How to call the collaboration service send e-mail

Hello,
Im trying to call the send e-mail link command (clpGWSendMailLink) via an htmlb button.
Does anybody know how to call a link command or a command group via an htmlb control? Or is there another way to realize?
I couldnt find any information. I also tried to find out which URL is called. But it also ended in smoke.

Hi Ardiles,
first, welcom on SDN!
I'm almost sure that there is no trick to call this hardcoded. Please imagine that these commandos are totally embedded within the FlexUI framework, which cares about calling the commands etc.
On the other hand, you can use the service without using the (FlexUI) command. Then you have to care about the visual side on your own but you can use the mailing logic of the service.
Hope it helps
Detlev
PS: Please consider rewarding points if the answer helps. Thanks in advance!

Similar Messages

How I fixed the "can't send e-mail after upgrade to 10.5.6" problem

Like many of you I couldn't send e-mail after the upgrade. After trying everything including re-install combo update, delete and resetting profile, etc. the thing that made it work was:
1. custom set the outgoing server port number to 25 (for Verizon, ask your ISP the output port number)
2. ensure the password authentication is set for outgoing e-mail.
Goto account setting, "Outgoing Mail Server (SMTP)", select "Edit Server list"
Under "Account Information" make sure "Description" is blank (as suggested in other posts)
Under "Advance Information", select Use Custom Port: type in the port number
On Authentication, select password, type in user name and password as in "incoming Mail Server"
Save it and test if it works.
It seems selection of the default outgoing port has some problems, even though 15 is one of the three defaults.
Scott

I just switched to Roadrunner and am having the same "can't send email" problem. I have done what you suggested, but the problem persists. I did note that in my outgoing mail server box it says: smtp-server.wi.rr.com:jzelinger3 (Offline). I'm not sure where the "Offline" is coming from or why it is there. Any suggestions? I performed the following Terminal tests with a tech. support person from Roadrunner:
Last login: Wed Jan 21 19:36:52 on console
CPE-75-86-226-41:~ joan$ telnet pop-server.wi.rr.com 110
Trying 71.74.56.78...
Connected to pop-server.wi.rr.com.
Escape character is '^]'.
+OK POP3 server ready.
user [email protected]
+OK please send PASS command
pass laikatess
+OK [email protected] is welcome here
telnet smtp-server.wi.rr.com 25
-ERR Invalid command; valid commands: CAPA, DELE, LIST, LAST, NOOP, RETR, RSET, STAT, TOP, UIDL or QUIT
This is very frustrating.
J. A. Zelinger

How to call the webservice in abap program

Hi All,
I have created a web service for my RFC . The RFC has Import and export paramaters.
I want call the same web service into my ABAP REPORT and at the same time i want pass the values to webservice and get the result from webservice in my abap report,
Please help me how to call the web service and pass the values and get the values?
Highly appreciate your assitance.
Thanks,
Kishan

Hi Kishan,
You can refer to following help document,
http://help.sap.com/saphelp_nw04/helpdata/en/bf/d005244e9d1d4d92b2fe7935556b4c/content.htm
Regards,
Meera

How can i cancel order from HONG KONG apple Online Store? i tried to call the customer service hotline in 1/11/2013 (3pm to 6pm) and no any apple specialist reply and answer me? How can i do now ? Pay for useless????

How can i cancel order from HONG KONG apple Online Store? i tried to call the customer service hotline in 1/11/2013 (3pm to 6pm) and no any apple specialists reply and answer me? How can i do now ? Pay for useless?

You may also be able to access https://store.apple.com/ in Safari, log into your account, and review recent purchases (and cancel any that haven't shipped yet).

How is called the Services "OpsMgr Health Service" in the SCOM 2012 and Client machine?

Hi,
Can anybody tell me how is called the Services of OpsMgr Health Service in the SCOM 2012?
I have installed the agent of scom2012 on my client computer. But I dont find any agent called "OpsMgr Health Service" on the Client machine?
Regards

Hi
If you look in the services.msc window then it is listed as the System Center Management Service. This is the display name.
The actual service name is HealthService
Cheers
Graham
Regards Graham New System Center 2012 Blog! -
http://www.systemcentersolutions.co.uk
View OpsMgr tips and tricks at
http://systemcentersolutions.wordpress.com/
The Ayman answer is god, It is called "Microsoft Monitoring Agent"

How to call a SAP service from adobe flex

Hi experts,
I need to call a webservice create from SAP BAPI my URL is: http://xxxxxxxxx:8000/sap/bc/srt/wsdl/bndg_DD90E166ACE1B1F18AD8001B789FF0AD/wsdl11/allinone/ws_policy/document?sap-client=200, with this URL I can test the webservice from WsNavigator.
The operation is ZimrfcVerifOtUbica and the input structure is:
ZimrfcVerifOtUbica
> PiNumeroAlmacen (input parameter)
> PiOTransporte (input parameter)
The output structure is:
ZimrfcVerifOtUbicaResponse
>PoMessage (output parameter)
I've created a view with two inputfield (one to PiNumeroAlmacen, one to PiOTransporte), one button and one label (to put the result value).
but I don't know how to call the WS, I tried with this code:
<mx:WebService id="ZCCONVERTERService"
     wsdl="http://xxxxxxxxx:8000/sap/bc/srt/wsdl/bndg_DD90E166ACE1B1F18AD8001B789FF0AD/wsdl11/allinone/ws_policy/document?sap-client=200;" useProxy="false" >
          <mx:operation name="ZimrfcVerifOtUbica" resultFormat="e4x">
               <mx:request >
                    <PiNumeroAlmacen>AGR</PiNumeroAlmacen>
                    <PiOTransporte>01000</PiOTransporte>
               </mx:request>
          </mx:operation >
     </mx:WebService>
and I get this error: [RPC Fault faultString="Could not load WSDL" faultCode="Server.NoServicesInWSDL" faultDetail="No <wsdl:service> elements found in WSDL at ."].
I tried with actionscript and runtime library but I get this error: java.lang.Exception: Unsupported element in WSDL file: UnknownExtensibilityElement
I tried put in Data--> Import Web Service and I put the URL and I get Unable to load the WSDL. Specify another URI.
Other thing is for this webservice I've created a logic destination, and this webservice is used in a webdynpro aplication and works correctly. But now I need to use the same webservice in flex.
Could you help me to call to this webservice?
Thanks in advance.
Jose

I have could do it, but now I'm trying to do the same with a SAP standard service.
Any idea?
Regards,
Jose

I created a form and I'm not sure how to make the 'submit' button send me the collected information.

Hello everybody. I am a web designer (NOT a developer)
I created a form and I'm not sure how to make the 'submit' button send me the collected information.
I have used phpform.org/ to custom build a submission form. Then I opened that html in dreamweaver (so that I could edit colors, fonts, and delete the phpform.org advetisement)
Now I need to link the 'submit button' so that it will e-mail me the completed form.
(formphp.org wants me to subscribe to a servie that I pay for in order to have the form e-mailed to myself.)
(after I get the submit button linked to an e-mail I will pull the html of my completed form into Muse- but I don't think that is really relevent)
I'm sure one of you can help point me in the right direction! I can't write my own code so detailed help is appreciated!
-Brenna
The e-mail I would like the form sent to is:
[email protected]
Here is the the code for my form 'as is' :
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8">
<title>Create a Profile</title>
<link rel="stylesheet" type="text/css" href="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.css" media="all">
<script type="text/javascript" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/view.js"></script>
</head>
<body id="main_body" >
          <img id="top" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/top.png" alt="">
          <div id="form_container">
                    <h1><a>Create a Profile</a></h1>
            <form id="form_836144" class="appnitro" enctype="multipart/form-data" method="post" action="">
                    <div class="form_description">
                              <h2 align="center">Create a Tommy Lemonade Profile</h2>
                              <p></p>
                    </div>
                      <ul >
                                          <li id="li_1" >
                    <label class="description" for="element_1">Name </label>
                    <span>
                              <input id="element_1_1" name= "element_1_1" class="element text" maxlength="255" size="8" value=""/>
                              <label>First</label>
                    </span>
                    <span>
                              <input id="element_1_2" name= "element_1_2" class="element text" maxlength="255" size="14" value=""/>
                              <label>Last</label>
                    </span>
                    </li>                    <li id="li_23" >
                    <label class="description" for="element_23">Service Provider Type </label>
                    <span>
                              <input id="element_23_1" name="element_23_1" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_1">Barber</label>
<input id="element_23_2" name="element_23_2" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_2">Hairstylist</label>
<input id="element_23_3" name="element_23_3" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_3">Nail Technician</label>
<input id="element_23_4" name="element_23_4" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_4">Massage Therapist</label>
<input id="element_23_5" name="element_23_5" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_5">Skin Care</label>
<input id="element_23_6" name="element_23_6" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_6">Esthetician</label>
<input id="element_23_7" name="element_23_7" class="element checkbox" type="checkbox" value="1" />
<label class="choice" for="element_23_7">Make Up Artist</label>
                    </span><p class="guidelines" id="guide_23"><small>Select all that apply.</small></p>
                    </li>                    <li id="li_19" >
                    <label class="description" for="element_19">Top 5 services </label>
                    <div>
                              <textarea id="element_19" name="element_19" class="element textarea medium"></textarea>
                    </div><p class="guidelines" id="guide_19"><small>Please list your top 5 services</small></p>
                    </li>                    <li id="li_20" >
                    <label class="description" for="element_20">List all services you offer & thier starting price </label>
                    <div>
                              <textarea id="element_20" name="element_20" class="element textarea medium"></textarea>
                    </div><p class="guidelines" id="guide_20"><small>please use a new line for each service. You can do this by pressing 'enter' after each starting price.
</small></p>
                    </li>                    <li id="li_12" >
                    <label class="description" for="element_12">Personal Phone </label>
                    <span>
                              <input id="element_12_1" name="element_12_1" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_12_1">(###)</label>
                    </span>
                    <span>
                              <input id="element_12_2" name="element_12_2" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_12_2">###</label>
                    </span>
                    <span>
                               <input id="element_12_3" name="element_12_3" class="element text" size="4" maxlength="4" value="" type="text">
                              <label for="element_12_3">####</label>
                    </span>
                    <p class="guidelines" id="guide_12"><small>Only fill in if you want clients to be able to contact you on your personal phone line rather than the phone at your place of employment. </small></p>
                    </li>                    <li id="li_21" >
                    <label class="description" for="element_21">E-mail (Required) </label>
                    <div>
                              <input id="element_21" name="element_21" class="element text medium" type="text" maxlength="255" value=""/>
                    </div><p class="guidelines" id="guide_21"><small>Staff at Tommy Lemonade will use this e-mail as your primary contact information. it will also be seen by your potential clients.</small></p>
                    </li>                    <li id="li_6" >
                    <label class="description" for="element_6">Confirm your e-mail (Required) </label>
                    <div>
                              <input id="element_6" name="element_6" class="element text medium" type="text" maxlength="255" value=""/>
                    </div><p class="guidelines" id="guide_6"><small>Please re-type your e-mail address</small></p>
                    </li>                    <li id="li_3" >
                    <label class="description" for="element_3">Web Site </label>
                    <div>
                              <input id="element_3" name="element_3" class="element text medium" type="text" maxlength="255" value="http://"/>
                    </div><p class="guidelines" id="guide_3"><small>If you don't have your own website feel free to link your professional Facebook, Google+ etc... </small></p>
                    </li>                    <li id="li_4" >
                    <label class="description" for="element_4">Place of employment </label>
                    <div>
                              <input id="element_4" name="element_4" class="element text medium" type="text" maxlength="255" value=""/>
                    </div>
                    </li>                    <li id="li_2" >
                    <label class="description" for="element_2">Work Address </label>
                    <div>
                              <input id="element_2_1" name="element_2_1" class="element text large" value="" type="text">
                              <label for="element_2_1">Street Address</label>
                    </div>
                    <div>
                              <input id="element_2_2" name="element_2_2" class="element text large" value="" type="text">
                              <label for="element_2_2">Address Line 2</label>
                    </div>
                    <div class="left">
                              <input id="element_2_3" name="element_2_3" class="element text medium" value="" type="text">
                              <label for="element_2_3">City</label>
                    </div>
                    <div class="right">
                              <input id="element_2_4" name="element_2_4" class="element text medium" value="" type="text">
                              <label for="element_2_4">State / Province / Region</label>
                    </div>
                    <div class="left">
                              <input id="element_2_5" name="element_2_5" class="element text medium" maxlength="15" value="" type="text">
                              <label for="element_2_5">Postal / Zip Code</label>
                    </div>
                    <div class="right">
                              <select class="element select medium" id="element_2_6" name="element_2_6">
                              <option value="" selected="selected"></option>
<option value="Afghanistan" >Afghanistan</option>
<option value="Albania" >Albania</option>
<option value="Algeria" >Algeria</option>
<option value="Andorra" >Andorra</option>
<option value="Antigua and Barbuda" >Antigua and Barbuda</option>
<option value="Argentina" >Argentina</option>
<option value="Armenia" >Armenia</option>
<option value="Australia" >Australia</option>
<option value="Austria" >Austria</option>
<option value="Azerbaijan" >Azerbaijan</option>
<option value="Bahamas" >Bahamas</option>
<option value="Bahrain" >Bahrain</option>
<option value="Bangladesh" >Bangladesh</option>
<option value="Barbados" >Barbados</option>
<option value="Belarus" >Belarus</option>
<option value="Belgium" >Belgium</option>
<option value="Belize" >Belize</option>
<option value="Benin" >Benin</option>
<option value="Bhutan" >Bhutan</option>
<option value="Bolivia" >Bolivia</option>
<option value="Bosnia and Herzegovina" >Bosnia and Herzegovina</option>
<option value="Botswana" >Botswana</option>
<option value="Brazil" >Brazil</option>
<option value="Brunei" >Brunei</option>
<option value="Bulgaria" >Bulgaria</option>
<option value="Burkina Faso" >Burkina Faso</option>
<option value="Burundi" >Burundi</option>
<option value="Cambodia" >Cambodia</option>
<option value="Cameroon" >Cameroon</option>
<option value="Canada" >Canada</option>
<option value="Cape Verde" >Cape Verde</option>
<option value="Central African Republic" >Central African Republic</option>
<option value="Chad" >Chad</option>
<option value="Chile" >Chile</option>
<option value="China" >China</option>
<option value="Colombia" >Colombia</option>
<option value="Comoros" >Comoros</option>
<option value="Congo" >Congo</option>
<option value="Costa Rica" >Costa Rica</option>
<option value="Côte d'Ivoire" >Côte d'Ivoire</option>
<option value="Croatia" >Croatia</option>
<option value="Cuba" >Cuba</option>
<option value="Cyprus" >Cyprus</option>
<option value="Czech Republic" >Czech Republic</option>
<option value="Denmark" >Denmark</option>
<option value="Djibouti" >Djibouti</option>
<option value="Dominica" >Dominica</option>
<option value="Dominican Republic" >Dominican Republic</option>
<option value="East Timor" >East Timor</option>
<option value="Ecuador" >Ecuador</option>
<option value="Egypt" >Egypt</option>
<option value="El Salvador" >El Salvador</option>
<option value="Equatorial Guinea" >Equatorial Guinea</option>
<option value="Eritrea" >Eritrea</option>
<option value="Estonia" >Estonia</option>
<option value="Ethiopia" >Ethiopia</option>
<option value="Fiji" >Fiji</option>
<option value="Finland" >Finland</option>
<option value="France" >France</option>
<option value="Gabon" >Gabon</option>
<option value="Gambia" >Gambia</option>
<option value="Georgia" >Georgia</option>
<option value="Germany" >Germany</option>
<option value="Ghana" >Ghana</option>
<option value="Greece" >Greece</option>
<option value="Grenada" >Grenada</option>
<option value="Guatemala" >Guatemala</option>
<option value="Guinea" >Guinea</option>
<option value="Guinea-Bissau" >Guinea-Bissau</option>
<option value="Guyana" >Guyana</option>
<option value="Haiti" >Haiti</option>
<option value="Honduras" >Honduras</option>
<option value="Hong Kong" >Hong Kong</option>
<option value="Hungary" >Hungary</option>
<option value="Iceland" >Iceland</option>
<option value="India" >India</option>
<option value="Indonesia" >Indonesia</option>
<option value="Iran" >Iran</option>
<option value="Iraq" >Iraq</option>
<option value="Ireland" >Ireland</option>
<option value="Israel" >Israel</option>
<option value="Italy" >Italy</option>
<option value="Jamaica" >Jamaica</option>
<option value="Japan" >Japan</option>
<option value="Jordan" >Jordan</option>
<option value="Kazakhstan" >Kazakhstan</option>
<option value="Kenya" >Kenya</option>
<option value="Kiribati" >Kiribati</option>
<option value="North Korea" >North Korea</option>
<option value="South Korea" >South Korea</option>
<option value="Kuwait" >Kuwait</option>
<option value="Kyrgyzstan" >Kyrgyzstan</option>
<option value="Laos" >Laos</option>
<option value="Latvia" >Latvia</option>
<option value="Lebanon" >Lebanon</option>
<option value="Lesotho" >Lesotho</option>
<option value="Liberia" >Liberia</option>
<option value="Libya" >Libya</option>
<option value="Liechtenstein" >Liechtenstein</option>
<option value="Lithuania" >Lithuania</option>
<option value="Luxembourg" >Luxembourg</option>
<option value="Macedonia" >Macedonia</option>
<option value="Madagascar" >Madagascar</option>
<option value="Malawi" >Malawi</option>
<option value="Malaysia" >Malaysia</option>
<option value="Maldives" >Maldives</option>
<option value="Mali" >Mali</option>
<option value="Malta" >Malta</option>
<option value="Marshall Islands" >Marshall Islands</option>
<option value="Mauritania" >Mauritania</option>
<option value="Mauritius" >Mauritius</option>
<option value="Mexico" >Mexico</option>
<option value="Micronesia" >Micronesia</option>
<option value="Moldova" >Moldova</option>
<option value="Monaco" >Monaco</option>
<option value="Mongolia" >Mongolia</option>
<option value="Montenegro" >Montenegro</option>
<option value="Morocco" >Morocco</option>
<option value="Mozambique" >Mozambique</option>
<option value="Myanmar" >Myanmar</option>
<option value="Namibia" >Namibia</option>
<option value="Nauru" >Nauru</option>
<option value="Nepal" >Nepal</option>
<option value="Netherlands" >Netherlands</option>
<option value="New Zealand" >New Zealand</option>
<option value="Nicaragua" >Nicaragua</option>
<option value="Niger" >Niger</option>
<option value="Nigeria" >Nigeria</option>
<option value="Norway" >Norway</option>
<option value="Oman" >Oman</option>
<option value="Pakistan" >Pakistan</option>
<option value="Palau" >Palau</option>
<option value="Panama" >Panama</option>
<option value="Papua New Guinea" >Papua New Guinea</option>
<option value="Paraguay" >Paraguay</option>
<option value="Peru" >Peru</option>
<option value="Philippines" >Philippines</option>
<option value="Poland" >Poland</option>
<option value="Portugal" >Portugal</option>
<option value="Puerto Rico" >Puerto Rico</option>
<option value="Qatar" >Qatar</option>
<option value="Romania" >Romania</option>
<option value="Russia" >Russia</option>
<option value="Rwanda" >Rwanda</option>
<option value="Saint Kitts and Nevis" >Saint Kitts and Nevis</option>
<option value="Saint Lucia" >Saint Lucia</option>
<option value="Saint Vincent and the Grenadines" >Saint Vincent and the Grenadines</option>
<option value="Samoa" >Samoa</option>
<option value="San Marino" >San Marino</option>
<option value="Sao Tome and Principe" >Sao Tome and Principe</option>
<option value="Saudi Arabia" >Saudi Arabia</option>
<option value="Senegal" >Senegal</option>
<option value="Serbia and Montenegro" >Serbia and Montenegro</option>
<option value="Seychelles" >Seychelles</option>
<option value="Sierra Leone" >Sierra Leone</option>
<option value="Singapore" >Singapore</option>
<option value="Slovakia" >Slovakia</option>
<option value="Slovenia" >Slovenia</option>
<option value="Solomon Islands" >Solomon Islands</option>
<option value="Somalia" >Somalia</option>
<option value="South Africa" >South Africa</option>
<option value="Spain" >Spain</option>
<option value="Sri Lanka" >Sri Lanka</option>
<option value="Sudan" >Sudan</option>
<option value="Suriname" >Suriname</option>
<option value="Swaziland" >Swaziland</option>
<option value="Sweden" >Sweden</option>
<option value="Switzerland" >Switzerland</option>
<option value="Syria" >Syria</option>
<option value="Taiwan" >Taiwan</option>
<option value="Tajikistan" >Tajikistan</option>
<option value="Tanzania" >Tanzania</option>
<option value="Thailand" >Thailand</option>
<option value="Togo" >Togo</option>
<option value="Tonga" >Tonga</option>
<option value="Trinidad and Tobago" >Trinidad and Tobago</option>
<option value="Tunisia" >Tunisia</option>
<option value="Turkey" >Turkey</option>
<option value="Turkmenistan" >Turkmenistan</option>
<option value="Tuvalu" >Tuvalu</option>
<option value="Uganda" >Uganda</option>
<option value="Ukraine" >Ukraine</option>
<option value="United Arab Emirates" >United Arab Emirates</option>
<option value="United Kingdom" >United Kingdom</option>
<option value="United States" >United States</option>
<option value="Uruguay" >Uruguay</option>
<option value="Uzbekistan" >Uzbekistan</option>
<option value="Vanuatu" >Vanuatu</option>
<option value="Vatican City" >Vatican City</option>
<option value="Venezuela" >Venezuela</option>
<option value="Vietnam" >Vietnam</option>
<option value="Yemen" >Yemen</option>
<option value="Zambia" >Zambia</option>
<option value="Zimbabwe" >Zimbabwe</option>
                              </select>
                    <label for="element_2_6">Country</label>
          </div>
                    </li>                    <li id="li_5" >
                    <label class="description" for="element_5">Work Phone </label>
                    <span>
                              <input id="element_5_1" name="element_5_1" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_5_1">(###)</label>
                    </span>
                    <span>
                              <input id="element_5_2" name="element_5_2" class="element text" size="3" maxlength="3" value="" type="text"> -
                              <label for="element_5_2">###</label>
                    </span>
                    <span>
                               <input id="element_5_3" name="element_5_3" class="element text" size="4" maxlength="4" value="" type="text">
                              <label for="element_5_3">####</label>
                    </span>
                    <p class="guidelines" id="guide_5"><small>Please enter the phone number of the establishment where you work if applicable. </small></p>
                    </li>                    <li id="li_22" >
                    <label class="description" for="element_22">Schedule </label>
                    <div>
                              <textarea id="element_22" name="element_22" class="element textarea medium"></textarea>
                    </div><p class="guidelines" id="guide_22"><small>Please feel free to include your schedule. What days you work, when are you days off, be sure to include your hours available (example: 9am-7pm) or if you have any 'by appointment only' days. </small></p>
                    </li>                    <li id="li_7" >
                    <label class="description" for="element_7">Profile Picture </label>
                    <div>
                              <input id="element_7" name="element_7" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_8" >
                    <label class="description" for="element_8">Portfolio image </label>
                    <div>
                              <input id="element_8" name="element_8" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_9" >
                    <label class="description" for="element_9">Portfolio image </label>
                    <div>
                              <input id="element_9" name="element_9" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_10" >
                    <label class="description" for="element_10">Portfolio image </label>
                    <div>
                              <input id="element_10" name="element_10" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_11" >
                    <label class="description" for="element_11">Portfolio image </label>
                    <div>
                              <input id="element_11" name="element_11" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_13" >
                    <label class="description" for="element_13">Portfolio image </label>
                    <div>
                              <input id="element_13" name="element_13" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_14" >
                    <label class="description" for="element_14">Portfolio image </label>
                    <div>
                              <input id="element_14" name="element_14" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_15" >
                    <label class="description" for="element_15">Portfolio image </label>
                    <div>
                              <input id="element_15" name="element_15" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_16" >
                    <label class="description" for="element_16">Portfolio image </label>
                    <div>
                              <input id="element_16" name="element_16" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_17" >
                    <label class="description" for="element_17">Portfolio image </label>
                    <div>
                              <input id="element_17" name="element_17" class="element file" type="file"/>
                    </div>
                    </li>                    <li id="li_18" >
                    <label class="description" for="element_18">Portfolio image </label>
                    <div>
                              <input id="element_18" name="element_18" class="element file" type="file"/>
                    </div>
                    </li>
                        <li class="buttons">
                          <input type="hidden" name="form_id" value="836144" />
                    <input id="saveForm" class="button_text" type="submit" name="submit" value="Submit" />
                        </li>
                      </ul>
                    </form>
                    <div id="footer">
                    </div>
          </div>
          <img id="bottom" src="file:///C|/Users/Tommy/AppData/Local/Temp/Temp1_form.zip/form/bottom.png" alt="">
          </body>
</html>

I'm afraid not.    It's not rocket science but you need to do some coding.
You'll need to find a script (php) and save it to your local site folder. Then reference the script in your form's action attribute like so.
     <form action="path/form-to-email-script.php" >
The input fields in your HTML form need to exactly match the script variables.
I'm assuming you're hosted on a Linux server which uses PHP code. Linux servers are also case sensitive, so upper case names are not the same as lower case names. It's usually best to use all lower case names in your form and script to avoid confusion.
Related Links:
Formm@ailer PHP from DB Masters
http://dbmasters.net/index.php?id=4
Tectite
http://www.tectite.com/formmailpage.php
If this is all a bit beyond your skill set, look at:
Wufoo.com (on-line form service)
http://wufoo.com/
Nancy O.

How to call a web Service from Oracle Applications?

Hi friends,
I've posted this question on OA Framework forum , but may be it's more appropiated put it here. Sorry for do it again:
It's about how to call a web service from a Form or a .sql (via Request) in Oracle Applications:
Could you please explain here the detailed steps (with code example if it's possible) to invoke a webservice from Oracle Applications?.. how did yo do it...?
I've read differents posts here and the 33097.1 metalink note (by the way, the first recommended link in this note is broken...), but there are lots of theorical concepts and no real examples to see how/from where invoke the WS
I'll have to call one webservice (I suppose the customer will give me the interface implementation)...but I've never did it with Applications so that's why I ask you for all the detailed steps...
I work with Forms 6i, Apps 11.5.10.2 and DB 9.2.0.7.
Thanks a lot.
Jose.

Hello Jose,
I did using java program to call BPEL web services in 11.5.10.
I pasted below the metalink note for your reference (Note:250964.1)
The idea is first write a java program to call the webservice (in my case it is calling an BPEL web service, so this may not help directly), test it.
Then port the java program as specified in the note, so that you could call your web service through concurrent manager scheduler.
Is this ok?
Thanks
Arun.
======================================================
Checked for relevance on 25-Apr-2007
Application Install - Version: 11.5.8 to 11.5.10
Goal
====
How to register and create a Java concurrent program for Oracle Applications
Release 11i
Solution
========
1. Create your Java Concurrent Program (JCP) , using a text editor.
/*===========================================================================+
| Concurrent Processing Sample Code |
| |
| FILENAME |
| Hello.java |
| |
| DESCRIPTION |
| Sample Java concurrent program |
| About the simplest possible program, just writes a message to the |
| logfile and output file. |
| |
| HISTORY |
| $Log$ |
| |
+===========================================================================*/
package oracle.apps.fnd.cp.sample;
import oracle.apps.fnd.cp.request.*;
public class Hello implements JavaConcurrentProgram {
public static final String RCS_ID = "$Header$";
public void runProgram(CpContext ctx) {
ctx.getLogFile().writeln("-- Hello World! --", 0);
ctx.getOutFile().writeln("-- Hello World! --");
ctx.getReqCompletion().setCompletion(ReqCompletion.NORMAL, "");
=======================================
End Sample
=======================================
2. Create a sample directory under $JAVA_TOP:
$ mkdir $JAVA_TOPoracle/apps/fnd/cp/sample
3. Copy Hello.java into $JAVA_TOP/oracle/apps/fnd/cp/sample:
$ cp $HOME/Hello.java $JAVA_TOP/oracle/apps/fnd/cp/sample
4. Compile your java program:
javac $JAVA_TOP/oracle/apps/fnd/cp/sample/Hello.java
5. Test at the command line with following syntax:
jre -Ddbcfile=$FND_TOP/secure/your_dbc_file.dbc \
-Drequest.outfile=./outfile \
oracle.apps.fnd.cp.request.Run \
oracle.apps.fnd.cp.sample.Hello
6. Register your custom java concurrent program with Oracle Applications.
a. Navigate: Concurrent > Program > Executable
b. Enter details into the form
Executable: JCPHELLO
Shortname: JCPHELLO
Application: Application Object Library
Execution Method: Java Concurrent Program
Execution File Name: Hello (Insert a name that does not contain space or period)
Execution File Path: oracle.apps.fnd.cp.sample
c. Save the details
d. Navigate: Concurrent > Program > Define
e. Enter details into the form
Program Name: JCPHELLO
Program Shortname: JCPHELLO
Application: Application Object Library
Executable: Choose JCPHELLO from LOV
Executable Options :
f. Save the details
7. Add this new concurrent request to your responsibility request group.
a. Navigate > Security > Responsiblity > Request
b. Query System Administrator
c. Add new row and choose TestJava
d. Save the changes.
8. Run your new Hello Java Concurrent Program
Navigate: Request > Run
References
~~~~~~~~~~~
Oracle Applications Developers Manual for Release 11i A75545-01
====================================================

How to Call the RFC in Webdynpro abap application

Dear Experts,
Good Evening to all...
I have to add two numbers using RFC in webdynpro abap application. If we give the numbers in the input screen then the RFC should add it and give it in the output screen. This is the application for that I have created the RFC.
But the problem is i don't know how to call the RFC in that Webdynpro abap application and how to link the input view and output view with that RFC...? I am new to Webdynpro abap. Please kindly help me on this... I am struggled here... I need your help in this....
Thank You.

Hi Jaga,
You asked the same question again.
Without closing the [previous one|Re: Where SAP store the uploaded files?].
I think Abhi has answered your question.
If not please elaborate on the problem.
The solution btw is to create a Service Call.
Sumit

How to call the RFC from R/3 to SRM, when we use webdynpro abap? (Urgent)

Hello
We use SRM Server 5.5 with classic scenario.
We want to call RFC in R/3 from webdynpro ABAP.
How can we do that?
We are developing the web report using webdynpro abap.
So we need some of R/3 data such like PR(EBAN)and PO(EKKO,EKPO).
When user choose the search parameter, report diplay the Shopping cart, PR and PO data on webdynpro. So we call the R/3 RFC to display the PR, PO data.
But I tired to call the RFC in R/3, We could not call it.
How to call the RFC from R/3 to SRM, when we use webdynpro abap?
Thank you,
Best Regards,
SH.

Hi
<b>Please look at the following threads as well -></b>
WebDynpro in SRM
BAPI's /RFC's in SRM
BAPI to Change Shopping Cart by RFC
SRM60 and webdynpro
Webdynpro Services Exception
WebDynpro using BAPI has an error
SRM60 and webdynpro...
<b>SAP uses META Function modules in SRM to get data from R/3 back-end.</b>
<u>For getting Purchase requistion data, use the function modules -></u>
META_REQUISITION_CHANGE        Change purchase requisition
META_REQUISITION_CREATE        Create Requisition
META_REQUISITION_DELETE        Delete/close purchase requisition
META_REQUISITION_GETDETAIL     Display requisition details
META_REQUISITION_GETITEMS      Display requisition items
META_REQUISITION_GETRELINFO    Get Releasease Info for requisitions
<u>For getting Purchase order data, use the function modules -></u>
META_PO_CREATE                 Create purchase order
META_PO_DELETE                 Delete reservation
META_PO_GETDETAIL              Display purchase order details
META_PO_GETITEMS               Display purchase order items
META_PO_GETRELINFO             Display purchase order release information
Hope this will definitely help. Do let me know.
Regards
- Atul

How to call the webservice using ADF Bindings

Hi,
I have created a Data control of the webservice using the WSDL Url. (Web Service is secured and so i have given the security configurations)
Webservice works fine when i drag and drop that in to a jspx page.
Now i want to call the service from a java class so that i can modify the data a bit. ( Tried with Webservice client and proxy and it is not working)
Please provide me with some link or solution as how to achieve this.
Thanks,
Hari

You need to have the method binding in the page that calls the Web service - otherwise you can't use the binding layer.
If you don't want to use the binding layer you can have your managed bean just call out to the Web service directly - you can use JDeveloper's Web service proxy creation wizard to get the code for this.
If you want to call the Web service through binding outside of the page you can also drag the method into a taskflow as a method call.

How to call the Report program into Function module

Hi Experts,
Actually I want to create the DataSource. But I have only the ALV report program. I need to create function module but I dont know how to call the ALV report program using in function module
So could you please any one send the Document or step by step method?
Advance Thanks,
Sathis

If the report is just based out of a table than create a Generic Extractor using View.
If its an InfoSet query than create a Generic Extractor on that InfoSet.
If its an ABAP report than create a Generic Extractor using FM
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a0f46157-e1c4-2910-27aa-e3f4a9c8df33

How to writea   report which can send a mail to the user who is running

Hello,
how to write the program to send a mail

have to get all the data in an text internal table and use the following fm in your pgm
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data              = w_doc_data
      put_in_outbox              = c_true
      sender_address             = ld_sender_address
      sender_address_type        = ld_sender_address_type
      commit_work                = c_true
    IMPORTING
      sent_to_all                = w_sent_all
    TABLES
      packing_list               = gt_packing_list
      contents_bin               = gt_attachment
      contents_txt               = gt_message
      receivers                  = gt_receivers
    EXCEPTIONS
      too_many_receivers         = 1
      document_not_sent          = 2
      document_type_not_exist    = 3
      operation_no_authorization = 4
      parameter_error            = 5
      x_error                    = 6
      enqueue_error              = 7
      OTHERS                     = 8.
* Populate zerror return code
ld_error = sy-subrc.
MESSAGE i000(zp) WITH 'Message succesfully sent'.

How to write the code to send the report output to the local file.

dear all,
how to write the code to send the report output to the local file.
Thanks & Regards,
Jyothi.

Hi,
Try this , it will display report and download the file as well. Just vhange the path and execute
TYPE-POOLS : SLIS.
DATA : IT_SCARR TYPE TABLE OF SCARR,
       IT_FCAT TYPE SLIS_T_FIELDCAT_ALV.
SELECT *
FROM SCARR
INTO TABLE IT_SCARR.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
*   I_PROGRAM_NAME               =
*   I_INTERNAL_TABNAME           =
    I_STRUCTURE_NAME             = 'SCARR'
*   I_CLIENT_NEVER_DISPLAY       = 'X'
*   I_INCLNAME                   =
*   I_BYPASSING_BUFFER           =
*   I_BUFFER_ACTIVE              =
CHANGING
    CT_FIELDCAT                  = IT_FCAT
* EXCEPTIONS
*   INCONSISTENT_INTERFACE       = 1
*   PROGRAM_ERROR                = 2
*   OTHERS                       = 3
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
*   I_INTERFACE_CHECK              = ' '
*   I_BYPASSING_BUFFER             =
*   I_BUFFER_ACTIVE                = ' '
*   I_CALLBACK_PROGRAM             = ' '
*   I_CALLBACK_PF_STATUS_SET       = ' '
*   I_CALLBACK_USER_COMMAND        = ' '
*   I_STRUCTURE_NAME               =
*   IS_LAYOUT                      =
   IT_FIELDCAT                    = IT_FCAT
*   IT_EXCLUDING                   =
*   IT_SPECIAL_GROUPS              =
*   IT_SORT                        =
*   IT_FILTER                      =
*   IS_SEL_HIDE                    =
*   I_DEFAULT                      = 'X'
*   I_SAVE                         = ' '
*   IS_VARIANT                     =
*   IT_EVENTS                      =
*   IT_EVENT_EXIT                  =
*   IS_PRINT                       =
*   IS_REPREP_ID                   =
*   I_SCREEN_START_COLUMN          = 0
*   I_SCREEN_START_LINE            = 0
*   I_SCREEN_END_COLUMN            = 0
*   I_SCREEN_END_LINE              = 0
*   IR_SALV_LIST_ADAPTER           =
*   IT_EXCEPT_QINFO                =
*   I_SUPPRESS_EMPTY_DATA          = ABAP_FALSE
* IMPORTING
*   E_EXIT_CAUSED_BY_CALLER        =
*   ES_EXIT_CAUSED_BY_USER         =
TABLES
    T_OUTTAB                       = IT_SCARR
* EXCEPTIONS
*   PROGRAM_ERROR                  = 1
*   OTHERS                         = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>GUI_DOWNLOAD
EXPORTING
*    BIN_FILESIZE              =
    FILENAME                  = 'C:\Documents and Settings\sap\Desktop\Hi.xls' " Change path
*    FILETYPE                  = 'ASC'
*    APPEND                    = SPACE
*    WRITE_FIELD_SEPARATOR     = SPACE
*    HEADER                    = '00'
*    TRUNC_TRAILING_BLANKS     = SPACE
*    WRITE_LF                  = 'X'
*    COL_SELECT                = SPACE
*    COL_SELECT_MASK           = SPACE
*    DAT_MODE                  = SPACE
*    CONFIRM_OVERWRITE         = SPACE
*    NO_AUTH_CHECK             = SPACE
*    CODEPAGE                  = SPACE
*    IGNORE_CERR               = ABAP_TRUE
*    REPLACEMENT               = '#'
*    WRITE_BOM                 = SPACE
*    TRUNC_TRAILING_BLANKS_EOL = 'X'
* IMPORTING
*    FILELENGTH                =
CHANGING
    DATA_TAB                  = IT_SCARR
* EXCEPTIONS
*    FILE_WRITE_ERROR          = 1
*    NO_BATCH                  = 2
*    GUI_REFUSE_FILETRANSFER   = 3
*    INVALID_TYPE              = 4
*    NO_AUTHORITY              = 5
*    UNKNOWN_ERROR             = 6
*    HEADER_NOT_ALLOWED        = 7
*    SEPARATOR_NOT_ALLOWED     = 8
*    FILESIZE_NOT_ALLOWED      = 9
*    HEADER_TOO_LONG           = 10
*    DP_ERROR_CREATE           = 11
*    DP_ERROR_SEND             = 12
*    DP_ERROR_WRITE            = 13
*    UNKNOWN_DP_ERROR          = 14
*    ACCESS_DENIED             = 15
*    DP_OUT_OF_MEMORY          = 16
*    DISK_FULL                 = 17
*    DP_TIMEOUT                = 18
*    FILE_NOT_FOUND            = 19
*    DATAPROVIDER_EXCEPTION    = 20
*    CONTROL_FLUSH_ERROR       = 21
*    NOT_SUPPORTED_BY_GUI      = 22
*    ERROR_NO_GUI              = 23
*    others                    = 24
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>EXECUTE
EXPORTING
    DOCUMENT               = 'C:\Documents and Settings\sap\Desktop\Hi.xls' "Change path
*    APPLICATION            =
*    PARAMETER              =
*    DEFAULT_DIRECTORY      =
*    MAXIMIZED              =
*    MINIMIZED              =
*    SYNCHRONOUS            =
*    OPERATION              = 'OPEN'
* EXCEPTIONS
*    CNTL_ERROR             = 1
*    ERROR_NO_GUI           = 2
*    BAD_PARAMETER          = 3
*    FILE_NOT_FOUND         = 4
*    PATH_NOT_FOUND         = 5
*    FILE_EXTENSION_UNKNOWN = 6
*    ERROR_EXECUTE_FAILED   = 7
*    SYNCHRONOUS_FAILED     = 8
*    NOT_SUPPORTED_BY_GUI   = 9
*    others                 = 10
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

How to call the secured EJB from timer ejb timedout method.

Hi All,
I have a couple of questions on EJB 3.1 Timer Service.
1. How to call the secured EJB (annotated @RolesAllowed) from Timer EJB @Timeout Method?
2. What's the default role/principal with which the Timer @Timeout Method gets called?
Please let me know any info regarding the same.
Thanks,
Suresh

I'd start here:
http://ant.apache.org/manual/index.html
If that doesn't help, go to the table of contents and start poking around. You don't need to read the whole thing front to back, but if you're not willing to spend some time researching and reading, you're not going to get very far.

How to call the collaboration service send e-mail

Similar Messages

Maybe you are looking for