How to cancel a remote request at the POA?

Hi,
today we had the problem that a user running the gwclient in remote mode
had requested the download of an email attachment. This attachment was
very large and because of the bad internet connection at his location,
transfer was aborted several times. Because of that the user cancelled
the remote request on his side (= gwclient).
Problem was, that this request has been transmitted to our POA and any
time the user connected again via remote mode, the attachment transfer
started from scratch; making it impossible to sync the other (newer)
mails.
In the past I was able to delete remote requests at the POA, by deleting
the user's directory below "../ofwork/ofdirect/". This time the user did
not have such a directory, therefore nothing I could delete.
Is there any other way to get rid of remote requests??
Thanks in advance,
Frank

Maybe TID10080811 has the answer.
>>> Frank Langner<[email protected]> 2/10/2012 9:40 AM >>>
Hi,
today we had the problem that a user running the gwclient in remote mode
had requested the download of an email attachment. This attachment was
very large and because of the bad internet connection at his location,
transfer was aborted several times. Because of that the user cancelled
the remote request on his side (= gwclient).
Problem was, that this request has been transmitted to our POA and any
time the user connected again via remote mode, the attachment transfer
started from scratch; making it impossible to sync the other (newer)
mails.
In the past I was able to delete remote requests at the POA, by deleting
the user's directory below "../ofwork/ofdirect/". This time the user did
not have such a directory, therefore nothing I could delete.
Is there any other way to get rid of remote requests??
Thanks in advance,
Frank

Similar Messages

  • How to cancel an erase request made through find my I phone

    I lost an I phone and through " find my I phone " I found it was offline so I made a request to erase the phone when connected to internet.
    Next day I found it, how to cancel that erase request? I am afraid if I opened it it will connect to internet and be erased
    Anybody can help ?

    unlick wrote:
    same case happened to me but i got it backed up a day b4. now the problem is.... it is taking forever to erase the phone.
    the spinning bars is at the center of the screen for hours now and it is still spinning. any clue?
    It's probably waiting for the phone to come back on line so it can communicate with it.

  • How to delete unreleased transport request where the objects are locked

    Hi Experts,
      I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

    Hi,
    First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
    Than go to se10 and delete what you want.
    I hope it helps.
    Bulent

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • How to cancel a service request?

    I had been running the Ipod in the car and noticed it had gone into the red. I turned it off and it went off normally. When I got home I hooked it to the computer to charge and it froze up completely, no response to anything, hold button, click wheel, weirdest yet, the backlight stayed on permanantly. And the computer did not recognize that it was even connected in Itunes or as a drive.
    So I freaked out a bit and after an hour or so while( after trying what I could which was basically holding controls down and flipping the hold button off and on ) I gave up and put in a service request, and went to bed.
    The next day, I noticed that the Ipod was dark ( which I expected since the battery was almost gone and the backlite was stuck on ). But just for fun I press the clickwheel on and lo and behold, it came back on as normal. I hooked it up to the computer as usual and it was visible to Itunes and the computer as it should have before. So I went through the reset process just in case and relaoded my music.
    So I guess there should be a 6th "R" Let it sit over night and see if it still screwed up the next day
    Now I'm stuck trying to figure out how to cancel a service after already receiving the return box Which was very fast by the way. Like, 2 days. Anyway, I looked all over the support site and could not find anything that looked like what I needed.
    Does anyone have any idea what I need to do to cancel the service request?
    Mike
    Dell Dimension 8400   Windows XP Pro  
    Dell Dimension 8400   Windows XP Pro  

    Call apple...
    Apple Phone Numbers
    btabz

  • How to delete a noncompress request from the aggregates

    hello gurus
              i have a request in an infocube, which is not compressed in the cube. i rolled up the request, so that the data will  be moved to the aggregate. is it? then i found that the data is inconsistant. so i delete the request from the infocube manage scree, under the request tab. now my question is whether the data will be deleted from the aggregate or not?
    thanks in advance
    rams.

    If the Request has not been compressed in teh cube or the aggregate, you should simply be able to delete the Request form the Cube and it will be automatically deleted form teh Aggregate.  Since it has NOT been compressed in the aggregate, it should be a very quick process - no need to deactivate the aggregate.
    If it has been compressed in the aggregate, but not the InfoCube, you should still be able to delete the Request form the InfoCube, but the BW will have to refill the aggregate.  It should do this on it's own, but at differnt sopport packs, I had some problems with that always working.  As others have mentioned, in this case you could always deactivate the aggregate, the delete the Request from the InfoCube.
    As yo ureview this situation, you should consider how often you have/might have a problem like this.  If it occurs very often, then you should have your aggregate(s) for this cube setup so they do NOT automatically compress after Rollup.  Instead the Requests in the aggrgate will only be compressed when the Request in the InfoCube is compressed.

  • High PPI Support Multiple Monitors: How it comes that Remote Desktop implements the hight PPI support very well and win 8.1 doesnt?

    http://skovalev.de/wp-content/uploads/2014/05/RemoteDesktop-HighPPI-Perfect.png
    Hello all: i am using an High PPI Monitors from Dell XPS15 (3600x1800) and a Normal FullHD above it. The FullHD monitor is an external device and is set up as the primary device. Scaling is set to per Monitor DPI.
    Now the Question: how it comes, that my RemoteDesktop on the secondary (internal) screen has almost perfect implementation for this????
    BUT i am am talking only about the RemoteDekstopManager, normal one does not works with high ppi in this way... Also ModernUI has no problems with scaling
    http://skovalev.de/wp-content/uploads/2014/05/Firfox-and-Resolution-RemoteDesktop.png
    NOTE that the resolution on the remote desktop is set to 1600x900 and there are NO scaling problems even on the 3200x1800 monitor!
    On both picutures you find the dell monitor on the bottom and the scaled original windows explorer/firefox on the bottom right. See how blurry it is? I really breaks my eyes :(
    I hope Microsoft can finally fix the high PPI Monitors issue, since the solutions seems to be already implemented

    No, i mean the Scaling Support.
    If you use multiple monitor, in windows 8.1 you can scale per monitor. If you use this option with a High PPI monitor, like ultra HD or 4K, the image on the monitors with other PPI than the main monitors appears fuzzy and blury.
    But there are also scaling problems even if you use only single monitor. This article blog describes it pretty good:
    http://www.hanselman.com/blog/LivingAHighDPIDesktopLifestyleCanBePainful.aspx
    By the way there are lot article like this describing the scaling problems, not only by users but also by professinals and IT magazines...
    BUT here it comes: watch @ my screenshots. If the remote desktops resolution is 1800x900 and the native resolution is 3600x1800, there are no scaling problems! HOW? So like you can see on my screenshots a native application on my monitor appears fuzzy while
    the same application runnin of the remote desktop has clear type!
    That means for me, that windows HAS the possibility to scale clearly, but somehow this feature is only supported by RDCM...

  • How to cancel a print job on the hp officejet 8600 pro running xp

    How do cancel a print or copy job on the Officejet 8600 Pro Premium?  There is no "cancel" button on the control panel.  Do I have to go through the software?  Time consuming -
       Thanks!
    This question was solved.
    View Solution.

    scarlattid3,
    The cancel button should be located in the bottom right corner of the screen. The only thing is it's not going to show up until you start the print job or copy and then it should appear for you.
    Let us know if you are able to find this.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • TS4006 how to cancel a remote wipe request

    How can I cancel my request to remote wipe my ipad2? I found it and do not want it erased.

    No, you cannot cancel the request.
    However, you can perform the backup on the computer through itunes(make sure you are not connected to internet). Once the backup is done, you can turn on the internet on the phone & let the wipe complete.
    Then you can restore the data back from iTunes.
    I hope this will help.

  • How to pass 2 different REQUEST in the URL

    Hi,
    I want to pass 2 different REQUEST value when I click the Edit link of the Report (Report/Form).
    I have give VALUE1 in the Request property of edit link, I want to give 2 REQUEST value something like
    VALUE1, VALUE2...
    http://xxxxxx/pls/apex/f?p=1111:1:10000000:VALUE1:NO:::
    (here I want to pass VALUE1 & VALUE2 both as Request)
    Help appreciated.
    thanks,
    deepak

    You can only have one REQUEST at a time.
    Not sure why you would want to have multiple requests-- possibly to trigger multiple process blocks? If so, you can set up a process to run against multiple request values, by using the condition type of "value of expressoin 1 is contained in colon-delimited list in expression 2", setting express 1 to "REQUEST" and setting expression 2 to "VALUE1:VALUE2".
    If that won't solve your issue, please give us more detail on why you would want to use multiple values for a request, and we may be able to suggest an alternate approach.

  • I cannot open Adobe Acrobat Pro.  There is a pink "X" on the Uninstaller.  I don't know how to cancel UNINSTALL, if that is the problem.

    I am using a MacBook Pro OS X 10.9.5  

    For general browsing on an older powerPC Mac, you'd need to get a supported browser, one that sees current or recent updates for security reasons; so that is one thing. You could get and install anything from the internet.
    But you probably do not have a virus.
    tech guides
    http://www.thesafemac.com/tech-guides/
    adware removal guide
    http://www.thesafemac.com/arg/
    A good browser for a powerPC computer running up to 10.5.8, is TenFourFox. Or iCab. Or SeaMonkeyPPC. With some of these you can set up an email account, & those may be more secure than older Mac Mail. You can also be sure the settings in a browser or email client application do not automatically open attachments or downloads, until you determine what they are through investigation.
    If you got an idea to download free applications from untrustworthy sites, or wanted to clean up your mac, etc using some dubious software, then an 'adware' may be installed. Some kinds of items you may seek to download or that were attachments on an email, can be dealt with in several ways. Safe browsing, near paranoid use of email, and if you use a web-based email, use a secure browser to visit it, login online, and do not have unnecessary cookies or features set in the browser.
    What OS X version does your PowerBook have running?
    What are you using for a web browser? Safari is unsupported.
    Good luck & happy computing!

  • HT1338 how to cancel my snow leopard from the PC

    I

    Call a local PC or Mac tech and have them assist you.
    We can only assist those who can help themselves.
    Good Luck

  • PLEASE HELP! PLEASSSEE!How to cancel REMOTE WIPE request!

    Hello Apple,
    Today I lost my Apple iPhone 4s and I had iCloud installed on it..without any thinking I just chosed to REMOTE WIPE rather than REMOTE LOCK.
    I wasn't aware that REMOTE WIPE will actually disable the ability for me to track my device. It's all still in pending and I really want to cancel the REMOTE WIPE request. PLEASE MAKE IT! PLEASE!!! I feel so terrible loosing my new iPhone 4s! I will be soo happy to get it back!
    I live in Saudi Arabia.
    Thank you!
    Yours Truthfully,
    Mohammed.

    Unfortunately you cannot cancel a remote wipe once the instruction has been given.

  • How does one set up remote access via the internet to access files stored on the Time Capsule using airport utility 6.1

    I was just wondering if anyone can provide me with instructions please on how to set up remote access via the internet to the time capsule when away from home?
    I am running OS X Mountain Lion operating system and have Airport Utility 6.1.
    Many thanks to you all for your help.

    I think the instructions should be all in BTMM with iCloud.
    Instructions are all there.
    http://support.apple.com/kb/ht3486

  • How can I send request to the server through XML using JSP

    How can I send XML request to the server using JSP and servlets

    Ajax may be the one way.

Maybe you are looking for