How to call new window and text element without changing print program
Hi Friends,
I have requirement like this . i have a standard print prog and custom form. i want add 2 to 3 extra windows in the form and i have to print some data. but how can v do this with out changing the print program. i know that to pick new fields through subroutines. but how can v call new windows and new text elements with out changing the print program.
usually in the print program we write as follows.
write_form
window = 'HEADER'
textelemtn = 'HEADER'
can we accomplish this one also through subroutines or any other way is there.
can any one pls suggest this.
Thanks in advance.
Rahul
u copy the standard print program and make custom program.
write your own codes in it.
assign this program in the place of standard print program.
Reward points, if helpful.
Similar Messages
-
How to open new window and generate oracle report from apex
Hi,
I had created an application that generates PDF files using Oracle Reports, following this Guide.
http://www.oracle.com/technology/products/database/application_express/howtos/howto_integrate_oracle_reports.html
And I followed 'Advanced Technique', so that users can't generate PDF file by changing URL and parameters. This is done for security reasons.
But in this tutorial, when 'Go' button is pressed, the PDF file is displayed on the same window of apex application. If so, user might close the window by mistake. In order to avoid this, another window have to be opened.
So, I put this code in the BRANCH - URL Target. (Note that this is not in Optional URL Redirect in the button property, but the branch which is called by the button.)
javascript:popupURL('&REPORTS_URL.quotation&P2100_REP_JOB_ID.')
But if the button is pressed, I get this error.
ERR-1777: Page 2100 provided no page to branch to. Please report this error to your application administrator.
Restart Application
If I put the code 'javascritpt ....' in the Optional URL Redirect, another window opens successfully, but the Process to generate report job is not executed.
Does anyone know how to open new window from the Branch in this case?G'day Shohei,
Try putting your javascript into your plsql process using the htp.p(); procedure.
For example, something along these lines should do it:
BEGIN
-- Your other process code goes here...
htp.p('<script type="javascript/text">');
htp.p('popupURL("&REPORTS_URL.quotation&P2100_REP_JOB_ID.")');
htp.p('</script>');
END;
What happens is the javascript is browser based whereas your plsql process is server based and so if you put the javascript into your button item Optional URL Redirect it is executed prior to getting to the page plsql process and therefore it will never execute the process. When you have it in your branch which normally follows the processes, control has been handed to the server and the javascript cannot be executed and so your page throws the error "Page 2100 provided no page to branch to"... By "seeding" the plsql process with the embedded javascript in the htp.p() procedure you can achieve the desired result. You could also have it as a separate process also as long as it is sequenced correctly to follow your other process.
HTH
Cheers,
Mike -
How to save new edits and text to photo without creating a new file
I am a new user of PSE 7. I am able to enhance and add text to my photos but can't save the edits without creating a new PSD PSE file in addition to the original unedited photo. How do I save the phto itself as edited?
99jon wrote:
If you really want to make your changes irreversible then use “Save As” and select file type from the dropdown list e.g. jpeg and enter the exact same file name as the original. Click OK to save and OK to overwrite the original.
While this of course is the answer to the question, the idea of overwriting the original is simply a bad idea. If you do this, you can never get back to your original and start again. That text will always be there.
I advise the original poster not to do this. Save your edits as a different name. -
How to change a SAP script output without changing Print Program
Hi,
I want to change output of standard PO report printing object. I have to change the ZSAPSCRIPT but I have to keep the print program intact. please give me ideas.Hi for that you have to do following.
1. Create a ZPROGRAM
2. Write a Perform in your SAP Script.
3. Write Form inside it your ZPROGRAM.
Hope this will help you.
<i><b>Reward points for helpful ans.</b></i> -
I want to change the size and color of text in call out boxes and text boxes. How can I do this? Jack
Highlite the text inside the text box and then press Ctrl+E.
-
I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific folder. it looks like it downloads. It then keeps taking me back to this page. Im not sure where to go next
if you have a win os you should have dl'd an exe and a 7z file.
put both in the same directory and double click the exe. -
I have a late 2011 Macbook and whenever I open any application it opens only the top menu bar and no viewer windows.I always have to click cmd n to open new windows and it is quite annoying.Does anyone know how to fix this issue? Thx
You may have more of a chance getting a quicker answer here:
https://discussions.apple.com/community/windows_software/windows_compatibility -
Question
When I am NOT private browsing Firefox will not allow me to delete or change the website address in the location bar. My only remedy is to open a new window and search in google then click the link to that site through google. When I swap to private browsing firefox allows me to anter the website address directly into the location bar - but this is a slow [prcess to swap back and forth - also by dint of using private browsing I loose my website information.Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How to start new messages and replies using text format only?
Hallo,
I would like to start typing a new message in text format without the need to type every time the key option shift command T.
The same, when I reply to a message I would like to use text only.
I have played with the preferences but any of them seems able to do what I want.
Is it possible to customize this in mail?
thanksThanks for the help,
I have already made these changes, but I was still having sign differences.
So what I have done now is go to preferences signs and for each account sign I have removed the option "use always my default font" and I have changed all signs font to the same of plain text.
I am trying now... seems better but I am not still sure that it is plain text.
thanks -
How to open new window 640x520
When a user clicks on a button I want a 640 x 520 new window
to open, preferably without the browser address bar. You can see
the problem I'm having using target "blank" if you go to
http://movingcircles.com/ and
click on the first button (for Grand Entrance.) BTW if you go
there, please let me know how the flash file is playing for you.
Thanks.Hi David --
I've used a DW extension called "Popup Link" with great
success. You can
specify not only the size of the pop-up, but you can also
position it on the
screen as well as determine which window attributes (address
toolbar, status
bar, etc.) are displayed.
You can find it here:
http://www.flevooware.nl/dreamweaver/extdetails.asp?extID=8
HTH
John
"David Mainstreet" <[email protected]> wrote
in message
news:fca10s$399$[email protected]..
> When a user clicks on a button I want a 640 x 520 new
window to open,
> preferably without the browser address bar. You can see
the problem I'm
> having
> using target "blank" if you go to
http://movingcircles.com/ and
click on
> the
> first button (for Grand Entrance.) BTW if you go there,
please let me
> know how
> the flash file is playing for you. Thanks.
> -
How can I install new windows on NB200-10z without a CD drive?
Hi,
I have a mini laptop "Toshiba nb200-10z" and it doesnt startup anymore.
I would like to do a recovery, but it also doesnt work.
I know there is a shortcut like press the 0 button when the laptop is starting up.
With this shortcut you can start the recovery to reset the software.
But when I press the 0 button it gives me an error.
So I think the recovery drive/partition is lost.
How can I install new windows on this minilaptop without a CD drive?I have found a much easier way to install Windows 7 from a USB Flash drive. Unlike other methods where you have to write complicated commands, this method can be completed even by those who have very little computer background.
The whole process takes only two steps, run UNetbootin, load the Windows 7 ISO file, and finally restart your computer.
Before you begin, you will require the following:
USB Flash Drive (4GB minimum)
Windows 7 ISO Image file
UNetbootin
Note: If UNetbootin doesnt work, try out the Microsofts official tool called Windows 7 USB/DVD Tool.
Now insert the USB drive, run UNetbootin, and select Disk Image as ISO. Browse your local drive for Windows 7 ISO that you downloaded and click Open. Now Select Type as USB and choose the drive. Once done, it will look like a bit similar to the screenshot shown below.
Click OK and it will begin extracting all installation files to the USB drive. The whole process will take some time (10-15 minutes), so have patience.
Once the installation is complete, reboot your computer. Now while your system is starting up press the appropriate button (usually F1, F2, F12, ESC, Backspace, or Escape) to bring up Bios Boot Menu.
Change the startup order to boot USB by default, usually you will have to press F6 to move the selected USB device on top. Once done, save changes and restart the system.
+Message was edited: link has been removed+ -
How can I syncronize Lightroom and Photoshop Elements data?
How can I syncronize Lightroom and Photoshop Elements data?
Hi Palsaran,
As i understood, your requirement is to POST data from UI to backend.
The above code you given is not correct if you want to use model based implementation.
In UI5 you don't need to do an explicit Ajax call, for which we can use Models like OData, JSON etc.
For your JSON example, you can use like,
var oModel = new sap.ui.model.json.JSONModel();
var oData = "YOUR JSON DATA";
oModel.setData(oData)
oModel.loadData(yourURL/Entityset,"POST");
For ref, you can use the below link
JsDoc Report - SAP UI development Toolkit for HTML5 - API Reference - sap.ui.model.json.JSONModel
Thanks
Naveenraj -
How to open new window without loosing pageFlow context?
I am using 8.1 SP 3.
Here is what I need to do. I have a an anchor link in a jsp that needs to open a new window after executing an action in a page flow. That action forwards to a jsp that needs to be able to access pageFlow variables.
So, I have the following:
<netui:anchor target="_blank" action="timesheetSubmitView">
Everything works fine, that is it opens a new window and keeps the pageFlow content, BUT the new window contains all of the portlets that were on the original page. What I need is a new window that just contains the jsp that my action forwards to.
I looked through the various topics on this forum, but the recomended approach posted by someone to enable redirect does not work because weblogic is loosing the pageFlow context, so jsp errors out due to the fact that variable on a pageFlow is null.I had the same issue. A couple different things to try -
1. There is a property called redirect in the action. Set it to true.
That did not work for me, so I just used pageFlow variables and put things into the session. Bad way of doing it, but works :)
In the action that loads the first JSP, put things into the session. Then in the timesheetSubmitView action get the stuff from the session.
Write an onDestroy method that deletes the session stuff, when u are done with it. -
How do I share windows and iOS on my MAC book pro
how do i share windows and iOS on the same hard disk on my MAC? will each of the operating system see the whole disk?
Either you don't understand or misuse just what iOS is, it is only found on iPad, iPhone, iPod and does not run on Macs in any way, and as far as we here the only operating system of interest is Mac OS X Lion 10.7.5 or above.
There are forums for iPad and if you have a notebook then you want MacBook Pro forum.
As for Windows, there is a forum for "Boot Camp" to set aside and use part of your hard drive for Windows to run natively.
MacBook Series Forums
https://discussions.apple.com/community/notebooks?view=discussions
http://www.apple.com/support/ipad
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Learn more about how Mac computers can run Windows 8 using Boot Camp 5.
http://support.apple.com/kb/HT5628
Products Affected
Boot Camp, Windows 8
General installation questions
What is Boot Camp 5?
Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see this article.
http://support.apple.com/kb/HT5639
Which Macs support Windows 8?
MacBook Air (Mid 2011 or newer)
MacBook Pro (Mid 2010 or newer)
Mac Pro (Early 2009 or newer)
Mac Mini (Mid 2011 or newer)
iMac (27-inch, Mid 2010 or Mid 2011 or newer)
For more information, see this article.
What are the System Requirements for Windows 8?
Please see this article.
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide. -
When I open a check picture from my bank register it opens in a new window and I cannot print from that window. I want to be able to print to the pdf printer so that I can save a copy of my check to the hard drive. I do not have any access to any printers from this window that Firefox opens. It works fine in Internet Explorer and Google Chrome. Any ideas on how to resollve this?
There are other things that need your attention.
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the Flash plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
*http://helpx.adobe.com/flash-player.html
Maybe you are looking for
-
Probleme application bundle javaFx mac osx
Hi, I have developed an javafx application (netbeans 7.1.2). When I execute the jar file in the dist folder, the application launch and works fine. I tried to bundle it with jar bundler but when I launch the application I have this message : JavaFX 2
-
Error when using comma in number range
when i use the comma character in a table, in use with some formulas i am getting an error. pages thinks that the comma character is a string. here in the netherlands we use the comma, as a seperation character for our numbering. (like this 7,80) doe
-
Hello All, Could anyone please help me to get my control file back. While opening the database I am getting below error. SQL> startup ORACLE instance started. Total System Global Area 835104768 bytes Fixed Size 2217952 bytes Variable S
-
My iphone is disabled and itunes is asking password i don't remember it
my iphone is disabled and itunes is asking password and i don't remember it
-
We have a scenario, where we want to send Payroll data to our Payroll vendor, who also uses SAP. We are looking at Idoc2Idoc communication in this regard. As this is confidential data, client is worried about the data safety. What are measures taken