How to bind data from BEx Query to BO Dashboard

Hi
Could someone please share screenshot steps how to bind BEx Query data into BO Dashboard.
We've created BICS Connection .....
It will be helpful if someone can share screenshots of building small Dashboard on BO Dashboard.
Thanks,

Hi Pawan,
Please find the below links, there are many links to this in SCN search there before posting you could save lot of your time.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/a01a9a87-936f-2f10-e6b9-dbb1ec5064ff&overridelayout=true
http://scn.sap.com/docs/DOC-47314
Thanks&Regards,
Krishna

Similar Messages

Binding data from BEx query to Google Maps

I have been able to create the SDK and install the Extension. I can see the Custom Components. I have added a BEx Data Source with Location and values. I have bound the source to the component, identified the Address Dimensionand and the Red Markers field. When I run it, my data is not diisplayed.
To utilize this Extension, do you have to write extra code? I have been searching everywhere and I am not finding any assistance.
Thank you,
Roger

I haven't tried this myself yet - but did you register your Google API key? Please see Google Maps in SDK Extension

Facing prolem in Dashboard 4.1, while fetching data from Bex Query

Hi Exports,
I am facing an error message " Failed to (de-)serialise data. (Xsl 000004)" while fetching data in Dashboard from Bex Query.
The query is getting connect. while drag n drop some dimensions and measures then going for Refesh or Run Query, geting this error.
The same query is working fine with other comp like webi n crystal.
Anybody having solution for this please let me know. I am stuck somewhere.
Thank You

Hi,
Check the data in the infoProvider.Reduce the Bex query Characteristics & Key figure fields.Try to identify due to which characteristsic adding in Bex Query ,are you facing the issue.Check that characteristic data in the infoProvider.
Regards,
Venkat

How to refresh report data from bex query (BW) with parameters

Hello,
i hope someone can help me with my problem. I developed an desktop application, which loads (actual state) a report from the local file system. After setting the parameters, the report should be saved as a pdf file. Loading the report into the ReportDocument object and exporting the report to a pdf works fine. Setting parameters (without) a data source too. But now i can't refresh the data in the reports given by a parameter (e.g. time).
I know there are two methods to do this. Push and pull. I want to use the pull method, cause my program should exports different reports and i think it should be easier to handle this with this method.
On my development environment is installed:
Crystal Reports SP 4
MS Visual Studio 2010 (coding with C# .NET)
.NET Framework 4
SAP Integration Kit
Crystal Reports for Visual Studio 2010 SP1 - SDK libraries
Crystal Reports for Visual Studio 2010 SP1 - Runtime 32 bit
SAP GUI 7.20 (Compilation 3)
The bex query is enabled for external use from ole db for olap. Do i have forget something else?
Here is a part of my code:
        public ReportDocument doPullMethod(ReportDocument crReportDocument)
            TableLogOnInfo crTableLogOnInfo = crReportDocument.Database.Tables[0].LogOnInfo;
            ConnectionInfo crConnectionInfo = crTableLogOnInfo.ConnectionInfo;
            crConnectionInfo.Password = "*******";
            crReportDocument.SetDatabaseLogon(crConnectionInfo.UserID, crConnectionInfo.Password, crConnectionInfo.ServerName, crConnectionInfo.DatabaseName);
            MessageBox.Show(crConnectionInfo.UserID + " _ " + crConnectionInfo.Password + " _ " + crConnectionInfo.ServerName + " _ " + crConnectionInfo.DatabaseName);
            for (int i = 0; i < crReportDocument.Database.Tables.Count; i++)
            //    crReportDocument.Database.Tables<i>.ApplyLogOnInfo(crTableLogOnInfo);
                MessageBox.Show("TestConnectivity: " + crReportDocument.Database.Tables<i>.TestConnectivity());
            return crReportDocument;
Cause i'm using only one bex query, i know that the SetDatabaseLogon()-method should bring me the same result as the ApplyLogOnInfo()-method SAP Crystal Reports .NET API Guide
Exists an order which i have to follow? First setting parameter and then set the login informations or backwards? Cause i also get the "Failed to load database information" exception, when i set a parameter and TestConnectivity() returns false.
Do i have to activate the data refresh manually or will be the data refreshed automatically on export?
I searched in this forum (.NET - SAP Crystal Reports) and found only this thread which according to my problem:
[Re: Crystal report connects to BW RFC by .NET;
The question is assumed answered.

Hi Robin,
There is a SAP Integration Kit you need to allow CR to connect to SAP data sources. There isn't one for CR for VS 2010 and I don't believe there are the various extra options available in the SDK, no SDK access to the DB driver.
Possibly, Check the other post, download and run the app Ludek suggested, it will get the connection info for your report using RAS and then plug the output code into your code and see if that works. It should show the crdb_olap dll is the database driver, assuming that is the connection method you used when designing the report.
Pay attention to the database dll in the output from that app and verify it is on your PC in: C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86
If that doesn't work then.....
The problem is, CR for VS 2010 ( version 13 ) is the runtime for BOE 4.0 ( version 14 ) which includes the Integration kit drivers on install. There is no standalone install of the database drivers. They are installed with CR 2011, which doesn't have a SDK included, CR for VS 2010 is also the Developer version for CR 2011.
Because of the "custom" connection requirements there is no SDK or access to the BW datasource extra options....
Also note that CR 2008 is not supported in VS 2010, it should work though as long as you stick to 2.0 -> 3.5 framework, no 4.0 Framework support in CR 2008 or BOE 4.0
You may want to try the SAP Integration Kit forum to see if anyone has been able to make this work or contact your account manager to verify if there are any plans to do what you are doing....
Don

How to buld Crystal report using data from Bex query

Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,
Chandra

Hi Chandra,
Here is the docuemnt which explains you in detail about the steps to create Cyrstal Report using BEX Query.
https://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/004aacbb-4983-2b10-8da7-cdff5dcbb948&overridelayout=true
/people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
Regards
SIndhu

Hi, how to set date in bex query.

hi
experts
i need do display date and name in my bex query.

Hi,
I hope it is not possible in BeX Query designer but it is possible in WAD by using Text elements:
http://help.sap.com/saphelp_nw04/helpdata/en/9f/4e9d39d44cd45ee10000000a11402f/frameset.htm
With rgds,
Anil Kumar Sharma .P

HELP! How to make RRI from BEX query into Workbook with one report???

How to make RRI from query into Workbook???

Hi Alex,
A workbook is a set format of queries, so when you try to jump to another query , you will definitely open another session and hence another excel file. This is the same for web templates also though you have an option of opening the new result in the same window.
You would have to use some macros and open the query on the same page. A RRI is a query jump and not a drill down . A drill down would be getting more of the dimensions into the query.
Regards
CSM Reddy

How to load data from a query?

Hi all,
I'm not very familiar with ODI, but we already use it to load table (to Hyperion Planning).
Now, we need to execute a query (I don't want only to apply filter), that cross differents table, to load it. We can't create view in the datawarehouse.
How can I do this? What is your recommendation?
Thanks for your help

Yes, this is possible.
Start with a single query that returns you the data for all lecturers.
Right-click on the "all lecturers" query in the queries pane, and choose Reference, once for each lecturer. This will create a query for each lecturer.
Open the query for each lecturer and filter the data so that only that lecturer's results are visible.
Click "Close & Load To..." for each lecturer's query to load the data into the data model. This will create a data model table for each lecturer.
If your question is more about how to transform such a survey list into a table that can be easily filtered, please provide an example of how the list shows up in Power Query.
Ehren

How to bind data from script created variable to embed element of XML schema (xsd) in "Data View"

Hi, i have got another problem with livecycle designer scripting.
I have got script line which is defining of string variable:
var aaa = "this is my string";
and i have got embed XML schema like this (it`s only short part of whole file):
... xs:element name="bbb" type="xs:string"/ ...
After saving data to XML i would like to get "this is my string" as a value of my "bbb" XML element.
To save this data i`m using submit button which is connect with submit.php file on my server.
How to connect script created variable and embed XML schema element which is present on my "Data View" tab.
Please help me a bit becouse i don`t know even where to search answer of it...
Of course i know possibilities to create fake unvisible text field object and bind it with 'bbb' and than put "this.rawValue = aaa" to connect those two variables but i think that is not a good idea to solve it in that way. It`s too primitive

i solve it, i should write this:
xfa.datasets.data.bbb.value = aaa;

How to bind data (from database) to the Dictionary structure in Web Dynpro

Hi,
I am getting Hashtable object from the database related classes and I want to bind this data to the Dictionary field in Web Dynpro. So, I can bind this Dictionary field type to the Context variable.
Please let me know the detailed procedure.
Thanks
Tatayya M

Tatayya,
Look at this sample tutorial , It will defintely help you with the Data Dictionary .
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/bad3e990-0201-0010-3985-fa0936d901b4
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/38650ecd-0401-0010-10a0-f9d8fd37edee

How to create documentation from BEx query

Hi,
I would like create documentation for each query,so that end user can get idea about particular query.
But I can see some documentaion from context menu(right click)->Goto->Display documentation.
Any tips???? Points will be given.
Thanks in Advance.
Regards,
Jaheer,Yanbu,Saudi arabia.

HI Jaheer,
Go to www.help.sap.com
Select NetWeaver -> Select BI Content
In the left hand panel select your appliacion components (for Example:
Human Resource - > Recuitment -> Queries -> select any one query)
It will disply Technical name, Based on the InfoCube, Use and what are the
Free characteristics, characteristics, Keyfigures etc.
Now Create one Excel Sheet.
and create your document and show to your client.
If your client wants sample preview, then copy this query and check in the
BEx analyser. cut and copy that preview in your Excel sheet.
Then the Document looks beautiful...
Have a nice Day...
Thanks
Rajesh

How to bind data from odata to the ui5 table .

HI ,
Can anybody help to bind Odata service to the ui5 table in eclipse .
This is my code.

Check this
http://baigsorcl.blogspot.com/2010/03/creating-master-detail-form-in-adf.html
http://baigsorcl.blogspot.com/2010/03/moving-to-jdeveloper11g-your-first-adf.html
@John now you won :D

How to compare result from sql query with data writen in html input tag?

how to compare result
from sql query with data
writen in html input tag?
I need to compare
user and password in html form
with all user and password in database
how to do this?
or put the resulr from sql query
in array
please help me?

Hi dejani
first get the user name and password enter by the user
using
String sUsername=request.getParameter("name of the textfield");
String sPassword=request.getParameter("name of the textfield");
after executeQuery() statement
int exist=0;
while(rs.next())
String sUserId= rs.getString("username");
String sPass_wd= rs.getString("password");
if(sUserId.equals(sUsername) && sPass_wd.equals(sPassword))
exist=1;
if(exist==1)
out.println("user exist");
else
out.println("not exist");

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

How to access listbox binding data from a button which is not part of listbox in xaml page

Hi
I have the below listbox and its bdining as below
<ListBox x:Name="listMyPosts" ItemsSource="{Binding Path=MyPostsDataSource}" Grid.Row="0" >
           <ListBox.ItemTemplate >
                      <DataTemplate >
                                    <StackPanel Orientation="Horizontal">
                                        <TextBlock Text="{Binding
NewPostText ,Mode=TwoWay}"/>
                                        <TextBlock Text="{Binding
NewPostSender}"/>
                                    </StackPanel>
                            </DataTemplate>
            </ListBox.ItemTemplate>
           <Button content="Send Post" command ="Binding SendClickCommand} />
</ListBox>
And i am assining postsViewmodel
private PostsViewModel _PostsViewModel ;
public Conversation()
InitializeComponent();
_PostsViewModel = new PostsViewModel ();
this.DataContext = _PostsViewModel ;
public ObservableCollection<PostsModel> MyPostsDataSource
get
if (_MyPostsDataSource== null)
_MyPostsDataSource= GetMyPosts();
return _MyPostsDataSource;
set
this._MyPostsDataSource = value;
RaisePropertyChanged("MyPostsDataSource");
is that possible to access listbox binding data from the ViewModel's SendClickCommand property ?
Krrishna

If you need to pass to the command selected item, try this
<Button Сontent="Send Post"
Сommand ="{Binding SendClickCommand}"
  CommandParameter={Binding ElementName=listMyPosts,
Path=SelectedItem}/>
msdn

How to bind data from BEx Query to BO Dashboard

Similar Messages

Maybe you are looking for