How to change Auto-generated web service's URL

Hi,
is it possible to change/edit the auto-generated url of a web services created with the wizard in SE80 transaction?
Example:
Now the wizard generates a URL as following:
http://<host name>:8080/sap/bc/srt/wsdl/bndg_4BC67655E5155680E10000000A7B0410/wsdl11/allinone/standard/document?sap-client=001
where the alfa-numeric code 4BC67655E5155680E10000000A7B0410 changes every time I create the service. at the same time and for the reason above, I have to change the LOGICAL DESTINATION with "visual administrator" application to consume the service in SAP Netweaver environment.
Thanks in advance.
Luca

Hi Luca,
Please refer the below link . it is described that URLs and its Namespaces . Please check whether its useful.
[http://help.sap.com/saphelp_nw70/helpdata/EN/8c/780741375cf16fe10000000a1550b0/frameset.htm] .

Similar Messages

Parameter names change when generating web service from WSDL

Hi,
I have a problem with BEAs web services that I'm hoping someone can help me with.
I have a
WSDL file, and from that I want to generate a web service implementation and a
web service
client. In the WSDL file, I have a message defined like this:
<message name="someRequest">
<part xmlns:partns="http://www.w3.org/2001/XMLSchema" type="partns:base64Binary"
name="data"/>
</message>
I generate the server using the server using the wsdl2service Ant task, I implement
the necessary classes, and I deploy it. When I access the deployed web service,
the parameter name has changed, from "data" to "bytes". If I access the WSDL file
of the deployed web service, it says:
<message name="someRequest">
<part xmlns:partns="http://www.w3.org/2001/XMLSchema" type="partns:base64Binary"
name="bytes"/>
</message>
This happens for all parameters, string parameters are renamed to "string", base64Binary
parameters are renamed to "bytes", etc...
This poses a problem to me, because if I generate a web service client from the
original WSDL file, it will not be able to talk to my web service. Is there any
way of forcing a web service generated from a WSDL file to keep the parameter
names of the original WSDL file?
Any help in this is greatly appreciated.
Regards,
Petter

From a quick look of your WSDL, it seams that you are mixing document-literal-bare and document-literal-wrapped flavor of web services. WSA may be able to do a better job at working around this mixed flavors than JDeveloper.
If you have hand crafted this WSDL, I would recomend that you spend some time looking at the way WSDL are generated, with the java-first mode (or bottom-up), then author the WSDL you need for the final service.
Here are sample of bare-style :
<xsd:element name="getPupilAddressResponse" type="xsd:string"/>
<xsd:element name="getPupilAddressRequest" type="xsd:int"/>
Wrapped will looks like that:
<xsd:element name="getSENLevelResponse">
<xsd:complexType>
<xsd:sequence maxOccurs="1" minOccurs="1">
<xsd:element name="LevelDetails" type="tns:SENLevelRecord"/>
<xsd:element name="RecordCount" type="xsd:int">
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
Hope this helps,
Eric

Where is the jaxrpc-ri.xml file when auto-generating web services?

Is it possible to modify the targetNamespace property and endpoints directly from the SUN ONE studio 5 IDE??
We have upgraded from using the JWSDP and are using the studio tools to auto-generate the server artifacts, only we cannot modify the endpoints to match our old JWSDP jaxrpc-ri.xml file. I have no desire to auto-generate then manually edit all the *Serializer.java files.
Cheers,
Ben

Ben,
it should be somewhere in your jwsdp_base or jwsdp subdirectory in your user directory. The user directory is called studio5se_user unless you have decided to use something different.
Regards Jirka

Error generating Web service /BIC/CQZDS_WEB00001000 how to over come this?

HI,
Experts,
I have created Web service source system by taking: target system BI and source system XI.
After creation of Info objects i have created data source in RSA1 there will no error displayed while CHECK but while activating the data source it was displaying errors like:
1) Error generating Web service /BIC/CQZDS_WEB00001000
2) Error when activating DataSource ZDS_WEBSERVICE BIDCLNT100
what will be the reason for this error plezase provide me good idea or provide step by step web service scenarious.
Thank you,
Shabeer Ahmed.

Hi
Web AS 6.40 you can create a Web Service Proxy directly in Transaction SE80. Create a new package and right click on it. Choose Create -> Enterprise service / Web service -> Proxy object. Now you can choose how you want to provide the WSDL Source.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/80fa3dff-ce76-2a10-3f94-f3df8f2db5a2

How to generate web services for OAS with wsdl extension

Hi,
I wanted to know how to generate web services from Oracle Application Server especially with .wsdl extension and with document/literal style.
I know that earlier there was a tool called SmartConnect from BEA WebLogic.
But that will work only with ALSB (Aqua logic Service Bus). I guess that ALSB has been renamed as Oracle Service Bus by Oracle after the acquisition of WebLogic. My question is what is the new name for the SmartConnect Tool from WebLogic, which generates wsdl very easily from Oracle database.
I am unable to know the new name for SmartConnect and how to download that tool from Oracle web site.
Also, I want to know, whether there is any other way to generate the wsdl from Oracle, if so, please let me know.
Regards
Raman

Hi Jeethandra,
Please refere to the below link might be some help.
[http://help.sap.com/saphelp_mdmgds55/helpdata/en/45/069152856241e1e10000000a1553f6/frameset.htm]
regards
shankar

How do I invoke a web service?

I'm new to web services... and I have to find a way to connect to the microsoft reporting services web service....
But well I don't know how to connect to a web services...
Can someone direct me to a java tutorial about invoking web services?
Please? =)
Thanks,
Renato Fontes

Enter the string without the quote, then try to switch to the XML view and add the quotes. This should be a workaround for simple values.
You should also be able to generate a java client from JDeveloper in a few clicks, using the Wizard. As you can generate the JUnit template for the proxy (or stub), it's usually faster to re-run your test.
If this does not work for you, can you post the WSDL so we can see if there is any reason it does not work for you.
All the best,
-Eric

How can I call external web service from BPEL

1. I have "EmpService" webservice (simple webservice to get emp salary, not in BPEL domain) running in Oracle AS host1. If I want to call this web service from BPEL in another host2. How can I do this?
2. Is it a must to deploy this EmpService to Oracle BPEL domain in order to call it? If so, how can I deploy it. As many BPEL example tutorial demonstrate the "obant" command to deploy the BPEL process, but not show how to deploy a external web service not in BPEL project. Please help. ...

Create a partner link in BPEL and point it to the WSDL deployed on external server.
this thread will also help
Axis generated WS to Bpel WS

How can I invoke the web service manually in websphere?

Hi
I've developed a webservice application using Rational Application Developer (RAD). I deployed it in a websphere 6.1 application server, using the administration console to import the war file that I had previously exported with RAD.
My webservice application is listed in the "Enterprise Applications" section of websphere's administration console as started.
My question is: how can I invoke the web service manually? Is there some kind of websphere generated webpage that I can use to call it manually?
I tried http://<server:port>/<contextroot> and http://<server:port>/<contextroot>/<servicename> in a webbrowser, but it doesn't work. Is it possible to invoke the web service manually, or do I need to develop a client?
Thanks in advance
Pedro

Hi Bo Wang,
    Go to the Portal -> System Administration -> System Configuration
                           -> Portal Content folder
                           -> Open Visual Composer folder
    There you can see the Webservice Systems you have created through VC.
You can delete the unwanted system here.
Regards,
Shemim

Problem generating Web Service with business methods in multiple EJB's

Hi,
I'm I a "web service novice" but I'm working with an
application which was developed in an earlier version
of Studio which has
~30 business method coming from ~12 EJB's. When I attempt
to recreate the Web Service in Java Studio Enterprise 7 (had same problem versions 5 and 6) I have trouble. When I execute the "Generate Web Service Files" command I get complilation errors in the <webservice_name>.java file. It is obvious that the
protected Map theJNDIMap = makeJNDIMap();
protected Map makeJNDIMap() {
     Map m = new HashMap();
     // This map might get changed at deployment time
     m.put(......
is all screwed up. Entries are missing and the closing bracket isn't even there.
Is there some user error on my part?
Is this a know bug (I couldn't any info. and I get the same behavior on the current and older versions of Studio)?
Is there a workaround? I can fix this particular java file and compile it sucessfully. However, I'm still missing many of the other web service files that should be generated for me.
All the tutorials on web services that I've done to looked over all get there business method from 1 EJB :(
Please advise,
Freda Phelps

I had a problem too. Successfully created an EJB and its test application. Tested the same using Web client and works fine. Now created a web service from EJB methods. It created the skeletons. When tried creating Web Svc test client or web svc other files..it gives me an exception saying xmlservices.jar doesnt exist in the C:\Docs and Settings\<$username>\.jstudio\Ent04Q4modules. I have searched for this file and copied (overwritten) it into this directory. But still i cant proceed further.

Have problem when generate Web Service from bapi function

Dear all,
Please kindly help me about generating Web Service from BAPI function, It does not success only this attached function.
I have done so many function without any problems.
I found 1 case that I use specific variable to be an import/ export then, it can't create as well.
As for this one, I try so many changes but I can't success it as well.
This is my function on R/3 4.6C, Dot net connector 2.0, Dot net Frame Work 1.1.
FUNCTION Z_BAPI_ATTACHMENT_CREATE.
""Local interface: Type: Remote-enabled module
*" IMPORTING
*"     VALUE(P_BOTYPE) LIKE BORIDENT-OBJTYPE
*"     VALUE(P_BO_ID) LIKE BORIDENT-OBJKEY
*"     VALUE(P_MSGTYP) LIKE SOFM-DOCTP
*"     VALUE(P_DOCTY) LIKE BORIDENT-OBJTYPE
*"     VALUE(P_RELTYP) LIKE BRELTYP-RELTYPE
*"     VALUE(P_FNAME) LIKE RLGRAP-FILENAME
*"     VALUE(P_OBJDES) TYPE SO_OBJ_DES
*" EXPORTING
*"     VALUE(RETURNMESSAGE) TYPE CHAR50
INCLUDE : <cntn01>.
P_BOTYPE TYPE BORIDENT-OBJTYPE DEFAULT 'BUS2105'
P_BO_ID   TYPE BORIDENT-OBJKEY
P_MSGTYPE TYPE SOFM-DOCTP DEFAULT 'URL'
P_DOCTY   TYPE BORIDENT-OBJTYPE DEFAULT 'MESSAGE'
P_RELTYP TYPE BRELTYP-RELTYPE DEFAULT 'ATTA'
P_FNAME   TYPE RLGRAP-FILENAME
P_OBJDES TYPE SO_OBJ_DES
TYPES: BEGIN OF ty_message_key,
foltp TYPE so_fol_tp,
folyr TYPE so_fol_yr,
folno TYPE so_fol_no,
doctp TYPE so_doc_tp,
docyr TYPE so_doc_yr,
docno TYPE so_doc_no,
fortp TYPE so_for_tp,
foryr TYPE so_for_yr,
forno TYPE so_for_no,
END OF ty_message_key.
DATA : lv_message_key TYPE ty_message_key.
DATA : lo_message TYPE swc_object.
DATA : lt_doc_content TYPE STANDARD TABLE OF soli-line
WITH HEADER LINE.
First derive the Attachment's ( MESSAGE )document type.
p_docty = 'MESSAGE'.
CASE p_reltyp.
In case of URls
WHEN 'URL'.
    p_msgtyp = 'URL'.
In case of Notes / Private Notes
WHEN 'NOTE' OR 'PNOT'.
    p_msgtyp = 'RAW'.
WHEN 'ATTA'.
Take given parameter e.g. 'DOC', 'PDF' etc.
P_MSGTYP = 'EXT'.
WHEN OTHERS.
....exit
    EXIT.
ENDCASE.
Create an initial instance of BO 'MESSAGE' - to call the
instance-independent method 'Create'.
swc_create_object lo_message 'MESSAGE' lv_message_key.
define container to pass the parameter values to the method call
in next step.
swc_container lt_message_container.
Populate container with parameters for method
swc_set_element lt_message_container 'DOCUMENTTITLE' p_objdes.
swc_set_element lt_message_container 'DOCUMENTLANGU' 'E'.
swc_set_element lt_message_container 'NO_DIALOG' 'X'.
swc_set_element lt_message_container 'DOCUMENTNAME' p_docty.
swc_set_element lt_message_container 'DOCUMENTTYPE' p_msgtyp.
In case of URLs..it should be concatenated with &KEY& in the begining.
CASE p_msgtyp.
WHEN 'URL'.
lt_doc_content = '&KEY&http://www.rmtiwari.com' .
    CONCATENATE '&KEY&' p_fname INTO lt_doc_content.
    APPEND lt_doc_content.
In case of Notes or Private Notes, get the data from files on appl
server or from wherever(? - remember background).
WHEN 'RAW'.
    lt_doc_content = p_fname.
    APPEND lt_doc_content.
In case of PC File attachments
WHEN OTHERS.
    OPEN DATASET p_fname FOR INPUT IN BINARY MODE.
    IF sy-subrc EQ 0.
      DO.
        READ DATASET p_fname INTO lt_doc_content.           "2 of 27
        IF sy-subrc EQ 0.
          APPEND lt_doc_content.
        ELSE.
          EXIT.
        ENDIF.
      ENDDO.
      CLOSE DATASET p_fname.
    ENDIF.
ENDCASE.
'DocumentContent' is a multi-line element ( itab ).
swc_set_table lt_message_container 'DocumentContent' lt_doc_content.
Size is required in case of File attachments
DATA : lv_doc_size TYPE i.
DATA : l_file_lines TYPE i.
DESCRIBE TABLE lt_doc_content LINES l_file_lines.
READ TABLE lt_doc_content INDEX l_file_lines.
lv_doc_size = ( 255 * ( l_file_lines - 1 ) ) +
STRLEN( lt_doc_content ).
swc_set_element lt_message_container 'DOCUMENTSIZE' lv_doc_size .
Refresh to get the reference of create 'MESSAGE' object for attachment
swc_refresh_object lo_message.
swc_call_method lo_message 'CREATE' lt_message_container.
Get Key of new object
swc_get_object_key lo_message lv_message_key.
Now we have attachment as a business object instance. We can now
attach it to our main business object instance.
Create main BO object_a
data: LO_IS_OBJECT_A type SIBFLPORB. "type SIBFLPORB is unknown, so I
DATA: lo_is_object_a TYPE borident.
lo_is_object_a-objkey = p_bo_id.
lo_is_object_a-objtype = p_botype.
LO_IS_OBJECT_A-CATID = 'BO'.
Create attachment BO object_b
data: LO_IS_OBJECT_B type SIBFLPORB. "type SIBFLPORB is unknown
DATA: lo_is_object_b TYPE borident.
lo_is_object_b-objkey = lv_message_key.
lo_is_object_b-objtype = p_docty.
LO_IS_OBJECT_B-CATID = 'BO'.
*TRY.
*CALL METHOD CL_BINARY_RELATION=&gtCREATE_LINK
EXPORTING
IS_OBJECT_A = LO_IS_OBJECT_A
IS_OBJECT_B = LO_IS_OBJECT_B
IP_RELTYPE = P_RELTYP.
CALL FUNCTION 'BINARY_RELATION_CREATE'
EXPORTING
    obj_rolea    = lo_is_object_a
    obj_roleb    = lo_is_object_b
    relationtype = p_reltyp
EXCEPTIONS
    OTHERS       = 1.
Check if everything OK...who cares!!
COMMIT WORK.
if sy-subrc = 0.
RETURNMESSAGE = 'S-Success'.
else.
RETURNMESSAGE = 'E-Error'.
endif.
ENDFUNCTION.
Thanks in advance,
Benjawan
Edited by: Nitipat Chadchavalpanichaya on Oct 20, 2008 9:02 AM

There is no any error message show up. It just the class
Z_BAPI_ATTACHMENT_CREATE doesn't create autometically as normal. I showed you as below.
That means I can't call class z_bapi_attachment_create.
' <autogenerated>
'     This code was generated by a SAP. NET Connector Proxy Generator Version 2.0
'     Created at 21/10/2551
'     Created from Windows
'     Changes to this file may cause incorrect behavior and will be lost if
'     the code is regenerated.
' </autogenerated>
Imports System
Imports System.Text
Imports System.Collections
Imports System.ComponentModel
Imports System.Runtime.InteropServices
Imports System.Xml.Serialization
Imports System.Web.Services
Imports System.Web.Services.Description
Imports System.Web.Services.Protocols
Imports SAP.Connector
'@ <summary>
'@ Client SAP proxy class
'@ </summary>
<WebServiceBinding(Name:="dummy.Binding", Namespace:="urn:sap-com:document:sap:rfc:functions")> _
Public Class PRAttachment
    Inherits SAPClient
    '@ <summary>
    '@ Initializes a new PRAttachment.
    '@ </summary>
    Public Sub New()
    End Sub
    '@ <summary>
    '@ Initializes a new PRAttachment with a new connection based on the specified connection string.
    '@ </summary>
    '@ <param name="connectionString">A connection string (e.g. RFC or URL) specifying the system where the proxy should connect to.</param>
    Public Sub New(ByVal ConnectionString As String)
      MyBase.New(ConnectionString)
    End Sub
    '@ <summary>
    '@ Initializes a new PRAttachment and adds it to the given container.
    '@ This allows automated connection mananged by VS component designer:
    '@ If container is disposed, it will also dispose this SAPClient instance,
    '@ which will dispose a contained connection if needed.
    '@ </summary>
    '@ <param name="Cont">The container where the new SAPClient instance is to be added.</param>
    Public Sub New(ByVal Cont As Container)
      MyBase.New(Cont)
    End Sub
End Class

Generating web service Files

While generating web service files, I get the following error:
Error during JAXRPC generation. See Output window
which says:
error: Type "javax.xml.soap.SOAPElement" implements more than one interface, interfaces: "javax.xml.soap.Node", "org.w3c.dom.Element" ...
I am new to developing web services, so maybe this is a simple setting that I need to change. Has anyone dealt with a similiar issue and solved the problem?
Thank you.

Kindly send me the method signature of the web service operation.
Thanks.
Rico Cruz

How to activate trace for web services

Hi Experts,
How to activate trace for web services in SOAMANAGER.
We are not able to view the Payload trace of the error logs.
Can anyone please let me know how to go about this???
Regards,
Ashwini

Hi Ashwini,
The thread below might be useful to you:
[SOAMANAGER - Get the XML generated;
Regards, Trevor

JDev: Generating Web Services for Streaming Attachments

Hi,
I am a newbie in this field. I am trying to generate web service code using JDev (10.1.3.3). I have an interface class and the implementation class. When I am trying to generate J2EE Web Service for the implementation class, I am getting the following error:
"The selected class doesn't contain any public method publishable in a web service".
Following is my code:
Interface:
package testing;
import oracle.webservices.attachments.Attachments;
public interface ImageStore extends java.rmi.Remote {
public void storeImage (String name, String desc, Attachments attachments) throws java.rmi.RemoteException;
Impl:
package testing;
import java.io.InputStream;
import javax.activation.DataHandler;
import oracle.webservices.attachments.Attachment;
import oracle.webservices.attachments.Attachments;
import oracle.webservices.attachments.IncomingAttachments;
public class ImageStoreImpl {
public static String storeImage(String name, String desc, Attachments attachments) throws Exception {
IncomingAttachments incomingAtts = attachments.getIncomingAttachments();
if (incomingAtts == null || !incomingAtts.hasNextAttachment())
throw new Exception("Expected request attachments");
Attachment imageAtt = incomingAtts.nextAttachment();
String id = imageAtt.getId();
DataHandler dataHandler = imageAtt.getDataHandler();
InputStream imageStream = dataHandler.getInputStream();
//-- Store image metadata and stream image bytes
if (incomingAtts.hasNextAttachment())
throw new Exception("Expected only one attachment");
return "success";
Can someone please let me know how can I generate the web service for this code using JDev.
Thanks,
J

Hi J,
Why is the concrete class not implementing the ImageStore interface? Anyways, I believe the ImageStoreImpl#storeImage method cannot be static if you want to generate a WS.
Furthermore, you should consider posting your question in the JDev 10G (JDeveloper and ADF forum as this one is for 11G.
Olivier

JDev: Generating Web Services for Streaming Attachment

Hi,
I am a newbie in this field. I am trying to generate web service code using JDev (10.1.3.3). I have an interface class and the implementation class. When I am trying to generate J2EE Web Service for the implementation class, I am getting the following error:
"The selected class doesn't contain any public method publishable in a web service".
Following is my code:
Interface:
package testing;
import oracle.webservices.attachments.Attachments;
public interface ImageStore extends java.rmi.Remote {
public void storeImage (String name, String desc, Attachments attachments) throws java.rmi.RemoteException;
Impl:
package testing;
import java.io.InputStream;
import javax.activation.DataHandler;
import oracle.webservices.attachments.Attachment;
import oracle.webservices.attachments.Attachments;
import oracle.webservices.attachments.IncomingAttachments;
public class ImageStoreImpl {
public static String storeImage(String name, String desc, Attachments attachments) throws Exception {
IncomingAttachments incomingAtts = attachments.getIncomingAttachments();
if (incomingAtts == null || !incomingAtts.hasNextAttachment())
throw new Exception("Expected request attachments");
Attachment imageAtt = incomingAtts.nextAttachment();
String id = imageAtt.getId();
DataHandler dataHandler = imageAtt.getDataHandler();
InputStream imageStream = dataHandler.getInputStream();
//-- Store image metadata and stream image bytes
if (incomingAtts.hasNextAttachment())
throw new Exception("Expected only one attachment");
return "success";
Can someone please let me know how can I generate the web service for this code using JDev.
Thanks,
J

Can anyone please help me -- I am really stuck.
Thanks,
J

FlexBuilder Generated Web Service Stubs and requestTimeout

I generated webservice stubs from a WSDL using Flexbuilder and during an operation I would like the request to timeout after a certain amount of time (say 5 seconds). How would I get the generated web service stub to generate a timeout fault? I tried setting the requestTimeout property in the autogenerated BaseService class, but it seems to have no effect

Can you point me to any documentation that gives more information about this ? Because I came across a scenerio's once wher if I provide Ties it will accept them and it will not re-create them .........
Both are tow scenerio with "server" = true option :
Here's when it won't do it :
If I run wscompile on a config file that provide's "service" tag and include all those ties generated in deployement file it won't re-create the ties.
Bur here's when it will :
If I run wscompile on config file that provides "wsdllocation" tag and than include those genertaed files in the deployement than it will re-create the ties again .
Any idea about that ?
Prashant

How to change Auto-generated web service's URL

Similar Messages

Maybe you are looking for