How to Batch edit fields in IPTC Core under Inspector's Metadata tab?

Hi guys,
For some reason there is erroneous info in some of the fields and I cannot remember how it got there - therefore I don't know how to batch edit it out.
Can you help? I tried everything at the Apple store with a trainer by my side but we could not find a way to do it.
Thanks,
Raphael

Are you familiar with the batch change command (cmd-shift-b)?
You'll be given the option to create a new metadata preset. Pick the IPTC fields that you need to change.
Be careful with the "Append" vs. "Replace" option!
—Andreas

Similar Messages

How to read Editable field in a table

Dear friends,
i have a table with 5 columns( one column is editable field ( Amount column)) pls check the below screen shot, , its binded with an internal table , now i want to edit the amount columns ( for eg 100 ), could any one pls let me know how to capture the editable value ( ie 100 ), when i am trying to read amount field , i am getting the old value ( ie 15,000),
Thanks
Vijaya

Hi Laxmi,
I am able to read the values before edited and after editing. Code i have written is in the ONENTER action method. I have simply read the Table node values.
1. Applicaiton data
2. Values In Debugging mode by clicking on Enter button on the second row.
3. Edit second value and click on Enter
Regards,
Ravikiran.K

How to protect editable field through system user name?

Case:
3 editable fields.
3 groups.
Each field must be filled by one person of each group.
Question:
If the field is edited, only the person who edited the field may change it. Is this possible in an editable Acrobat document?
Thx for helping!

I suppose that JavaScript could do this. But there are other ways depending on your workflow.
Is each person going to download the PDF from a central file? Will each person have full Acrobat, not Reader? If so, each person could assign a security setting to the file.
Is it vital that one person not be able to change another's answer? Or is it just a common courtesy that you don't want that form field changed? If so, just have that person change the status of the field to read only.

How to get editable fields in PDF

Hi,
I have created a form using SFP transaction as below :
Name AAA
Roll No 10
I have created two text fields as Name and Roll No, when I run this form then I selects Print Preview option and it will display the values AAA and 10 respectively. But I am not able to edit these values.
Can anyone tell me how I can make them editable. Please help me.
Regards
Deep

The structure SFPDOCPARAMS contains a flag FILLABLE, which needs to be activated in your program.
Be aware that in SFP there is only an automatic conversion from ABAP structures to the XML in PDF, but no out-of-the-box conversion from XML back to ABAP - which is what you normally need in the interactive scenario. Use the forms integration into the Web Dynpro framework, as this framework provides the transformation both ways.
Best regards,
Markus Meisl
SAP NetWeaver Product Management

How to use Editable Fields in ALV

Hi,
i am using alv with checkbox at extream right and one field date which is editable.
now i am executing program,selecing the checkbox and changing the date.
i want to store the new value of the date field of the selected row in the internal table.
anyone can tell me how can i store the new value of date field of the selected rows in the internal table.
Thanks in advance.
Chintan

Hi Chintan,
Please check this code:
there is sample code for it...
REPORT ZTESTDFALV1                             .
*Data Declaration
DATA: BEGIN OF T_EKKO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
FLAG TYPE C,
HANDLE_STYLE TYPE LVC_T_STYL,
END OF T_EKKO.
DATA: GD_REPID LIKE SY-REPID, "Exists
REF_GRID TYPE REF TO CL_GUI_ALV_GRID. "new
DATA: BEGIN OF IT_EKKO OCCURS 0.
        INCLUDE STRUCTURE T_EKKO.
DATA: END OF IT_EKKO.
DATA: BEGIN OF IT_BACKUP OCCURS 0.
        INCLUDE STRUCTURE T_EKKO.
DATA: END OF IT_BACKUP.
*ALV data declarations
TYPE-POOLS: SLIS.                                 "ALV Declarations
DATA: FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_LAYOUT    TYPE SLIS_LAYOUT_ALV.
*Start-of-selection.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
IT_BACKUP[] = IT_EKKO[].
PERFORM DISPLAY_ALV_REPORT.
*&      Form build_fieldcatalog
      text
FORM BUILD_FIELDCATALOG.
REFRESH FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'EBELN'.
FIELDCATALOG-SELTEXT_M   = 'Purchase Order'.
FIELDCATALOG-INPUT     = 'X'.
FIELDCATALOG-EDIT     = 'X'.
FIELDCATALOG-COL_POS     = 2.
APPEND FIELDCATALOG.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME   = 'EBELP'.
FIELDCATALOG-SELTEXT_M   = 'PO Item'.
FIELDCATALOG-COL_POS     = 3.
APPEND FIELDCATALOG.
CLEAR FIELDCATALOG.
ENDFORM.                    " BUILD_FIELDCATALOG
*&      Form BUILD_LAYOUT
      Build layout for ALV grid report
FORM BUILD_LAYOUT.
"Permet d'ajuster les colonnes au text
gd_layout-colwidth_optimize = 'X'.
GD_LAYOUT-TOTALS_TEXT       = 'Totals'(201).
gd_layout-box_fieldname = 'SELECT'.
gd_layout-box_tabname   = 'IT_EKKO'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form DISPLAY_ALV_REPORT
      Display report using ALV grid
FORM DISPLAY_ALV_REPORT .
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM        = GD_REPID
           i_callback_top_of_page   = 'TOP-OF-PAGE'
            I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
            I_CALLBACK_USER_COMMAND   = 'USER_COMMAND'
           i_grid_title             = 'My Title'
            IS_LAYOUT                 = GD_LAYOUT
            IT_FIELDCAT               = FIELDCATALOG[]
       TABLES
            T_OUTTAB                  = IT_EKKO
       EXCEPTIONS
            PROGRAM_ERROR             = 1
            OTHERS                    = 2.
IF SY-SUBRC <> 0.
    WRITE:/ SY-SUBRC.
ENDIF.
ENDFORM.                    " DISPLAY_ALV_REPORT
*&      Form DATA_RETRIEVAL
      Retrieve data form EKPO table and populate itab it_ekko
FORM DATA_RETRIEVAL.
SELECT EBELN EBELP
   UP TO 10 ROWS
    FROM EKPO
    INTO CORRESPONDING FIELDS OF TABLE IT_EKKO.
ENDFORM.                    " DATA_RETRIEVAL
                     FORM SET_PF_STATUS                              *
FORM SET_PF_STATUS USING RT_EXTAB   TYPE SLIS_T_EXTAB.
SET PF-STATUS 'STANDARD_FULLSCREEN1' EXCLUDING RT_EXTAB.
ENDFORM.                    "set_pf_status
*&      Form user_command
      text
     -->R_UCOMM    text
     -->RS_SELFIELDtext
FORM USER_COMMAND USING R_UCOMM LIKE SY-UCOMM
                         RS_SELFIELD TYPE SLIS_SELFIELD.
*then insert the following code in your USER_COMMAND routine...
IF REF_GRID IS INITIAL.
    CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
      IMPORTING
        E_GRID = REF_GRID.
ENDIF.
IF NOT REF_GRID IS INITIAL.
    CALL METHOD REF_GRID->CHECK_CHANGED_DATA
ENDIF.
*modify
CASE R_UCOMM.
    WHEN '&IC1'.
      CHECK RS_SELFIELD-TABINDEX > 0.
      IF RS_SELFIELD-VALUE EQ '6000000001'.
        CALL TRANSACTION 'ZDF2'.
      ENDIF.
    WHEN 'REFRESH'.
      READ TABLE IT_EKKO INDEX RS_SELFIELD-TABINDEX.
      IF SY-SUBRC = 0.
        READ TABLE IT_BACKUP INDEX RS_SELFIELD-TABINDEX.
        IF SY-SUBRC = 0.
          IF IT_EKKO <> IT_BACKUP.
then do your check
          ENDIF.
        ENDIF.
      ENDIF.
      PERFORM DATA_RETRIEVAL.
      RS_SELFIELD-REFRESH = 'X'.
ENDCASE.
ENDFORM.                    "user_command
and also check this thread in which i gave the solution....
REUSE_ALV_GRID EDITABLE
This should help u out...
Mark useful answers...

How to validate editable field in ALV

Hi All,
I have a alv program using OOPS concept where two fields(columns) are editable in the alv output. These two columns contain table names and field names which can be edited.
I just want to validate these table and field names when we press the save button. If the edited entry is valid,i.e., the tablename is existing in the database, then it must update the entered value oftbl name to the db. else it shud give a error msg.
Please help with this code.
Thanks in Advance.

Hey!!!
Try using this...
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
    METHODS : handle_data_changed FOR EVENT data_changed
                                  OF cl_gui_alv_grid
                                  IMPORTING er_data_changed.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_data_changed.
    PERFORM data_changed USING er_data_changed.
ENDMETHOD.
ENDCLASS.
form DATA_CHANGED using p_er_data_changed
                         TYPE REF TO cl_alv_changed_data_protocol.
DATA : ls_mod_cells TYPE lvc_s_modi,
               declare a variable for your table or field name.
LOOP AT p_er_data_changed->mt_good_cells INTO ls_mod_cells.
      CASE ls_mod_cells-fieldname.
      WHEN 'LIFNR'.
          CALL METHOD p_er_data_changed->get_cell_value
          EXPORTING
            i_row_id    = ls_mod_cells-row_id
            i_fieldname = 'LIFNR'
          IMPORTING
            e_value     = The variable you have defined.
put ur condition according to variable here, if the condition is not satisfied, then throw a message like this.
        CALL METHOD p_er_data_changed->add_protocol_entry
            EXPORTING
              i_msgid     = 'ZFI'
              i_msgno     = '999'
              i_msgty     = 'E'
              i_msgv1     = 'Employee Number Doesn''t Exist'
              i_fieldname = ls_mod_cells-fieldname
              i_row_id    = ls_mod_cells-row_id.
          EXIT.
        ENDIF.
Hope this helps.
Regrds,
Abhinab Mishra

How to add EDITABLE fields to PDF format?

Hi All
There is new functionality in SAP, through which we can have EDITABLE fileds PDF form in SAP. It is a new technology which SAP is providing. Can any one explain how this works with SAP?
Thanks
Aleem

Hi Aleem .
salaam.
jus snd ur mail -id.
i have a document, i vil snd it uuuu.
its a long process, so its nt posible 2 explain evertytin,
so snd ur mail id, i vil snd a documenmt with SNAP-SHOT
that vil b more helpful 2 u.
Reward if its useful

How to batch edit...adding text(company logo)

I would like to add my company name (logo) to my images before posting them to the internet, but is there a quicker way than to open each file and add the text to each indiviual image...like even to save it as a selection that i could open or something ???...oh yeah, i have cs4
thanks

You can use batch comand or image processor in Bridge. I believe in CS4 it was moved to Output.

Editable fields in PDF type of forms

Hi Gurus
In ECC 6.0 there is new functionality on PDF forms, as how to create editable fields in the PDF forms. Can any body explain me how this can be done or any document related to this will be really helpful..
If anybody has document on this, can you please send to [email protected]
Thank you very much
Aleem

Hi aleem,
check this link
/people/markus.meisl/blog/2006/12/22/a-pdf-form-or-not-a-pdf-form--that-is-the-often-the-question

Filtering on IPTC Core

Hi guys,
Is it possible to customise the filter eg. to use any of the IPTC Core fields? or is it possible to search for specific fields in IPTC Core? Can the filter categories (filter pane -> icon top right) be modified? I don't use the ones listed. Can the search criteria list be modified?
Specifically, I've been hoping to use the Country field of IPTC Core and then filter by it; but if this can't be done I could start putting countries in as keywords?
The nearest I've found is to use the All Metadata criteria in Search.
Ben

yeah, thanks Curt. It seems that way.
Similarly, I note that only some fields are available in the thumbnail view, and some of the IPTC Core metadata could be useful here too.

Batch editing of iCal events

Hello, does anyone know how to batch edit multiple events in iCal?
Here is my senario. I have a new phone that I can sync with iCal but it does not understand all-day events. All other events sync without any issues. No problem, I will just change all-day events to a specific time. But the problem is that I have several calendars with a lot of reoccuring all-day events.
How can I change all of these to say midnight or two am or whatever? I looked through the stock and 3rd party automator actions but they pretty much just have searching, filtering or deleting, no batch editing.
Anyone have any applescripts that can do this?
Thanks!

Try this. Note IT HAS NOT BEEN TESTED so backup your calendars first. I think just changing from all day will give the events a start time, but if not you will need to set the start time as well.
AK
click here to open this script in your editor<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #222; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tell application "iCal"
set TheEvents to every event of every calendar where (allday event of it is true) and (recurrence of it is not "")
repeat with ThisEventList in TheEvents
if ThisEventList is not missing value then
repeat with ThisEvent in ThisEventList
set allday event of ThisEvent to false
end repeat
end if
end repeat
end tell</pre>

Metadata changes and batch editing

Has anyone figured out how to batch edit the photos in your library or change the metadata? Everything is very organized by date and location and if this information is wrong from older photos it REALLY throws everything off. Any suggestions?
Thanks guys for your help!

See this post by léonie:
léonieApr 8, 2015 3:06 PM
Re: can I no longer batch edit photo meta data?!in response to Nickholl
You can select several photos at once and add keywords, but not the same title to several photos at once.
You can copy the adjustments from one photo to all selected photos.
You can adjust the time of several selected photos at once.
But that's it
It is one more reason to keep iPhoto ready to prepare photos before importing to photos.

Batch number field in Handling Unit detail (VT01N) is not editable

Hi, Does anyone know how to turn the batch number field (screen field HUMV4-CHARG in program SAPLV51G screen 6410) editable?
Right now, it is not allow us to specify the batch for delivery line item if there are multiple batches for the same line item when the item is packed into a handling unit.
The batch number is in the delivery table but it will not come into the shipment table when the delivery is added to the shipment, nor the field is editable for user input.
Please help!
Thank you,
Minami

HI,
If you are doing online check for userexits/customer exits....
For userexits u can check in the subroutines node in se80(Program->SAPMV50A)....Please check the same.
for customer exits ->SMOD->F4 help->Specify the package as 'VL' and see the ehnacements and then the funtion exits.
Regards,
Nagaraj

IPTC Core metadata fields lost with PNGs

Hi there,
I have a TIF file which contains data in the IPTC core fields. Converting the TIF to a JPEG will retain most of the fields and can be viewed still in Adobe Bridge.
However, converting to a PNG will lose all of the data. The only way it seems to retain metadata is to set options on the Save to Web options in Photoshop, which doesn't really work too good with a 100mb TIF being converted.
Resampling to PNG in ImageMagick and then reading in Bridge has the same issue, even though 8BIN and IPTC profiles are actually embedded into the file.
Does Bridge support IPTC core metadata for PNG files?
Many thanks!

They've confirmed the same thing i've found, that Save For Web actually preserves a chunk of the IPTC core data, but this isn't really any good for the quality of image I need to save.
It's strange how the XMP preserve option isn't available for a standard PNG save.

Editing IPTC core 16 bit images

Does bridge CS3 support editing the IPTC core on 16 bit images? I've been working with a photographer that has a 16bit work flow and I noticed that the IPTC fields of the 16bit files are not populated nor can they be edited.
If you look at the file info in PS everything is there and can be edited.
I'd also like to know if the data fields of the "metadata" tab from PS is accessible from bridge. I can't seem to find the fields that correspond to that pane. These images are for Getty submissions so the Keywords and release status are critical.
Thanks
Brian

Strange
If you can add metadata to the IPTC fields in PSCS you must see them in Bridge and also should you be able to edit the fields that have the pencil icon at the end in the metadata panel.
To be sure could you try to develop and save a raw file from your own production in ACR using the 16 bit option and see if you can edit this files at the desired places?
If this is also not possible you could try the purge cache for folder option via the tools menu and even the reset preferences for Bridge option with restarting it while holding down the option key and choose refresh preferences.

How to Batch edit fields in IPTC Core under Inspector's Metadata tab?

Similar Messages

Maybe you are looking for