How to change focus sequence in transaction VA01?

Hi all,
after upgrading our systems from 4.6c to ECC6.0 the focus sequence in the table control of transaction VA01 has changed.
After entering a Material and pressing enter the focus switched to column Order Quantity of the same row in our 4.6c system.
In ECC6.0 pressing enter causes the focus to go to Material in the next row
Is there any way to change the focus sequence without doing a modification?
Using the TAB-key is no alternative for our users.
Regards,
Hubert

I think that I've found some usable solution.
There is the input check "module vbap_bearbeiten_ende on chain-request." for fields rv45a-mabnr and rv45a-kwmeng of dynpro 4900/SAPMV45A.
The form vbap_bearbeiten_ende which is called by PAI-module vbap_bearbeiten_ende provides several enhancement-points.
When I create a warning message in an implementation of an applicable enhancement-point, the desired performance should come back to our users.
SAP Note 0001309393 will also solve my problem.
Edited by: Hubert Heitzer on Jul 15, 2009 9:48 AM

Similar Messages

How to change focus in programmatic way?

Hi,
1. how to change focus in programmatic way?
2. is there any way to define tab index?
With Regards,
Wai Phyo

1). http://docs.oracle.com/cd/E16162_01/apirefs.1112/e17491/tagdoc/af_scrollComponentIntoViewBehavior.html
2). no

Ship-to address blanks out after changing in header of transaction VA01

Experts,
When I change the ship-to party address(ex: street and city) in header->partner in VA01 transaction and hit the button 'Branch Transfer' (Implemented Badi) in main screen of VA01, then the ship-to address blanks out and just remains WE and Ship-to party no. and remaining everything like name, street, city and postal code erases.
When I did the same change without hitting the 'Branch Transfer' button in the same main screen of transaction VA01' it works fine and it kept all the fields like WE, Ship-to party no, name, street, city and postal code.
I spent lot of time in debugging by checking what is happening before and after hitting 'Branch Transfer' button and I also checked the internal tables XVBPA and XVBADR but I didn't find the correct solution.
One more thing I would like to share with you is, once I change the ship-to party address in VA01 it is keeping the old address and new address in the tables XVBADR and XVBPA with the address numbers as WE $0000.
Could you please verify and let me know what exactly the problem when I change the ship-to part address in the transaction VA01.
<Points offer removed by moderator>
Regards,
Kalikonda.
Edited by: Vinod Kumar on Sep 26, 2011 11:36 AM

Experts,
Is there any solution for this ?
Regards,
Kalikonda.

How to change the sequence that VL10 use for sales order during DN creation

We are using VL10 for DN creation , VL10 is executed in background as a batch job ..... we have created a variant and have given range of shipping points for which we want to create the Deliveries.
What we want to understand is that how SAP standard code for VL10, sorts the sales orders for which the delivery are to be created using VL10?
we would like VL10 to process the sales order which belong to same shipping point in some order....so that delivery needs to be created for the first sales order rather than last sales order for a given shipping point....
Is there any sort order that SAP follows to pick which order it will consider for delivery creation ....first over the other sales order where the shipping happens to be same ? if yes then is there any way we can change it ?
Any guidance is appreciated
Thanks
Rajey

We are facing the same problem and are running at 4.7.
There are orders with the same goods issue date and if so, it should be sorted by order no.
Nevertheless, it does not sort it by order no but we could not find yet what the sort criteria is if it runs in the background and how to change these rules.

How to change the sequence number in the test packages?

Hello,
I need to change the sequence number in the test packages. Currently I use "move test case." However you can only move one item at a time.
There is another option to make this change?
Best regards,
Elisabete

Hi Elisabete,
Sorry, I've to acknowledge the reply from Fabricius.
That's poor in release 7.0. A former version provided a solution where it was possible to move a testcase even over pages at once. May be SAP changed this functionality because of other problems caused by the former solution.
Therefore I am looking for a business blueprint structure meeting the logical and operational process for little need of changes in sequences. And I create E2E-scenarios / E2E-processes as an additional structure in a project to have an easier approach in the Test Workbench. An other option is to divide test packages into smaller ones.
I hope we can look foreward to a better and more comfortable solution in release 7.1.
Best regards,
Adelbert

How do change the sequence of pages in a PDF file. Need to move page 3 to 12

How do I change the page sequence in a document. eg Want to move page 3 to 12

Hi leoniep,
To reorder pages in a PDF, you need to use Acrobat (you can drag the page thumbnails to rearrange the pages). If you don't have Acrobat, you're welcome to try it for free for 30 days. See http://www.adobe.com/products/acrobat.html for more information.
Best,
Sara

How to change focus within JTextPane

Hi
I have a JTextPane within a JScrollBar. I have a requirement to change the focus to particular line in the JTextPane on the click of a button. i.e. The JTextPane has to scroll down to that location on clicking the button. Do we have any built in APIs for this functionality ? Or how can we accomplish this ?

play with modelToview and viewToModel methods to go where you want to go.
Then you can set the caret position and request focus.

How to change the description of Transaction Type

hi ,expert
   i want to change the description of Tansaction type.
    eg, change the description of BUS2200 :'RFx '   to 'RFQ' .
    please give me some advice. thanks in advance.
     regards
            claud

Hi Claud,
Go to SPROSRM ServerCross App Basic SettingsNumber rangesDefine transaction typesSelect BUS2200 and double click on transaction typesHere you will see BID (transaction type)--Just double click on this and in the screen that follows change the description.
PS: The system will generate a transport request.
Regards,
Nikhil

I cannot figure out how to change/add categories to transaction page on numbers. i do not have pop up format option on iPad (or can't find it)

Am using numbers on iPad. was able to change categories on budget page but am not having luck with finding way to modify on transaction page. have looked at other responses to similar question and they say to use data format for pop up menu. i do not have this option (or can't find) on my iPad. any guidance greatly appreciated

Hi hovep,
Click your cell, click the paintbrush icon. Tap Format and scroll down to Popup Menu. You can edit your popup there. When you are done don't forget to fill it down.
quinn

How to change program for a transaction

Hi i have one program already assigned to the transaction code.
i want to assign the same transaction code to other program instead of the existing one. please give me steps to change.
thanks in advance
KP

Hi,
Go to SE93 and press chaneg button adn remove the name of the program and assign the new program name to the tcode.
But make sure that the <b>program type</b> is the same otherwise it will dump.
If the type is different <b>delete the TCODE and create it as a fresh.</b>.
Because u have to choose a different option for different program types while u create a TCODE.
Hope this helps.
Please reward points and close the thread if ur query is answered.

How to change focus?

I'm working on a prototype that needs the HTML's anchor (#anchor) interaction. So when the user clicks a button, it will scroll them down to a different area of the swf. This will be a vertically long prototype (2300px high), so when the user clicks a button on the top, it will scroll them down to another section on the bottom. I usually see small websites made with FC, so i don't know if the functionality is built in to support this type of interaction.
Thanks for the help!!
-Sergie

Thanks for the reply Chris.
This isn't a traditional website, but an application that's on the web. Since it requires a lot more interaction than a basic website, Flash Catalyst seems perfect for the job (for prototyping it and user testing it). The only thing that i'm concerned about is how it will interact inside of the browser because it's a vertically long project. I know Axure does prototyping very well, but not for high-fidelity interactions like FC.
Are you familiar with any online resources i can check out (maybe a forum) to create this sort of anchor interaction? (I'm not very familiar with actionscript and javascript.)
-Sergie

How to change XML Tag sequence in XML Publisher Reports

Hi Experts,
I am working on XML Publisher reports, EBS 11I and Database 9i. I have standard report 'PO Printed Purchase Order Report (XML)', it's output type is XML. I want to change the sequence of groups in XML file.
I am getting XML tags like below at present:
LIST_G_HEADERS \ G_HEADERS \ LIST_G_HEADER_NOTES
I want to change the sequence of groups like below.
LIST_G_HEADERS \ G_HEADERS \ LIST_G_LINES \
Could somebody help me how to change the sequence of XML Groups.
Thanks in advance.

Paul,
This works. Thanks!
I am still working through the implications of having a data connection defined. I notice that every time I submit, it creates two records in my database, one with all the fields blank, and one with the data and attachment.
I will have to do some more digging into the double submission, but at least it is uploading the file.
Thanks again,
Ed

[OKP1]Change the sequence of CO objects on the screen

Dear everyone,
Could anyone tell me how to change the sequence of CO objects on the screen in OKP1?
Or it is just another mission impossible?
Pls offer me some tips, I appreciate your help in advance.
Regards,
SCW

Hi...
how about a custom screen (have your abap developer involved) that will have the OKP1 transactions in the order you like and a custom SAVE button that when pressed will make a batch input to associated OKP1 transactions?
cheers
pan

How to change the fields order by pushing the TAB button?

Hello.
I have 4 input fields on a screen that i have build.
When i'm running the screen, I can move from one field to
another by the TAB button.
I need to set a different moving order that is performed by the TAB button.
For example: the fields are 1,2,3,4. if I use the TAB button to move from one field to another- the order is 1->2->3->4.
I want it to be 1->3->2->4.
Is it possible??
Thanks, Barak.

Hi Barak Sahar,
a) set the initial cursor at dynpro level
b) set the cursor positions dynamically using codeSET CURSOR[/code]
Here are the online help links I found:
http://help.sap.com/saphelp_470/helpdata/EN/9f/dbac0b35c111d1829f0000e829fbfe/frameset.htm
http://help.sap.com/saphelp_470/helpdata/EN/9f/dba47e35c111d1829f0000e829fbfe/frameset.htm
Go through below thread...
How to change the sequence of fields accessed with the tab key on a dynpro;&#56907;
Hope it will solve your problem
<REMOVED BY MODERATOR>
Thanks & Regards
ilesh 24x7
Edited by: Alvaro Tejada Galindo on Dec 25, 2007 9:13 AM

How can i change the sequence of text element in standard driver program ?

Hi,
can u tell me how can i change the sequence of text element in standard sapscript driver program.. without making a zcopy of standard driver program.
My problem is when MEDRUCK form is getting printed for PO print , header text is coming before item. But the requirement is to come it after item.So how cani do that without making the zcopy of SAPLMEDRUCK program..Is there any enhancement point in SAPLMEDRUCK driver program..where i can put my customise code for changing the sequence of text element ?

Hi,
Just copy the MEDRUCK to ZMEDRUCK. No need to copy the driver program.
1) SE71Menu > Utilities > COpy from Client
MEDRUCK ->>Client 000
New formname ZMEDRUCK
2) Now open the ZMEDRUCK in DE language in SE71
3) Menu > Utilities > Convert original Language
Change DE to EN, save and activate
4) Now open the ZMEDRUCK in EN language
5) Goto Pagewindows > Main window,
Look for the HEADER text Text element, copy the whole code under this Text element just after the ITEM text Text element, and comment the HEADER text above.
Now the Header text Text element will be below ITEM text only. This will full fill your requirment.
Now goto NACE transaction and add the copied ZMEDRUCK to the EF application.
Regards
Bala Krishna

How to change focus sequence in transaction VA01?

Similar Messages

Maybe you are looking for