How to setup BPEL JNDI connection on the application server

Hi
Can anyone tell me how to write a JNDI connection for my BPEL process? Currently we are invoking all my BPEL processes from a property file, but i need to call my BPEL process thru JNDI connection. Is it possible? If yes then How?
Has anyone got any idea? Please let me know
BTW, you need more clarification on the question, let me know please.
Thanks.
Deepak

Hi Grafl,
Chk this link
Folder creation in AL11 using ABAP program
try this code.This works on UNIX servers
data: unixcom like   rlgrap-filename.
data: begin of tabl occurs 500,       
        line(400),    
      end of tabl.
dir = unixcom = 'mkdir mydir'. "command to create dir
"to execute the unix command 
call 'SYSTEM' id 'COMMAND' field unixcom
                  id 'TAB' field tabl[].
<b>Reward Points if Useful</b>
Regards
Gokul

Similar Messages

  • "System cannot connect to the application server" (Admin Client only)

    Hello Experts,
    I have a strange issue: I am getting "system cannot connect to the application server" when I am trying to launch BPC Admin.
    I successfully connect to the same application server with Excel client on the same PC.
    I am able to connect via Admin from another PC.
    The installation in question is a new installation. The only difference between my PC and a troubled one is IE7 vs. IE8 - IE8 is the one giving issues.
    BPC site is in Local Intranet zone. Windows Authentication is enabled. What am I missing? Local Policy? IE8 settings? Folder permissions (I'm local admin on both PCs)?
    It's BPC 7.5 SP05.
    Thanks in advance,
    Akim
    P.S. OS: Windows Server 2003 SP2 32-bit (Citrix box).
    Edited by: Akim Zubarchuk on Mar 30, 2011 12:28 AM

    Hi Akim,
    Check client diagnostic for admin client can provide good information.
    Any way if you are able to connect with excel client not with admin client I will say:
    1. Check the rights of user used to connect with admin console
    2. Check proxy settings
    3. Disable antivorus or firewall into that computer.
    4. Make sure the installation of admin client was correct done.
    In my opinion it is a big probability to be point 3 or 4.
    Regards
    Sorin Radulescu

  • Applicaton Catalog - "Cannot connect to the application server" - Existing solutions have not worked

    Hi there,
    I have researched the problem below extensively online and found quite a varies array of solutions offered however they all seem to relate to the problem in that someone was setting up SCCM but couldn't get it to work. My situation is different in that the
    feature was working, no settings were changed however it has now stopped working.
    The issue is that if any user attempts to use the app catalog, they are shown the error screen which says "Cannot connect to the application server". It then says the problem might be temporary, try again later etc however it's not temporary.
    All the settings for the app catalog appear to be correct, as I would expect them to be as it was working (I am new to this company, the Desktop manager has told me it was working a few weeks ago).
    Does anyone know of a service in Windows, maybe something to do with the SQL side or certificates that could cause this issue? (although I checked certificates and again, looks fine). I'm almost at the point now of just restarting the server because
    if all else fails, turn it off and on again right?
    Cheers all.

    Hi, I just typed a long reply to this and then accidentally clicked a favourite on the Favourites bar and lost everything I typed :(
    -Checked the path in IIS to the \SMS_CCM\CMApplicationCatalog folder was OK and it was.
    -Checked that required .NET components including WCF are installed.
    -This one seemed a bit strange but ensured local service account has access to C:\Windows\Temp (this seemed very basic and unlikely but I tried it anyway due to desperation).
    -Checked that self-signed certificate was trusted by my PC attempting to access the App Catalog.
    -Checked SCCM services on the server are all running (where they should be, or set to manual as appropriate).
    I'm sure I've tried more than this, but these are the main things I can remember.
    Cheers.

  • Problem in Connecting to the application server

    Hi,
    I have used this JMS previously to connect to Sun Application Server PE 8 and it was working fine, but lately I installed Sun Application Server 9 (GlassFish) to my computer without removing the previous application server. I just changed all the classpath configuration pointing to the new application server instead of the old one. The previous application server is stopped and I mostly start the new application server without even starting the previous one. I also changed the folder name of the previous one, in case that something is pointing to that location.
    I created the ConnectionFactories and JMS destinations as I did before, and the code is the same, but unfortunately it is not working and it's giving me this error:
    com.sun.corba.ee.impl.transport.SocketOrChannelConnectionImpl <init>
    WARNING: "IOP00410201: (COMM_FAILURE) Connection failure: socketType: IIOP_CLEAR_TEXT; hostname: myhost; port: 3700" org.omg.CORBA.COMM_FAILURE:   vmcid: SUN  minor code: 201  completed: No
    at com.sun.corba.ee.impl.logging.ORBUtilSystemException.connectFailure(O
    RBUtilSystemException.java:2348)
    Is it important to remove the first application server completely ?
    Have you ever encountered to such a problem?
    Regards,

    Hi,
    I guess it is nothing to do with the previous application server existance.
    It seems this is a known problem some time back if you have a java version "1.5.0"
    Find more information
    at http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=5068014
    Regards
    Mandagiri

  • BDS: How do I save an attachement to the application server?

    Dear all
    I have following problem:
    We have certain attachements to an object in this case an XML file.  These attachements are viewable via the Business Document Navigator and can be exported manually in foreground from there.
    But how do I export (copy) it in background towards a directory on the application server?  I don't seem to find any function capable of doing that.
    So currently I'm thinking of reading the contents (via BDS_BUSINESSDOCUMENT_GET_TAB) and storing it myself via OPEN DATASET on the application server...  but if there would be a more general approach I would rather use that.
    Please advice!
    Thanks in advance!

    Hi,
    Please see below code:-
    [http://wiki.sdn.sap.com/wiki/display/HOME/Objectservicefilestoe-mail-(Canbeusedforcustomportal,workflow+applications)]
    Hope it helps you.
    Regards
    Abhii...

  • The system cannot connect to the Application Server

    Hello Everybody,
    I have a problem when connecting to my BPC Application.
    I get the following error when trying to open BPC:
    "The system cannot connect to the (http://xxxxxx) Application Server. Verify that you have specified a valid Application server name, or see if the  application  server is unavailable at this time."
    We have to reboot the application server to have acces again to the application.
    The osoft website was also unavailable.
    The server diagnosotic was OK.
    And when consulting the tblLogs table I found this message:
      ==============[System Error Tracing]==============
      [System  Name] : ApplicationService  [Message Type] : ErrorMessage  [Job Name]     : OSoft.Services.Webservice.ApplicationService.ApplicationService.Query()  [DateTime]     : 1/3/2011 4:27:35 PM  [UserId]       : GROUPE\Deshors  [Exception]       DetailMsg  : {System.NullReferenceException: Object variable or With block variable not set.     at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)     at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)     at OSoft.Services.Webservice.ApplicationService.ApplicationService.ValidateUser()     at OSoft.Services.Webservice.ApplicationService.ApplicationService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)}
    ==============[System Error Tracing  End ]============== 
      ==============[System Error Tracing]==============
        [System  Name] : Configuration  [Message Type] : ErrorMessage  [Job Name]     : ServerDefault.GetValue  [DateTime]     : 1/3/2011 4:40:08 PM  [UserId]       :   [Exception]       DetailMsg  : {System.Exception: Cannot create ActiveX component.     at Microsoft.VisualBasic.Interaction.CreateObject(String ProgId, String ServerName)     at OSoft.Services.Application.Configuration.ServerDefault.GetValue(String strKeyId)} 
    ==============[System Error Tracing  End ]============== 
    Any help?
    Thank you in advance.

    Hi expert,
    Unfortunately, we still encounter the issue !!
    We get Unhandled exceptions in the W3WP.EXE process, but the IIS logs do not show anything wrong.
    Here is the Windows event warning message we get :
    Event code: 3005
    Event message: An unhandled exception has occurred.
    Event time: 1/31/2011 11:43:11 AM
    Event time (UTC): 1/31/2011 10:43:11 AM
    Event ID: 0295c38777734029a3cec37ec035fa45
    Event sequence: 8
    Event occurrence: 1
    Event detail code: 0
    Application information:
        Application domain: /LM/W3SVC/1/ROOT/OSoft-1-129409441580590866
        Trust level: Full
        Application Virtual Path: /OSoft
        Application Path: C:\PC_MS\Websrvr\Web\
        *Machine name: **************
    Process information:
        Process ID: 4323
        Process name: w3wp.exe
        Account name: NT AUTHORITY\NETWORK SERVICE
    Exception information:
        Exception type: Exception
        Exception message: Invalid UserID
    Request information:
        Request URL: http://localhost/Osoft/Launch.aspx
        Request path: /Osoft/Launch.aspx
        User host address: ::1
        User:*******\Administrator
        Is authenticated: True
        Authentication Type: Negotiate
        Thread account name: NT AUTHORITY\NETWORK SERVICE
    Thread information:
        Thread ID: 12
        Thread account name: NT AUTHORITY\NETWORK SERVICE
        Is impersonating: False
        Stack trace:    at Microsoft.VisualBasic.CompilerServices.Symbols.Container.InvokeMethod(Method TargetProcedure, Object[] Arguments, Boolean[] CopyBack, BindingFlags Flags)
       at Microsoft.VisualBasic.CompilerServices.NewLateBinding.LateGet(Object Instance, Type Type, String MemberName, Object[] Arguments, String[] ArgumentNames, Type[] TypeArguments, Boolean[] CopyBack)
       at OSoft.Consumers.ZFP.WebBase.Utility.GetLastUserApp(CPMUser& mUser, String strAppServerURL, String strSecurity, String strContext, Boolean bServerPathReset)
       at OSoft.Consumers.ZFP.WebBase.PageBase.Page_Init(Object sender, EventArgs e)
       at System.EventHandler.Invoke(Object sender, EventArgs e)
       at System.Web.UI.Control.OnInit(EventArgs e)
       at System.Web.UI.Page.OnInit(EventArgs e)
       at OSoft.Consumers.ZFP.WebBase.PageBase.OnInit(EventArgs e)
       at System.Web.UI.Control.InitRecursive(Control namingContainer)
       at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
    Thanks in advance for your help
    Lionel

  • How we create a flat file on the application server

    hi,
    how we create a flat file on the application servere,this file have the header data and corresponding item data also.
    i.e. how we use the AT NEW and ATEND. statement in this file creation.
    pls send me some code related to this.
    thanks,
    vipin

    Hi Grafl,
    Chk this link
    Folder creation in AL11 using ABAP program
    try this code.This works on UNIX servers
    data: unixcom like   rlgrap-filename.
    data: begin of tabl occurs 500,       
            line(400),    
          end of tabl.
    dir = unixcom = 'mkdir mydir'. "command to create dir
    "to execute the unix command 
    call 'SYSTEM' id 'COMMAND' field unixcom
                      id 'TAB' field tabl[].
    <b>Reward Points if Useful</b>
    Regards
    Gokul

  • How to set 32bit ODBC connection to the application in 64 bit OS

    hi,
    I have BO installed in 64 Bit windows OS and the mysql data server in 32bit windows OS. i created DNS on the server for the data server. when i click on test connection, I'm getting a message
    DBD:[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified.
    i think this error is due to Os .
    so how do i resolve this issue?
    regards
    sunil kumar koneru

    In this case with maxDB it was not possible to match source DB version. While the system that needed connection to BOBJ was rel7.7 it was not possible to install ODBC drivers from the maxDB client installer > 7.6.00.35
    Higher patch levels or releases went
    INSTALLER_INFO: Version = 7.6.06 Build 008-123-224-525
    INSTALLER_INFO: Changelist = 224525
    INSTALLER_INFO: MakeId = 435925
    INSTALLER_INFO: Type = kit
    SYS_INFO: Host name = BOBBY
    SYS_INFO: System = Windows
    SYS_INFO: Architecture = AMD64
    SYS_INFO: Version = NT 5.2
    SYS_INFO: Subversion = Service Pack 2
    MSG: InstallRegistry: space check ok: 29758306 kb on E: (567023269 kb total) available
    MSG: install registry successfully locked
    MSG: read 17 PACKAGES
    MSG: net registry size = 120750 bytes
    MSG: InstallRegistry: reserved 1024 kb disk space
    MSG: collector found 18 archives
    WRN: software in package "Base" (SDBBAS.TGZ) isn't runnable on your system
    magic string: MS Windows 32-bit i386 executable
    YOUR SYSTEM: architecture = AMD64
    YOUR SYSTEM: subversion = Service Pack 2
    YOUR SYSTEM: system = Windows
    YOUR SYSTEM: version = NT 5.2
    WRN: software in package "ODBC" (SDBODBC.TGZ) isn't runnable on your system
    magic string: MS Windows 32-bit i386 executable dll
    YOUR SYSTEM: architecture = AMD64
    YOUR SYSTEM: subversion = Service Pack 2
    YOUR SYSTEM: system = Windows
    YOUR SYSTEM: version = NT 5.2
    The maxDB guys should do something about this or it least point out proper solution(s).
    Edited by: SAP SAPBASIS on Jun 28, 2010 8:54 AM

  • Installation of Cumulative Update 2 for SCCM 2012 R2 causes Application Catalog error Cannot connect to the application server"

    I have update my primary server with cu2.  Rebooted it when requested.  Now everything appears to work except Application Catalog.  I am getting HttpSendRequestSync failed errors in sms_awebsvc_control_manager and SMS_MP_CONTROL_MANAGER.  Permissions
    for the temp folder and the 2 service folders do have local service and system with full control.  I reregistered .net 4 with aspnet_regiis -i -enable.  Rebooted and no change.  application pool is running.  The install logs said it is
    working.  SQL is happy.  I have reinstalled the two Application Catalog service points varous ways and they always come back with warm fuzzy logs stated they installed.  
    When someone tries to use Application Catalog the ServicePortalWebSite.log always produces the following errors:
    [15, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
    [15, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
    [15, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
    [16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
    [16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
    [16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/, api-version: ""
    [16, PID:9160][09/22/2014 15:32:27] :Passed in language: en-US
    [16, PID:9160][09/22/2014 15:32:27] :Language resolved to: en-US
    [16, PID:9160][09/22/2014 15:32:27] :SoftwareCatalog website - requested resource: ~/default.aspx, api-version: ""
    [16, PID:9160][09/22/2014 15:32:27] :Got 5.0.7958.1000 build version 
    [11, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
    [11, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
    [11, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
    [7, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
    [7, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
    [7, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
    [11, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
    [11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
    [15, PID:9160][09/22/2014 15:32:28] :Passed in language: en-US
    [15, PID:9160][09/22/2014 15:32:28] :Language resolved to: en-US
    [15, PID:9160][09/22/2014 15:32:28] :SoftwareCatalog website - requested resource: ~/ApplicationViewService.asmx, api-version: "1.0"
    [11, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
    [11, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
    [15, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetApplications, startItem = 0, search text = ''
    [7, PID:9160][09/22/2014 15:32:28] :ApplicationViewService.asmx - begin GetMobileApplicationValuesForProperty for property:Category, filter None
    [7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
    [15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - retrieving client proxy using endpoint SecureBinding_IApplicationOfferService
    [7, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
    [7, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
    [15, PID:9160][09/22/2014 15:32:28] :FindCertificate - Found certs via FindByThumbprint, count = 1
    [15, PID:9160][09/22/2014 15:32:28] :DefaultApplicationOfferService - opening channel via client proxy
    [11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
    be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> 
    <html xmlns="http://www.w3.org/1999/xhtml"> 
    <head> 
    <title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title> 
    <style type="text/css"> 
    <!-- 
    body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} 
    code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} 
    .config_source code{font-size:.8em;color:#000000;} 
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} 
    ul,ol{margin:10px 0 10px 40px;} 
    ul.first,ol.first{margin-top:5px;} 
    fieldset{padding:0 15px 10px 15px;} 
    .summary-container fieldset{padding-bottom:5px;margin-top:4px;} 
    legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} 
    legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; 
     border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; 
     border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
    Server stack trace: 
       at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
       at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
       at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
    an error: (500) Internal Server Error.
       at System.Net.HttpWebRequest.GetResponse()
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
    [11, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
    be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> 
    <html xmlns="http://www.w3.org/1999/xhtml"> 
    <head> 
    <title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title> 
    <style type="text/css"> 
    <!-- 
    body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} 
    code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} 
    .config_source code{font-size:.8em;color:#000000;} 
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} 
    ul,ol{margin:10px 0 10px 40px;} 
    ul.first,ol.first{margin-top:5px;} 
    fieldset{padding:0 15px 10px 15px;} 
    .summary-container fieldset{padding-bottom:5px;margin-top:4px;} 
    legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} 
    legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; 
     border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; 
     border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
    Server stack trace: 
       at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
       at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
       at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetApplicationValuesForProperty(ApplicationProperty propertyName, String reserved)System.Net.WebException: The remote server returned an error: (500) Internal Server
    Error.
       at System.Net.HttpWebRequest.GetResponse()
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
    [7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
    be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> 
    <html xmlns="http://www.w3.org/1999/xhtml"> 
    <head> 
    <title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title> 
    <style type="text/css"> 
    <!-- 
    body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} 
    code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} 
    .config_source code{font-size:.8em;color:#000000;} 
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} 
    ul,ol{margin:10px 0 10px 40px;} 
    ul.first,ol.first{margin-top:5px;} 
    fieldset{padding:0 15px 10px 15px;} 
    .summary-container fieldset{padding-bottom:5px;margin-top:4px;} 
    legend.no-expand-all{padding:2px 15px 4px 10px;margin:0 0 0 -12px;} 
    legend{color:#333333;padding:4px 15px 4px 10px;margin:4px 0 8px -12px;_margin-top:0px; 
     border-top:1px solid #EDEDED;border-left:1px solid #EDEDED;border-right:1px solid #969696; 
     border-bottom:1px solid #969696;background:#E7ECF0;font-weight:bold;'.
    Server stack trace: 
       at System.ServiceModel.Security.IssuanceTokenProviderBase`1.DoNegotiation(TimeSpan timeout)
       at System.ServiceModel.Security.SspiNegotiationTokenProvider.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Security.TlsnegoTokenProvider.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Security.SymmetricSecurityProtocol.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.SecurityChannelFactory`1.ClientSecurityChannel`1.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.DoOperation(SecuritySessionOperation operation, EndpointAddress target, Uri via, SecurityToken currentToken, TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionSecurityTokenProvider.GetTokenCore(TimeSpan timeout)
       at System.IdentityModel.Selectors.SecurityTokenProvider.GetToken(TimeSpan timeout)
       at System.ServiceModel.Security.SecuritySessionClientSettings`1.ClientSecuritySessionChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.Channels.ServiceChannel.OnOpen(TimeSpan timeout)
       at System.ServiceModel.Channels.CommunicationObject.Open(TimeSpan timeout)
    Exception rethrown at [0]: 
       at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
       at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
       at System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
       at System.ServiceModel.ClientBase`1.System.ServiceModel.ICommunicationObject.Open(TimeSpan timeout)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.Connection.DefaultApplicationOfferService.Open()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.PortalClasses.AppView.GetApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Website.ApplicationViewService.GetMobileApplicationValuesForProperty(ApplicationProperty propertyName, Platforms platformFilter, String reserved)System.Net.WebException: The remote server returned
    an error: (500) Internal Server Error.
       at System.Net.HttpWebRequest.GetResponse()
       at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
    [7, PID:9160][09/22/2014 15:32:28] :System.ServiceModel.ProtocolException: The content type text/html; charset=utf-8 of the response message does not match the content type of the binding (application/soap+xml; charset=utf-8). If using a custom encoder,
    be sure that the IsContentTypeSupported method is implemented properly. The first 1024 bytes of the response were: '<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Strict//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-strict.dtd"> 
    <html xmlns="http://www.w3.org/1999/xhtml"> 
    <head> 
    <title>IIS 7.5 Detailed Error - 500.24 - Internal Server Error</title> 
    <style type="text/css"> 
    <!-- 
    body{margin:0;font-size:.7em;font-family:Verdana,Arial,Helvetica,sans-serif;background:#CBE1EF;} 
    code{margin:0;color:#006600;font-size:1.1em;font-weight:bold;} 
    .config_source code{font-size:.8em;color:#000000;} 
    pre{margin:0;font-size:1.4em;word-wrap:break-word;} 
    ul,ol{margin:10px 0 10px 40px;} 
    ul.first,ol.first{margin-top:5px;} 
    fieldset{padding:0 1
    Any feedback is appreciated.
    Mike In Vancouver

    The following repeats hourly since installing Cumulative Update 2 in the log awebsctl.log:
    Completed the AWEBSVC availability check against local computer.
    SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 5:09:45 AM
    4436 (0x1154)
    Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 5:09:45 AM 4436 (0x1154)
    Timed Out... SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM 4436 (0x1154)
    Starting certificate maintenance... SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM 4436 (0x1154)
    Certificate (0x3adbdab0) is Exportable SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM 4436 (0x1154)
    Successfully granted permission to certificate
    SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
    4436 (0x1154)
    Successfully completed certificate maintenance
    SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
    4436 (0x1154)
    SSL is not enabled. SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM 4436 (0x1154)
    Call to HttpSendRequestSync failed for port 80 with status code 500, text: Internal Server Error
    SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM
    4436 (0x1154)
    AWEBSVCs http check returned hr=0, bFailed=1
    SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM
    4436 (0x1154)
    AWEBSVC's previous status was 1 (0 = Online, 1 = Failed, 4 = Undefined)
    SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM
    4436 (0x1154)
    Health check request failed, status code is 500, 'Internal Server Error'.
    SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM
    4436 (0x1154)
    STATMSG: ID=8100 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_AWEBSVC_CONTROL_MANAGER" SYS=server.site.com SITE=ABC PID=3000 TID=4436 GMTDATE=Tue Sep 23 13:09:45.600 2014 ISTR0="500" ISTR1="Internal Server Error"
    ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
    SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM
    4436 (0x1154)
    Completed the AWEBSVC availability check against local computer.
    SMS_AWEBSVC_CONTROL_MANAGER 9/23/2014 6:09:45 AM
    4436 (0x1154)
    Waiting for changes for 60 minutes SMS_AWEBSVC_CONTROL_MANAGER
    9/23/2014 6:09:45 AM 4436 (0x1154)
    Mike In Vancouver

  • Application Catalog - Cannot connect to the Application Server (SQL related?)

    Hi,
    There are many posts on this topic, and I've gone through all the various checks and workarounds but I still have the same problem. Essentially my Application Catalog seems to be working to a point, but when it attempts to connect to the SQL DB to check
    what apps are assigned for the user it seems to then fall over.
    This is the extract from the ServicePortalWebService.log file. There are a few exceptions around failing to exectute the DB procedure and again when connecting to SQL server.
    I've checked the IIS Site and the connection string for for CMApplicationCatalogSvc seems to be correct.
    Has anyone else experienced this?
    [19, PID:1188][05/30/2013 13:57:31] :ApplicationOfferService - (SCCM\SCCMInstall) GetApplications call
    [20, PID:1188][05/30/2013 13:57:31] :ApplicationOfferService - (SCCM\SCCMInstall) GetApplicationValuesForProperty call
    [20, PID:1188][05/30/2013 13:58:21] :Failed to execute the DB procedure get the application values for a property
    [20, PID:1188][05/30/2013 13:58:21] :User = S-1-5-21-211678148-561541944-1432470842-1109
    [20, PID:1188][05/30/2013 13:58:21] :System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct
    and that SQL Server is configured to allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.GetNewOpenConnection()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.ExecuteReader(DbCommand command)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationHandler.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty property)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty propertyName, String reserved)
    [20, PID:1188][05/30/2013 13:58:21] :An exception has been thrown from the service: System.ServiceModel.FaultException`1[[Microsoft.ConfigurationManager.SoftwareCatalog.Service.ServiceError, Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferContract,
    Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Internal Server Error
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty propertyName, String reserved)
       at SyncInvokeGetApplicationValuesForProperty(Object , Object[] , Object[] )
       at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
       at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
       at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
       at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
       at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
    [19, PID:1188][05/30/2013 13:58:21] :Failed to execute the DB procedure to get applications targetted at a user
    [19, PID:1188][05/30/2013 13:58:21] :User = S-1-5-21-211678148-561541944-1432470842-1109
    [19, PID:1188][05/30/2013 13:58:21] :System.Data.SqlClient.SqlException: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct
    and that SQL Server is configured to allow remote connections. (provider: Shared Memory Provider, error: 40 - Could not open a connection to SQL Server)
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.GetNewOpenConnection()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.ExecuteReader(DbCommand command)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationHandler.GetApplicationValuesForProperty(UserContext userContext, ApplicationProperty property)
       at System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject)
       at System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection)
       at System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
       at System.Data.SqlClient.SqlConnection.Open()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.GetNewOpenConnection()
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.SqlDatabase.ExecuteReader(DbCommand command)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationHandler.GetApplicationOffers(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter filterBy, String searchBy, Int32 totalNumberOfRowsPerPage,
    Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter)
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplications(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter[] filterBy, String queryString, Int32 maximumRows,
    Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter, String reserved)
    [19, PID:1188][05/30/2013 13:58:21] :An exception has been thrown from the service: System.ServiceModel.FaultException`1[[Microsoft.ConfigurationManager.SoftwareCatalog.Service.ServiceError, Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferContract,
    Version=5.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35]]: Internal Server Error
       at Microsoft.ConfigurationManager.SoftwareCatalog.Service.ApplicationOfferService.GetApplications(Int32& totalNumberRows, UserContext userContext, ApplicationProperty sortBy, ApplicationFilter[] filterBy, String queryString, Int32 maximumRows,
    Int32 startRowIndex, Boolean sortAscending, ApplicationClassicDisplayName classicNameFields, Boolean useSecondarySort, Platforms platformFilter, String reserved)
       at SyncInvokeGetApplications(Object , Object[] , Object[] )
       at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
       at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
       at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage5(MessageRpc& rpc)
       at System.ServiceModel.Dispatcher.ImmutableDispatchRuntime.ProcessMessage4(MessageRpc& rpc)
       at System.ServiceModel.Dispatcher.MessageRpc.Process(Boolean isOperationContextSet)
    Thanks,

    Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
    Did you check the firewall on you SQL server? What rights does the user (S-1-5-21-211678148-561541944-1432470842-1109) have within SQL?
    Garth Jones | My blogs: Enhansoft and
    Old Blog site | Twitter:
    @GarthMJ

  • How to setup a JNDI connection from Crystal report 12 (2008) ?

    I've CR 12 (2008)
    I've a report actually bind to datasource via DSN to a sql server.
    Now we need to migrate this connection to JDBC.
    So i downloaded microsft sql driver for jdbc and copied as
    C:\Program Files (x86)\Business Objects\Common\4.0\java/lib/external/sqljdbc4.jar
    I edited CRConfig.xml. adding this full path and file name at <Classpath>
    The parameters i entered are:
    URL: jdbc:sqlserver://10.1.2.40:1433;DatabaseName=CPR;username=selyon;password=......
    class name: com.microsoft.sqlserver.jdbc.SQLServerDriver
    in the second page i entere my usernmae, my password and the db name,
    but when click on 'finish' CR tell me 'unable to fine JNDI driver'.
    What's the problem now

    Sorry, but I'm not on a home pc, I'm working on a virtualized pc with a long chain of permissions ... so I cannot simply download and run an utility...
    Instead... I think (I WAS thinking) someone from SAP can tell me this info ... Probably I'll buy a paid assistance ticket... But really it's a strange thing that a simply connection from a (so) paid software need a so difficult problem solving routine..
    I edited my environment variales: JAVA, PATH; CLASSPATH; JAVA_DIR, and a long list of others ... to ALL point to ALL of directory containing used jars...
    .. I asked my SysAdmin to edit CrConfig.xml and it's done ... classpath are rights, jdbc infos are also ok, ...
    .. but none ...

  • Trouble connecting to the app server

    Facts:
    Discoverer installed on NT4, connecting to Oracle8i on Solaris via odbc. Able to connect through sqlplus, etc from the nt4.
    Receiving the following error message:
    Unable to connect to the Oracle Discoverer Application Server: oracle/discoverer/corba/_st_DCILocator
    Please contact your Oracle Discoverer Administrator.
    That is me. I am not sure if I installed this thing incorrectly or what.
    Thanks,
    Young

    So I got past the last problem that i posted. I was able to connect after realizing that there were a set of net8 applications (including the discoverer) that uses a different tnsnames.ora than is found in <ora home>\network\admin. I found that you need to also have a tnsnames.ora located in <ora home>\net80\admin and <ora home>\net80\tnsapi.
    This problem killed me!
    I now have that up and running. I got the administrator application up and configured everything wonderfully. I am now stuck on trying to get the 3i client running. I am running into more connectivity issues (says cannot connect to the application server). I am certain that it is another problem with my setup.
    If anyone can help that would be great. if i find the answer i will post.

  • How to find out the application server instance name?

    Hi,
    I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?
    The version of the server as displayed when the server is started:
    $ ./oc4j -start
    Starting OC4J from /oraInventory/j2ee/home ...
    09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0)  initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
    I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
    Many thanks for your help!
    Newman

    J. Newman wrote:
    Hi,
    I installed an Oracle application server a long long while ago and completely forgot the things about the installation, including the name of the instance (I installed single instance, not cluster). Now I am trying to create a connection to the application server and I am prompted to fill in the instance name. Where in the installation can I find out the instance name?If you have access to that server, then the following should give the instance name.
    grep 'IASname' $ORACLE_HOME/config/ias.properties
    you should also see it in the AS Control Console page.
    The version of the server as displayed when the server is started:
    $ ./oc4j -start
    Starting OC4J from /oraInventory/j2ee/home ...
    09/10/08 16:04:39 Oracle Containers for J2EE 10g (10.1.3.2.0)  initializedThis 10.1.3.2.0 number is somewhat confusing. As I understand it, right now if you download a copy of the Application server from Oracle web site, the current version is 10.1.3.1.0.
    Regarding the version numbers, this fourth digit refers to the Component-specific release number. The OAS documentation says this about it.
    "This digit identifies a release level specific to a component. Different components can have different numbers in this position depending upon, for example, component patch sets or interim releases."
    I am also reading the installation guide now and when looking at the server starting messages on the screen, I realize that installing the server in the oraInventory directory is not quite right. Does that interfere with the correct functioning of the server? I installed it but have never tried to use it until now.
    Many thanks for your help!
    NewmanI think Oracle software should always be installed in a separate directory. I think it may also generate errors in its functioning but it will certainly create a whole lot confusion and mess in later administration and configurations.
    hope that helps!
    AMN
    Edited by: AMN on Oct 8, 2009 5:14 PM

  • OSX 10.8 server Set VPN server in Local net, How to restrict the Local some IP connect to the VPN server?(noob,so need clearly)

    the tittle is my question. I am noob , so I hope i can make my question clear. Now i 'd like to tell you more about my question:
    My aim is to set a VPN server in Local lan, then ppl can connect to the VPN server, But I dont wanna all of the Local lan IP cant connet to it. So I neet to set a rule to restrick some local Ip to connect failure, just like banning so IP in a rule.such as: just like the "192.168.4.3~192.168.4.20 ; 192.168.7.3~192.168.7.20 " IPs can connect . the IPs which outside the rules can not do.
    my step is following:
    1) install server app
    2)and then i set a VPN server , finally the VPN server can be connected successfully by local lan computer(PC or Mac)
    3)But i found no restrict IP founction in Server app panel.
    4)then i down load workgroup manager, and found nothing there about such a founction about IP restriction.
    so can you tell me how to aproach my aim?
    Please tell me in a clear detail,I am noob
    thank you

    Won't the password restrict everyone from connecting unless they know the password?
    I have never worked with a VPN server, so I can't really add any suggestions. Below are links to Apple support articles, but I'm not sure they will help you:
    VPN - Set up Connection
    VPN - Advanced Setup 
    VPN - Connect
    VPN - Connect Automatically

  • Please Help.  How can you monitor a directory using jndi connection to a ldap server?

    How can you monitor a directory using jndi connection to a ldap server? I
    want the ldap server to monitor the content change in a file system
    directory on another computer on the network. Can someone please help.
    Thanks
    Fred

    Hi,
    Why do you want to use LDAP for Hard disk monitoring..???
    U can do this by creating a MD5 checksum for all the files existing in some
    perticular
    directory and every hour or any configurable period u can recalculate the
    checksum
    to find out the change in the content.
    I guess all u need is to get the code for "updatedb" utility of Linux and
    instrument it for ur needs..
    Hope it helps...
    -aseem
    mr wrote:
    How can you monitor a directory using jndi connection to a ldap server? I
    want the ldap server to monitor the content change in a file system
    directory on another computer on the network. Can someone please help.
    Thanks
    Fred

Maybe you are looking for