How to change margins when printing in landscape

Hi all,
I have a network printer installed on Solaris 6. To get it to print in "landscape" i added a filter - like this:
Input types: any
Output types: landscape
Printer types: any
Printers: any
Filter type: slow
Command: /etc/lp/landscape.sh
The script: landscape.sh:
echo "^[&l1O"
cat -
echo "^[&l0O"
When i print like this: lp -dprinter -olandscape filename it print�s in landscape. Problem is i can�t set up any margins.
Printer is configurated like this:
Banner: on:Always
Content types: landscape
Device: /dev/null
Interface: /etc/lp/test
Printer type: unknown
Modules:
Options:
I tried to modify it�s interface file, but that had no effect. Here are the line i tried to modify
# PC-850, 12 cpi, 12 pkt, normal Courier, 6 col. Left Marg., 2 lin. TopMarg.
echo '\033(0N\033(s0p12.00h12.00v0s0b3T\033&a6L\033&2E\c'
How can i change the margins ?
Thank u all
Thomas

It sounds like either the font is corrupted or your AddressBook prefs are whacked.
You can check the font in FontBook > File> Validate Fonts, or in /Users/yourname/Library/Preferences/com.apple.AddressBook.plist move it to the desktop and restart.
-mj

Similar Messages

Cannot change the print margins when printing out my spreadsheet. Tried clicking on format and then Document but when I enter a number I always get " invalid number".

I cannot change the margins when printing out my spreadsheet. I clicked on the format then on document and got a entry box. But everytime I try entering a number to change the left margin ( tried .5 ) I get an " invalid number " response. I can print out the spreadsheet but always get a message telling me the margins may be too small and data may be clipped. Data doesn't get clipped but left part of the spreadsheet is right at the left side of the paper. Want to change the margin so I don't get that message.

Naming the spreadsheet app would do wonders for getting an answer.

How to change margin value in mode booklet printing Adobe Reader X ?

How to change margin value in mode booklet printing Adobe Reader X ?

Is this a form you created in Acrobat or is it a form that you're using with Reader? If the latter, there's nothing you can do if the field has been set up to format the field with a £ for the currency symbol.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
Check your printer's page settings.

Change margins on print preview screen from metric (millimeters) to inches

I need to adjust the margins when printing a page from the web. The print runs off the bottom of the page. When checking in print preview, the margins are in millimeters. Would like to change that to inches (which i am more familiar with). Where can i change the settings from metric to inches.

{ Ctrl + P } then Properties = do you have '''letter''' size paper selected or '''A4''' size? <br />
A4 is a bit longer than Letter size paper.
From what I have seen on my PC's, you get millimeters with metric size paper and fractional measurements with US paper sizes.

Microsoft word is not responding. I get this message every time I want to close Word or do some other functions such as change margins or print. I'm using OSX on a imac. What do to?

Microsoft word is not responding. I get this message every time I try to close a Word document or do some other functions such as change margins or print. I just get the twirling ball. I'm using OSX on a imac. What do to?

Bummer! The only way I have ever been able to get rid of the dreaded twirling ball was to reboot....with the exception of one time only, when it actually was some super techie issue that was only resolved when they looked at it and did their magic.
Sorry I couldn't be of more help!

I am trying to brint a brochure from my iPad from the Pages app. I want it to be landscape but I cannot find how to change it from portrait to landscape. Can anyone help me with this?

I am trying to airprint a brochure from my iPad from the Pages app. I need it to be landscape but I cannot find how to change it from portrait to landscape. Can anyone help me with this?

I think you have to sign into your Amazon Kindle Account, find the book in your archive and delete it there. Otherwise you can delete it from the device and leave it in the archive, should you want to look at it again.

A way to reduce margins when printing multiple pages per sheet?

I really like the new leopard print dialog box. Is there a way of reducing the large margins when printing 2, 4, or more pages per sheet (in Layout)?

You could use custom page sizes (in the Page Setup dialog) or you could see if the settings in the Paper Handling panel help at all.

Hi,sorry for my english.My question is how to change country when i have credit in my account.My account is US and i've 0.5 USD.Now,one frind from Canado bought some credit cards and i can't recharge my account.Tank you for helping me.

Hi,sorry for my english.My question is how to change country when i have credit in my account.My account is US and i've 0.5 USD.Now,one frind from Canado bought some credit cards and i can't recharge my account.Tank you for helping me.

BellaMichelle wrote:
For some reason, I have had misgivings about partioning my internal HD.. not sure why.. sort of feels like I'm creating my own computer sybil ;-) Truthfully, it seems weird to split it.. I don't think I can articulate it really.. but are there complications that can come with doing this?
It's a common way to run multiple OSs, if there's room. I've had two on my internal HD for a couple of years. Plus a small partition for a copy of my Snow Leopard Install disc. Just be sure to leave at least 10% to 15% free on each partition.
Running Lion on a partition of the disk that also contains your backups is not a good idea; if that drive fails, you risk losing both copies of your stuff!
OSX will also run somewhat more slowly, because access to an external is slower. That probably won't be very significant, though.
Also, would the decision be effected by how long I want to maintain the SL section? I am assuming once I sort out what to replace Quicken with, I won't want to keep the SL section. So would it be easy enough to 'clear out the SL data, and open the partition?
Review #3 in Formatting, Partitioning, Verifying, and Repairing Disks.
All things considered, your best bet may be to "clone" your SL partition to the second one, then (once you're sure everything is cool), erase the original (top) SL partition. You can use the Restore tab of Disk Utility for that (#7 in the same link), or a "cloning" app such as CarbonCopyCloner or SuperDuper. Then install Lion on the top partition.
When you're done with SL, just delete it's partition and expand the Lion partition down into the vacated space.

Howto change left/right margin when print

In a report we defined a left margin of 2 cm and a right margin of 1 cm.
When printing the report simplex everything is ok.
But when printing the report duplex we want to change the margins. Odd pages should print "normal" - but the page on the back, i.e. even pages, should then be "moved" to the left. That means the left margin has to be 1 cm and the right margin 2 cm.
How can we achieve this behavior?

Hi Rainer
For information on settings for Duplex printing please refer to the below link:
[link|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40e40899-721e-2b10-b084-c7ed76af46f1]
Hope this helps!!
Regards
Sourashree

HT3771 How do I adjust print margins when printing from Safari?

When I try to print email from Safari, my messages go all the way to the edge of the paper and get cut off. I can't find any page set up adjustments for margins when in Safari, like I can in other software (Word, Excel, etc.). All I can find are page size, orientation, etc.

Welcome to Apple Support Communities. We're all users here.
Let me hazard a wild guess that you're using Outlook, formerly Hotmail, for email in your web browser.
When the forced 'downgrade' from Hotmail to Outlook occurred, they decided to hide some frequently used commands and made simple message printing from a browser print command nearly impossible, at least for Mac users.
The trick is to use the Print command now hidden within the Outlook menu bar.
It's in the "..." section of the Outlook top menu bar following Categories along with "Mark Read, Mark Unread, Flag, Unflag, and View Message Source".
Select Print from there, it will open a new Outlook Print Message window. You should once again be able to print emails in their entirety.

How to change margins

When trying to print from Address book, in List with Name, phone and email
the some of the email address take two lines
Like
Home
[email protected]
t
Is there a way to change the margins to get it all on one line
Thanks Mike

lamarche,
The only things I think you could do is 1. remove some of the included information 2. print in Landscape. And with that You could just include a small amount of information on the portrait version and the have a more detailed landscape version as well.
Also 3. if you have iWork you could set it up in there anyway you would like it.
Hope that helps,
Weston

Extra margins when printing double sided

I'm using Word 2007 and have created recipe cards using a basic recipe templete in Word. I have the top margin set to .25 and I'm printing on a regular 8x11 piece of card stock (I want to simply cut the sides and bottom down to make a 4x6 index card).
However, the margin is printing at almost .75 when I print double sided. Any help would greatly appreciated! I've been working on this problem for two days and I bought the printer to print both sides.
Thanks!

Did you ever figure this out? Because my C309g changes my margins when I print double sided, and I can't find any info on it anywhere...!

Windows 8.1 pro client on a Windows server 2012 R2 Essentials domain, how to change lock when idle?

Hi,
I need to find out how to do something?
I have Windows 8.1 pro running on my PC and its part of a domain which is Windows Server 2012 R2 Essentials, it all runs perfectly except for a little niggle where my Win 8.1 PC locks after its not used for a short time. What I want to find out is
how to change this so it no longer locks when idle? I know this is a security feature but as its just my home pc it can be very annoying to log in again after walking away from the PC for a few min's.
I've had a look through the default domain policy but there are so many settings that I can't find it, that's even if there is a setting there?
Anyway can anyone help?
Thanks
JK
JK MCP

Hi,
We can try to implement by use High performance power plan or GPO to prevent computer from locking down:
Refer to the solution here:
http://social.technet.microsoft.com/Forums/en-US/0863112d-ee54-4808-9d27-0380d7bf04b0/gpo-to-disable-lock-computer-?forum=winserverGP
Also, you can check if there is any task scheduled for idle:
Task Conditions
http://technet.microsoft.com/en-us/library/cc721902.aspx
Hope these could be helpful.
Kate Li
TechNet Community Support

How to change ringtone when connected via bluetooth

When the Z3C is paired via bluetooth with my car audio system, the Z3C playes a different ringtone then the one which I have set as default.
How can I change (set) the ringtone when the Z3C is connected in my car?

I'm not to sure but I would imagine it has something to do with Smart connect and how it's setup when paired
For a successful technology, reality must take precedence over public relations, for Nature cannot be fooled. Richard P. Feynman

How to change margins when printing in landscape

Similar Messages

Maybe you are looking for