How to cancel an engineer appointment?
How do I cancel an engineer appointment, as the problem I had has now been rectified? I have been calling the Sky number all evening and trying to get somebody on live chat but to no avail. The engineer is due tomorrow between 8am and 5pm. I would appreciate any advice. Thanks
honar wrote:
How cancel my engineer appointment ??
I did post a way that you might be able to do this without contacting Sky earlier in this topic, are you not able to see this post ?
Similar Messages
-
Engineer appointment cancelled without notificatio...
Hey,
We ordered Infinity option 2 on 21 April 2011 and it is supposed to be activated this Friday (13th May).
However, it now says "Your appointment is no longer required, as our engineer can connect your line without requiring access to your premises. The engineer will work to connect your line at the exchange."
I have done a bit of searching, and it seems an engineer visit is definitely needed for an Infinity installation. Could someone confirm whether or not this is the case, and if so, what my next step should be?
Thanks!squatly wrote:
Definitely ordered Infinity, here are some more details:
Status: In Progress
Reference number: VOL011-**********
Here are some screenshots form my tracking page:
Equipment Delivery and BT Infinity Option 2:
http://i.imgur.com/C2iq8.png
Activation Dates:
http://i.imgur.com/oCLUZ.png
Oh and I did get a confirmation email, with the following:
About your engineer visit
Your
Will visit
On
Arriving
BT broadband engineer
13 May 2011
8am - 1pm
Your package is: Broadband and Calls
Your contract is for: 18 months starting on 13 May 2011
Your broadband starts on:
13 May 2011
Your username is:
Your password is: [*******]
Your download speed should be:
37.3Mb
Your upload speed should be:
9.8Mb
It seems since I received the email, BT have cancelled the engineer appointment without contacted us...
Hi there,
Just a heads-up If I were you, I would edit out your VOL number from your post; it is personal to you and shouldn't be disclosed publicly, for security reasons. I would also consider editing out your username and password details for the same reason.
I hope this info helps. -
Re: BT cancelling Engineer appointment
Hi i recently ordered BT infinity and on my order confirmation it says it will be activated on 17th June and the engineer appointment was booked for same day. When i tracked my order today it says the appointment with the engineer has been cancelled as they do not require access to the premises. I already know that the engineer definately needs into the premises as they brings the new Modem with them. I dont know where to go from here as i rang Customer Service and was given very vague answers and i am still none the wiser. any help appreciated.
It looks like the Infinity Install is not going ahead for some reason, possibly cab not ready yet or fault somewhere. Give them another call and ask them to explain in laymans terms what is happening.
If you still cannot get a answer get in touch with the mods:
http://bt.custhelp.com/app/contact_email/c/4951 they should be able to find out what is happening and explain it to you
toekneem
http://www.no2nuisancecalls.net
(EASBF) -
Best number to call to cancel an engineer appointm...
My mother has just subscribed to BT broadband and TV.
She was not able to set it up herself so arranged for an engineer to call on Saturday the 16th of May.
A friend was able to set it up for her today so she telephoned the broadband helpline to cancel the engineer.
My mother is hard of hearing and found it difficult to communicate but the lady at the other end did say she had cancelled the engineer and my mother will get a confimation e-mail. It has not arrived.
Is there another number or email address that she can use to make sure the engineer appointment is cancelled and she is not charged?
She does have the emails from BT telling her when her broadband equipment would be delivered and she has replied to that but I think those email addresses are not read or replied to.Just call 0800 800 150, the should be able to cancel the visit once you tell them the equipment has now been set up.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
How to cancel the event in Item Adding without going to the SharePoint Error Page?
Prevent duplicate item in a SharePoint List
The following Event Handler code will prevent users from creating duplicate value in "Title" field.
ItemAdding Event Handler
public override void ItemAdding(SPItemEventProperties properties)
base.ItemAdding(properties);
if (properties.ListTitle.Equals("My List"))
try
using(SPSite thisSite = new SPSite(properties.WebUrl))
SPWeb thisWeb = thisSite.OpenWeb();
SPList list = thisWeb.Lists[properties.ListId];
SPQuery query = new SPQuery();
query.Query = @"<Where><Eq><FieldRef Name='Title' /><Value Type='Text'>" + properties.AfterProperties["Title"] + "</Value></Eq></Where>";
SPListItemCollection listItem = list.GetItems(query);
if (listItem.Count > 0)
properties.Cancel = true;
properties.ErrorMessage = "Item with this Name already exists. Please create a unique Name.";
catch (Exception ex)
PortalLog.LogString("Error occured in event ItemAdding(SPItemEventProperties properties)() @ AAA.BBB.PreventDuplicateItem class. Exception Message:" + ex.Message.ToString());
throw new SPException("An error occured while processing the My List Feature. Please contact your Portal Administrator");
Feature.xml
<?xml version="1.0" encoding="utf-8"?>
<Feature Id="1c2100ca-bad5-41f5-9707-7bf4edc08383"
Title="Prevents Duplicate Item"
Description="Prevents duplicate Name in the "My List" List"
Version="12.0.0.0"
Hidden="FALSE"
Scope="Web"
DefaultResourceFile="core"
xmlns="http://schemas.microsoft.com/sharepoint/">
<ElementManifests>
<ElementManifest Location="elements.xml"/>
</ElementManifests>
</Feature>
Element.xml
<?xml version="1.0" encoding="utf-8" ?>
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<Receivers ListTemplateId="100">
<Receiver>
<Name>AddingEventHandler</Name>
<Type>ItemAdding</Type>
<SequenceNumber>10000</SequenceNumber>
<Assembly>AAA.BBB, Version=1.0.0.0, Culture=neutral, PublicKeyToken=8003cf0cbff32406</Assembly>
<Class>AAA.BBB.PreventDuplicateItem</Class>
<Data></Data>
<Filter></Filter>
</Receiver>
</Receivers>
</Elements>
Below link explains adding the list events.
http://www.dotnetspark.com/kb/1369-step-by-step-guide-to-list-events-handling.aspx
Reference link:
http://msdn.microsoft.com/en-us/library/ms437502(v=office.12).aspx
http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspx
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.Recommended way for binding the list event handler to the list instance is through feature receivers.
You need to create a feature file like the below sample
<?xmlversion="1.0"encoding="utf-8"?>
<Feature xmlns="http://schemas.microsoft.com/sharepoint/"
Id="{20FF80BB-83D9-41bc-8FFA-E589067AF783}"
Title="Installs MyFeatureReceiver"
Description="Installs MyFeatureReceiver" Hidden="False" Version="1.0.0.0" Scope="Site"
ReceiverClass="ClassLibrary1.MyFeatureReceiver"
ReceiverAssembly="ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391">
</Feature>For registering/binding the list event handler to the list instance, use the below sample codeusing System;
using Microsoft.SharePoint;
namespace ClassLibrary1
public class MyFeatureReceiver: SPFeatureReceiver
public override void FeatureActivated(SPFeatureReceiverProperties properties)
SPSite siteCollection = properties.Feature.Parent as SPSite;
SPWeb site = siteCollection.AllWebs["Docs"];
SPList list = site.Lists["MyList"];
SPEventReceiverDefinition rd = list.EventReceivers.Add();
rd.Name = "My Event Receiver";
rd.Class = "ClassLibrary1.MyListEventReceiver1";
rd.Assembly = "ClassLibrary1, Version=1.0.0.0, Culture=neutral,
PublicKeyToken=6c5894e55cb0f391";
rd.Data = "My Event Receiver data";
rd.Type = SPEventReceiverType.FieldAdding;
rd.Update();
public override void FeatureDeactivating(SPFeatureReceiverProperties properties)
SPSite sitecollection = properties.Feature.Parent as SPSite;
SPWeb site = sitecollection.AllWebs["Docs"];
SPList list = site.Lists["MyList"];
foreach (SPEventReceiverDefinition rd in list.EventReceivers)
if (rd.Name == "My Event Receiver")
rd.Delete();
public override void FeatureInstalled(SPFeatureReceiverProperties properties)
public override void FeatureUninstalling(SPFeatureReceiverProperties properties)
}Reference link: http://msdn.microsoft.com/en-us/library/ff713710(v=office.12).aspxOther ways of registering the list event handlers to the List instance are through code, stsadm commands and content types.
Amalaraja Fernando,
SharePoint Architect
Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights. -
How to cancel an order if transaction not complete
How to cancel an order if transaction not complete
Presuming you're referring to a purchase from the iTunes Store, go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. Refunds are not guaranteed, but iTunes support should be able to help you in one way or another.
Regards. -
How to cancel an order or to remove one item, bought as a guest?
how to cancel an order or to remove one item, bought as a guest?
That does not help at all.
Please explain. Use sentences please.
How do you buy something as a guest?
You have an iphone?
You purchased an app?
You don't want the app? Simply delete it. This is covered in the manual.
If you do not explain what you are talking about, then it is very difficult to help -
How to cancel excise invoice when mov type is 122
Hello,
We are creating the PO for one material. and make the GR for that material (material is Quality inspection material)
so i,e the reason the material is goes to Quality inspection.
Till then we are Made the J1IEX create the Part1 and Part2 entry.
So in mean while in Quality all the material's are rejected so, now how to reverse the Part1 and Part2 entries.?
How to cancel excise invoice when material is qulaity inpspection.
What i made:
Made the Return delivery means 122 mov doc and Try to cancell the excise invoice......but no successful
Regards
sapman manHi
Cancelling of excise invoice will be done in the following ways depending on the situation.
Case 1:
Create PO
Do MIGO (create and post excise invoice)
Create return delivery in quality inspection.
Now we have to create a rejection inmvoice in J1IS with reference to the return delivery wherein the excise values gets reversed.
If u try to reverse part 2 entries in J1IEX it will not come.
Case2:
Create PO
Do MIGO (create and post excise invoice)
Do cancellation of MIGO (102 mvt)
With ref to vendor or internal excise invoice number just post the transaction. excise part 2 entries will get reversed. This will happen only if 102 entry exist for the PO line item.
In a nutshell excise entries cancellation comes only if we cancel the material document. If we do return delivery then we have to create rejection excise invoice.
Hope u get cleared in this regards
Reg
Raja -
HT1918 how to cancel itunes match
How do I cancel this? I emailed this useless **** at apple and she gave me the wrong ansewer. I already did put no renew of itunes match.
anyone know how to cancel this?
Hello Ari,
Lisa here, from iTunes Store Support. I understand that you would like to cancel your iTunes Match subscription. I am sure you are eager to have this issue resolved and I would be happy to assist you today!
Please note that if you have an iTunes Match subscription, you can't change countries until the subscription has expired. Your subscription expires 08/18/2013.
To turn off Auto-Renew for iTunes Match, follow these steps:
1) Open iTunes.
2) From the pull-down Store menu in the menu bar, Choose Store > Sign In.
3) Enter your iTunes Store account name and password, then click Sign In.
4) Go to the Store menu again, Choose Store > View My Account.
5) Enter your account name and password a second time, then click View Account.
You will be taken to your Apple Account Information page. On this page, simply click the "Turn Off Auto-Renew" button next to iTunes Match.
For more information about iTunes Match, visit:
http://www.apple.com/icloud/features/
http://www.apple.com/itunes/whats-new/
I hope this information is helpful! Please let me know if you require any further assistance with your account, as if you do, I would be glad to help. Thank you very much for being part of the iTunes Store family, Ari. I hope you have a great day!
Sincerely,
Lisa
iTunes Store/Mac App Store Customer Support
http://www.apple.com/support/itunes/ww
Thank you for allowing me the opportunity to assist you.
First Name : ari
Last Name : newman
Email : [email protected]
Apple ID (Optional) : [email protected]
Lang_Country : en_AU
Product : iTunes Store
Support Subject : Purchases, Billing & Redemption
Sub Issue : itunes match
GCRM Case ID : 413932684
See additional info below
Choose the iTunes Store or App Store for your country: Australia
Item title: how to cancel itunes match
Order number:
Details:
Hi how do I cancel my itunes match? I dont use and I am moving countries soon. please let me know what I need to do to cancel iTunes Match?
thanks
© 2013 Microsoft
Terms
Privacy
Developers
English (United States)
© 2013 Microsoft
Terms
Privacy
Developers
English (United States)Brian,
Again, not accurate. When Match is "turned off" all of the Matched song instances are still shown in the Ibrary and all devices still stream - so, if you have your songs also stored on your local drive (which I choose to as one does not always have access to WiFi and I use the local instances of the songs for some music production/DJing), iTunes shows each song twice. This is cumbersome if you simply want to play an album - you have to hear each song twice. There is no reason technologically they could not simply show the metadata for a song only once and simply hit the cloud object store when it it is not found as a local disk target. This would solve some of the issues and it is pretty much how any content delivery network (CDN) works - and this is how my local Genius Bar assured me it would work before I bought the service. I found they know little about Match.
Other issues: I believe the "exclusive" Cloud Playtlist logic still stands - iTunes protests if you add a non-Matched song to a Playlist (as it assumes you want all Playlists to be cloudy). Also, the APLCARE person and I could not figure out what "Removed" (under Cloud Status) means despite looking up several explanations on the Web. And, we found songs that were only in the cloud that should have also been on my local drive as I never deleted them. That said, it is also a pain to fully delete a song (local + the cloud). Plus, the logic in the Purchased section around what constitutes "Not On Computer" did not hold up. They have lots of logical challenges with thier workflow.
Regardingyour suggestion, there is no way to "not use" Match. Only when one is disconnected from the iTunes store does Match seem to go away completely.The only thing you can turn off is the song syncing/matching/uploading. This amounts only to turning off a sub-process not the service.
Match is likely fine for most who do not want to have any copy of the songs locally and are fine having access to their music only when connected via WiFi. I wanted more ubiquitous access to my collection from my iPad and my iPhone but needed to keep my songs local to my MBP too. This is not the proper use case as I have learned.
Of course I won't renew, but I should be able to cancel a service that I am dissatisfied with. -
Hi
Recentky I have added a new icloud account to my iPhone 5s but my email is now hacked! so I can't complete the verification procedures. How to cancel the current verification process????plszz help me...Ah thanks Razmee however there is NO option to delete the iCloud account in settings!
-
How can I put an appointment on multiple calendars at once
When I create a new calendar entry on my iPad or iPhone, I would like to add it to both my work calendar, which is an Outlook calendar synced to my Apple devices, and to my personal iCloud calendar, but iCal doesn't let me choose two calendars--only one or the other. And I can't find a way to just create the appointment on one calendar and copy it to the other, so I end up having to type in the same calendar entry twice--once for my iCloud calendar and once for my work calendar. Any ideas on how to make a single appointment appear on two different calendars without typing it in twice?
So far the only way I have figured out to do this is add the appointment to home calendar and then "invite" myself by sending the invite to my work email. Not the ideal solution, as you still end up with 2 appointments. But at least when you update the home one, it will send an updated invitation to your work email to keep the two appointments in sync. This does not appear to work in reverse so if you update the appointment on your work calendar it does not go back and change the one on your home calendar.
I would be interested if anyone has a better solution, as I don't love this one. -
How to cancel tabbed viewing in Fireworks CS5?
How to cancel tabbed viewing in Fireworks CS5? I don't like tabs, but I couldn't find in Preferences an option to cancel it.
Choose Window > Cascade from the main toolbar.
-
How to cancel an idoc in status 64
How to cancel an idoc in status 64
Hi Manju,
If you have table updation access then
Go to SE16 --> Table EDIDC --> Give your "IDoc number" --> change the status from 64 to "73 IDoc archived".
Or you can ask to your ABAPer to do that.
Hope it helps,
Regards,
MT -
How to cancel email notification from snapshot and simulation
Hi,
We've activated workflow template WS28700001 so that email notification can be triggered when task release. Meanwhile we are using snapshot and simulation at the same time. But when saving sanpshot or simulation the tasks which have status of released also trigger email nofitication. How to cancel this notification of snapshot and simulation?
Regards.Hi Ravi
I have added a Container Element(version) in workflow template WS28700001 and set a workflow start condition as follows.
&Task.Version& = ' '
Regards
Yemi -
Hello, I would like to know how to transfer one of my two "membership" to an other computer because I just bought a new Mac.... ? Or how to cancel it on my old laptop so I can activate it on my new computer. Thanks a lot !
Hi Virginie,
You need to go under the help menu option and sign out from Muse and then install it on the other computer that you want using the creative cloud desktop app.
- Abhishek Maurya
Maybe you are looking for
-
How to link Excel ActiveX document?
I would like to display the contents of an Excel workbook on the front panel of a VI. I have created an OLE container on the panel and inserted an Excel Worksheet document as the object. Labview has set refnum type to excel.workbook and everything wo
-
My ipod nano not recognized with windows 8
I purchased an Ipod Nano today and I am going crazy trying to sync my music to it from my Windows 8 pc. HELP!!!
-
Issue in Pricing Type in copy control: sales document to sales document
Hi, I am trying to create a sales order with reference to quotation. I have a pricing procedure assigned to both documents. Now the business scenario is - 1. Create a quotation. for a material of x quantity 2. create a sales order with reference to t
-
I am not able to answer the call from i phone 5 after updating ios7 can u assist me to solve
after updating while ringing call not able to answer i restart and reset but still some call scren is hanging not able to answer can u assist me what to do next please
-
How do I print a list of the songs I have downloaded?
How do I print a list of the songs I have downloaded on I Tunes? Also I would like to know how to print a lable for the jewel case the cd's go in.