How to delete unreleased transport request where the objects are locked

Hi Experts,
  I was created a transport request, but I am facing some probelms with taht request, now I want to delete transport request. I tried to delete them in SE10, I am getting message that the objects are locked. Please tell me how to delete unreleased transport requests where the objects belong to this transport request are locked.

Hi,
First go to transaction se03 Choose "Unlock Objects (Expert Tool)" option under "Requests/Tasks" and unlock your task,
Than go to se10 and delete what you want.
I hope it helps.
Bulent

Similar Messages

  • How to delete 100+ released requests from the import queue?

    Hello
    How to delete 100+ released requests from the import queue?
    One by one or there is more convinient way?
    Thanks

    To delete multiple non-imported transport requests, you do the following while in the import queue on STMS:
    1) Highlight the status field of the import queue.
    2) Sort the import queue by the status.
    3) Put your cursor on the first non-imported transport, right-click, and click on Select Block.
    4) Scroll down and put your cursor on the last non-imported transport, right-click and click on Select Block. This will highlight all requests from the first one selection to the last one selected.
    5) Go to menu option Request > Delete.
    If all of the requests in the import queue haven't been imported (no imported, including failed import, requests), you can jump to Steps 3-5.

  • FM or BAPI to delete a transport request or any object of a transport

    Hi Experts,
    Is there any FM or BAPI to delete a transport request or any object of a transport request.
    Thanks
    Yogesh Gupta

    Hello Yogesh,
    See if this helps:
    If you want to delete a transport from a system queue try FM TMS_UI_MAINTAIN_TR_QUEUE. Just mantain parameters IV_SYSTEM, IV_REQUEST and IV_DEL_REQUEST.
    If you want to delete a request, try using FM TRINT_TDR_USER_COMMAND. Just maintain parameters like this:
    IV_OBJECT = YOUR REQUEST ID
    IV_TYPE = 'TASK'
    IV_COMMAND = 'DELE'
    If you want to delete an object, just put a breakpoint in this FM to see it's logic.
    Kind regards,
    Bruno
    Edited by: Bruno Garcia on Aug 19, 2008 10:31 AM

  • How to delete a transport request easily?

    Hi Gurus,
    I need to delete a transport request. Unfortunately, I received an error that says
    "Request/task BWDK903562 cannot be deleted because it contains locked objects".
    So, in order to delete that transport request, I have to first delete all objects contained in that request. However, there are just too many of them if I were to do it manually one-by-one.
    Is there any approach where I could delete this transport request easily without first deleting all objects contained in that request?
    Thanks you in advance.

    Hi Fulham,
    A transport request cannot be deleted with locked objects. So you have to first unlock the objects in the request. To do this: SE03 --> Request Task --> Unlock Objects.
    The in SE10 select the request you want to delete and expand. Then right click on the sub node of the request and delete. Then Select the main request and delete.
    Hope this helps.
    Bhargava

  • How to delete a transport request once it is been realised.

    Hi Gurus,
            I need to delete the object from the existing transport request which is already been released and create a new transport request to transport. Is this options possible.
    With Regards,
    Shakthi.

    - You cannot delete a released transport request, but you (or Basis team) can remove it from the import queue in the following systems (starting with quality) (STMS)
    - Then you could also via transport tools add the objects of the released request in a new request, there remove the (no longer wanted) object of the new request and release/transport this new request.. (SE03 - Look for "Merge Object Lists")
    Ref : [Working with the Transport Organizer|http://help.sap.com/saphelp_nw04/helpdata/EN/57/38e14e4eb711d182bf0000e829fbfe/frameset.htm]
    Regards,
    Raymond

  • How to delete released transport request

    Gurus,
    We are doing a system synchronization and for that we are going to make a  system copy from BWP TO BWD. Hence I am told to delete all modifiable transport requests, which I did without any problem.
    But in BWQ there are some transports which are already released  and how I can delete them. They don't show under modifiable transports , rather they show under released transports.
    (For your information in my company any transport released from BWQ does not automatically go to production, we have to send a manual e mail request with the transport # to basis. Therefore  these transports even though they show released they will never make it to production as I have never sent release request to basis and these transport are of no use any ways.
    So please guide me how to delete these released transports in BWQ.
    Thanks
    MK

    Hi MK,
        Goto Import queue of target system(T Code: STMS) and delete(Shift+F2) from import queue. or from menu --> Request --> Delete.
    In this way it only deletes from import queue.
    Hope it Helps
    Srini

  • How to delete a noncompress request from the aggregates

    hello gurus
              i have a request in an infocube, which is not compressed in the cube. i rolled up the request, so that the data will  be moved to the aggregate. is it? then i found that the data is inconsistant. so i delete the request from the infocube manage scree, under the request tab. now my question is whether the data will be deleted from the aggregate or not?
    thanks in advance
    rams.

    If the Request has not been compressed in teh cube or the aggregate, you should simply be able to delete the Request form the Cube and it will be automatically deleted form teh Aggregate.  Since it has NOT been compressed in the aggregate, it should be a very quick process - no need to deactivate the aggregate.
    If it has been compressed in the aggregate, but not the InfoCube, you should still be able to delete the Request form the InfoCube, but the BW will have to refill the aggregate.  It should do this on it's own, but at differnt sopport packs, I had some problems with that always working.  As others have mentioned, in this case you could always deactivate the aggregate, the delete the Request from the InfoCube.
    As yo ureview this situation, you should consider how often you have/might have a problem like this.  If it occurs very often, then you should have your aggregate(s) for this cube setup so they do NOT automatically compress after Rollup.  Instead the Requests in the aggrgate will only be compressed when the Request in the InfoCube is compressed.

  • How to find multiple transport requests for one object

    Hi all,
    Is there any function module which will fetches multiple transport requests ( if created ) for one object.I tried almost all the function modules , but i didn't got the solution.
    I need to develop a report ,   which will takes a single Task number as input and gets the Request number from table E070.
    Based on that Request Number i will fetch remaining Task numbers under it.
    Then for all the Tasks Numbers, i am fetching their  objects by using table E071.
    I need to list out  whether any of these objects are in multiple Transport Requests. Once i got all the Transport Request numbers i need to release the Request based on their Transport Request sequence.
    I tried the following FM's , but not able to get the solution.
    SVRS_DISPLAY_VERSION_LIST
    SVRS_GET_VERSION_DIRECTORY_46
    SVRS_GATHER_REQUEST_FRAGS
    Thanks..

    Hello
    I have tried with below code
    DATA list_tab TYPE TABLE OF abaplist.
    SUBMIT RSWBO040 USING SELECTION-SET 'TEST'
                    EXPORTING LIST TO MEMORY
                   AND RETURN.
    CALL FUNCTION 'LIST_FROM_MEMORY'
       TABLES
         listobject = list_tab
       EXCEPTIONS
         not_found  = 1
         OTHERS           = 2.
    IF sy-subrc = 0.
       CALL FUNCTION 'WRITE_LIST'
         TABLES
           listobject = list_tab.
    ENDIF.
    break-point.
    Submitting the program(RSWBO040) of SE03 transaction a will result in 'CNTL_ERROR' dump.
    Please try some other options
    Thanks

  • How can i delete a transport request?

    Hello:
    I only speak a little english. I wait that you can understand me.
    I have a transport request that is released. I make bad this request and i need delete it. But, when i go to se10 and I try to delete I recive this messagge:
    Request/task ____ already releaded (not modificable).
    How can I delete this request?
    Thank you very much.
    Report RDDIT076 is internal and should not be executed by customers.
    - Reported by Jason ORiordan
    Message was edited by: Suhas Saha

    Hi,
    It is easilly possible to delete the cofile and the datafile of the released transport request but why would you need to do that ?
    It is also possible to delete a transport request in the transport tables but it is a very bad idea and could even be seen as a temptative to hide a forbidden action in the system.
    It will be seen by a security audit as this would create a hole in the request order numbering.
    You would need to use direct database access to delete a released transport request.
    As I told you before, I would NOT do it as it is hasardous et may generate security audit problems.
    You can also destroy your transport system.
    Transport requests are stored in table E070.
    We only modify the e070 table after system copy by database refresh to reset the next transport request number. It is done by inserting a line in the table. We never delete inside this table.
    Use at your own risk !
    Regards,
    Raj.

  • How to find Particular Transport Request.

    Hi All Experts,
    Can anybody please tell, how to find previous transport request for the scenario like mentioned below.
    If I have created some objects and transported to quality system from dev system.
    Now, i need to do some changes in those objects and retransport those changes, with original object.
    So in the request for changes to existing objects if I need to include the request from which the object was transported before, how can i find that old request.
    Your help will be surely rewarded.
    Regards
    Vinay

    Hi,
    in SE01 you can display your requests.
    Alternatively you can use SE03 / Search for Objects in Requests/Tasks, enter your user ID in the Owner, select relevant status, mark the first empty checkbox in the selection of objects, enter the object type (e.g. IOBJ for infoobjects, CUBE for ICube...) and enter its name in the input box; execute
    this will show all your requests packed with the selected objects...
    hope this helps...
    Olivier.

  • How to create second transport request for same programe

    Hello ,
    I created workbench transport request. The changes are done and still in development system.
    Now I have to do another change on the same program that has to be in different transport request,
    but whenever I  change something, and activate it, the changes are saved in first transport. How I can
    create another transport request for the same program without releasing the first one.
    Thanks

    Ask your basis team to provide you with a "Transport of Copies" request.
    Once you get it, add your object in this request and transport. your object will be transported and the original request will not be released. Do note that the changes will still be saved in the original request but you can still transport your object without releasing the original request.
    Edited by: Priyank Jain on Aug 12, 2010 4:12 AM

  • How to find out the transport request that a report is locked to?

    Hello Experts,
    I have to transport a report to production system.
    The report has already been assigned to a transport request.
    How do I find as to which transport request is the particular report assigned to.
    Any place where I can check for the locks on a report ?
    Any advice is very much helpful...

    Hello Venkat,
    Thanks for the prompt reply.
    Actually i had tried it. but unfortunately, NO request number is shown. The Only nessage i'm getting is
    " Source systems can not be transported."
    The report is opening in RRMX in change mode.
    This implies 2 things,
    1. The report is already assigned to a transport request. OR
    2. Its assigned to $temp.
    But if the report is stored as $temp, while tranporting in transport connection, it should ask for a transport request and also ask for the development class. Which is not happening
    Any other places to look for ?????

  • Transport request for the deleted dso

    Hi,
    i had deleted the dso in development and not captured the transport request. now how can i generate the transport request for the deleted dso to move for production.
    Regards
    Ram
    Edited by: ramsapconsultant on Mar 9, 2011 7:40 AM

    Hi Ram,
    you can try creating DSO with same name in Dev system. Capture it in transport req.
    Now delete that DSO and capture it in deletion Transport Request.
    I am not 100% sure if this will work but you can give it a try.
    Regards,
    Hardik

  • The correct way to delete old transport request record ?

    Dear all,
    We want to delete old transport request record before 2008 (two years before) of our system.
    We learn that we should delete the records in the below two path:
    /usr/sap/trans/data
    /usr/sap/trans/cofiles
    Our target is that we will not see the old record after deleting in our PRD system.
    Normally, we see the transport request record in system by this way:
    STMS -->  import overview --> PRD --> Import Queue   system PRD --> Import history
    Our question is do we need to restart our system after delete the record to refresh the Import history?
    We have not delete the record now.
    Any experienced or expert, please kindly give advice.
    Regards,
    Allen

    Hello Allen,
    there are some notes and documentations for this process. Deleting the files from /cofiles and /data will not erase the request from the import history, as you already know.
    You should follow note #41732 to have the requests/data completely deleted from your system. There is a lot of complementary reading in notes #7224, #556734, #189841, etc.
    Note that you can remove the request from the import queue, import history, data and cofiles subdirectory, but still have it on the <SID> buffer (located in  /usr/sap/trans/buffer/<SID>). If this happens to you, please save a copy of the buffer file <SID>, then create a new, blank file named <SID> at a time when the import queue is empty (VERY IMPORTANT). Or, alternatively, please excute the tp cleanbuffer FIL command (which will erase the requests that are not found in /data and /cofiles directories).
    --> Please test this first on a test system, not directly on a productive environment.
    This should be enough to delete old transport requests on your system.
    Best regards,
    Tomas Black

  • Can give me the details how to release the transport request to the qa

    can give me the details how to release the transport request to the quality server pr production server
    thanks

    Hi,
    Use transaction SE09. Here select "modifiable" .Then click -Display.
    Now you get a list of all requests which can be released.
    Locate your request number and drill down. Release the sub-request first and then the main request by selecting and using the "transport" icon.
    Muraleedharan.R
    091 9880028904

Maybe you are looking for

  • A Simple Thread issue ....Please help

    I want to clean up something after completion of all threads. But my System.out.println("After completion of all the threads ...cleanup logic should goes here....");                is executing at first or in middle. please help me to fix this proble

  • Where can I set the default to be always "choose paper source by PDF page size".

    every time I print a pdf document, it doesn't print in the correct page size unless I manually select this option.  Can I set this to always be marked so all my pdf print on correct paper size?

  • Account numbers with unassigned Chart of accounts

    Hi.. Records for the cube are coming from R/3 via a program into a table. BW loads the data from the table. In the table there are some records for an account number 40200 which is assigned to Chart of Accounts and some records for the same account n

  • Several ship-to parties within one sales order

    Dear All, The problem is that I created SOs, so ship-to and sold-to parties are defined at header level. Later I received information that we have to ship out the goods to several addresses. How can I set several ship-to parties for certain items? Th

  • Alt Key mysteriously changed function

    This morning when I turned on my BB Curve (t-mobile, if it matters), there was a message displayed too quickly for me to read, and then the screen was dark for several minutes and the red LED blinked.  This was before I logged on with my password.  I