5,1) s,
substr(rcstcnatcnatcnatcnawther,6,3) tc,
substr(rcstcnatcnatcnatcnawther,9,3) na,
substr(rcstcnatcnatcnatcnawther,12,3) tc2,
substr(rcstcnatcnatcnatcnawther,15,3) na2,
substr(rcstcnatcnatcnatcnawther,18,3) tc3,
substr(rcstcnatcnatcnatcnawther,21,3) na3,
substr(rcstcnatcnatcnatcnawther,24,3) tc4,
substr(rcstcnatcnatcnatcnawther,27,3) na4,
substr(rcstcnatcnatcnatcnawther,30,10) wther,
sno
from scott.sms1 a
where sno = (select max(sno)
from sms1
where sno != a.sno
); ---------------> added where clause with table alias.
end;Regards
Etbin -
How can avoid the problem of Parameter Prompting when I submitting ?
I am developing web application in visual studio 2008 in csharp.How can avoid the issue or problem of Parameter Prompting when I send parameters programaticaly or dyanmicaly? I am sending the values from .net web form to crystal report but it is still asking for parameters. so when i submit second time that is when the reports is being genereated. How can i solve this problem. Please help. The code Iam using is below.
1. using System;
2. using System.Collections;
3. using System.Configuration;
4. using System.Data;
5. using System.Linq;
6. using System.Web;
7. using System.Web.Security;
8. using System.Web.UI;
9. using System.Web.UI.HtmlControls;
10. using System.Web.UI.WebControls;
11. using System.Web.UI.WebControls.WebParts;
12. using System.Xml.Linq;
13. using System.Data.OleDb;
14. using System.Data.OracleClient;
15. using CrystalDecisions.Shared;
16. using CrystalDecisions.CrystalReports.Engine;
17. using CrystalDecisions.Web;
18.
19.
20. public partial class OracleReport : System.Web.UI.Page
21. {
22. CrystalReportViewer crViewer = new CrystalReportViewer();
23. //CrystalReportSource crsource = new CrystalReportSource();
24. int nItemId;
25.
26. protected void Page_Load(object sender, EventArgs e)
27. {
28. //Database Connection
29. ConnectionInfo ConnInfo = new ConnectionInfo();
30. {
31. ConnInfo.ServerName = "127.0.0.1";
32. ConnInfo.DatabaseName = "Xcodf";
33. ConnInfo.UserID = "HR777";
34. ConnInfo.Password = "zghshshs";
35. }
36. // For Each Logon parameters
37. foreach (TableLogOnInfo cnInfo in this.CrystalReportViewer1.LogOnInfo)
38. {
39. cnInfo.ConnectionInfo = ConnInfo;
40.
41. }
42.
43.
44.
45.
46.
47.
48. //Declaring varibles
49. nItemId = int.Parse(Request.QueryString.Get("ItemId"));
50. //string strStartDate = Request.QueryString.Get("StartDate");
51. //int nItemId = 20;
52. string strStartDate = "23-JUL-2010";
53.
54. // object declration
55. CrystalDecisions.CrystalReports.Engine.Database crDatabase;
56. CrystalDecisions.CrystalReports.Engine.Table crTable;
57.
58.
59. TableLogOnInfo dbConn = new TableLogOnInfo();
60.
61. // new report document object
62. ReportDocument oRpt = new ReportDocument();
63.
64. // loading the ItemReport in report document
65. oRpt.Load("C:
Inetpub
wwwroot
cryreport
CrystalReport1.rpt");
66.
67. // getting the database, the table and the LogOnInfo object which holds login onformation
68. crDatabase = oRpt.Database;
69.
70. // getting the table in an object array of one item
71. object[] arrTables = new object[1];
72. crDatabase.Tables.CopyTo(arrTables, 0);
73.
74. // assigning the first item of array to crTable by downcasting the object to Table
75. crTable = (CrystalDecisions.CrystalReports.Engine.Table)arrTables[0];
76.
77. dbConn = crTable.LogOnInfo;
78.
79. // setting values
80. dbConn.ConnectionInfo.DatabaseName = "Xcodf";
81. dbConn.ConnectionInfo.ServerName = "127.0.0.1";
82. dbConn.ConnectionInfo.UserID = "HR777";
83. dbConn.ConnectionInfo.Password = "zghshshs";
84.
85. // applying login info to the table object
86. crTable.ApplyLogOnInfo(dbConn);
87.
88.
89.
90.
91.
92.
93. crViewer.RefreshReport();
94.
95. // defining report source
96. crViewer.ReportSource = oRpt;
97. //CrystalReportSource1.Report = oRpt;
98.
99. // so uptill now we have created everything
100. // what remains is to pass parameters to our report, so it
101. // shows only selected records. so calling a method to set
102. // those parameters.
103. setReportParameters();
104. }
105.
106. private void setReportParameters()
107. {
108.
109. // all the parameter fields will be added to this collection
110. ParameterFields paramFields = new ParameterFields();
111. //ParameterFieldDefinitions ParaLocationContainer = new ParameterFieldDefinitions();
112. //ParameterFieldDefinition ParaLocation = new ParameterFieldDefinition();
113.
114. // the parameter fields to be sent to the report
115. ParameterField pfItemId = new ParameterField();
116. //ParameterField pfStartDate = new ParameterField();
117. //ParameterField pfEndDate = new ParameterField();
118.
119. // setting the name of parameter fields with wich they will be recieved in report
120.
121. pfItemId.ParameterFieldName = "RegionID";
122.
123. //pfStartDate.ParameterFieldName = "StartDate";
124. //pfEndDate.ParameterFieldName = "EndDate";
125.
126. // the above declared parameter fields accept values as discrete objects
127. // so declaring discrete objects
128. ParameterDiscreteValue dcItemId = new ParameterDiscreteValue();
129. //ParameterDiscreteValue dcStartDate = new ParameterDiscreteValue();
130. //ParameterDiscreteValue dcEndDate = new ParameterDiscreteValue();
131.
132. // setting the values of discrete objects
133.
134.
135. dcItemId.Value = nItemId;
136.
137. //dcStartDate.Value = DateTime.Parse(strStartDate);
138. //dcEndDate.Value = DateTime.Parse(strEndDate);
139.
140. // now adding these discrete values to parameters
141. //paramField.HasCurrentValue = true;
142.
143.
144.
145. //pfItemId.CurrentValues.Clear();
146. int valueIDD = int.Parse(Request.QueryString.Get("ItemId").ToString());
147. pfItemId.Name = valueIDD.ToString();
148.
149. pfItemId.CurrentValues.Add(dcItemId);
150. //ParaLocation.ApplyCurrentValues;
151. pfItemId.HasCurrentValue = true;
152.
153. //pfStartDate.CurrentValues.Add(dcStartDate);
154. //pfEndDate.CurrentValues.Add(dcEndDate);
155.
156. // now adding all these parameter fields to the parameter collection
157. paramFields.Add(pfItemId);
158.
159. //paramFields.Add(pfStartDate);
160. //paramFields.Add(pfEndDate);
161. /////////////////////
162. //Formula from Crystal
163. //crViewer.SelectionFormula = "{COUNTRIES.REGION_ID} = " + int.Parse(Request.QueryString.Get("ItemId")) + "";
164. crViewer.RefreshReport();
165. // finally add the parameter collection to the crystal report viewer
166. crViewer.ParameterFieldInfo = paramFields;
167.
168.
169.
170. }
171. }Keep your post to under 1200 characters, else you loose the formatting. (you can do two posts if need be).
Re. parameters. First, make sure yo have SP 1 for CR 10.5:
https://smpdl.sap-ag.de/~sapidp/012002523100009351512008E/crbasic2008sp1.exe
Next, see the following:
[Crystal Reports for Visual Studio 2005 Walkthroughs|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2081b4d9-6864-2b10-f49d-918baefc7a23]
CR Dev help file:
http://msdn2.microsoft.com/en-us/library/bb126227.aspx
Samples:
https://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsfor.NETSDK+Samples
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup -
How to register the same schema with same URL
I'm getting ORA-31085 error when try to register the same schema with same URl.
My requirement is that I should be able to reregister the same schema with the same URL .
I'm using the following function :
PROCEDURE validateXmlSchema(inp_xmlMsg IN VARCHAR2,
out_isValidDoc IN OUT NUMBER,
inp_xmlSchema IN OUT VARCHAR2,
out_varchar_notused OUT VARCHAR2)IS
xmldoc XMLType;
res number;
BEGIN
xmldoc := XMLtype(inp_xmlMsg);
res := xmldoc.isSchemaValid(inp_xmlSchema);
IF (xmldoc.isSchemaValid = 1) THEN
out_isValidDoc := 1;
ELSE
out_isValidDoc := 0;
END IF;
END validateXmlSchema;
This is used recursively.Until the schema is not validated for a given URL this function should keep on throwing error and once the schema is validated the data should be inserted in the DB.
But its not happening as of now instead the ORA-31085 is thrown second time.
Plz provide pointers to solve the issue."mjs" <[email protected]> wrote in message
news:g7kjk5$o6$[email protected]..
> "mjs" <[email protected]> wrote in message
> news:g7gl2g$i3d$[email protected]..
>> "Zorrrro" <[email protected]> wrote
in message
>> news:g7gcjv$a6n$[email protected]..
>>> I'm completely nuckered trying to find an answer
for this...
>>>
>>> Does anyone know how to keep the same width an
position of the submenus
>>> of a
>>> horizontal dropdown menu?
>>> Thank you in advance.
>>>
>>> Cheers.
>>
>> Doesn't a simple style="width:200px" in the input
tag work?
>
> I'll asume the answer is "yes", then. ;) You're welcome.
I believe the OP is talking about a dropdown menu like this
one
http://www.tjkdesign.com/articles/keyboard_friendly_dropdown_menu/default.asp
not about a "select menu".
I could be wrong though...
Thierry
Articles and Tutorials:
http://www.TJKDesign.com/go/?0
http://developer.yahoo.com/
helps you build applications and mashups -
How to Use the same iview for both KM End User and the KM Administrator
Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan. -
How to use the same OC4j server with different port number
How to use the same OC4j server with different port numbers..?
I have to OC4J installed on my machine on different hard disk drives....
I want to be able to run both the server simultaneously..?
is it possible ..it yes then how..?
for that i have changed the port number of one server...
but when i am trying to start the other server with different port number..it says that JVM -Bind already...
Is there any clues...?
Nilesh GIn the config directory:
default-web-site.xml: Change the port the HTTP listener listens on
jms.xml: Change the port the JMS service listens on
rmi.xml: Change the port the ORMI listener listens on.
Or, you can add another web-site.xml file, and deploy your applications to 1 server, and bind the web applications to the different web sites. This way you only have to deploy your applications to 1 place.
Rob
Oracle -
How to use the same services-config for the local and remote servers.
My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
<services>
<service id="amfphp-flashremoting-service"
class="flex.messaging.services.RemotingService"
messageTypes="flex.messaging.messages.RemotingMessage">
<destination id="amfphp">
<channels>
<channel ref="my-amfphp"/>
</channels>
<properties>
<source>*</source>
</properties>
</destination>
</service>
</services>
<channels>
<channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
</channel-definition>
</channels>
</services-config>
I think the problem is the line
<endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime . -
How to use the same email address for outgoing email on two iPads?
How to use the same email address for outgoing email on two iPads?. My wife and I both use the same email address. We receive the same incoming email on both iPads but are unable to send email from my wife's iPad. She is using an iPad 2 and is usng IOS 6.0.1
Hi Creaturekeeper,
If you've added the account into the iPad and you are unable to send email from it, then please follow the troubleshooting in the article below.
Get help with Mail on iPhone, iPad, and iPod touch - Apple Support
Take care,
Alex H.
Maybe you are looking for
-
The App Store Keeps Giving me Updates for The person who Previously owned my Computer??!
Can ANyone Help with this, my itunes is registers to me + my mac etc so dont understand how this has happened :S I click update and the Guys email pops up. Please help!
-
Using TASCAM US-122 with GarageBand...doesn't seem to work
And not only with GarageBand...the software that the US-122 came with isn't even picking up the signals omitted from the TASCAM itself. I hooked up a keyboard to my TASCAM using a cable (I'm not sure what it's called...but it's the same thing you wou
-
Splitting - But still some characters exist to remove them - Help
I am using the following code to split the text into words but the words containing "trees," still exist in the words that are obtained as output. Is there a way by which I could get rid of ,,;,:, &, !, in the text using the same line of code as give
-
NOT with reference to PO for credit memo/invoice after invoice is posted
hi, invoice is posted then vendor come back with correction. 1) if i create credit memo NOT with reference to PO then the treatment is not similar to subsequent credit? 2) if i create invoice NOT with reference to PO then the treatment is not similar
-
Toptimizer app not working in ISO 8 why?
I Have recently upgraded to ISO 8 on my iPhone 4s and can no longer use the app toptimizer with scanning. What is wrong? I can enter the vin number manually but it will not take the picture or scan the vin?