How to bring up mulitpe connections through a terminal server

Ok, I have never been able to figure this out. I have a Cisco 2511 terminal server. Is there a way when using SecureCRT to bring up multiply devices going through the terminal server. What i keep doing is ctrl-shft-6-x but that's only going to be displayed on the same terminal window. I want to have multipe tabs open to the other devices. Other then putting a IP on all the devices and not using the terminal server while telneting I just can't seam to find a way. On videos like CBT nugget he goes through multipe tabs for his devices. I figued there has to be a way.

I believe that this approach should work:
- open a session with SecureCRT.
- telnet to the term server.
- use the term server to open a console session to one device.
- open a new tab in SecureCRT.
- in the new tabl telnet to the term server.
- use the term server to open a console session to another device.
- open a new tab in SecureCRT.
- in the new tab telnet to the term server.
- use the term server to open a console session to another device.
This approach should work up to the max number of vty that are configured. By default that would be 5. You may be able to configure additional vty and if so you should be able to have additional sessions to additional devices.
HTH
Rick

Similar Messages

How do I connect to a terminal server with my mac book pro

How do I connect to a terminal server with my mac book pro

Use the Remote Desktop icon on the tray and make sure to use the Fully Qualified Domain Name (FQDN) on the 'name of server' field. If that does not work then use the IP address to connect.

How do you give permissions to access a Terminal server?

How do you give permissions to access a Terminal server?

Refer : http://technet.microsoft.com/en-us/library/cc781509(v=ws.10).aspx
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.

Error connecting through a Relay Server

Hello, I have a native iOS application and I'm trying to connect this application to the SUP Server through a Relay Server.
Everything works fine when I connection the application without the Relay Server.
The application registers in the server, but a Synchronization error occurs after.
This is the error:
2014-06-06 10:25:24.629 OTMobile[236:907] [INFO] [CallBackHandler.m:289] ================================================
2014-06-06 10:25:24.631 OTMobile[236:907] [INFO] [CallBackHandler.m:290] SYNCHRONIZATION FAILED
2014-06-06 10:25:24.632 OTMobile[236:907] [INFO] [CallBackHandler.m:291] =================================================
The connection parameters:
SUPConnectionProperties *supConnectionProperties = [SUPApplication connectionProperties];
[supConnectionProperties setServerName:kHostName];
[supConnectionProperties setPortNumber:80];
[supConnectionProperties setNetworkProtocol:@"http"];
[supConnectionProperties setFarmId:@"srv.msg"];
[supConnectionProperties setUrlSuffix:@"/ias_relay_server/client/rs_client.dll"];
SUPLoginCredentials *supLoginCredentials = [SUPLoginCredentials getInstance];
[supLoginCredentials setUsername:[self username]];
[supLoginCredentials setPassword:[self password]];
[supConnectionProperties setLoginCredentials:supLoginCredentials];
SUPConnectionProfile *supSynchronizationProfile = [OTMobileOTMobileDB getSynchronizationProfile];
[supSynchronizationProfile setServerName:kHostName];
[supSynchronizationProfile setNetworkProtocol:@"http"];
[supSynchronizationProfile setPortNumber:80];
[supSynchronizationProfile setUser:[self username]];
[supSynchronizationProfile setPassword:[self password]];
[supSynchronizationProfile setAsyncReplay:NO];
[supSynchronizationProfile setNetworkStreamParams:@"/ias_relay_server/client/rs_client.dll/srv.rep"];
I attached some screenshots to help the understanding of the problem.
This one shows the outbound enablers running.
This one shows the properties of one of the Messaging Outbound Enablers.
This one shows the properties of one of the Replication Outbound Enablers.
Thanks!

Hi Alan,
Since you are getting error while synchronization that means sup registration is successful correct? Are you able to see registered user in SCC?
Did you also check sup server logs? (C:\sybase\unwired server\server\log)
I believe you will some relevant hints from here?
Meanwhile, can you look at below link:
http://scn.sap.com/community/developer-center/mobility-platform/blog/2014/01/27/how-to-connect-ios-device-to-relay-server
Rgrds,
JK

How do I create a connection string to sql server?

Hi All,
I am currently connecting to a SQL Server via ODBC DSN connection. I am wondering how do I create a connection string directly to a sql server without a DSN connection?
Thank you in advance.

If you have SQL Server or client installed in your machine you can directly connect to SQL server using native connection. When you create new report you can see the option create new connection, here you can see SQL Server. Expand it and enter the connection details where you will be directly connected to SQL Server without ODBC connection.
Regards,
Raghavendra

How to setup BPEL JNDI connection on the application server

Hi
Can anyone tell me how to write a JNDI connection for my BPEL process? Currently we are invoking all my BPEL processes from a property file, but i need to call my BPEL process thru JNDI connection. Is it possible? If yes then How?
Has anyone got any idea? Please let me know
BTW, you need more clarification on the question, let me know please.
Thanks.
Deepak

Hi Grafl,
Chk this link
Folder creation in AL11 using ABAP program
try this code.This works on UNIX servers
data: unixcom like rlgrap-filename.
data: begin of tabl occurs 500,
 line(400),
 end of tabl.
dir = unixcom = 'mkdir mydir'. "command to create dir
"to execute the unix command
call 'SYSTEM' id 'COMMAND' field unixcom
 id 'TAB' field tabl[].
Reward Points if Useful
Regards
Gokul

How take Branch offices backup centrally through DPM 2012 Server

Hi
I have one HQ and 200 branch offices. I want to take the backup of 200 branch offices centrally through DPM 2012 server.
To achieve this solution what procedure i have to follow. Shall i go with one DPM server at HQ or i have to configured each DPM server at branch offices.
I have 3 MBS link in each offices.
Thanks and Regards Deepak

I'm not sure there is a simple, easy answer. It depends on what you want to achieve via the DPM protection. My two cents is to have your DPM servers for the branch offices running at your HQ location so your backups are "offsite". This
will protect you in the event a branch office is lost. All protection elements except for BMR are pretty efficient with DPM and you can compress the traffic from your branch locations.
You can have multiple DPM servers at HQ and balance your server protection load across that farm.
You may want to have a DPM server at a branch location that protects some of your HQ servers to provide an offsite backup for HQ resources.
Be careful with BMR backups across WAN links. The BMR sends the entire BMR backup every time. And the BMR backup can include multiple drives if you happened to have installed applications on something other than the system drive (C:). You
can get a list of all the drives that will be included in the BMR backup by running this command on a server: "wbadmin start backup -allcritical -backuptarget:\\localhost\c$". Just hit CTRL-C after it shows you the drives that will be included.
You'll need to run the DPM backup across a private link or via site-to-site tunnels. I don't recommend trying to do a DPM backup with a firewall between the two sites. I'm sure it could be done...but I don't recommend it.
Rob

TP4 How to make an AppServer connection through a Firewall ?

In the Resource Manager we can not seem to find a way to modify the url to include http: ... Can someone point out some document on how to do this?

Chris Thanks for your reply. I am trying to do the following:
In the "application server navigator" under application servers I am attempting to make a connection to a JDev TP4 instance in stand alone mode that is behind a fire wall.
My understanding from the OC4J docs is have seen is I need to use a http port but in the connection manager I do not see a way to adapt the url to make a proper connection. Is this something that was just not taken into account ??? or am I just missing something here to make the connection. The help is of no use on this subject so I appreciate any assistance I can get.

Viewing "This PC" Devices and Drives when connected through a Terminal Services connection

Greetings, [long-time listener, first time caller]
I am a service technician who remotely logs into customer servers using terminal services. I am accessing systems around the globe. I regularly need to move files from my local system to the customer system, so I always connect with my local
(client) drives.
A feature of Windows Server 2012 R2 drives me insane. I use the good old "[Windows] + e" Shortcut to bring up the file explorer. It displays "This PC". It displays both the server's local volumes and \\tsclient\
volumes by name and also waits to display the information until it can get volume information from the terminal service drives.
The end result is that:
1) The Devices and Drives display is delayed by 5 to 10 seconds while it gets volume data for the network drives and
2) The drives I care about, the customer's local drives, are displayed AFTER the The Terminal Services drives AND Server-side removable storage.
Am I missing a way to display the networked devices separately? This is extremely annoying. It wastes my time and displays items illogically.
I know there are third party apps that can help (OldNewExplorer). But they are not an option for me.
[Modified on 2014.11.07] I have attached a screenshot of the way it looks in Windows Server 2012.
Thank you

Hi,
Thank you for posting in Windows Server Forum.
From your description it seems that local drive redirection is not working. For this please check whether drive redirection is enabled on server side and whether any group policy is not set to disallow the client drive redirection. Check on domain controller
that the 'Default Domain policy" - 'Do not allow drive redirection' was disabled.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

How to install Solaris 9 connected via Hyper Terminal

Hi All ,
We have planned to Install Solaris 9 in E250. We have connected the console throgh Hyper Terminal.
We are not able to see the options clearly in the console. The options are not in clear way. It is very difficult to install.
Please advice how to install Solaris 9 in Text mode and terminal type for installing the solaris 9 via Hyper Terminal.
I am awaiting for your reply.
Regards,
R. Rajesh Kannan.

When the install starts, select a terminal type of VT100
The screens should display correctly then.

Problem with socket connections through a proxy server.

People,
I set the system properties to use a proxy server so my application can fetch data from servers located outside my local network:
System.setProperty("socksProxyPort", port);
System.setProperty("socksProxyHost", proxy_addy);Then, when I attempt to stabilish a connection:
s = new Socket(this.getHost(), port);It hangs.
I appreciate any help since my available Java documentation is quite obscure regarding proxy servers.

Is the proxy on another machine? Try it's IP. If
not, replace 'proxy' with 'localhost'.
- SaishYes, it is another machine.
            byte x[] = {(byte)aaa,(byte)bbb,(byte)ccc,(byte)ddd};
            s = new Socket(new Proxy(Proxy.Type.SOCKS, new InetSocketAddress(InetAddress.getByAddress(x), 8080)));
            s.connect(new InetSocketAddress(this.getHost(), port));Again, it hung.

How to use JDBC to connect Tomcat with database server?(Urgent!)

I try to deploy the tomcat and make it connect with databaser server.
I am using mysql connector J 3.0. I added the CLASSPATH of mysql-connector-java-3.0.7-stable-bin.jar in the tomcat.sh .
I also add the web application in server.xml.
When I start tomcat, I can see using Classpath including mysql-connector-java-3.0.7-stable-bin.jar .
But when i browse my jsp including the jdbc, wait for a while, I get a message as following: Timeout on server localhost. My web server and database server is same computer.
Could you tell me what's wrong?

Did you check to see that the MySQL database was indeed up and running, and accepting connections when you started Tomcat? Did you make sure that your firewall permits connections to the database?
Timeout errors generally occur when you send a request to a server and the server does nothing with it - i.e., it doesn't respond to it in any way. Most firewalls are configured this way. If I telnet to your machine and I get "connection refused", I know your machine exists and I can try hacking into it. If I telnet and get nothing at all, then I will either assume either there's no actual machine at that address or it's unresponsive.

Redirector through a terminal server?

I have a handful of users current using a terminal server. Is there anyway to get the redirector working on it? Running XP clients and server 2003.
Thanks

I believe that this approach should work:
- open a session with SecureCRT.
- telnet to the term server.
- use the term server to open a console session to one device.
- open a new tab in SecureCRT.
- in the new tabl telnet to the term server.
- use the term server to open a console session to another device.
- open a new tab in SecureCRT.
- in the new tab telnet to the term server.
- use the term server to open a console session to another device.
This approach should work up to the max number of vty that are configured. By default that would be 5. You may be able to configure additional vty and if so you should be able to have additional sessions to additional devices.
HTH
Rick

WSA S160 Support for Terminal Servers (How are terminal server connections handled?)

We have a terminal server environment with a mixture of computers and laptops. Currently we have multiple proxy servers and would like to considate down to one. Our current solution does not work well in a terminal server environment. We are looking for a way to integrate all equipment with one soluton and I was curious as to how the S160 handled users connecting via a terminal server.

Edadios thanks for the response. I was reading over this document (see attached), and it looks to me like the connection would be tracked via a cookie surrogate. My bigger concern is that we are looking to be able to track usage per user even though they are on a terminal server. Our current solution (Barracuda) is not able to perform this function. I am hoping to have a S160 on site this week to do some testing but was hoping to gather some intel in the forums prior to implementation.
The response helps clear up what protocols are in use but I am still wondering how terminal server connections are handled by the WSA and if they are truly handled and tracked per user instead of by the device they are connecing to.

How to bring the data from application server to presentation server

hi,
i have one problem,i have written the program which will open the files in the application server when we run the program in the background(sm37),the same data from application server i want to bring into presentation server in the format of (.csv),how to bring the data from application to presentation server can any body help me on this topic.folowing is the code .
*& Report ZPFA_HIER_LOAD
REPORT ZFPA_HIER_LOAD.
*---- Declaration of Oracle connectioN
DATA con_name LIKE dbcon-con_name VALUE 'COMSHARE'.
DATA: MFL1(9),MFL2(5),MFL3(9),MFL4(2),MFL5(8) TYPE c.
DATA : mfilename type string.
data: begin of matab1 occurs 0,
 MFL1(9) TYPE C,
 MFL2(5) TYPE C,
 MFL3(9) TYPE C,
 MFL4(2) TYPE C,
 MFL5(8) TYPE C ,
 end of matab1 .
data: setid(8) type c.
data: begin of source occurs 0,
 setid(8) type c,
 end of source.
*PARAMETERS : p_pfile LIKE filename-FILEEXTERN.
*PARAMETERS : m_bsenty(8). " type c obligatory.
*mfilename = P_PFILE.
EXEC SQL.
SET CONNECTION :con_name
ENDEXEC.
EXEC SQL.
CONNECT TO :con_name
ENDEXEC.
EXEC SQL PERFORMING get_source.
SELECT set_id FROM UNIT_SET INTO
:setid
ORDER BY SET_ID
ENDEXEC.
start-of-selection.
LOOP AT SOURCE.
REFRESH matab1. CLEAR matab1.
EXEC SQL PERFORMING evaluate.
SELECT TO_CHAR(MEM_ID),TRIM(TO_CHAR(MEM_PID)) FROM UNIT_TREE INTO :MFL1,
:MFL5
where set_id = :SOURCE-SETID ORDER BY MEM_ID
ENDEXEC.
if SOURCE-SETID = '80000000'.
 mfilename = '/tmp/aesorg'.
elseif SOURCE-SETID = '80000006'.
 mfilename = '/tmp/Consolidation_Manager'.
elseif SOURCE-SETID = '80000010'.
 mfilename = '/tmp/10org'.
elseif SOURCE-SETID = '80000012'.
 mfilename = '/tmp/20org'.
elseif SOURCE-SETID = '80000018'.
 mfilename = '/tmp/30org'.
elseif SOURCE-SETID = '80000025'.
 mfilename = '/tmp/40org'.
Endif.
mfilename = '/usr/test.dat'.
************************This was i tried***********************
open dataset mfilename for output in text mode encoding default." IN
*TEXT MODE ENCODING DEFAULT.
if sy-subrc <> 0.
exit.
endif.
close dataset mfilename.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = MFILENAME
 FILETYPE = 'ASC'
 TABLES
 data_tab = matab1
 EXCEPTIONS
 file_write_error = 1
 invalid_type = 2
 no_authority = 3
 unknown_error = 4
 OTHERS = 10.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
clear matab1.
ENDLOOP.
loop at matab1 .
transfer matab1 to mfilename.
endloop.
close dataset mfilename.
 MFL5 = '0'.
 CLEAR MFL5.
FORM evaluate.
if MFL5 = -1.
 MFL5 = ''.
ENDIF.
concatenate MFL1 ',' into MFL1.
concatenate MFL1 ',' into MFL3.
matab1-MFL1 = MFL1.
matab1-MFL2 = 'ZBUE,'.
matab1-MFL3 = MFL3.
matab1-MFL4 = ' ,'.
matab1-MFL5 = MFL5.
append matab1 .
CLEAR MFL1.
CLEAR MFL2.
CLEAR MFL3.
CLEAR MFL4.
CLEAR MFL5.
ENDFORM.
 "evaluate
*& Form GET_SOURCE
 text
FORM GET_SOURCE.
source-setid = setid.
append source.
clear source.
ENDFORM. "GET_SOURCE

Hi Rammohan,
You cannot use OPEN DATASET to transfer data from application server to presentation server.
You can do the following :
Do 1st point in BACKGROUND
1. Read the data file from application server into an internal table using OPEN DATASET
Do 2nd point in Foreground
2. Once you get the data into an internal table, then use FM GUI_DOWNLOAD to download it on presentation server
You cannot use the above 2 point together in Background because its not possible. Hence you need program it partially in background and partially in foreground.
Best regards,
Prashant

How to bring up mulitpe connections through a terminal server

Similar Messages

Maybe you are looking for