How to change Form Builders output folder

Hello,
we have a big forms migration project in our company and are currently setting up our development envirionment.
We have a src/ and a run/ folder.
src/ holds the sources like fmb, run/ holds the fmx, plx etc.
The run/ folder is the folder where oc4j searches for the fmx.
The src/ folder MUST be the working dir of Oracle Forms Builder(OFB), because the builder searches for *.pll in his working dir. If it does not find them, the librarys will be removed from the form (thus, they will never ever run).
The problem for us is, that OFB compiles the files to working dir (src/). We will have to copy them manualy to run/ to test them*.
*I know, you can start each form right from OFB. But we have a start form, that does a lot of initializing for the app. If you try to start a form standalone, it will rain error messages. So you have to start the app by starting at that form.
How can you specify the output folder of Oracle Forms Builder?
How do you set up you development envirionment?
EDIT Our Version:
Forms [32 Bit] Version 10.1.2.0.2 (Production)
Oracle Toolkit Version 10.1.2.0.2 (Production)
PL/SQL Version 10.1.0.4.2 (Production)
Oracle Procedure Builder V10.1.2.0.2 - Production
PL/SQL Editor (c) WinMain Software (www.winmain.com), v1.0 (Production)
Oracle Query Builder 10.1.2.0.2 - Production
Oracle Virtual Graphics System Version 10.1.2.0.2 (Production)
Oracle Tools GUI Utilities Version 10.1.2.0.2 (Production)
Oracle Multimedia Version 10.1.2.0.2 (Production)
Oracle Tools Integration Version 10.1.2.0.2 (Production)
Oracle Tools Common Area Version 10.1.2.0.2
Oracle CORE 10.1.0.4.0 Production
Edited by: user5828099 on 08.01.2009 05:59

For building a complete application it could be quite useful to do a batch-compile of your forms and do not do a manual compilation using forms-builder.
You could have look at this Re: Migrating Forms 61 to 10g - Forms Builder Crashing

Similar Messages

Change form of output signal without initializing new process of output signal

Hello!
How to change form of output signal produced on the output channel without initializing new process of output signal?
Thanks
Message Edited by _Pavel_ on 10-28-2009 05:21 PM
Solved!
Go to Solution.

I'm working with LabView 8.5.1.
I have periodic TTL impulse with constant frequency – signal to start , which I'm used to start data acquisition (PCI-6251)and generation signal (PCI-6221).
When TTL signal a detection, necessary generation some analog signal (PCI-6221) and acquisition other analog signal (PCI-6251). Then wait following TTL signal.
At this moment I write the part of the program which is responsible for data acquisition. Function retriggering (In examples C:\ProgramFiles\National Instruments\LabVIEW8.5\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-CtrRetrigg Pulse Train Generation for AI Sample Clock.vi) is used. This function necessary,because we start data acquisition each time on arrival TTL impulse, andrepeated creation of the virtual channel of data acquisition with the newtrigger spend a lot of time.
The problem consists in the following. Generation of the data from other card should occur on the same impulse TTL as for the data acquisition card and then generation zero value.
How I can realize it? I planned to change the form of an impulse of generation when detected TTL an impulse, without reinitialize process.

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.h

I have 100 groups in planning for those 100 groups i want to build roles like interactive,view user,planner etc.for those how to change in export -import folder .xml file in that edit how to change user roles in that xml it will generate automatic id.how to do that in xml file ?

Thanks john for you are reply.
I had tried what you sad.I open shared service in that foundation project i had export shared service.after that in import-export file.In that role.csv,user.csv,group.csv.Like this file have.When i open user file added some users after i trying save in excel it shown messgse
I click yes and save the .csv file and import from share servie. i got error like this
am i doing right way john.or explain clearly

How to change form of discoverer portlet

Hi "All".
How to change form of discoverer portlet or create new in
discoverer/portletprovider.
I try to change discoverer portlet (hide refresh date, view worksheet link)
but nothing changed.
If You did it - write exemples xsl or xml files, please.
Or give a link.
What files i must edit for edit discoverer portlet.
Help me in it please.
Thank you.
sory for my english

worksheet_run.xsl
and after changed -> restart oc4j_forms and oc4j_portal.

Quotation(VA22) - How to change form - sap script or smartforms ?

Hallo,
as defaults, by VA22 I can print the quotation by sapscript.
I have to change form: I have to create a new smartforms instead sap script. in transaction V/30 I can set some parameters to change it.
My question is: Where is the correct parametrs to entry ?
(I entered the name of smartforms and a Z print program but I got an error message )
Any idea ?
Tks.

Hi,
I guess the terminology's causing some problems. Here's what I think you need to do;
In transaction V/30 select the Output Type then double-click on the folder 'Processing Routines'. The columns are as follows;
Medium - Print, email etc
Program - Name of the print program
FORM Routine - name of the subroutine in the print program that will be called
Form - Name of the SAPscript (if used)
PDF/Smartform Form - Name of the Smartform, or pdf form (if used)
Type - If a Smartform or pdf form is specified, select from this drop-down which type it is.
If you're getting an error when you enter your parameters, it would be useful if you told us what the error was.
Regards,
Nick

How to change icon of a Folder-track?

By Folder-track I mean the Folder in Arrange window that is created from "packing reions". Is that even possible in LogicPro7 - to change it's icon?
I mean I know how to change icons for my audio tracks, audio-instrument tracks. And it would be nice if I can assign different icons for different Folder-tracks.
I did not find how to do that

It is possible... use option-command-hold on the icon of the folder in a track in the arrange and up pops the many icons to choose from.
You can set the icon to something other than the folder.
To make different folders I guess you would have to do some image editing
and make your own icons but that is pretty easy.
Put your user create icons here...
~/Library/Application Support/Logic/Images/Icons
and logic will load your numbered image file instead of the default ones that
Logic would normaly use.
Note: 1.png is the file name of the regular folder icon.

How to change audio port output to input port on mac os x 10.9.2 to connect electric guitar on macbook pro for garageband

How to change audio port from output to input port so that i can connect my electric guitar to play along with garageband. I couldn't the option to change it in my system preferences of sound as my mac os x is 10.9.2. So please help me!!!!!!!!!!!! I want to play electric guitar with my garageband so badly!!! :O
Mac os x 10.9.2. ; Garageband 10.0.2

There is no audio line input on your Mac, get a USB interface, get one that is specified for guitars.

How to change iTunes default synchronization folder?

Because my disk C too small, I want to synchronize my iPad to another disk (for example D or E). How do I to change iTunes default synchronization folder?

FYI, when the camera is on you can tap the middle icon in the lower left corner of the screen to select the folder which files will be saved to.
Cheers!

How do I specify an output folder when exporting?

I am running Adobie Premiere Pro CS5.5.
I got to File -> Export -> Media. The "export settings" box appears.
I know how to set the settings for my desired export. The issue I'm having is under "summary" where the output is specified. Often, I find my video is being outputted to random and unwanted folders. My videos have ended up in folders buried deep in my hard drive where a few have been lost forever. How do I specify the output location so I can easily find my video in a place that I want and is convenient?
-- extremely frustrated.

How to change 5.1 output channels?

I have set the output channels of 5.1 surround in the AUDIO MIDI SETUP to physical outputs 5-10. Soundtrack PRO still uses its own selection/order of 5.1 outputs (ie 1-6). How can I use other outputs of my audio interface?
Tnx,
Kustav

Change the outputs? ... you can't .... STP ignores the AudioMidi setup output allocations and has no internal system for assigning channel outputs to hardware outputs ... how could this be? ... how could Apple violate its own CoreAudio principles ...
The only workaround I've found is to use Cycling74's Soundflower audio routing tool ... Google it ... it's still not Leopard native, tho I think some folk have had luck with it ...
Maybe Apple will get around to adding what is essentially "basic" routing features to the next update ...

How to change name on Home folder?

I have an Apple iBook PPC G4 1.33 GHz running Leopard OS X version 10.5.8 and with 1 GB Memory. I just purchased this machine, which is in excellent condition, but I have a problem. It is not earthshattering and doesn't threaten the life of the machine in any way, but it is my machine and I would like the Home directory to reflect that.
The name in the System Preferences for Administrator is "gdavies", which is myself, but the Home Folder in the Finder sidebar is named "macuser". I went in as root user and came close to complete disaster, but got out in time. Having me named as administrator in Accounts but not on the Home directory is unusual. If both were called "macuser" I believe I could fix it, but this requires a greater level of expertise than I have.
Any ideas how to make home folder read "gdavies"? I just bought this iBook and it came with the Home folder named as "macuser". I changed the computer's name in "Sharing" in system prefs and I believe I may have changed the name in the Accounts. I know I should not have done it that way, but it doesn't help changing it back.
When I open the Users folder in the Mac HD there are there folders, one called "gdavies" with 10 items, most empty, such as desktop, downloads and so on, though dropbox is there.
The next folder is the house icon for the Home directory named "macuser" with 38 items and is the working folder. Then there is a folder called "shared", which contains no items.
How do I change the Home directory name in the Finder window sidebar to "gdavies'?

Kappy, you are indeed working overtime to help me and I just want you to know how appreciative I am.
Now, I shall take your answer step by step.
1. Log into Accounts using the admin password for "macuser". That password and the "other" admin password for gadvies is one and the same. However, done.
2. Click on Login Options, done - verify gdavies has admin status - done - answer "yes, gadvies has admin status".
3. Turn off Auto login - done.
4. Logged out then logged into "gdavies".
5. Returned to Accounts pane authenticating with "gdavies" password - done. But remember that the admin password is one and the same for "macuser" and "gdavies". Now, I did *not* set it up like that. It just seemed to happen. do I :- ) or do I :- ( ???
6. Select "macuser" account and using Login options delete. Select the option to remove completely.
I am sorry Kappy, but this pesky "macuser" sits in the home directory without any account in Accounts. So there is no "macuser" account to delete.
I went through all the motions and I was sort of hoping that a "macuser" account would *appear* in the Accounts pane beneath the Guest account so that I could delete it, but no such luck. You know, sometimes things like that do happen.
Thanks a heap for the try, Kappy, I do appreciate you exercising on my behalf "those little grey cells" as Hercule Poirot would say - my favorite Private Eye (Agatha Christie).
Cheers, Gareth

HT4059 how to change form of payment on iBooks

When i try to get into IBooks, i get a message that says my "form of payment is not valid". This make sense because I changed credit cards recently. But i don't how to get in to change my form of payment. Can you help?

worksheet_run.xsl
and after changed -> restart oc4j_forms and oc4j_portal.

How to change location of files (folder structure to storing in iPhoto lib)

I need help.
I thought I was smart, but as is always the case, I find out that I am not
I did not trust iPhoto at first. So I retained my images in my 8 years of folder structure (by year and then subfolders of months).
My lib is getting large, 7000 plus images, and when importing images (I do not have the setting for imported images to be stored to iPhoto Lib) and wanting to delete some, I find it more work than is necessary.
Bottom line: Can someone tell me if there is a way to change the setting (of course there is) but also to reimport, or move, my images that are already in iPhoto (but are really just previews referencing to my folder structure) so that they will reside in the iPhoto Lib?
When I import it finds duplicates...if I say do not import then it does not go any further...but if I say "yes, import duplicates" then it brings them in as duplicates...which means I have two copies, but only one retains all of the keywords etc.
Another bottom line: I want to retain my keywords in my current library, but move all images into the iPhoto lib instead of my folder structure. I can do this from this date forward, but I want to get the entire lib to be this way.
Help?

read through this thread - it should help you
http://discussions.apple.com/thread.jspa?threadID=1125431&tstart=45
Larry Nebel

How to change encoding in output txt file

Hello All,
I use Oracle 10g, database characterset is UTF8. I've got a txt file with corresponding UTF8, could I change a characterset of the txt output file for the other one - ANSI, for example?
Thanks in advance for your help!
Best regards,
Tany

I haven't tried this .. but I think you can provide the encoding attribute to the xsl:output element. See the link for more details :
http://www.w3.org/TR/xslt#output
HTH
Rahul

How to change the "Current Destination Folder" to install iTunes

How can I change the Destination Drive during the installation of iTunes? The default is "C:" and it cannot be changed

Hi,
Check in OMSY Transaction that, Which current month and year is having your comapny code.
and go to T.Code MMPV
enter Next Month of that cureent period and Year
and Execute. You find the message that your current period has changed.
Do the same process month by month till reaches to current period and year.
Let me know if you have further queries.
Padma.

How to change Form Builders output folder

Similar Messages

Maybe you are looking for