How to build JDK1.5 with Fedora Core 3 on AMD64?

All,
Currently, I am going to do some research work related to the JDK1.5 so I have to rebuild it on the top of Fedora Core 3 on AMD64. But it failed with some "invalid section error messages in assembly language". I wonder that if there is any pepole who have successfully built it before? If yes, could you give me some instructions about the whole building process? Do you still need the GCC 3.2.2? How do you build the GCC 3.2.2? And are you working with the source code from SUN JAVA SCSL, also? In fact, I encountered some "invalied section error" when compiling the .cpp files into .o files.
BTW: I have successfully built the JDK1.5 with FC3 on Inter 32 Bit, with GCC 3.2.2
Thanks,
Neo

A little more detail, please. Excerpt from build log?

Similar Messages

How to build a array with high sampling rates 1K

Hi All:
Now I am trying to develop a project with CRio.
But I am not sure how to build a array with high sampling rates signal, like >1K. (Sigle-point data)
Before, I would like to use "Build Arrary" and "Shift Register" to build a arrary, but I found it is not working for high sampling rates.
Is there anyother good way to build a data arrary for high sampling rates??
Thanks
Attachments:
Building_Array_high_rates.JPG ‏120 KB

Can't give a sample of the FPGA right now but here is a sample bit of RT code I recently used. I am acquiring data at 51,200 samples every second. I put the data in a FIFO on the FPGA side, then I read from that FIFO on the RT side and insert the data into a pre-initialized array using "Replace Array subset" NOT "Insert into array". I keep a count of the data I have read/inserted, and once I am at 51,200 samples, I know I have 1 full second of data. At this point, I add it to a queue which sends it to another loop to be processed. Also, I don't use the new index terminal in my subVI because I know I am always adding 6400 elements so I can just multiply my counter by 6400, but if you use the method described further down below , you will want to use the "new index" to return a value because you may not always read the same number of elements using that method.
The reason I use a timeout of 0 and a wait until next ms multiple is because if you use a timeout wired to the FIFO read node, it spins a loop in the background that polls for data, which rails your processor. Depending on what type of acquisition you are doing, you can also use the method of reading 0 elements, then using the "elements remaining" variable, to wire up another node as is shown below. This was not an option for me because of my programs architecture and needing chunks of 1 second data. Had I used this method it would have overcomplicated things if I read more elements then I had available in my 51,200 buffer.
Let me knwo if you have more qeustions
CLA, LabVIEW Versions 2010-2013
Attachments:
RT.PNG ‏36 KB
FIFO read.PNG ‏4 KB

How to build a screen with master detail data

Hi ,expert ,
Someone can teach me how to build a screen with master detail table ?
I wnat to build a screen for user to maintain FERT group and FERT detail list in one screen .
just like this ..
MASTER Block
FERT1
FERT2
FERT3
DETAIL Block
FERT1A1
FERT1A2
FERT1A3
when I double click FERT1 in the Master Block the detail view will show FERT1A1 A2 A3
Thanks for your help ....
Moderator message : Not enough research before posting. Spec dumping not allowed. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 1:38 PM

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

How to Install SJAS on a Fedora Core 4 box

I've had my share of headaches making SJAS work well on an FC4 box, and as there was no good "how-to" on the install, I've compiled the following from trial and error. Hope this is of some use:
Installing Sun Java App Server on FC4:
1) First, start with a Fedora Core 4 box, running with at least 1GB of RAM. This is the minimum recommended configuration for Sun Java Application server, and its associated programs. Load balancing uses a lot more resources (minimum recommended config is 2GB RAM) but on a stand-alone box, 1GB will do. Ensure you've got disk space and connectivity to the net, especially DNS.
2) Copy over the following files to the box. You'll need all of these for the install:
o compat-libstdc++-296-2.96-132.fc4.i386.rpm - compatibility library needed for FC4, or else the install will crash but won't tell you about it.
o compat-libstdc++-33-3.2.3-47.fc4.i386.rpm - another compatibility library needed
o jdk-1_5_0_02-linux-i586.rpm - the JDK as the Java Application server needs Java to run.
o java_es_05Q4_msgserver-ga-linux-x86.zip � appx 340MB, and is the download which installs SJAS, the web server with load balancer plugin, the directory server, etc.
3) Do an rpm -iv on the compat-libstdc* compat libraries.
4) Do an rpm -iv on the jdk.
5) Link the java executibles to /usr/bin by typing "ln -sf /usr/java/jdk1.5.0_02/bin/* /usr/java". If you installed a different version of the JDK, put in that version instead of 1.5.0.02.
6) Edit your /etc/hosts file. By default, the FC4 install maps your hostname of your box onto localhost / 127.0.0.1. Take this hostname off of 127.0.0.1 so that the only name mapped to 127.0.0.1 is localhost. Then, on the IP address you plan on installing SJAS onto, map the hostname and the fully-qualified domain name to that address. An example /etc/hosts/ file that has worked is:
127.0.0.1 localhost.localdomain localhost
192.168.99.203 iloapp01.scientology.net iloapp01
7) Unzip the java_es_05Q4_msgserver-ga-linux-x86.zip file into a directory using the "unzip" command.
8) Go into the java_es_05Q4/Linux_x86 directory just created, and run ./installer
9) This will then pop up a graphical installer, if you are running this directly on the server. If running via a console, type ./installer -nodisplay which will pop up the installer in text mode.
10) Click through the installer until you get to the packages list. Install all of the packages, unless there is a specific reason � for the server you're working with � that you don't want one or another of the packages.
11) When it asks you if you want to configure now or configure later, click configure now.
12) Page through all of the proceeding pages of questions, entering master passwords when it asks you to. If it hangs on the first screen, asking for a valid IP address and/or hostname, you either (a) didn't specifiy a valid address which is configured on that box, or (b) you messed up on the /etc/hosts file config above. All you want in the "hostname" field is the server name (i.e. "iloapp01") and all you want in the domain name field is the base domain (i.e. "scientology.net"). That will work.
13) Finish the install wizard and let it exit gracefully.
14) After it finishes the install, you should be able to start each of the services on the box without issue.
o You need the Sun Directory Server for authentication. To start the directory server, run /opt/sun/sbin/directoryserver start, which should work without a hitch. Check if it's working and on by doing a ps -ef | grep slapd and see if the slapd process is running (the LDAP server, needed for authentication).
o Test-start the admin console by running /opt/sun/sbin/mpsadmserver start. This should hang for a little while (unless you have a preposterously fast machine) and then report that it's started. If it didn't work, it will tell you "it hasn't been configured" or some such.
o Start the app server by going to /opt/sun/appserver/bin and typing asadmin start-appserv --user admin. You should then be able to start the admin server after typing the master password.
If this all works, you have a Sun Java Application Server installed, as well as the Directory Server to support it and allow for authentication. For more details on what do do from here, see the Getting SJAS Enterprise Edition to work on an Application Server page.
Tad
Church of Scientology
http://www.scientology-washingtondc.org

Hi !
What do you mean with "crash"?[oracle@katon3 oracle]$ oemapp console
start the console,
select database, enter the usernam and password and after
SIGSEGV 11* segmentation violation
stackbase=49875E68, stackpointer=49874AC4
Full thread dump:
"Image Fetcher 1" (TID:0x42192a58, sys_thread_t:0x8b54dd0, state:CW, thread_t: t@393226, sp:0x0 threadID:0x1511, stack_base:0x48cdee68, stack_size:0x200000) prio=1233603152
java.lang.Object@1109071112/1111761664: owner "VtaEmTreeSQLParentNode-Expand-Thread" (0x8cd8100, 1 entry)
oracle.ewt.timer.Periodic@1108949792/1112058504: <unowned>
Waiting to be notified:
"CursorIdler" (0x8c18a48)
Registered Monitor Dump:
Thread queue lock: <unowned>
Waiting to be notified:
"main" (0x831bfc8)
Name and type hash table lock: <unowned>
String intern lock: <unowned>
JNI pinning lock: <unowned>
JNI global reference lock: <unowned>
BinClass lock: <unowned>
Class loading lock: <unowned>
Java stack lock: <unowned>
Code rewrite lock: <unowned>
Heap lock: <unowned>
Has finalization queue lock: <unowned>
Finalize me queue lock: <unowned>
Waiting to be notified:
"Finalizer thread" (0x831d8a8)
Monitor registry: owner "Thread-4" (0x8d38558, 1 entry)
[oracle@katon3 oracle]$
Is there an X serevr running?Yes.
Does oem console java use the correct jre i.e. from $ORACLE_BASE/jre/1.1.8/...?I did not change the jre.
Regards,
Johnny

Javax.sound missing with Fedora Core 3 linux's java compiler?

I'm running Fedora core 3, and I did a complete install(selected all the packeges). I have the java compiler that FC3 installed. I can compile most things, but I seem to be missing the sound package/folder.
This leads to an error when I try to import the sound libraries.
//start code
//simple non-working example
import javax.sound.*;
class sounds
//end code
results in the error "The import javax.sound cannot be resolved"
I am trying to run a code snippet from javaAlmanac, and of course it won't work. Today, a friend of mine had the exact same problem on a windows machine using JDK 1.5.
I'm going to test this code out on a windows machine also.
Are there issues with the FC3 java compiler?
Has anyone else run into and solved this issue?
I'm considering copying the sound folder from some other Java installation, anyone try this?
Thanks,

I'm pretty new at this myself. I've also installed Fedora Core 3 on an AMD 64. When I do the same uname - a I get:
Linux localhost.localdomain 2.6.9-1.667 #1 Tue Nov 2 14:50:10 EST 2004 x86_64 x8 6_64 x86_64 GNU/Linux
Maybe you didn't install as 64 bit ?
I've also successfully installed Jave Runtime Environment. java -version gets me:
java version "1.4.2_08"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_08-b03)
Java HotSpot(TM) Client VM (build 1.4.2_08-b03, mixed mode)
I'd suggest installing 32 bit. I can't tell the difference when I run programmes that use 64 or 32 bits - it will be just as good.
Eurostar

How to build a table with predifined? Like Huffman decoding, there are 34 predefined tables?

I am trying to use Labview for mp3 huffman decoding. there are 34 predefined tables for lookup purpose. I tried build array control, but it is so hard to assign value with size of 16. What is the better way to create predefined array? And how to do lookup table with Labview?

IMHO, the best way to have something "predefined" is to read this data from a "setup/configuration" file (if you don't want to use "default settings" LV feature). The choice of the format for all the data that you want to store in some kind of configuration file is up to you.
Also, constructing a "lookup table" in LV doesn't seems different as for any other programming language.

How to build a array with collected data

Hi,
I have collected data from serial port with VISA. Now I want to build a array with 100 date points. Should I connect VISA Read with Build Array directly? How to do it?
PS: All of them are in a While Structure.
Thank you!

An inefficient way to create the array is to use the build array and a shift register as shown below. It's more effecient in terms of memory management to create the array and then use the replace array subset as shown in the other image. Of course, if you don't need the array inside the loop, just wire the value out of the while loop and on the exit tunnel, right click and select 'Enable Indexing'.
Message Edited by Dennis Knutson on 07-03-2007 10:25 PM
Message Edited by Dennis Knutson on 07-03-2007 10:26 PM
Attachments:
Crude Build Array.PNG ‏4 KB
Better Build Array.PNG ‏6 KB

For a READ TABLE how to build a dynamic WITH KEY condition?

Hi All,
I have a Z table with 6 fields. The first field is the Plant and is the key field. This field can be matched with the field from selection screen. Now I have 4 character fields which can contain various values. Now I have another field at the end of the table and this field is the one which I will need for further processing.
Now this last field will be selected based on the data for first 5 fields.
This Read is performed in a loop and the data for all the 4 character fields may not be present.
Now my problem is how to build a Read statement for this table where I need to get the value of the Last field based on the values of first 5 fields?

Hi,
    Use
IF    you have internal table With header line then use
      REad Tablename with key field1 = value1   field2 = value2      field3 = value3        field4 = value4    field5 = value5.
If sy-subrc = 0.
endif.
if you have internal table WithOut header line then use
     REad Tablename into workArea with key field1 = value1   field2 = value2      field3 = value3        field4 = value4    field5 = value5.
If sy-subrc = 0.
endif.
regards,
Amit

How to install Oracle Applications on Fedora Core 6?

I am trying to install Oracle Applications on Fedora Core 6. But when i start rapidinstall it is showing the error as permission denied eventhough all permissions are correct. I tried this with singleuser and multiuser also.
Is it possible to install Oracle Applications on Fedora Core 6?

It is probably best to stick with Red Hat AS/ES 3.0/4.0, Oracle Linux 4.0, or SLES9/Suse9/10 for installing Oracle Applications. Even if you could install it on FC 6, it is likely it would break, and be very difficult to get it working again.
Here are the RH 4 prerequisites:
Red Hat Enterprise Linux AS/ES 4.0* Legacy Software Development package and X Software Development package
Note: Select these packages from the Package Group Selection screen. If the operating system is already installed, use System Settings > Add/Remove Applications to install these two packages.
The following components will be installed automatically:
compat-db-4.1.25-9
compat-gcc-32-3.2.3-47.3
compat-gcc-32-c++-3.2.3-47.3
compat-oracle-rhel4-1.0-5
compat-libcwait-2.0-2
compat-libgcc-296-2.96-132.7.2
compat-libstdc++-296-2.96-132.7.2
compat-libstdc++-33-3.2.3-47.3
xorg-x11-deprecated-libs-devel-6.8.1-23.EL
xorg-x11-deprecated-libs-6.8.1-23.EL
The following required component must be installed manually:
openmotif-2.1.30-x
Note: For information on downloading the openmotif component, see the instructions at the following URL: https://rhn.redhat.com/errata/RHSA-2 005-412.html

How to build a form with multiple tables in oracle application express

Hi everyone,
I have got problem in building a form with multiple tables.I have a main table with (20) columns and this main table is related to the other tables with the primary key-foreign key relation ship.My requirement is i have to build a form which has fields from many tables and all the fields are related to the main table using (ID) column.In that form if i enter ID field i have to get information from differnt tables.
Please help me to solve this (building a form with mutiple tables)
Thank you
sans

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

How to build a table with two For Loop

Hi,
I have two Loop For and I want to build a table with N columm (N = a loop + b loop)
You can see my example.
Thank's a lot
Attachments:
help_table.zip ‏10 KB

I think this is the solution that you are going for.
-Jim
Attachments:
help_table.vi ‏26 KB

How to build a Matrix with Group Left Report

I want to build a Matrix with Group Left Report,not Matrix with Group Above Report,i am still finding the solution, any help is useful.
thanks
<[email protected]>

Hi,
The problem in your output is not clear. The report output should appear like:
Order Mode.....Sales_Rep_ID > 10..11..12..
Online.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Order Mode.....Sales_Rep_ID > 10..11..12..
Retail.........Order Status
...............A..............x....x...x
...............B..............x....x...x
...............C..............x....x...x
Here "Order Mode" is the group field (it repeats for every group). Could you pl specify what output you are getting?
If the problem is that you don't want the Title (like "Order Mode" in the above example) to print in every group, just place it outside the group repeating frame. It will print only once.
Navneet.

How to build a form with a tree component

Hi, i'd like to know if it's posssible to build a form with
the Flash 8 Tree component.
My menu looks like a tree but the childnodes of this tree are
some form criteria that you can aditionate and post to a serveur.
I try to use the accordeon menu, and it works but my menu
must have dynamic heigth, and open all the boxes like the tree
component...
I'm in a hole... please healp me...
Thinks

Sans,
I am no Apex expert, but with a situation as "complex" as yours, have you thought about creating a VIEW that joins these 7/8 tables, placing an INSTEAD OF trigger on that view to do all the business logic in the database, and base your application on the view?
This is the "thick-database" approach that has been gaining momentum of late. The idea is to put your business logic in the database wherever possible, and let the application (Form, Apex, J2EE, whatever) concentrate on UI issues,

How to build this query with the minumum number of sub-selects?

The question I am trying to answer is analogous to this:
Give me all projects that: (have no employees assigned and are small) or (have only employees with the the last name = "Smith")
Thanks,
Roman

Thank you :
1- I am in 9.0.4.8 version and can not use allOf expression (availible in beta version)
2- I not find .notIn(subQuery) operator in 9.0.4.8 version and i replace it by .in(subQuery).not() !
My new query retrieve Customer who have 0 (zéro) Orders !
How to retrieve only customer (with orders + with orders without "television") ?
My new query is :
<div align="left" class="java">
static void findCustNoComputer (){
 ClientSession cs = TopLinkSession.acquireClientSession();


 ReadAllQuery query = new ReadAllQuery(Customer.class);
 ExpressionBuilder queryBuilder = query.getExpressionBuilder();

 ExpressionBuilder subqueryBuilder = new ExpressionBuilder(Customer.class);
 ReportQuery subQuery = new ReportQuery(Customer.class, subqueryBuilder);
 subQuery.addAttribute("id");
 subQuery.setSelectionCriteria(subqueryBuilder.anyOf("Orders").anyOf("OrderItems").get("product").get("productName").equal("Computer"));
 query.setSelectionCriteria(queryBuilder.get("id").in(subQuery).not());

 Vector allCustomers = (Vector)cs.executeQuery(query);
 Iterator allCustomersIterator = allCustomers.iterator();
 while (allCustomersIterator.hasNext()) 
 {
 Customer tempCustomer = (Customer)allCustomersIterator.next();
 System.out.println(tempCustomer);
 }
 cs.release();
}


Sql of query :
SELECT
 t0.CUST_LAST_NAME, t0.CUST_FIRST_NAME, t0.CREDIT_LIMIT, t0.CUST_EMAIL, t0.CUSTOMER_ID, t0.PHONE_NUMBER2, t0.PHONE_NUMBER1, t0.CUST_STREET_ADDRESS1, t0.CUST_CITY, t0.CUST_STREET_ADDRESS2, t0.CUST_STATE, t0.CUST_POSTAL_CODE
FROM TL_CUSTOMER t0
WHERE NOT (
 (t0.CUSTOMER_ID IN
 (SELECT DISTINCT t1.CUSTOMER_ID
 FROM TL_CUSTOMER_ORDER t4, TL_ORDER_ITEM t3, TL_PRODUCT t2, TL_CUSTOMER t1
 WHERE (
 (t2.PRODUCT_NAME = ?) AND
 ((t2.PRODUCT_ID = t3.PRODUCT_ID) AND
 ((t3.ORDER_ID = t4.ORDER_ID) AND (t4.CUSTOMER_ID = t1.CUSTOMER_ID)))))))
Regards

HELP! How to build a table with loop

Hi,
I have a problem with "loop for".
When I used one Loop For, it's ok.
I can build a tab with register but with 2 loop For, I can't. Why ?
You can see my example for understand my question.
Thank's a lot if you have a answer.
Attachments:
Help_build_tab.vi ‏47 KB

Here is the solution, I think that you are looking for.
-Jim
Attachments:
Help_build_tab.vi ‏35 KB

How to build JDK1.5 with Fedora Core 3 on AMD64?

Similar Messages

Maybe you are looking for