How to calculate moving average price?

hi,
i need someone to explain to me how to calculate moving average price

Hi,
Follow the Link,
Re: moving average price

Similar Messages

  • How to calculate moving average price(MAP) when price variance in IV

    Hi All,
    My current stock for a material is 39 and MAP is 0.8 GBP.
    A purchase order is created for the material for a quantity of 1 at price of 0.8 GBP per unit.
    Invoice is posted for the above PO at price of 1.74 GBP.
    What will be the new MAP for the material now??How to calculate MAP when there is a price variance in Invoice?
    Please suggest ASAP.

    Hi,
    The Procedure for calculating MAP is :-
    Case 1 :- PO at different price
    If in Material Master your MAP is 0.8GBP & closing stock of 30Nos, value is 24GBP
    In PO if the price is 0.9GBP & qty is 10nos, then after Goods Receipt Total Value of the GR i.e. Qty * Price + any other delivery cost will be added to the material stock value.  Qty is also updated.  New Total Value / New Stock Qty will be MAP.
    In this case Qty received 10 & price is 0.9 that means value would be 9GBP.
    Total Value becomes 24GBP (Present Stock) + 9GBP (Goods Receipt) = 33GBP
    Total Qty becomes 30Nos + 10Nos (Goods Receipt) = 40Nos
    MAP becomes = 33GBP / 44Nos = 0.75
    Case 2 : Invoice Posting (MIRO) at different price than PO
    While doing MIRO is we post at different price system will check whether sufficient stock posted in GR is available.  In the above case it is 10Nos,
    If it is there, then the above logic as in case 1 will take place
    If not available, to the extent of stock availability system will post the different value & adjust MAP & remaining is posted to Price Difference Account.
    In your case it would be like this :
    1. MAP 0.8 for 30Nos (Value would be 24GBP)
    2. Invoice Posting 1.74GBP for 1No.  That means value would be 24GBP + 1.74GBP = 25.74GBP
         Qty would be 30+1 = 40
         MAP = 25.74 / 40   = 0.64GBP
    Hope this clarifies your doubt
    regards,
    JP

  • How to get Moving Average Price ( MAP ) & Standered Price in BW

    Hi all,
    I want to get the Moving Average Price ( MAP) & Standered price in BW Report.So that please suggest me
    1. which Cube I have to use &
    2.  which datasource having that Moving Average Price ( VERPR) Field.
    If having other Procedure to calculate Moving Average Price in BW .
    please give me these details.
    Thanks,
    kiran

    Hi Kiran,
    0IC_C03 Cube can be used to bring the fields you require.
    Please search forum post by Anil Kumar, link is not available  thats why i am copying the text here.
    You need to enhance the Standard DS of Infoobject 0MAT_PLANT and Infoobject 0MAT_PLANT to include these 2 fields.
    And you need to enahance the 0IC_C03 cube to include 0MAT_PLANT and need to complete the mapping in all 3 Update rules for this added Infoobject.
    And you need to upload the attribute data of 0MAT_PLANT as full upload every day.
    In the reports , you need to dependent on Formula varibles with replacement path with standard price an MAP price attributes of 0MAT_PLANT. So if you go with these formula variables with replacement path, you should take 0MAT_PLANT characterstic into rows as a prerequiste.
    If you want to avoid this prerequisite, then take a look on How to calculate with attributes values.
    Other wise you need to do the calculations at 0MAT_PLANT level by a base query after every upload,and the result should be stored in TODS by APD .And then you can final report with out 0MAT_PLANT in rows upon this ODS.
    please see this links
    Re: 2lis_03_um and MBEW- STPRS
    Re: How to get Moving Average Prince and Standard Price in BW (inventory cube).
    Hope this Helps.
    Thanks
    CK

  • How change the moving average prices?If run costing done In the MR21 system

    hI,
    How change the moving average prices?If run costing done In the MR21 system notallowing the changing the prices?
    Regards
    Channa

    Hi
    Showingerror
    A current or future standard price exists for material 300000007
    Message no. CKPRCH025
    Diagnosis
    A current or future cost estimate exists.
    Procedure
    You can set the price of a marked cost estimate through the radio button 'Default Planned Prices' and release it by saving.
    Please what is the process changing moving aveerage prices

  • How to change moving average price with movement type 501

    Hi Gurus,
                         Our client procures stock item with P-Card and use the movement type 501 to receive into the stock. The value of these items are updated with the moving average price, most of the time the current purchase price is different than current moving average price, so client wants to change the moving average at the time of receiving the goods into the system. Can some one explain is it possible or not. If possible how can we adjust the price? Client doesnu2019t want to go modify the price with other transaction. They want to modify while receiving with MIGO.
    Thanks,
    Vikram

    Hi
    You need to goto transaction OMJJ, select the movement type as 501.
    Then double click on "Field selection-Enjoy transaction".
    Add the field EXWBR & make it optional.
    Now when you goto MIGO & enter 501 movement type you will find the Ext amount in LC field on Quantity tab page.
    Enter the amount in this field during the GR.
    Regards
    Prasad

  • How to get moving average price in 0ic_c03 with back dating

    Hi all,
            The stock overview report in 0IC_C03 gives stock values based on Purchase value where as i need to calculate the stock value based on Moving average price, (so that it tallies with R/3 std report MB52), also need to get the stock value for backdating also i.e like MB5B standard report in R/3.
      <removed by moderator>
    Thanks & Regards
    Suresh Putta & Ravi Y
    Edited by: Siegfried Szameitat on Jan 19, 2009 12:12 PM

    Hi,
    The stock overview report in 0IC_C03 gives stock values based on Purchase value where as i need to calculate the stock value based on Moving average price, (so that it tallies with R/3 std report MB52)
    --> Need to enhance 0IC_C03 for moving average price and need to multiple Quantity with price to get value. You can do this at extraction level(Transformation / update rules) or Query level.
    also need to get the stock value for backdating also i.e like MB5B standard report in R/3.
    Or Maintain material price as Material attribute and create a multiprovider on 0IC_C03 and Material and calculate value at query level. In this approach value getting derived based on available price only(means historic values may change if price changing over period of time).
    Srini

  • How to change Moving average price in accouting view at valuation cat level

    Hi,
    We are loading Material Master data for one client. We are using LSMW to load this object
    We have uploaded u201CMoving Price (MBEW-VERPR)u201D in Accounting 1 view at valuation category level. Unfortunately incorrect value has been loaded Is it possible to change??
    We donot have stock for this materials.
    When I tried to do this using MM02, I understand that itu2019s grayed out field and cannot be changed in second attempt.
    Let me know if there is any other procedure to handle the situation??
    Rajesh Chavan

    Hi
    You can change the same through MR21
    regards
    Sanil

  • Affect of discount on COGS and moving average prices

    Hi experts,
    I want your suggestion to build following scenario in SAP;
    Case: During purchase order, vendor has given special discount for a material when purchased for a specific customer.
    Requirement: I need to know following;
    1. How are those specific prices could be reflected in COGS?
    2. How do those specific prices affect the moving average price? is there any way to avoid this effect in the COGS?
    Thanks

    Hi Pirzada
    Considering that you are working with material ledger system will calculate moving average price doesn´t matter the discounts conditions you had during month.
    System will revaluate all consumption considering this moving average price.
    Maybe you could think about Splliting Valuation feature ou  Make to Sales Order scenario.
    These are ways to have a specific cost using the same part number.
    Regards
    Fred

  • VMI and moving average price

    Dear all
    Please help us.
    We will use moving average price as stock evaluation.
    Also, we manage all inventory is VMI stock.
    Our business process is the following procedure.
    1. We will increase consignment stock (VMI) without reference to purchase order.
    2. We will input sales order and allocate it to VMI stock.
    3. We will post goods issue, movement type 601-K.
    As you know, accounting documents post GR/IR at this time. Unfortunately, SAP does not calculate moving average price (MAP) in material master. ie. moving average price is zero.
    We would like to calculate moving average price because almost stock is VMI.
    How do you customize SAP?
    Best regards.

    You have to add one more step to handle this scenario as per my knowledge
    which is before you issue the stock using 601 K you have to take the stock in you own inventory and than issue using movement type 601 not 601 k.
    As per the std SAP the 601 K M type will never update the value  because that's not are stock
    you can see the setting below
    601     K     L                   2             VAX
    601     K     L          WA03     2     GBB     VAX
    601     K     L     E              2             VKA
    601     K     L     E     WA03     2     GBB     VKA
    601     K     L     P              2             VKA
    601     K     L     P     WA03     2     GBB     VKA
    601     K     L     V              2             VAY

  • Moving Average Price for Batch Maintenance

    Hi Experts,
          I've created material of which stock is maintain in batch (Valuation category = X & Price Control = V).
        Due to batch wise stock, system calculates the moving average price for different batches.
        Can we calculate moving average price at plant level inspite of maintaining material batch wise?
       Is there any other way by defining multiple storage bins for that material so that I can see the stock value differently with single moving average price value?
       Thanks.
                                                   Naimish.

    In MM03, you get the overall MAP for all batches of the material at plant level without mentioning valuation type in org. level. When specific valuation type is given, you can see its MAP / std price.
    Hope this clears the doubt.
    Regards,
    SAmeer

  • Chage Moving Average Price

    Dears,
    How to change moving average price in Material Master - as in MM02 it is grey out.  Thanks.

    Hi
    Check it in MR21
    Regards,
    Raman

  • Moving Average Price -COPC

    Hi all,
    How to configure moving average price in COPC?
    Is that in MM03 just put "V" there?
    Or got another setting in COPC configuration?

    also for 'S' the standard cost estimate is not a must. Just entering an S-price in MM01 or MM02 is also an option.
    best regards,
    Udo

  • How to view materials with selected moving average price

    Dear Gurus,
    How to view materials with moving average price greater than some selected value?  ie..Is there any report which takes moving average price as input?
    Thanks in advance,
    Sastry

    HI
    While checking any table or report u cannot give conditions (more than this value).
    If it mabe the case, down load the data from table MBEW - Field Name VERPR  to excel file. then u apply conditions, like greater than this value.
    U'll get the desired out put.
    Thanks
    Raman

  • Automatic MAP ( Moving average Price) in CDHDR - How to capture?

    Hi All,
    I have a requirement in which changes to Moving Average price ( MAP) needs to be send to another legacy system through custom MATMAS IDOC. Now when I make a change to MAP through MR21 or MM02 these changes are written in BDCP table and a change pointers are created and hence i am able to send them through IDOC. But when for a material the MAP changes through GR,GI Oor PO changes in such cases the MAP change being an automatic change it doesn't get captured in CDHDR and CDPOS table and hence no change pointers are created. I know CDDHR and CDPOS captures manual changes and not automatic changes. Could anyone please explain me in details how this problem can be resolved.
    Thanks ,
    Ameesha

    Hello,
    I doubt a GR,GI or PO can change the Moving Average Price.
    It should be only through MR21.
    Please check again.
    Rajeev

  • How to get Material Master Moving average price into Purchase Order

    Hi,
    How to get Material master moving average price into purchase order instead of Purchase Info record.
    Thanks,
    Sridhar

    Hi,
            I  cannot understand whether it is necessary .
           How about as following step?
                 1. create Purcahse requisition
                                Price come form moving average price in material master.
                 2. Create Purchase order reference Purchase  requisition
                                There is a setting  from the unit price of P/R onto the unit price of P/O.
      Regards,
         Gaito

Maybe you are looking for