How to call an include in a field Exit?

Hi Guys,
              i am having a doubt ,How to call an Include in a field Exit function module.
            i wrote as "include zxx_incl." but if i wrote like this in my Field Exit i am getting a Suntax error
"Recursive INCLUDE nesting in program "ZFLDEXIT_INCL". It contains an
INCLUDE statement which calls itself or a previously read program
("ZFLDEXIT_INCL                           ").
'                 i am having other doubt while creating an include program does we need to write a 1st statement as include zxx-incl within the same include ZXX_incl? if not i am getting a syntaxt error.
thanks,
Gopi.

Yes, thats the problem.
Your include is named ZFLDEXIT_INCL and in the first line of that include you probbaly wrote
include ZFLDEXIT_INCL.
Delete that, includes don't need a reserved word like programs and reports

Similar Messages

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

How to fetch values at runtime in field exit function module

Hi all,
I am creating a field exit for delivery date in Purchase requisition.
For that I need to capture Delivery Date and Sale Order entered in purchase requisition and pass this to Function module and validate this data.
I am using import and export parameters but it is giving runtime error.
please tell me how to solve it.
Regards,
Sunny

Hi,
There are other ways to access the purchase requisition related values..that is using field symbols..
pls check the below mentioned link:
Re: Pricing Routine : Can we get the VBAP Data in this pricing routine.(VOFM)
Identify the similar data fields for requisition.
Hope this wil help..
Sumit

How to edit the include in the user-exit

hi experts,
how to edit the include in EXIT_SAPMM07R_001 fuction module exit.
when i am trying to edit the incude include zxmbcu08 .
it was giving the message" Program names ZX... are reserved for includes of exit function groups ". at status bar.
what is the way to edit include the fuction module above specified.
what is the issue !
please post ur reply as early as possible.
Thanks in Advance ..,
Regards,
Hitu

Hi,
Are you creating the include for the first time??
If you are modifying the include..Probably you have to use the modification assistant..
In the application toolbar...There are button for INSERT, REPLACE, DELETE..
Place the cursor on the code...Then press INSERT button..
It will open a block in that place..
Thanks,
Naren

How to assign program/screen to a Field exit in ECC 5.0

Through program RSMODPRF i have given the dataelement and executed and created the function module and activated it.
1.Now in my Documentation its given to assign the field exit to a program/screen.How should do it(i meant to go to which transaction and procedure how to do it).
2.I also want to know whether the field exits can be created for sap's data elements only or even data elements starting with z.
Plz tell me if anyone knows answers to these.
Regards
Sajid

Hi,
Just execute RSMODPRF program without any entry in selection -screen,
then select ur dataelement and then press change and there u can define the program screen no in which u want to do this change to be activated.
Assign Program/Screen.
After giving the program name and screen name.. activae it..
Then it will work for only the program u gave in the dataelement assigning.....
not for all the programs it uses...
Cheers,
Simha.

How to call a include program in a BADI

Hi friends
I have implemented a BADI HRPBSIN_GET_LE_APPRV. In this BADI i want work item id. This BADI internally calls a function namely LHRPBSINLEAVE_ENCASH_RFCU04 and LHRPBSINLEAVE_ENCASH_RFCF01 this programs contains the work item id. But i dont no how to use.
I worte a code like this
DATA : PROGRAM_NAME LIKE SY-REPID VALUE 'LHRPBSINLEAVE_ENCASH_RFCU04', "'LHRPBSINLEAVE_ENCASH_RFCF01',
 STACK_NAME(107) TYPE C,
 VARIABLE_NAME(12) TYPE C VALUE 'WORK_ITEM'.
DATA: WI_ID TYPE SWW_WIID.
FIELD-SYMBOLS: <VARIABLE_SOUGHT> TYPE ANY.
CONCATENATE '(' PROGRAM_NAME ')' VARIABLE_NAME INTO STACK_NAME.
* CONCATENATE ' ' VARIABLE_NAME INTO STACK_NAME.
ASSIGN (STACK_NAME) TO <VARIABLE_SOUGHT>.
IF SY-SUBRC = 0.
 MOVE <VARIABLE_SOUGHT> TO WI_ID.
ENDIF.
UNASSIGN <VARIABLE_SOUGHT> .
But its not assiging to my field symbol <VARIABLE_SOUGHT>. always the sy-subrc = 4. So how to use that work item to call inside my BADI. I tried both the program in the PROGRAM_NAME. But the program is not passing the work item id to my variable.
Regards
vijay

hai why r using
assign (stack_name) to field symbol
just use
assign stack_name to field symbol
m.a

How to call a Include type Report Program in Executable Program. ?

Hi experts,
I have created a Include type report program and I want to run this include program in other report program. Which abap statement should i use ?
Thanks
Saurabh

Hi Saurabh,
We can make use of programs of Type - Include(I) in other type of ABAP Programs.
These Include programs cannot be executed directly but can be used as a part of the main program i.e Executable program - Type E.
So after creating your main program of type executable program then use the below line
REPORT ZM_SAMPLE_PROGRAM.
INCLUDE INC_PRG_NAME.
Now the code as availablein INC_PRG_NAME becomes part of the main program ZM_SAMPLE_PROGRAM.le
Also you can make use of this Include program in other executable/include programs too...
Regards,
Rafi

How to call original method from an overwrite exit?

I enhanced method m1 of class c1 by creating an overwrite exit for the method.
The requirement is to do certain checks in the overwrite exit and then call method m1 if checks pass. How can i access the original method from the overwrite exit??

keyword 'static' my friend.
public class foo {
public static void bar {
System.out.println ("hello");
foo.bar()

TabStrip and Field Exit......

Hi Friends,
I need the complete step by step working process of "Tabstrip and FieldStrip".Also any sample code will be highly appreciated.
Points will be rewarded for Requirement.
Thanx ,
Mandeep.

Hi,
TABSTRIP
Tabstrip is used to display multiple subscreens on the same area of the screen in designing transactions
see the links related to Module pool, in which you find the Tabstrip
Check the below link:
http://wiki.ittoolbox.com/index.php/FAQ:What_is_module_pool_program_in_abap%3F
http://help.sap.com/saphelp_46c/helpdata/en/35/26b1aaafab52b9e10000009b38f974/content.htm
http://sap.mis.cmich.edu/sap-abap/abap09/sld011.htm
http://sap.mis.cmich.edu/sap-abap/abap09/index.htm
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
http://help.sap.com/saphelp_webas630/helpdata/en/9f/db9cdc35c111d1829f0000e829fbfe/content.htm
http://www.sapdevelopment.co.uk/dialog/dialoghome.htm
http://www.sap-img.com/
http://help.sap.com/saphelp_46c/helpdata/en/08/bef2dadb5311d1ad10080009b0fb56/content.htm
http://www.sapgenie.com/links/abap.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c9/5472fc787f11d194c90000e8353423/frameset.htm
You can also check the transaction ABAPDOCU which gives you lot of sample programs.
Also you can see the below examples...
Go to se38 and give demodynpro and press F4.
YOu will get a list of demo module pool programs.
One more T-Code is ABAPDOCU.
YOu can find more examples there.
See the prgrams:
DEMO_DYNPRO_TABLE_CONTROL_1 Table Control with LOOP Statement
DEMO_DYNPRO_TABLE_CONTROL_2 Table Control with LOOP AT ITAB
http://www.geocities.com/ZSAPcHAT
http://www.allsaplinks.com/files/using_table_in_screen.pdf
FIELD-EXIT
http://www.erpgenie.com/abap/fieldexits.htm
http://www.sap-basis-abap.com/sapab014.htm
V4.6c onwards no longer supports field exits!!! In any case here's how to activate them:
Activation of the field exits and assignment of the dynpros is carried out using program RSMODPRF. For this purpose, the program must be started without parameters (input fields remain blank). If required, new field exits can be created using program RSMODPRF (see below for documentation).
Field Exits for Data Elements
Description
Maintenance transaction for creating and activating field exits
As part of the extension concept, SAP allows you to install a field exit for each screen field. Similar to the conversion exit, the system branches at the field exit at DCI (DATA COMMUNICATIONS INPUT) to a function module, if the field is an input field and a function code was triggered. The function module must adhere to the following naming convention:
Prefix: FIELD_EXIT_
Infix: <Data element name>
Suffix: _0 to _9 (optional), _A to _Z
The interface is automatically generated during the creation of the function module, and has 2 parameters:
Import parameter: INPUT
Export parameter: OUTPUT
After a function code has been triggered the contents of the field are made available to the FB via the "INPUT" import parameter. You can edit this and, when changed, make it available to the ABAP/4 processor in "OUTPUT". The input field contents are usually passed on: you can simply write OUTPUT = INPUT.
If, e.g., you have activated the field exit for the data element 'PROGRAM', then the fields of all the screens, which refer to the data element 'PROGRAM', branch to the function module FIELD_EXIT_PROGRAM. This includes the field 'Program' of the initial screen SAPMS38M0100 in transaction SE38, for example.
If you do not want the function module to be accessed from all screens, assign particular screens to the data element PROGRAM. By allocating an exit number, it is also possible to branch to other function modules with the corresponding suffix _0 ... _Z.
Example: You have assigned screen SAPMS38M0100 and exit number 5 to data element 'PROGRAM'. The corresponding field on SAPMS38M0100 branches to FIELD_EXIT_PROGRAMM_5.
As soon as you activate an exit, the corresponding screens are invalidated.
Note: Field exits are only taken into account during screen generation if the parameter abap/fieldexit = 'YES' is set in the system profile.
Requirement
Set the profile parameter abap/fieldexit = 'YES' before system start.
Limitations
The following ABAP statements are not allowed in the function modules of field exits:
BREAK-POINT,
CALL SCREEN, CALL DIALOG, CALL TRANSACTION, SUBMIT,
COMMIT WORK, ROLLBACK WORK,
COMMUNICATION RECEIVE,
EXIT FROM STEP-LOOP,
MESSAGE I, MESSAGE W.
Note:
Field exits cannot be edited with the debugger.
You should not use any external Performs in field exits. The ABAP processor shares the table work areas of externally called programs with those of the first caller. This could lead to errors at field exits that can hardly be analyzed, as field exits are sometimes slipped into the flow of the program at unforeseen events.
Questions and answers on field exits
1. A field exit was created with the CMOD and activated, but it does not get executed when the screen is called.
Since the field exit is not executed until DCI, some action must occur in the screen (e.g. press Return, saving....).
Set the abap/fieldexit profile parameter to YES and start the system again.
After the FIELD_EXIT... function module has been activated and the field exit has been activated, the transaction in whose screen the field exit is to be executed must be terminated. The screen is not generated until it is called.
Do not work on different application servers, otherwise there may be a delay before the field exit becomes active.
The profile parameter must be set either on all application servers or on none.
If the field exit is to be active in certain screens only, then you should check whether you have selected the correct program and the correct screen number (Careful with SUBSCREENS Do not rely on the F1 information for the field!
2. How does setting abap/fieldexit affect the performance?
If a screen is generated and the profile parameter is set, then the system checks in 2 tables (TDDIR, TDDIRS) to see whether a field exit has to be generated for the field. In practice the screen load after a Put is not generated until the screen is called. The user will not experience a noticeable delay, since screen generation is extremely fast.
3. Can the contents of other screen fields be read in a field exit?
In principle all fields can be copied to global variables in the TOP or the function group. However, since the order in which the field exits are called is not guaranteed, this possibility should not be used.
4. How does the field exit work in step-loop fields?
After data input to DCI the field exit will be called as many times as fields are visible on the step-loop. The SY-STEPL system variable is incremented each time. If a new value is assigned to be field, then it will be visible in the module between LOOP. ENDLOOP. This module will also be called as many times as there are visible step-loop lines.
5. Can field exits be debugged?
No. Field exits have to be tested in isolation in the development environment. To analyze problems that occur only in the screen environment, the relevant variables can be written to the file system using TRANSFER... and can be analyzed there.
6. What should one do if the field contents are not getting transported to ABAP/4?
Check whether you have assigned a value to the OUTPUT field.
7. When does the field exit get called in the case that there is a conversion exit attached to the data element?
The field exit will be called after the conversion exit. This means that the INPUT field contains the data in the same form as that in which the ABAP/4 program also gets them
Regards,
Priyanka.

Documentation about Screen, Menu and Field Exits

Hi all!!
I need some documentation about Screen, Menu and Field Exits.
I´m very interested specially on steps by steps.
My mail is [email protected]
Helpful posts will be rewarded.
Thanks in advance and regards,
Manuel.

Types of Exits 
There are several different types of user exits. Each of these exits acts as hooks where you can attach or "hang" your own add-ons.
Menu Exits
Menu exits add items to the pulldown menus in standard SAP applications. You can use these menu items to call up your own screens or to trigger entire add-on applications.
SAP creates menu exits by defining special menu items in the Menu Painter. These special entries have function codes that begin with "+" (a plus sign). You specify the menu items text when activating the item in an add-on project.
Screen Exits
Screen exits add fields to screens in R/3 applications. SAP creates screen exits by placing special subscreen areas on a standard R/3 screen and calling a customer subscreen from the standard screens flow logic.
Function Module Exits 
Function module exits add functions to R/3 applications. Function module exits play a role in both menu and screen exits.
When you add a new menu item to a standard pull down menu, you use a function module exit to define the actions that should take place once your menu is activated.
Function module exits also control the data flow between standard programs and screen exit fields. SAP application developers create function module exits by writing calls to customer functions into the source code of standard R/3 programs.
These calls have the following syntax:
CALL CUSTOMER-FUNCTION 001.
Field Exits
Field exits allow you to create your own programming logic for any data element in the Dictionary. You can use this logic to carry out checks, conversions, or business-related processing for any screen field. Example: The data element BBBNR identifies a companys international location number. You might want to set up your R/3 System so that all international location numbers are larger than 100.
The field exit concept lets you create a special function module that contains this logic.
You assign the special function module to the data element BBBNR. You then assign the module to any programs and screens in which users can add new international location numbers. When you activate your field exit, the system automatically triggers your special routine whenever a user enters a company location number.
In 4.6c, you can use "RSMODPRF" program to create field exits.
An example of a user exits :-
MODULE user_exit_0001 INPUT
 CASE okcode.
 WHEN 'BACK OR EXIT'.
 CASE sy-dynnr.
 WHEN '100'.
 SET SCREEN 0.
 LEAVE SCREEN.
 WHEN '200'.
**** Note that you can write any code that satisfy your needs. ****
**** But in this case, this was wrote as a sample code for reference sake. ****
**** And you can test it. ****
 SET SCREEN 100.
 LEAVE SCREEN.
 ENDCASE.
 ENDCASE.
reward points if it is usefull..
Girish

Increasing length of equvalnce number (BADI/field exits)

Hi friends,
Currently I have one requirement in which
I need to increase the length the Equivalnce number which is present on Apportonment to Co-products tab on Costing tab of material master.
Path for same is given below,
"Material Matser" screen >> "Costing1" Tab >> Click on "Joint Production" Button (it will bring to Cost Apportonment to Co-products:Apportionment Structures screen ) >> Click on "Equivalnce Numbers" ( it will bring to Cost Apportonment to Co-products:Equivalnce Numbers screen)
Currently length of euivalncve number (last column) is 3 as standard,In my requirnment I will have to increase the length.
How it could been done ? With field exits or BADI.
Regards,
Amit

Hi,
SAP provides as 18 charcter by default.
You can even use the reference field of House bank to put extra digits.
Account number BANKN - 18 + Reference info REFZL - 4.
While exporting the data use functional module CONVERT_HOUSEBANK_ACCOUNT_NUM and pass data in this.
This solution is valid only where you have new developments but need to check SAP standard reports for the flexibility.
John

The way how field exit gets called??????

Hi ALL,
Can any guru tell me how exactally the field exit works.
Senario- I have created field exit on Data element WERKS_EXT for user validation on plant level for T-code VA01.
Issue- I don't have proper user details in Dev. system to test this thing, for ulternative what i m doing is; I am running VA01 by putting brake point inside my Include for field exit to check it is getting called or not?
But the control is not coming to this field exit code and it is creating sales order .
I have checked, it is ACTIVE and GLOBLE for all screens.
So, please tell how exactally the field exit works and how i can test this?
Regards,
Rahul

Field exits can only be executed for fields that are directly related tothe dictionary. If the relation is indirect, i.e. via an ABAP declaration ( LIKE ), no field exit can be executed. Field exits cant be debugged.
For details on field exits, have a look at below link.
http://www.sap-img.com/abap/field-exits-smod-cmod-questions-and-answers.htm
http://www.sap-basis-abap.com/sapab014.htm
Best Regards,
Vibha
*Please mark all the helpful answers

How to include the new fields added in R/3 into ESS application

Hi Experts,
I have used Standred ESS application.After Importing the ESS application via bapi(Import the model),they have added some more additional fields in R/3 Backend. How to call those customized fields in our ESS application?
Please help me on this..
Thanks.

There is no specific document/book for the steps i told you....but i can list them as:
1) Goto the Models component in the Webdynpro ...right click -> create new model.
2) Specify the name of the Model as you like ....the RFC destinations...next.
3) Specify the userid and password with RFC authorization in ECC
4) Specify the name of the Function Module you want to import....and Import.
5) Goto the Fc component -> Used Models section and add the model created earlier here..
6) Goto the Fc Component -> Context Tab -> create new model nodes and attributes ...and bind them to Structure fields of the Function Module...
7) Goto the Fc Component -> Interface Controller -> create nodes and attributes ...and bind them to the attributes created earlier
8) Goto the Vc Component-> Context Tab -> create new context nodes and attributes....and bind them to the attributes in the Interface controller....make sure the Fc componentis added as a Used component in Vc.
9)Finally create UI Elements on the Detail or Review view and bind the text property of the element to the attributes created in the Vc component.
Hope it helps.
Shikhil

How to call hr_location_api.create_location for different address style with only those fields that belongs specific to that address style.

How to call hr_location_api.create_location for different address style with only those fields that belongs specific to that address style. It should decide at run time means at run time it will come to know the type of address style and based on that only the fields which belong to address details mapped to calling hr_location_api.create_location.
Thanks in advance.

You can create a wrapper package on top of the API (hr_location_api.create_location)
In the wrapper package you set all the values dynamically based on your requirements(say the style and add_line columns are populated on your conditions) and then you call the API.
Does that not work ?

How to link or call two FIELD EXIT

Hi Friends,
I've to do a Field exit object for MIGO...and my logic is i've to capture the meory id concept by Export and Import function.So, I heard that I've to create one field exit with Export function and again create under one more field exit to import the memory id from Export.
I know the logic of Export and Import.But i dont know how to fix it in the function module,means how to create one field exit and call the same under one more field exit.
Pls do the needful and post me with some good field exit examples for my reference.i.,e How to give codes inbetween Function and End Function. and how to call this field exit with one more field exit for import stmt.
if u find BADI or USER EXIT is good for MIGO,pls reply with good and correct example functions.
Thanks and regards
sankar.
Edited by: sankar babu on Dec 29, 2007 10:00 AM

Hello Sankar,
Just you want to use the functionaly Import and Export , that why you required two Fields Exit in transitation MIGO.
I suggest MIGO is huge transitation which conver some table like MSEG and BSEG which affect the performance of the program. Better you go with one field Exit . Although there are many Some are attach Below.
Re: MIGO Enhancement
Re: How to add field to MIGO Urgent??
SMOD enhancement MBCF0005 looks promising.
MBCF0002
MBCF0005
MBCF0006
MBCF0007
MBCF0009
MBCF0010
MBCF0011
MBCFC003
MBCFC004
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/QMIMIL/QMIMIL.pdf.
MB_DOCUMENT_BADI or MB_DOCUMENT_UPDATE
and these exits: MBCF0002, MB_CF001
Regards
Swati Namdeo

How to call an include in a field Exit?

Similar Messages

Maybe you are looking for