How to blur edges of clusters, tabs

I need to put Tabs, Clusters display in my interface.
However, the edges of each control/indicates make the interface look busy, I would like to hide/blur out the edges,to make all controls/indicates look like in the same flat surface.
Your response is highly appreciated.

First use Classic Controls, then pickup "transparent color" for both fore- and background colors to dye the control edges and panels. It works fine in my Labview.

Similar Messages

  • How do you create blurred edges in CS5?

    Hi there! How do you create blurred edges on a photo or a shape in Photoshop CS5? Thanks! .

    for shape one way:
    make shape
    blur>shape blur
    ok
    make the blur to your liking
    done
    you can do this to a photo if you wish. or mask a blur in with a mask on top of a photo layer
    http://graphicssoft.about.com/cs/photoshop/ht/apsvignette.htm
    janelle

  • I am new to this program and want to know how to blur the edges of a pic

    i am new to the program and want to know how to blur the edges of a pic?

    Another way...
    Use the Rectangular Marquee tool to draw out the edge to be blurred. Feather the selection. Here I feathered 50 px (note that feathering makes the borders of the selection appear rounded).
    Invert the selection so that the edge is now selected, and apply a Gaussian Blur:
    The reason for feathering is to soften the edge of the blur. The amount of feathering and amount of the Gaussian Blur is simply trial-and-error.

  • Cropping a photo as a circle with blurred edges

    Help!! I should know how to do this - in fact there used to a
    tutorial with it in I'm sure!! Can't find it though.
    I am trying to take a photo, crop it so that it is circular
    and blur the edges so I can insert in into a web page later using
    Dreamweaver. At the moment the target page is white, but I would
    like to be able to do this blurring into any baclground colour.
    I'm sure I have done it before (Maybe in Fireworks 4 - I am
    now using Fireworks MX) but I can't remember how - I can crop the
    picture by drawing a circle and using "paste inside" but I can't
    get the circle to detach from the "hidden" full picture and can't
    remember how to blur the edges.
    Help!!!

    Enscott wrote:
    > Help!! I should know how to do this - in fact there used
    to a tutorial with it
    > in I'm sure!! Can't find it though.
    Draw an ellipse on top of the photo and fill it with white.
    Change the
    edge property of the ellipse from Antialiased to Feather.
    Select both
    the image and the ellipse and choose Modify > Mask >
    Group as Mask. You
    will be able to adjust the fade off at the edge by adjusting
    the feather
    amount.
    The only way to export the image to fade into any background
    is to
    export it in 32-bit PNG format. Unfortunately, it will not
    display
    properly in Internet Explorer without first applying some
    proprietary
    markup called the Alpha Image Loader Filter. You can learn
    more about
    that here:
    http://www.playingwithfire.com/test/pngbehavior/demo.html
    Another option is to export it in SWF format and apply wmode
    transparency.
    http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_14201
    Linda Rathgeber [PVII] **Adobe Community Expert**
    http://www.projectseven.com
    Fireworks Newsgroup:
    news://forums.projectseven.com/fireworks/
    CSS Newsgroup: news://forums.projectseven.com/css/
    Design Aid Kits:
    http://www.webdevbiz.com/pwf/index.cfm

  • Blurred edges ("dream" like video)

    I'm editing a wedding video and the client wants a lot of the video to have the (somewhat) cheesy sepia tone, slo mo, blurred edges-- almost like the subject in the video is glowing... kind of reminds me of dream sequences seen on TV shows and movies. I can't figure out how to get that blurred/ dream-like look. Can anybody help?

    Do a google search for free Final Cut plugins. I'm pretty sure someone has a free glow or bloom or silk stocking filter. Eurkera had one at one time. There are probably others.

  • How can i print all the tab pages not just the first page (tab)

    how can i print all the tab pages not just the first page (tab)

    You would need to do this programmatically. Here's one way:
    Attachments:
    Example_VI_BD6.png ‏3 KB

  • I have Firefox 13.0. I have the homepage with the icons such as history, but I do not have the updated tabs.How do I get the updated tabs? Thanks.

    I have just updated to Firefox 13.0. I have the AVG Secure Search on my browser or whatever it is that is where the search engines and refresh, and bookmarks icons are located. Even though on my add ons page it says it is disabled. But obviously it isn't because it still works. I have removed AVG Secure Search from the list of search engines in the drop down list in the search bar, but this did not solve the problem with my tabs. The Firefox website says that my Firefox is up to date, but if it is up to date why do I still have the same old tab page when I open a new tab? When I click on the plus sign to get a new tab, it takes me to about:Tabs and says on the screen "You've opened a new tab." Then it has a search bar and a button next to it that says "Web Search!" Then it goes on to say "With Tabs You Can..." So, how do I change my current tabs to the updated Firefox tabs with icons of the my recent tabs and websites I regularly visit. Also can you please provide detailed step by step ways to solve this problem. Thanks.

    You only see items on the about:newtab page if the history is enabled and the browsing cache is working (stores thumbnails).
    *Tools > Options > Privacy > Firefox will: "Use custom settings for history"
    *http://kb.mozillazine.org/Viewing_the_browsing_history_-_Firefox
    You can check the current cache usage on the about:cache page and in Tools > Options > Advanced > Network > Offline Storage.

  • On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?

    On Firefox 4, how can I put one "new tab" on the "tab bar" (The + sign) and one next to the "back/forward" buttons (as in FF 3.6)?
    In my current Firefox, the "new tab" icon/item from the "customize" pop-up window menu of items is placed next to my home, back, forward buttons near the top-left of my header (Button 1 for "new tab"). Then, the tab bar automatically come with a small tab (with a + sign) to the right of your last tab opened (so you click on + and a new tab opens. Button 2 for "new tab"). I like to have this "new tab" button twice (as a + mini tab, and next to my "home icon".
    When I upgraded to Firefox 4, I seemed to be only able to "customize" or use the "new tab" in one place. Either as an icon next to home button, or as a "+ minitab", but NOT both.
    What can I do to put this button in Firefox 4 on BOTH places???
    Your help is really appreciated. I want to upgrade, but I want my buttons on both places...
    I upgraded to FF 4, but downgraded again just because this feature... that's just me of coarse :-)

    *New tab toolbar button: https://addons.mozilla.org/firefox/addon/new-tab-toolbar-button/

  • How do I import Map Info Tab files into Spatial for a map of europe?

    How do I import Map Info Tab files into Spatial for a map of europe via FME and have oracle spatial draw the map without problems?
    So far I've got to the stage where I can import the data, spatially index it (in oracle 9i) and get my SVG (scaleable vector graphics) application to view the map.
    The problem is that countries that have more than one polygon (more than one row in the database) do not draw properly.
    When I view the Map Info tab file in the FME viewer I can see that the data is fine, but I can also see that some of the polygons used to draw a country are donugts and some aren't.
    This seems to cause a problem when I import the data into oracle spatial as I don't know if a row in the table needs to be inserted as an independent SDO_GEOMETRY or if it should form part of a larger SDO_GEOMETRY (as in 2 or more rows make up the polygon shape for a country).
    I have a feeling that I'm not using FME correctly, because at the moment I have to import the tab file into Oracle then re-insert the data into a spatially formatted table (one with a spatial index) - I get the impression that FME should do that for me but as I'm new to this I don't really know.
    Any Help welcome :|
    Tim

    Tim,
    MapInfo has a free utility called EasyLoader that allows you to upload a table directly to Oracle. EasyLoader creates the geometries and spatial index. You can download it free from http://www.mapinfo.com/products/download.cfm?ProductID=1044
    Andy Greis
    CompuTech Inc.

  • How do i get a new tab to open up with my home page after i click on the + at the end of the tab

    how do i get a new tab to open up with my home page after i click on the + at the end of the tab

    problem solved thak you Andy.c that was too easy and a fast reply i'm abit of an iliterate with these things

  • How do I make a new tab open all the say to the right, as it used to, instead of just to the LEFT of the last tab?

    I have 6 tabs set up and have become very accustomed to the position they’re in. When doing a specific task for my job, a 7th tab opens up. It has always opened all the way to the right. When I’m done reading the information it gives me, I just quickly “x” it out to return working. Yesterday I noticed that this 7th tab was not opening up all the way to the right. It was opening in the next-to-last position to the right. This might not seem like a problem, but when I go to close it, I’m so used to x-ing out the one to the far right, that I’ve been x-ing out a tab that I need.
    So the question: How can I get the new tab that opens to appear all the way on the right again? Again, this is not adding a new tab. If I add a new tab to search for something, it does open all the way to the right.
    == I rebooted my computer a few days ago...

    Type '''about:config''' in the URL bar and hit Enter.
    ''If you see the warning, you can confirm that you want to access that page.''
    Filter = '''browser.tabs.insertRelatedAfterCurrent'''
    Double-click that preference to change the value to '''''false'''''

  • How to show Primary_key in Column Tab - Oracle SQL Developer 2.1.1.64

    How to show Primary_key in Column Tab or It bug? i can not see. thank you for answer.

    This was removed for performance reasons, but a lot of us asked for it to go back in.
    Don't know if it is currently planned, so better request this at the SQL Developer Exchange, so other users can vote and add weight for possible sooner implementation.
    Regards,
    K.

  • How can I specify the default tab in a CHM Output?

    My company uses CHM-based help for some of its products. We build the CHM files from RoboHelp 9, and while these CHM files don't really have a full Index attached to them, the Index tab shows up in the output anyway. Unfortunately, we are suddenly seeing that when the CHM file is launched from our program, the Index tab is displayed by default. We'd rather have the Contents tab be the default look, especially considering that the Index does not exist.
    I have poked around into how you can specify a default tab for a CHM file, and the only information I have found suggests that using a CHM file creates a file (HH.dat) that specifies which tab should be displayed on a user-by-user basis, and that the last tab displayed when you close the CHM should be the first one displayed when you re-open it. While this is true if you open the CHM independent from the product, when you launch it from our program, it's all Index, all the time.
    So, my question is: How can I specify the default tab for a CHM file? Or, failing that, how can I excise the Index tab from my CHM output.

    Hi there
    This will be something up to your application developer to resolve. When s/he issues the call to open the CHM, there are parameters that may be used to always open with the desired tab "in front".
    Point your developer to the link below and advise that s/he is most likely interested in the section titled: Programming Tips.
    Click here to view
    Cheers... Rick
    Helpful and Handy Links
    RoboHelp Wish Form/Bug Reporting Form
    Begin learning RoboHelp HTML 7, 8 or 9 within the day!
    Adobe Certified RoboHelp HTML Training
    SorcerStone Blog
    RoboHelp eBooks

  • Left-click on firefox icon in taskbar shows a list of all tabs. how to just open to last tab?

    I use the tab grouping feature a lot. That means I have 100s of tabs open at any one time.
    The problem: once one switch between tab groups, the Firefox icon on the taskbar changes to what looks like multiple echoes of the Firefox icon. I guess it is supposed to represent multiple tab groups.
    Before Firefox 20 one could click on the Firefox icon on the taskbar, and Firefox would come up and show the last tab I have been working on.
    Since Firefox 20 a left-click on the Firefox icon on the taskbar now shows a tab list of 28+ seemingly random tabs. Many of them just says "Mozilla Firefox" instead of the website represented by that tab (because the tab was not accessed recently).
    To open Firefox to the last tab I have been working on is now a real chore. I now have to pick one of these 28+ tabs (which is 99% of the time the wrong tab), then switch to the correct tab group, and then find the tab I have been working on. It typically takes 5-10 clicks to get back to where I was before I minimized Firefox, or before Firefox lost the focus. (In the past I could simply click on the Firefox icon on the taskbar, and Firefox restored where I last left off.)
    How can I turn off the tab list that pops up when one left-click or hover the mouse over the Firefox icon on the taskbar? I would love to get the ability to minimize/restore Firefox back by clicking on the Firefox icon on the taskbar as it was in the past, not get a choice of random tabs.

    Okay, with a lack of replies here, here are some solutions I came up with:
    * Quit Firefox and restart it. It reduces the number of clicks to just two. It is even faster than wading through the list of tab groups and tabs to get back to the last tab I was working on.
    * Use Alt-Tab to switch between applications instead of clicking on the Firefox icon on the taskbar. I'll have to change my habits, as I'm used to clicking on the icon to toggle between applications, especially if one has many applications open. I typically have a dozen applications open at any time, and Alt-Tabbing through them all can be time-consuming.
    * I found nothing that seems related in the about:config screens, e.g. an option to turn off tab.list
    * Switch to Chrome.
    Anyone got better ideas or solutions?

  • How do I get the "Document" tab to appear in the toolbar?

    How do I get the "Document" tab to appear on the "Adobe Reader" toolbar?

    There is no way to add that. All changes to the Adobe Reader toolbar can be found here:
    View->Show/Hide/Toolbar items

Maybe you are looking for