How to but a mark at each NoVALUE on a plot
I am trying to place an "X" at each NoVALUE on a several plots in a report. I currently am using the "Find" function in a loop to find the NoVALUE's but it takes approx. 25 min to do this on 100 channels with 8100 data points in each channel. I know using a loop with this many iterations is a bad idea but that was the only way I thought of to get what I need. Is there a better way to do this?
Thanks in advance,
AJL
Hi,
One possible solution for your problem is attached (but only with five Y channels). It based on two facts:
1) You can reference channels in various ways in dialog boxes or scripts. To create the channel reference, combine the group name or the group index with the channel name or the channel index. This specifies the channel unambiguously. In your case I use group index and channel index.
2) You can use several channel groups. In your case I used a second channel group to store the temporary channels.
Hoping that solves the problem.
Greetings
Walter
Attachments:
Test2.zip 9 KB
Similar Messages
-
Just purchased a USB Super Drive but unsure how to use it - o instructions provided apart from how to eject a cd. Each time I put in a cd it just ejects it again.Can anyone help.
USB is rarely bootable under Mac OS X and PowerPC Macs. Get a Firewire Superdrive from http://www.macsales.com/ if your intent is to boot the machine. PPC, which is PowerPC, indicates the Mac predates 2006.
-
How come my ipod5 has an exclamation mark on each wifi connection that is available to it
how come there is an exclamation mark on each respective wifi connection available?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on the router
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Hello,
I get but not the app. store in my dock.
App. store is not installed, how do I do it for each other?
I have my apple software update.
App.store app but after my update is not in the dock and system.
Kees.Hi Kees ...
Your profile indicates you are running Leopard v10.5.8
You need to upgrade to Snow Leopard V10.6 in order to use the App Store. This is an "upgrade", not an "update".
Make sure your Mac meets Snow Leopard's requirements here.
You must have the minimum of v10.6.6 installed in order to access the App Store.
You can purchase Snow Leopard here > Mac OS X 10.6 Snow Leopard - Apple Store -
I recently upgraded to iWork v9.0.3, but when I access each applications the versions are different (i.e. Pages V.4.1, Numbers V2.6, Keynote V5.1.1) with a install date of 3/18/09 -- which is not the current install date of 2 weeks ago. Shouldn't Pages, Numbers, and Keynote show version 9.?? My MAC confirned installation of v9.0.3 and even accepted the software code. With this discrepancy, how can I determine if the latest was installed and operational? I even downloading v9.0.4, 9.0.5, and 9.1. When I tried installing these downloads it popped up note stating that a later version of Keynote was already installed.
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
-
How to add chapter markers for each file in a folder?
Hello,
I have several image folders with up to 700 images per. I would like to drag & drop them into the timeline but I want to be able to use the chapter/arrow button on the DVD player remote to scroll through them.....like a videoscrapbook, per se.
Is there a setting that will allow me to drop them into the time line and automatically generate a chapter marker for each image, that will be read on export to DVDSP? Surely, there is something like this built in that I just have not yet found; I cannot believe the only alternative is to manually add 700 chapter markers per folder. And do they always go into the timeline in alphabetical order? Can that be prevented or altered?
Also, doesn't it seem strange there is no single-button option (I'm presuming here, since I have not found one) for adding a chapter marker; the '~' button adds a generic marker but you must 'edit' it and click 'chapter marker' - very time-consuming --- or am I missing something here, too? If so please enlighten me! I've experimented a lot but no luck.
Many thanks!
jfI thought there was a folder size limitation on DVDSP - these folders have digital family photos on them and they are jam-packed; 600, 700, whatever. And there are several of them. I guess I thought putting them in FCP was the only way to avoid the limitation - if there is one.
I'll try putting them straight into DVDSP and see what happens. Thanks!
jf -
How to Get Missing Dates for Each Support Ticket In My Query?
Hello -
I'm really baffled as to how to get missing dates for each support ticket in my query. I did a search for this and found several CTE's however they only provide ways to find missing dates in a date table rather than missing dates for another column
in a table. Let me explain a bit further here -
I have a query which has a list of support tickets for the month of January. Each support ticket is supposed to be updated daily by a support rep, however that isn't happening so the business wants to know for each ticket which dates have NOT been
updated. So, for example, I might have support ticket 44BS which was updated on 2014-01-01, 2014-01-05, 2014-01-07. Each time the ticket is updated a new row is inserted into the table. I need a query which will return the missing dates per
each support ticket.
I should also add that I DO NOT have any sort of admin nor write permissions to the database...none at all. My team has tried and they won't give 'em. So proposing a function or storable solution will not work. I'm stuck with doing everything
in a query.
I'll try and provide some sample data as an example -
CREATE TABLE #Tickets
TicketNo VARCHAR(4)
,DateUpdated DATE
INSERT INTO #Tickets VALUES ('44BS', '2014-01-01')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-05')
INSERT INTO #Tickets VALUES ('44BS', '2014-01-07')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-03')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-09')
INSERT INTO #Tickets VALUES ('32VT', '2014-01-11')
So for ticket 44BS, I need to return the missing dates between January 1st and January 5th, again between January 5th and January 7th. A set-based solution would be best.
I'm sure this is easier than i'm making it. However, after playing around for a couple of hours my head hurts and I need sleep. If anyone can help, you'd be a job-saver :)
Thanks!!CREATE TABLE #Tickets (
TicketNo VARCHAR(4)
,DateUpdated DATETIME
GO
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-01'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-05'
INSERT INTO #Tickets
VALUES (
'44BS'
,'2014-01-07'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-03'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-09'
INSERT INTO #Tickets
VALUES (
'32VT'
,'2014-01-11'
GO
GO
SELECT *
FROM #Tickets
GO
GO
CREATE TABLE #tempDist (
NRow INT
,TicketNo VARCHAR(4)
,MinDate DATETIME
,MaxDate DATETIME
GO
CREATE TABLE #tempUnUserdDate (
TicketNo VARCHAR(4)
,MissDate DATETIME
GO
INSERT INTO #tempDist
SELECT Row_Number() OVER (
ORDER BY TicketNo
) AS NROw
,TicketNo
,Min(DateUpdated) AS MinDate
,MAx(DateUpdated) AS MaxDate
FROM #Tickets
GROUP BY TicketNo
SELECT *
FROM #tempDist
GO
-- Get the number of rows in the looping table
DECLARE @RowCount INT
SET @RowCount = (
SELECT COUNT(TicketNo)
FROM #tempDist
-- Declare an iterator
DECLARE @I INT
-- Initialize the iterator
SET @I = 1
-- Loop through the rows of a table @myTable
WHILE (@I <= @RowCount)
BEGIN
-- Declare variables to hold the data which we get after looping each record
DECLARE @MyDate DATETIME
DECLARE @TicketNo VARCHAR(50)
,@MinDate DATETIME
,@MaxDate DATETIME
-- Get the data from table and set to variables
SELECT @TicketNo = TicketNo
,@MinDate = MinDate
,@MaxDate = MaxDate
FROM #tempDist
WHERE NRow = @I
SET @MyDate = @MinDate
WHILE @MaxDate > @MyDate
BEGIN
IF NOT EXISTS (
SELECT *
FROM #Tickets
WHERE TicketNo = @TicketNo
AND DateUpdated = @MyDate
BEGIN
INSERT INTO #tempUnUserdDate
VALUES (
@TicketNo
,@MyDate
END
SET @MyDate = dateadd(d, 1, @MyDate)
END
SET @I = @I + 1
END
GO
SELECT *
FROM #tempUnUserdDate
GO
GO
DROP TABLE #tickets
GO
DROP TABLE #tempDist
GO
DROP TABLE #tempUnUserdDate
Thanks,
Shridhar J Joshi
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'> -
Qry:How to get different price for each price list (variable area) in order
1-How to get different price for each price list (variable area) in order for sale. for the opportunity to display and select multiple prices.
2- I add a location store from a table in line item and I want to see this area in order,.
I 'm created 2 field location(item line and order), 1 table location
I tried this for exemple : select $ [userfieldlocation.OITW]Thanks Suda for your answer,
the Formatted Search for prices is OK, but for the Item locations in warehouse this is not so simple,
I must have several (at least 2) locations for the item in the Warehouse and a track of this location and search possibilities.
read carefully and imagine how (Management warehouse locations)
I added a user table '@Location' who linked to a user field 'U_Location in Item master data --> lnventory data line and an ather user field 'U_Location' in sales order
I met the value of location in the table (list of locations for any warehouse), I select the location of each item while receiving merchandise in the user field of inventory data line (Item M data) and this value appears in the sales order 'U_Location' user field ( only the location value in the default warehouse for this Item)
or
create an user field 'location' in Good receipt PO to fill it while receiving merchandise that appears in the sales order to give possibility to find/select the location of the item at this order and in Item master data
I think we will use all these tables
@LOCATION
PDN1
OITM
OITW
OWHS
RDR1
Juste a another question : where you found this and What is: ' 38.1.0 '
Is it in document (System information):Item=38 Pane=1 ??
Thanks,
Ouchen -
I have a few hundred duplicates in my iPhoto library, but the file sizes are different. So one is 1.3mb and one is 567kb. I want to delete the smaller ones, but short of comparing each duplicate, is there a way to do this? I've been looking at Duplicate Annhilator but I don't think it can do it.
Thanks!I just ran a test with iPhoto Library Manager, Duplicate Annihilator, iPhoto Duplicate Cleaner, Duplifinder and Photodedupo. I imported a folder of 5 photos into a test library 3 times, allowing iPhoto to import duplicates. I then ran the 5 photos thru resizer to reduce their jpeg compression but all other aspects of the file the same.
None of the duplicate removal apps found set that was reduced in the file resizer. That's probably due to the fact that the file creation date was being used as a criteria and the resized photo would have a different file creation date even though the Image Capture date was the same.
They all found the 3 regular duplicates and some of them would mark two and leave the 3rd unmarked. iPhoto Duplicate Cleaner can sort the found duplicates by file size but if the file was edited to get the reduced file size it might not be found as it would have a different file creation/modification date.
iPhoto Library Manage was able to find all duplicates and mark them as such if the file names were the same the the filename option was selected. Otherwise it also missed the modified, resized version. It allowed one to select the one photo to save before going to work on the library.
So if a photo has been reduced in image quality or pixel size it will not be considered a duplicate.
OT -
How to find the level of each child table in a relational model?
Earthlings,
I need your help and I know that, 'yes, we can change'. Change this thread to a answered question.
So: How to find the level of each child table in a relational model?
I have a relacional database (9.2), all right?!
O /* This is a child who makes N references to each of the follow N parent tables (here: three), and so on. */
/↑\ Fks
O"O O" <-- level 2 for first table (circle)
/↑\ Fks
"o"o"o" <-- level 1 for middle table (circle)
↑ Fk
"º"Tips:
- each circle represents a table;
- red tables no have foreign key
- the table in first line of tree, for example, has level 3, but when 3 becomes N? How much is N? This's the question.
I started thinking about the following:
First I have to know how to take the children:
select distinct child.table_name child
from all_cons_columns father
join all_cons_columns child
using (owner, position)
join (select child.owner,
child.constraint_name fk,
child.table_name child,
child.r_constraint_name pk,
father.table_name father
from all_constraints father, all_constraints child
where child.r_owner = father.owner
and child.r_constraint_name = father.constraint_name
and father.constraint_type in ('P', 'U')
and child.constraint_type = 'R'
and child.owner = 'OWNER') aux
using (owner)
where child.constraint_name = aux.fk
and child.table_name = aux.child
and father.constraint_name = aux.pk
and father.table_name = aux.father;Thinking...
Let's Share!
My thanks in advance,
Philips
Edited by: BluShadow on 01-Apr-2011 15:08
formatted the code and the hierarchy for readbilityJustin,
Understood.
Nocycle not work in 9.2 and, even that would work, would not be appropriate.
With your help, I decided a much simpler way (but there is still a small problem, <font color=red>IN RED</font>):
-- 1
declare
type udt_roles is table of varchar2(30) index by pls_integer;
cRoles udt_roles;
begin
execute immediate 'create user philips
identified by philips';
select granted_role bulk collect
into cRoles
from user_role_privs
where username = user;
for i in cRoles.first .. cRoles.count loop
execute immediate 'grant ' || cRoles(i) || ' to philips';
end loop;
end;
-- 2
create table philips.root1(root1_id number,
constraint root1_id_pk primary key(root1_id)
enable);
grant all on philips.root1 to philips;
create or replace trigger philips.tgr_root1
before delete or insert or update on philips.root1
begin
null;
end;
create table philips.root2(root2_id number,
constraint root2_id_pk primary key(root2_id)
enable);
grant all on philips.root2 to philips;
create or replace trigger philips.tgr_root2
before delete or insert or update on philips.root2
begin
null;
end;
create table philips.node1(node1_id number,
root1_id number,
node2_id number,
node4_id number,
constraint node1_id_pk primary key(node1_id)
enable,
constraint n1_r1_id_fk foreign key(root1_id)
references philips.root1(root1_id) enable,
constraint n1_n2_id_fk foreign key(node2_id)
references philips.node2(node2_id) enable,
constraint n1_n4_id_fk foreign key(node4_id)
references philips.node4(node4_id) enable);
grant all on philips.node1 to philips;
create or replace trigger philips.tgr_node1
before delete or insert or update on philips.node1
begin
null;
end;
create table philips.node2(node2_id number,
root1_id number,
node3_id number,
constraint node2_id_pk primary key(node2_id)
enable,
constraint n2_r1_id_fk foreign key(root1_id)
references philips.root1(root1_id) enable,
constraint n2_n3_id_fk foreign key(node3_id)
references philips.node3(node3_id) enable);
grant all on philips.node2 to philips;
create or replace trigger philips.tgr_node2
before delete or insert or update on philips.node2
begin
null;
end;
create table philips.node3(node3_id number,
root2_id number,
constraint node3_id_pk primary key(node3_id)
enable,
constraint n3_r2_id_fk foreign key(root2_id)
references philips.root2(root2_id) enable);
grant all on philips.node3 to philips;
create or replace trigger philips.tgr_node3
before delete or insert or update on philips.node3
begin
null;
end;
create table philips.node4(node4_id number,
node2_id number,
constraint node4_id_pk primary key(node4_id)
enable,
constraint n4_n2_id_fk foreign key(node2_id)
references philips.node2(node2_id) enable);
grant all on philips.node4 to philips;
create or replace trigger philips.tgr_node4
before delete or insert or update on philips.node4
begin
null;
end;
-- out of the relational model
create table philips.node5(node5_id number,
constraint node5_id_pk primary key(node5_id)
enable);
grant all on philips.node5 to philips;
create or replace trigger philips.tgr_node5
before delete or insert or update on philips.node5
begin
null;
end;
-- 3
create table philips.dictionary(table_name varchar2(30));
insert into philips.dictionary values ('ROOT1');
insert into philips.dictionary values ('ROOT2');
insert into philips.dictionary values ('NODE1');
insert into philips.dictionary values ('NODE2');
insert into philips.dictionary values ('NODE3');
insert into philips.dictionary values ('NODE4');
insert into philips.dictionary values ('NODE5');
--4
create or replace package body philips.pck_restore_philips as
procedure sp_select_tables is
aExportTablesPhilips utl_file.file_type := null; -- file to write DDL of tables
aExportReferencesPhilips utl_file.file_type := null; -- file to write DDL of references
aExportIndexesPhilips utl_file.file_type := null; -- file to write DDL of indexes
aExportGrantsPhilips utl_file.file_type := null; -- file to write DDL of grants
aExportTriggersPhilips utl_file.file_type := null; -- file to write DDL of triggers
sDirectory varchar2(100) := '/app/oracle/admin/tace/utlfile'; -- directory \\bmduhom01or02
cTables udt_tables; -- collection to store table names for the relational depth
begin
-- omits all referential constraints:
dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'REF_CONSTRAINTS', false);
-- omits segment attributes (physical attributes, storage attributes, tablespace, logging):
dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SEGMENT_ATTRIBUTES', false);
-- append a SQL terminator (; or /) to each DDL statement:
dbms_metadata.set_transform_param(dbms_metadata.session_transform, 'SQLTERMINATOR', true);
-- create/open files for export DDL:
aExportTablesPhilips := utl_file.fopen(sDirectory, 'DDLTablesPhilips.pdc', 'w', 32767);
aExportReferencesPhilips := utl_file.fopen(sDirectory, 'DDLReferencesPhilips.pdc', 'w', 32767);
aExportIndexesPhilips := utl_file.fopen(sDirectory, 'DDLIndexesPhilips.pdc', 'w', 32767);
aExportGrantsPhilips := utl_file.fopen(sDirectory, 'DDLGrantsPhilips.pdc', 'w', 32767);
aExportTriggersPhilips := utl_file.fopen(sDirectory, 'DDLTriggersPhilips.pdc', 'w', 32767);
select d.table_name bulk collect
into cTables -- collection with the names of tables in the schema philips
from all_tables t, philips.dictionary d
where owner = 'PHILIPS'
and t.table_name = d.table_name;
-- execution
sp_seeks_ddl(aExportTablesPhilips,
aExportReferencesPhilips,
aExportIndexesPhilips,
aExportGrantsPhilips,
aExportTriggersPhilips,
cTables);
-- closes all files
utl_file.fclose_all;
end sp_select_tables;
procedure sp_seeks_ddl(aExportTablesPhilips in utl_file.file_type,
aExportReferencesPhilips in utl_file.file_type,
aExportIndexesPhilips in utl_file.file_type,
aExportGrantsPhilips in utl_file.file_type,
aExportTriggersPhilips in utl_file.file_type,
cTables in out nocopy udt_tables) is
cDDL clob := null; -- colletion to save DDL
plIndex pls_integer := null;
sTableName varchar(30) := null;
begin
for i in cTables.first .. cTables.count loop
plIndex := i;
sTableName := cTables(plIndex);
* Retrieves the DDL and the dependent DDL into cDDL clob *
* for the selected table in the collection, and writes to file.*
begin
cDDL := dbms_metadata.get_ddl('TABLE', sTableName, 'PHILIPS');
sp_writes_ddl(aExportTablesPHILIPS, cDDL);
exception
when dbms_metadata.object_not_found then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('REF_CONSTRAINT', sTableName, 'PHILIPS');
sp_writes_ddl(aExportReferencesPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('INDEX', sTableName, 'PHILIPS');
sp_writes_ddl(aExportIndexesPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('OBJECT_GRANT', sTableName, 'PHILIPS');
sp_writes_ddl(aExportGrantsPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
begin
cDDL := dbms_metadata.get_dependent_ddl('TRIGGER', sTableName, 'PHILIPS');
sp_writes_ddl(aExportTriggersPhilips, cDDL);
exception
when dbms_metadata.object_not_found2 then
null;
end;
end loop;
end sp_seeks_ddl;
procedure sp_writes_ddl(aExport in utl_file.file_type,
cDDL in out nocopy clob) is
pLengthDDL pls_integer := length(cDDL);
plQuotient pls_integer := null;
plRemainder pls_integer := null;
begin
* Register variables to control the amount of lines needed *
* for each DDL and the remaining characters to the last row. *
select trunc(pLengthDDL / 32766), mod(pLengthDDL, 32766)
into plQuotient, plRemainder
from dual;
* Join DDL in the export file. *
* ps. 32766 characters + 1 character for each line break. *
-- if the size of the DDL is greater than or equal to limit the line ...
if plQuotient >= 1 then
-- loops for substring (lines of 32766 characters + 1 break character):
for i in 1 .. plQuotient loop
utl_file.put_line(aExport, substr(cDDL, 1, 32766));
-- removes the last line, of clob, recorded in the buffer:
cDDL := substr(cDDL, 32767, length(cDDL) - 32766);
end loop;
end if;
* If any remains or the number of characters is less than the threshold (quotient = 0), *
* no need to substring. *
if plRemainder > 0 then
utl_file.put_line(aExport, cDDL);
end if;
-- record DDL buffered in the export file:
utl_file.fflush(aExport);
end sp_writes_ddl;
begin
-- executes main procedure:
sp_select_tables;
end pck_restore_philips;<font color="red">The problem is that I still have ...
When creating the primary key index is created and this is repeated in the file indexes.
How to avoid?</font> -
How to allocate disk size for each user in iMac?
Hi folks,
I have iMac (Mac OS X, version 10.7.5) for Family, and each of my family member has account on it.
Now, kids download many large files (several GB size files) and HD is getting full.
So, I'd like to set maximum disk size for each user.
Could you prvide instruction how to configure disk size for each user?
Regards,
HiroI don't know of any way to do that by user.
I used to partition my HD and that sets a hard limit by partition, but by user? I don't think it can be done. -
Can anyone tell me how to convert crop marks to registration on a supplied pdf. The pdf also has spot colours which the crop marks need to be in too.
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Both can connect to test sites but not videochat with each other
I am using a 2GHz PPC iMac on 10.4.6 with external iSight. I can see the Apple ad from one of the test sites. My wife is using a G4 PowerBook running the latest Panther OS with external iSight. She is in a hotel but can also see the Apple ad from the test site. When she was home, we could videochat over Bonjour.
But, while she is in the hotel out of town, we couldn't videochat with each other. Whether one initiated or the other did, we both get the "XXX failed to respond" message even though we obviously did accept the videocall.
If we both can videochat with the test sites, how come we cannot videochat with each other?
Given the above, I hope some experts can rule out a bunch of stuff and let me know the finite (and small) set of potential reasons affecting our situation so that I can work on resolving this efficiently.
What could be the likely problem?
On my side, I use an Apple AEBS that uses DHCP and NAT but my iMac is manually set to 10.0.1.201. I have set the ports in Firewall but even when I turned off Firewall it did not work.
Any help is much appreciated.Hi Heng-Yee Yong,
The test sites are most likely set to have the ports open by UPnP which does not use NAT.
If you modem is routing and is using Port Forwarding and the Airport is as well then you have two lots of NAT going on at your end.
I would Open Airport Admin Utilty (Applications/Utilities) and log on to the Airport
Go to the Network tab.
Deselect Distributing Addresses which wll trun off NAT in the Airport and make it a Wireless access device.
This means your computer will have to take an IP form the Modem.
This may not be rquired if the modem id is Bridge mode itself as this measn it is not routing and all port will be open without the use of NAT.
This App can help identify if NAT is a problem
http://bleu.west.spy.net/~dustin/projects/natcheck.xtp
Or at least whether you have Consistent NAT or not.
8:50 PM Wednesday; April 26, 2006 -
How to find that how many mailboxes are stored in each database
Hi every one.
Good evening
My question is, i have two databases in exchange 2010 server and i have around 150 mailboxes in both databases.
mdb01 & mdb02. I need to now how many mailboxes are stored in each database like
pls see example.. this is just a example..i dont no how many are stored in each datbase :-(
mdb01----20 mailbox
mdb02----130 mailboxes
and also i would like to know about the below details also
available mailboxsize in each database----DBsize---DB white space--
Thanks for your kind help
KaranTo see how many mailboxes you have in each database, run:
Get-Mailbox -Server <ServerName> | group database | ft Name,count -AutoSize
...and to get a hunch of how much free space you have available, run
Get-MailboxDatabase -Server <ServerName> -Status| ft Name,databasesize,available* -AutoSize
...but to get the exact amount of free space, you need to dismount the database and run
eseutil /ms
See:
How To Check Database White Space In Exchange
Martina Miskovic -
How can a question marked as "solved" be restored to unsolved status?
How do you remove the “This solved my question” status icon if the answer turns out to be wrong?
Variations of this question can be found in a few discussion threads in the Apple Support Community. I found one very similar question marked as “This solved my question.” Unfortunately the answer was, “It can't be changed.” I have reasons for trying to, at least, get a more definitive answer.
A primary purpose of these discussions is to resolve issues. It is very frustrating to read through long threads that claim to have an answer, only to find that the question was mistakenly marked “solved.” I spent over an hour on a thread that was marked as resolved. The member that made the mistake wanted to remove the “solved” status--even asked for help several times. I finished the thread just in case either issue was resolved. No, neither issue was resolved.
May someone, Apple if necessary, explain how to revert the “solved” status or help fix the problem? If it is a known issue with no workaround, it would be very helpful to have an explanation. Accordingly, are there plans to fix this problem, and a rough idea when? This could be a “This solved my question” hallmark worth celebrating!
Caution: This discussion or parts of it may be revised or deleted while I attempt to find a solution or workaround. Once I've given up or the issue is resolved, I will indicate so, even if it requires a repost. Relevant contributions will be indicated either way.leonieDF and seventy one pointed out, (paraphrasing) all posts can be helpful in some way, even if the original owner of the discussion didn't get their question resolved.
Maybe if I keep using this tool I'll change my mind, but most of the time I'd rather save time getting something solved than not.
If anyone believes there are legitimate reasons owners and participants of a discussion would benefit from the ability of the owner to reset the solved status, you're welcome to chime in.
These excerpts from my original post express why I think a change is needed:
Stiltskin!: “The member that made the mistake wanted to remove the “solved” status--even asked for help several times. I finished the thread just in case either issue was resolved. No, neither issue was resolved.”
Stiltskin!: “I didn't find any entry in that thread with an answer to revert the icon. So I got the idea it wasn't common knowledge because so many posters asked the owner to fix it even though the owner kept asking how to do it.”
A big part of why I started this discussion is because I noticed others (and myself) expressed interest in this feature (owner ability to reset a discussion's solved status). If anyone want's to respond to that, please do.
Nobody's brought it up but my discussion's header question doesn't express what I'm talking about now. I would change it if I could. I'd encourage future contributors (if any) to read through the explanation of my question in the first post to understand my perspective beyond "How can a question marked as 'solved' be restored to unsolved status?"
Thank you all for your input!
Maybe you are looking for
-
Backward Compatibility of Acrobat 9 Pro and Pro Extended
if I make a pdf with a swf or mov. file in Acrobat Pro Extended, can someone with Acrobat 6 or 7 see those features when they open it up? Where is there a chart for these version differences on the website. I could not find it readily.
-
Hi Experts, New to XI.. Iam doing a bypass scenario.. I got the IDoc-XML from source and i need to route it to SAP system. There is no need of doing any design part for this scenario? No need of doing any mapping to acheive this?? No need to import i
-
Upgrading from K9A2 to AM3: What board for Win2k?
I know that anything having to do with Digital Rights Management won't work with Win2k, but I was wondering which AM3 socket board would offer "pretty good" support for Win2k in terms of drivers. In some instances there's simply no Win2k driver downl
-
How to get the current IR filter in form pagination?
Hi, In the 'Get Next or Previous Primary Key Value' process (form pagination) of a page there is an option to set an 'Optional WHERE clause'. Is there an easy way to get and set the current interactive report filter in the form pagination optional wh
-
I'm writing a program in VB that calls on a JAR file. It has been working great for weeks. Last night, I moved the JAR file to a new location on my machine, and it suddenly stopped working at all. I know nothing about Java. Do I need to recompile the