How to change IP address and subnet mask without using the sys-unconfig ?

I have Solaris 10 x86. I've ran into problems using the sys-unconfig command
to change hostname and IP address.
How to I manually change the IP address and subnet mask values on Solaris 10 manually?
Thanks.

We just switched over a DNS server by using ifconfig, (same subnet), and killing named. seems to be working fine, anything I should look out for ?
steps:
Prep -
- change name in /etc/hostname.e1000g0
- change name and IP in /etc/hosts and /etc/nodename
- # uname -S dnsint02
Activate
- unplug old dnsint02
# ifconfig e1000g0 192.168.2.80
# kill -9 [PID of named]
Cleanup
- Remove old key on clients I SSH from.
- reconfigure backup software for new name/server combo.
Edited by: HarryC on Jun 25, 2009 9:29 AM

Similar Messages

Ipad is showing connected to wifi but it is saying its not connected to internet. I have reset all settings, tried to change IP address and subnet mask and nothing is working.

My ipad mini 3 is not showing that it is connected to the wifi, but it is saying it is not connected to the internet. I have reset network settings and then reset all settings and it has not worked. I have tried to change it to static and change the IP address and the subnet mask and that is not working either. I have also tried to use the wifi in different places and that doesn't work either. Please help!!!! iPad is useless without the internet.

1. Set router back to Auto DHCP.
2. Turn off router for 30 seconds and on again.
3. Re-boot iPad.

Select an area of sound track and delete it without using the razor?

Is there a way to select an area of sound track and delete it without using the razor please?
Like drag and then cmd-delete or clear or something would seem intuitive?
Thanks Steve z denver

Set In and Out Points to define the region, then use the Lift command (Sequence>Lift). Note that the Lift command functions based on track targetting, so if the Video track is also targetted, the content will be removed there, too.

How to configure the eth1 port of NIcRIO 9024 to another IP address and subnet mask

Hi ,
I am using cRIO 9024 and am planning to configure it to be an MMS server that interacts with a client which is in another network with different IP and subnetmask. I want to run the server VIs from the host computer via the eth0 port and want to communicate the MMS messages through the eth1 port. the eth0 port is configured as a static IP as shown in the screenshot attached and would like to assign a separate IP and subnet mask to the other port . But when I try to save the configuration I get the error "Could not save your changes tot he target.The subnet mask for eth1 is invalid" .
I have already directly cross connected the Crio and have disabled the firewalls and still am not able to configure it.
1) is it possible to configure the ethernet ports to have separate IPs corresponding to different networks and thus the subnet masks?
2) If its possible then what is the mistake i am doing while configuring it ?
I would be extremaly grateful to have a reply on this as its pretty desperate to spend a lot of time just to set up the IP configurations..!!!!!
Regards
Abhinav

Dear Abhinav,
I'm sorry but what you are tryining to do is not suported by the Second Ethrnet Port on any cRIO and so you getting this error meeage.
Here a abstract out ouf the KnowledgeBase How do I Configure the Dual Ethernet Ports on Real-Time Controllers?:
Ethernet port 2 is currently not supported to communicate outside its own subnet. There is no capability of configuring the Default Gateway for Ethernet port 2 and therefore cannot connect to a large isolated intranet. However, there appears to be a common misconception that this port can only be used for communication between NI products: this is not the case, though any communication through the secondary port must be within the same subnet.
Kind Regards,
SG3 | Applications Engineering | National Instruments | NIG |

Manipulating ip address and subnet mask with plsql

Hi,
I'm looking for a plsql package in order to perform basic operations with ip adresses and subnet masks like:
- validating an ip address (dot format)
- converting masks (16 -->> 255.255.0.0)
- splitting an ip range with a higher subnet mask (10.3.0.0/16 -->> 10.3.0.0/17, 10.3.128.0/17)
It's very difficult to find any information about this on google so if you know or had written such a package or function....

As using BITAND function
with two arguments IP_ADDRESS (transfer 32bits-integer) and
POWER(2,32)-POWER(2,32-MASKS),
you must be able to get ip range (32-bits-integer)
and a higher subnet mask by IP_RANGE+TRUNC(POWER(2,31-MASKS)).
And then you can transfer it to dot format (decimal,octal etc.) easily.

How to change IP address and hostname in solaris 9

Hi experts,
I want to change IP address and hostname of the server , Plese give steps, or any precise document .
Thanks
Mohan
Message was edited by:
mohan_sr

did you already change your ip and host?
if not, do the following instructions:
* verify your hostname
- uname -a
- cat /etc/nodename
both should show your hostname
* alter your hostname
- uname -S newname
* verify the hostname
- uname -a
- cat /etc/nodename
both should show your newname
* edit /etc/hostname.ce0 (type ce0 depends on your net device)
- echo 'newname' > /etc/hostname.ce0
* verify /etc/hostname.ce0
- cat /etc/hostname.ce0
should show your newname
* edit the following files
- /etc/net/ticlts/hosts
- /etc/net/ticots/hosts
- /etc/net/ticotsord/hosts
replace old with new hostname
* edit /etc/inet/hosts
replace ip and hostname
* you have to look for
- /etc/inet/networks
- /etc/inet/netmask
fit yout data
After doing all changes you have to reboot your system.
Use ipconfig to verify network data

I have some old cd's I have burned on itunes. How can I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe . Please be gentle.

I have some old cd's I have burned onto itunes. Howcan I copy them to my iphone without using the cloud? I donot want to mess with my cloud settings because I am a technophobe. Please be gentle

Willy, the procdedure you describe works perfectly for AppleTV G1. In fact, I frequently play DTS music discs ripped to my iTunes library as Apple Lossless (ALAC) and synched to the ATV. What happens is that, as far as iTunes and the ATV are concerned, a conventional stereo 16/44 audio file is being played; however my reciever detects the DTS data stream, and instead of outputting static, it decodes the 5.1 channels correctly. This process parallels the way DTS discs were designed to be played back: a conventional CD player is connceted, via digital out, to a DTS-aware reciever/pre-amp and the two channels of static are recognized as 6 channels of DTS-encoded audio.
However this process will only work if the player (CD, ATV, PC, etc.) sends a "bit-perfect" 16 bit/44.1 khz data stream to the decoding device. In the case of ATV G2 and G3, as has been discussed elsewhere, the unit resmaples all audio - including 16/44 PCM (Redbook CD) - to 16/48. While this is not a big deal for conventional audio CDs, MP3s, and AAC files, it mangles the fragile DTS datastream and renders it undecodable. The resulting static that you hear is just like the static you would hear if you played a DTS CD on a non-DTS capable system.
Sadly, I'm not aware of any easy way around this. You could use a program like Foobar (and the DTS plugin) to convert your DTS CDs to 6-ch .wav or .flac file. From there you could transcode the file to AC-3 and then mux it into a video container that ATV supports. You may need add a dummy video track, for iTunes/AppleTV to be ok with the file, though I'm not sure. This may be a lot of work.
Sorry for the bad news. I wish that the iTunes/ATV ecosystem had better multi-channel audio support.
Steven

Change IP-number and Subnet-mask with LabView?

To upgrade the software on a CRio-System, the user needs to change some settings in the TCP/IP-configuration.
To simplify this task I think on a possiblity to do (and at the end redo) the changes in the TCP/IP-Configuration of the Windows PC.
What I need is:
- Change the IP-Adress (from "Obtain IP adress automatic" to IP xyz...)
- Change subnet-mask
- Redo this settings by saving an existing config or set to "Obtain IP adress automatic"
Who knows if and how it's possible to do that in LabVIEW?
Perhaps I have to call a script /.bat-file?
LabVIEW 6,7 and 8 available :-)

Sreedhar T wrote:
Hi, its a really interesting stuff to read. Did anyone try doing it ?
One thing that I wanted to know was: How long does it take to do this ? Since Im using a time critical application, can this entire operation happen in 100 milli seconds ?
Will be glad to hear from you.
Regards
Sreedhar
I have used this for a program that needs to have a host IP address for High sped cameras. I have it change the IP address to the required address and change it back when I am done. Here is a very simple Labview version of this code with out the switch back.
Tim
Johnson Controls
Holland Michigan
Attachments:
TCPIP Config Programically.vi ‏10 KB

How to change iCloud accounts on an iPhone without erasing the data from the cloud?

Long story short I am using my sister's iPhone while mine is being repaired. My data from my iPhone is synced with my own iCloud account. My sister and my dad are on the same iCloud account, except I need to put my data on her phone, except it will not let me change the account on the iPhone without deleting my dad's iCloud account. How can I make this work?

Deleting the iCloud account on your phone only deletes it from your phone, not from iCloud. The account an it's data will not be touched, and your father's phone will not be effected by this. Just go to Settings>iCloud and tap Delete Account, then sign back in using your Account.

How do I add variables to different checkboxes without using the 'Export Value' and then add them together (if checked)?

Hello,
I am very new to JavaScript. I would like to create a checkbox with a numerical value variable activated if the box is checked. Unfortunately, I cannot use the 'Export Value' because I already need to use it for something else.
Any help is really appreciated.
Thanks,
Robyn

Brace yourself, here's your solution.
First of all, the export value of you checkboxes should definitly be the number of hours for the class since you will just add them up further.
Second, we will use the userName property for our second export value (its the field right under Name and its labeled "tooltip"). You will name the class there.
Finally, you need to name each checkbox with a number at the end starting with 1 all the way to 190. This will be used in loops. ("whatever.1", "whatever.2,....."whatever.190")
In the calculate event of "total hours":
var sum = 0; //declaring a variable that will be used in the loop
for (var i = 1; i <= 190; i++){    //this loop will scan through all your checkboxes
     if (this.getField("whatever."+i).isBoxChecked(0) == true){ //if box is checked....
          sum += Number(this.getField("whatever."+i).value);   //.....add its value to the sum
event.value = sum; //display the total
Now for the course name field, we will use the same pattern in the calculate event
var courseList = new Array(); //declaring an empty array that will contain the courses
for (var i = 1; i <= 190; i++){    //this loop will scan through all your checkboxes
     if (this.getField("whatever."+i).isBoxChecked(0) == true){ //if box is checked....
          courseList.push(this.getField("whatever."+i).userName);   //.....add its userName (tooltip) to the array
event.value = "You are attending these courses: "+courseList.join(", ")+"."; //display the array by turning it into a string and joining its items with ", "
You can try it out with just a few checkboxes at first. Don't forget that the loop mustn't go further than the existing field or you will get an error and the script will stop. Make sure no error show in the console (ctrl+J).

How can i turn off Find My iPad without using the iPad?

My swipe screen has stopped working completely on my iPad. Very disappointing as it is only 18 months old and has been well looked after! I have tried holding down the off/on button and menu button to reboot but this doesn't work. I have now logged the fault with Apple and have an appointment to see someone in the support team this Monday. However, I wanted to try one more thing. I want to restore to factory settings as I've read that this could resolve the problem. When I plug it in to iTunes and try to restore iPad i get a warning message telling me I need to go to iCloud settings on my iPad and turn off Find My iPad before restoring. As I cannot use the iPad I cant do it from there. Is there another way? Please help me, I want to weep!

FORCE IPAD INTO RECOVERY MODE (this will disable Find My iPhone)
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

How to select rows or columns of tables without using the mouse?

2nd post ever! Yeah! \m/
In Excel, I can select entire rows or columns of data WITHIN TABLES--i.e., not selecting entire sheet rows or columns--by going to any cell on the perimeter of the table, holding down shift+ctrl, and clicking a direction arrow. So for example, if I have a table in columns D-G and rows 1-5, I can highlight row 4 by going to the first or last cell of that row, holding down the shift+ctrl, and hitting the appropriate direction arrow. You might think this is superfluous given that you can use the mouse to select cells. But that becomes cumbersome with large tables, and this method can be more efficient even with small tables.
Similarly, it's often useful to navigate tables, particularly large ones, by moving from any cell within the table to the end or beginning of that row or column by holding down ctrl and hitting the appropriate arrow key. In Excel, this ctrl+arrow key method also allows you to skip blank cells, which is another very useful navigational feature.
I tried numerous combos involving shift, ctrl, command, alt/option and the arrow keys. Haven't found a way to do any of this yet.
Anyone?

Hi Josh,
Numbers is organized differently than Excel, and the navigation tools are different too. Many of us miss our particular favorites from spreadsheets past, but this is Numbers, not a clone. The biggest adjustment is to go from huge monolithic sheet-tables containing virtual sub-tables to a simple blank sheet with small tables, sometimes many per sheet. Navigating is no big deal in these small tables and neither is getting from one small table to another, using the Sheets pane.
Selecting a particular Table is as easy as clicking on the table's name in the Sheets pane. Selecting a particular row, or column, or ranges of rows or columns is done by clicking on the table's row and column labels, left side and top side once a cell is selected in the table.
Numbers is weak at handling large Tables and documents that are large overall. We know this and many of us still prefer it to the alternative when the tool fits the task.
Jerry

I recently changed email addresses and updated my info in the ID and ICloud but when I go to download an app my old email comes up. I no longer remember the password associated with that account an I no longer have access to it. What do I do?

I recently changed my email on my apple id and in ICould but every time I try to download an app my I'm email apple id pops up. I no longer have this email account and do not remember the password associated with it. What do I do?

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
Apple ID FAQs > http://support.apple.com/kb/HT5622
Willow37 wrote:
I no longer have this email account and do not remember the password associated with it. What do I do?
If necessary...
See Here > Apple ID: Contacting Apple for help with Apple ID account security
Ask to speak with the Account Security Team...

The upgrade to Firefox 4 is causing massive problems with my computer. How do I uninstall it and go back to using the previous version?

Firefox 4 is absolutely awful - it is causing massive problems with my computer. How do I uninstall Firefox 4 and go back to the previous version of Firefox?

According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.

How do I sync iPhone and Mac contacts (without using icloud)?

Hi,
The option to directly sync my iphone contacts with my Mac's seem to have disappeared from iTunes. Given that I haven't (and don't want to) upload my contacts to apple's icloud servers, how can I do a simple synchronization?
Thanks,
MIke

I believe it is. I'm not a Mac user, but if you were to search the forum, there have been a number of threads regarding Mavericks and syncing, so a search of those terms will more than likely yield results that discuss the server information. I remember reading information, but since it did not pertain to me, I did not retain enough.

How to change IP address and subnet mask without using the sys-unconfig ?

Similar Messages

Maybe you are looking for