How to call category dimension in run logic
hai all,
i has an senario that i has to derive the category in datamanager prompt.
i has to pass the value into the run logic
how can i pass the catagory value which is derived in the datamanagar prompt to RUNLOGIC syntax
can any one help me out...
thanks,
Rajesh
Hello Rajesh,
i'm not sure that I've understand your question, but if you want to pass the category from the package to the lgf file you must add a prompt instruction to the package f.e. PROMPT(SELECTINPUT,,,"Please select category",%CATEGORY_DIM%) and in the script logic refers to it using
XDIM_MEMBERSET CATEGORY=%CATEGORY_SET% this works with all the dimensions, just substituting category with the other dimension names.
Please refers to Script logic/Rules Keyword Reference/Special Keywords
http://help.sap.com/saphelp_bpc70/helpdata/en/a6/69182aed2c4df78e3f7b9d586735ac/frameset.htm
Kind regards
Roberto
Similar Messages
-
How to call methods from within run()
Seems like this must be a common question, but I cannot for the life of me, find the appropriate topic. So apologies ahead of time if this is a repeat.
I have code like the following:
public class MainClass implements Runnable {
public static void main(String args[]) {
Thread t = new Thread(new MainClass());
t.start();
public void run() {
if (condition)
doSomethingIntensive();
else
doSomethingElseIntensive();
System.out.println("I want this to print ONLY AFTER the method call finishes, but I'm printed before either 'Intensive' method call completes.");
private void doSomethingIntensive() {
System.out.println("I'm never printed because run() ends before execution gets here.");
return;
private void doSomethingElseIntensive() {
System.out.println("I'm never printed because run() ends before execution gets here.");
return;
}Question: how do you call methods from within run() and still have it be sequential execution? It seems that a method call within run() creates a new thread just for the method. BUT, this isn't true, because the Thread.currentThread().getName() names are the same instead run() and the "intensive" methods. So, it's not like I can pause one until the method completes because they're the same thread! (I've tried this.)
So, moral of the story, is there no breaking down a thread's execution into methods? Does all your thread code have to be within the run() method, even if it's 1000 lines? Seems like this wouldn't be the case, but can't get it to work otherwise.
Thanks all!!!I (think I) understand the basics.. what I'm confused
about is whether the methods are synced on the class
type or a class instance?The short answer is; the instance for non-static methods, and the class for static methods, although it would be more accurate to say against the instance of the Class for static methods.
The locking associated with the "sychronized" keyword is all based around an entity called a "monitor". Whenever a thread wants to enter a synchronized method or block, if it doesn't already "own" the monitor, it will try to take it. If the monitor is owned by another thread, then the current thread will block until the other thread releases the monitor. Once the synchronized block is complete, the monitor is released by the thread that owns it.
So your question boils down to; where does this monitor come from? Every instance of every Object has a monitor associated with it, and any synchronized method or synchonized block is going to take the monitor associated with the instance. The following:
synchronized void myMethod() {...is equivalent to:
void myMethod() {
synchronized(this) {
...Keep in mind, though, that every Class has an instance too. You can call "this.getClass()" to get that instance, or you can get the instance for a specific class, say String, with "String.class". Whenever you declare a static method as synchronized, or put a synchronized block inside a static method, the monitor taken will be the one associated with the instance of the class in which the method was declared. In other words this:
public class Foo {
synchronized static void myMethod() {...is equivalent to:
public class Foo{
static void myMethod() {
synchronized(Foo.class) {...The problem here is that the instance of the Foo class is being locked. If we declare a subclass of Foo, and then declare a synchronized static method in the subclass, it will lock on the subclass and not on Foo. This is OK, but you have to be aware of it. If you try to declare a static resource of some sort inside Foo, it's best to make it private instead of protected, because subclasses can't really lock on the parent class (well, at least, not without doing something ugly like "synchronized(Foo.class)", which isn't terribly maintainable).
Doing something like "synchronized(this.getClass())" is a really bad idea. Each subclass is going to take a different monitor, so you can have as many threads in your synchronized block as you have subclasses, and I can't think of a time I'd want that.
There's also another, equivalent aproach you can take, if this makes more sense to you:
static final Object lock = new Object();
void myMethod() {
synchronized(lock) {
// Stuff in here is synchronized against the lock's monitor
}This will take the monitor of the instance referenced by "lock". Since lock is a static variable, only one thread at a time will be able to get into myMethod(), even if the threads are calling into different instances. -
How to call Controller from a Flow Logic Page
Hii
I am trying to call a controller from a flow logic page all in the same application.
I have done this by calling CREATE_CONTROLLER from the flow logic Event .
This is working fine,but the flow logic page appears even when the Contoller gets called & the controller view gets loaded.
I want to Navigate to the Controllers View .I tried this using NAVIGATE->next_page( ).But this is not working
Regards
Ajitabh.Hi Ajitabh,
I don't think that is right to call a controller using the flow-logic programing-model. You have to use the MVC programing-model. There it is possible an right to work with controller.
In flow-logic you just have to use pages you create in your bsp-application. Then you can navigate with the code:
CASE event_id.
WHEN 'button1'. navigate->goto_page( 'page2.htm' ).
ENDCASE.
The code in your layout should be like this for a button:
<input type="submit" name="OnInputProcessing(button1)" value="to-page-2">
Maybe this can help you -
How to call a subvi to run in background?
i have a timed loop which is gathering data and storing it in an array. when the array reaches a certain size, i would like to store it to a file while continuing to process new data into the array quickly. how can i pass the array to a file storage vi from within the loop without preventing the loop from continuing to iterate until the file access is complete? in other words, i would like to pass the data out of the loop and have the loop continue to run at the same rate while the data is written to a file as a lower priority task.
thanks.
Ben.Hi Ben,
...well, last-things first...
> if i call a subvi with an invoke node, i can set "wait until done" to false.... but then how do i pass the data?
Once you have a VI reference, you can us the "set Control Value" method to hand your array to the dynamically-called sub-VI, however...
What happens if the sub-vi doesn't finish by the time another 2D array is ready? (I know that's not supposed to happen, but what if?)
I think having a queue to which the entire 2D array is written as a single element would be better, and I doubt that launching a sub-vi and passing an array would be any more efficient than writing to an existing queue. To be honest, I don't know whether the call to the sub-VI will pass the array by value or by reference. If by value, then a copy is being created - why not create it in a queue? If by reference, then you have two sections of code writing to the same buffer at the same time - opening the door for data-over-runs.
In the old days, code took a big performance-hit by using Globals this way - frequent writes/reads. Your application seem to fit a "Producer/Consumer" paradigm - which is routinely implemented using queues.
With that much data, I'd be looking for ways to keep it in binary format for Excel - (LabVIEW uses a conventional binary representation for storing floats) - I'd be surprised if it isn't possible to keep it that way.
If anyone else has ideas to share, I'm happy to step aside.
bs05442 wrote:
here's a little more about my situation, and why i am not using a queue--
i am running two instances of the same dynamometer control application to allow a user to control a pair of dynos for tracked vehicle testing. each instance of this vi is gathering status and measurement data off a CAN bus. i want to log this data as well as (in the future) data from other control VIs running on the same computer. so i set up a global variable to which each vi writes it's measurement data, and i have a logging application periodically (up to 100Hz) capture the status of the entire global as a new row in a 2D floating point array. because i am adding a couple dozen elements each time the logger cycles, i did not want the performance hit of dynamically resizing the data structure to which i was storing the data, so i predfine the 2d array and then use an integer to store the index of the next row i want to write to. the problem comes when i fill up the array (64k lines, the most that excel will process from a csv file)--i would like to store it to a file without inturrupting the logging, but the conversion from float to string plus the file access time takes up too much time to handle inside an iteration of my logging loop. so i'd like to pass the array to another task which would take care of converting and storing it in the background.
i'm afraid if i store the data in a queue, the application might slow down once the queue gets too large, and i don't want to bog down the other control vis that are running on the same machine. if i call a sub vi to write that data, the current loop iteration does not complete until the file write is done and i miss a few periods of data. if i want to use a seperate loop to monitor the array size and perform the file access, i need to make the array available to both loops, which seems to require making it a hidden control on the front panel.... but then i have to access this large data structure via local variables, which will give me a huge memory hit, right? so i think what i would really like to do is pass the entire contents of the array off all at once to another vi, then let that vi store the data in the background while the fast loop continues to begin filling up its array again. if i call a subvi with an invoke node, i can set "wait until done" to false.... but then how do i pass the data?
thanks for any advice...
Ben.
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare) -
How to call abap proxy at run time?
hello frnds,
i m working on a scenario in which whenever Invoice is saved in SAP R/3 at that time same data should go to Oracle DB. i m using ABAP proxy on SAP R/3 side and JDBC receicver adapter on oracle side of XI.
so to post data i need to call ABAP Proxy whenever invoice is saved.. i have tried to find out save event for invoice but not able to get... can anybody tell me the solution that how i can call proxy at run time?
thanx in advance.
Regards,
Hetal.....Hi Audumbar,
Check these ...
/people/vijaya.kumari2/blog/2006/01/26/how-do-you-activate-abap-proxies
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
/people/vanita.thareja2/blog/2006/05/23/bpm-sending-message-asynchronously-and-getting-the-response-from-synchronous-system-using-abap-proxies
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
cheers,
Prashanth
P.S Please mark helpful answers -
How to "Call by Reference" when running in RealTime (path does not work)
I have a .vi which has been "uploaded" to a PXI chassis to run in RealTime.
I have this feeling that one of my sub-vi's are not functioning properly. I have a sub-vi which "Opens a VI reference" to a .vi located on my Windows harddrive. But, when everything is setup in Realtime, it cannot locate this .vi anymore.
I need to load a .vi dynamicaly, multiple times. Is there another way around it?Yes, that worked well. I had gotten it to work, but had not replied to this post to indicate my success. My actual problem had to do with me forcing a "close front panel". I had read in some other posts that you cannot modify front panels or other user-activity type of options when running real time. By removing the "FP Close" function, the call to the specific .vi worked great (and with the addition of the IP address for the opening of a local reference). Thanks again for all the input.
-
How to call a SM35 transaction and run in BDC report.
Hi Experts,
I knew that how to call a transaction but here, I've to call the SM35 transaction ,which have my BRS BDC recording, to run my session.
Pls help me how to call the transaction and run/process the first session tab in the table control of SM35 window.
thanks & regards
sankar.Hi,
Look up this example..here v have recorded one transaction & running it throough BDC report programming.
report ZBDC_16JUL2008
no standard page heading line-size 255.
include bdcrecx1.
DATA : BEGIN OF it_tab OCCURS 0,
LIFNR(016),
BUKRS(004),
KTOKK(004),
NAME1(035),
SORTL(010),
STRAS(035),
PFACH(010),
ORT01(035),
LAND1(003),
REGIO(003),
SPRAS(002),
TELF1(016),
AKONT(010),
FDGRV(010),
END OF it_tab.
start-of-selection.
CALL FUNCTION 'UPLOAD'
EXPORTING
CODEPAGE = ' '
FILENAME = 'D:\'
FILETYPE = 'ASC'
ITEM = ' '
FILEMASK_MASK = ' '
FILEMASK_TEXT = ' '
FILETYPE_NO_CHANGE = ' '
FILEMASK_ALL = ' '
FILETYPE_NO_SHOW = ' '
LINE_EXIT = ' '
USER_FORM = ' '
USER_PROG = ' '
SILENT = 'S'
IMPORTING
FILESIZE =
CANCEL =
ACT_FILENAME =
ACT_FILETYPE =
TABLES
data_tab = it_tab
EXCEPTIONS
CONVERSION_ERROR = 1
INVALID_TABLE_WIDTH = 2
INVALID_TYPE = 3
NO_BATCH = 4
UNKNOWN_ERROR = 5
GUI_REFUSE_FILETRANSFER = 6
OTHERS = 7
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
perform open_group.
LOOP at it_tab.
perform bdc_dynpro using 'SAPMF02K' '0105'.
perform bdc_field using 'BDC_CURSOR'
'RF02K-KTOKK'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RF02K-LIFNR'
it_tab-LIFNR.
perform bdc_field using 'RF02K-BUKRS'
it_tab-BUKRS.
perform bdc_field using 'RF02K-KTOKK'
it_tab-KTOKK.
perform bdc_dynpro using 'SAPMF02K' '0110'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-TELF1'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'LFA1-NAME1'
it_tab-NAME1.
perform bdc_field using 'LFA1-SORTL'
it_tab-SORTL.
perform bdc_field using 'LFA1-STRAS'
it_tab-STRAS.
perform bdc_field using 'LFA1-PFACH'
it_tab-PFACH.
perform bdc_field using 'LFA1-ORT01'
it_tab-ORT01.
perform bdc_field using 'LFA1-LAND1'
it_tab-LAND1.
perform bdc_field using 'LFA1-REGIO'
it_tab-REGIO.
perform bdc_field using 'LFA1-SPRAS'
it_tab-SPRAS.
perform bdc_field using 'LFA1-TELF1'
it_tab-TELF1.
perform bdc_dynpro using 'SAPMF02K' '0120'.
perform bdc_field using 'BDC_CURSOR'
'LFA1-VBUND'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPMF02K' '0130'.
perform bdc_field using 'BDC_CURSOR'
'LFBK-BANKS(01)'.
perform bdc_field using 'BDC_OKCODE'
'=ENTR'.
perform bdc_dynpro using 'SAPMF02K' '0210'.
perform bdc_field using 'BDC_CURSOR'
'LFB1-FDGRV'.
perform bdc_field using 'BDC_OKCODE'
'=UPDA'.
perform bdc_field using 'LFB1-AKONT'
it_tab-AKONT.
perform bdc_transaction using 'FK01'.
ENDLOOP.
perform close_group. -
How to Call a Crystal Report from Form 6i?
Dear All,
Can anybody tell me how to call a crystal report, designed using Crystal Report 9, in form 6i? I tried one solution by using the host command but it was not working properly. The code I was tried is like:
f_name varchar2(240);
f_name :='C:\Program Files\Crystal Decisions\Crystal Reports 9\crw32.exe D:\Form16\Form16_Rep\bin\Debug\Form_16_character_emp.rpt';
host(f_name);
This open the crystal report in design view. So how we call a report which run automatically like in .Net. How to pass the connection info of the database schema?
Thanks & Regards
SunilHi
First see the built in run_product function.
You can create a parameter list, add the
"MAXIMIZE" paramter in it and then call your
report with run_product passing your parameter list in it.
hence the called report will be maximized.
null -
How to call a logic package from another piece of logic
Hello Everyone,
I have two pieces of logic that I am running. One is a push to Finance logic that is in my payroll application (PushToFinance.lgx). It is supposed to push the data from Payroll to specific accounts within the Finance application. Within that logic I have a run logic statement that calls another piece of logic that is on the Finance application (ClearPayrollBalances.lgx). This logic is called to clear the destination application (finance) data intersections and then push the data values from Payroll to Finance. However, No matter where I put the run logic that calls the ClearPayrollBalances.LGX it clears the balances as the last step in my logic execution. I have commented it the Runlogic statement the data is pushed to the Finance application. I need to have the data intersections cleared before the Push. Any suggestions on how to make this work?
{******************************* Push Logic Here PushToFinance.LGX *************************************
//Planning - move data accumulated in InputorLoad member of DataSrc to the Finance App
//Clear Finance App
//Ran to clear data intersections in the Finance Application before Push to Finance Logic.
*RUNLOGIC
*APP=Finance
*LOGIC=ClearPayrollBalances.LGX
*ENDRUNLOGIC
*COMMIT
// Move Payroll Data to Finance App
*DESTINATION_APP=Finance
//Dims not used in Finance
*Skip_Dim=JobTitle
*Skip_Dim=PayPosition
//New Dimensions in Finance
*Rename_Dim PayAccount = AccountExp
//Select only the accounts to be pushed to Finance
*CALCULATE_DIFFERENCE=0
*Select(%PushAccnts%,"[ID]","PayAccount","FinAccount <>''")
*XDIM_MEMBERSET PayAccount = %PushAccnts%
*XDIM_MEMBERSET RptCurrency = LC //only get LC in case FX conversion is used in the future
*XDIM_MEMBERSET DATASRC = InputorLoad
*XDIM_MEMBERSET TIME = %PREFIX%.JAN,%PREFIX%.FEB,%PREFIX%.MAR,%PREFIX%.APR,%PREFIX%.MAY,%PREFIX%.JUN,%PREFIX%.JUL,%PREFIX%.AUG,%PREFIX%.SEP,%PREFIX%.OCT,%PREFIX%.NOV,%PREFIX%.DEC
*WHEN DATASRC
*IS InputorLoad
*REC(FACTOR=1,DATASRC=PAYAPP,PayAccount=PayAccount.FinAccount) //save to a different datasrc
*ENDWHEN
*COMMIT
********************************End Push Logic********************************
*******************************Begin Clear Logic ClearPayrollBalances.Lgx **********************************
//This is called from the Payroll application in the Destination (FINANCE) App
// Clear Payroll Balances before Payroll PushToFinance Logic populates Finance Application
// Calling logic passes the Organization set
*XDIM_DEFAULT ORGANIZATION=NOORGANIZATION
*XDIM_MEMBERSET ACCOUNT=A_90020000,A_90022000,A_90030000,A_90031000,A_90031500,A_90032000,A_90032500,A_90033000
*XDIM_MEMBERSET CATEGORY=BUDGETWORKING
*XDIM_MEMBERSET DATASRC=PAYAPP
*XDIM_MEMBERSET RPTCURRENCY=LC
*WHEN DATASRC
*IS PAYAPP
*REC(FACTOR=0)
*ENDWHEN}Thanks for the feedback. I figured out what you meant. I am adding it to Default logic and calling both pieces of logic from a new logic file. I am writing the steps out for others who may need it !
1. Create a separate logic file in Payroll called u201CPushtoFinanceu201D and add the Push section.
2. In your Default logic in Payroll, have two RUNLOGIC statements, first for the Finance Clear logic and then second for the Push Logic.
*RUNLOGIC
*APP=FINANCE
*LOGIC=ClearPayrollBalances.LGX
*ENDRUNLOGIC
*RUNLOGIC
*LOGIC=PushtoFinance.LGX
*ENDRUNLOGIC -
How can I run more than one VST on a PC slave running Logic 5.5?
I have moved from PC to Intel Mac (good!) and wish to run several non Intel VST apps from a slave PC running Logic 5.5 (ie Trilogy, Atmosphere).
My question is (and forgive my stupidity if the answer is obvious) how can I address each virtual instrument from the Mac? Currently I operate MidioverLAN CP which enables my PC computer to receive midi but I seem only to be able to access one instrument at a time, not permitting me to run several apps at once.
many thanks in advance for any kind helpLogic 5.5 is not an ideal VST host, as by default, only one virtual instrument is in Live mode, and you can't rig up environment solutions without a large latency (which makes it unusable).
There is a workaround involving putting a bypassed IO plugin on your instrument tracks, and then you can use environment cabling without the large latency (it tricks Logic into putting all instruments in Live mode). Then you'd cable your physical input through a channel splitter and onto the audio instruments to assign each a MIDI channel as has been discussed to death on this forum.
If there isn't a reason you must use Logic 5.5 PC to do this, then there are much better PC VST hosting apps and I recommend looking into them... -
How to call a jsp page from oaf and run in jDeveloper
Hi all,
I created sample jsp and then tried.
String temp = "sample.jsp?";
pageContext.setForwardURL(temp,
null,
OAWebBeanConstants.KEEP_MENU_CONTEXT,
null,
null,
true,
OAWebBeanConstants.ADD_BREAD_CRUMB_YES,
OAWebBeanConstants.IGNORE_MESSAGES);
It worked.
But when i tried with one of the custom page that i downloaded from server it is giving error.
But now i need to call that page.
Its Code is given on below link:
Re: how to call a jsp page from oaf
Please help me to do this.
Thanks in advance.
Regards,
RajRaj,
1. Hope you have placed the custom jsp page (which you have downloaded from server) under "jdevhome\jdev\myhtml\OA_HTML" directory ?
2. Try to run the custom jsp page from Jdeveloper directly and check whether its working properly or not ?
(i.e. add jsp page to any project in Jdeveloper then right click on jsp page and select Run xxx.jsp)
3. If page errors out then custom jsp page seems require few parameters to run it successfully. Pass all requied parameters and test.
4. There is no problem in the way you are calling jsp page from OAF page.
regards,
Anand -
I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?
I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone??? -
Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra.Can anybody help?
I am considering buying a new MAC laptop to run LOGIC for composition and band live/recording, but which one is best as I do not want to spend too much money?
Does it have a line in and how do you monitor sound?
Will I need adaptors and an interface?
Also, I am guessing as Logic only runs on MAC surely then they would not the best spec to recommend to run it?
I see all the upgrades as additional memory or a faster process?
Is a retina screen necessary, and why flash based storage against a 1TB hard drive, and a i5 instead of an i7
The main reason for this purchase is to play live and use backing tracks and record found sounds and make creative songs.
I hope you can provide some valuable feedback, as I am a longtime MAC user and see upgrades and changes happen regularly but the most important thing is the songs not the equipment.
I have £500 already and willing to add another 500 to 700 pounds, then software extra. -
How to call the Page Fragment in Page with Flow logic
Hi,
I am new to BSP, My requirement is to created 1 page fragment which contains the Logo. and to create 2 pages in flow logic
The logo has to apper in Pages with flow logic Pages. My question is how to call the PAge fragment in the 1 &2 pagesin page with flow logic
Thanks,
sureshSuresh,
There is a very enriching portal help.sap.com where you can find all basic and good documentation .
http://help.sap.com/saphelp_nw04/helpdata/en/77/8a54d7434ff34784272a3df98ab645/content.htm
the above link is from that portal.
Before asking such basic questions please at least try to find or do some research yourself.
There are standard applications like HTMLB_SAMPLES and SBSEXT_HTMLB and more for sample applications.
Regards,
Anubhav -
How to call the Application configuration in run time.
hi guru,
i have created two Application configuraton and it working fine.
my question how to call the application configuration in run time.
Example :
Based on the user i want to change the Application Configuration.like Super user and Normal user.
Advance thank's
Regard's
Vivekanathan.SHi,
Please try out this way-
Have a look at this table -
WDY_CONF_APPLU - (Customizing Data for Web Dynpro Applications).
after you are done with the configuration--
Ge the config id for the given application from this table. And depending on the user get an entry from this table and display accordingly.
Please refer to these links -
different default layouts for different CONFIG_IDs
Get WDCONFIGURATIONID
Regards
Lekha
Maybe you are looking for
-
How can I transfer all my music from the apple ID account on my dad's computer to my new computer without burning like a hundred CD's?
-
Can't play trailers with Quicktime 6.5.2
When I go to Apple's trailer site and click on the trailers, they don't start automatically. They used to but all of a sudden I only see a white background and the Quicktime logo in a square box. Does anybody know what the problem is? Windows XP Pr
-
itunes will not load on my ipad. Icon is there. When I open "Music", it shows itunes with no content briefly and then takes me back to home page. What to do?
-
Hi to all! When i save a file as "Flattened PNG" , the Export area is not working. FW (10.0.3.11, MacOS X 10.5.7) saves the complete image and not just the cropped area. But when i choose another file format (jpg) it saves just the expected area. Is
-
Changes are not good. Can I revert back.
Is it possible to delete iOS 7 and restore back to iOS 6? Very unhappy with the changes to many apps.