How to change memory
how do i change the memory/ram in my macbook pro and what brand would you buy
Instructions are in the manual that came with your computer...you did read it, correct?
Crucial or OWC are two good places to look. OWC has videos/tools:
http://www.macsales.com/
Similar Messages
-
[E6] USB Mass Storage - how to change 'memory in u...
Hi,
When I plug in my e6 into USB slot in my car and choose Mass Storage in E6 USB settings, my phone connect using phone memory...
I place music on memory card (micro SD) and don't know how to change the memory in use via mass storage USB connect.
On the other way, when I plug in E6 into LCD-TV, after hundred of reconnect, it plug in as Mass Storage SD card... And still don't know how it works :X
Help.Yes as Tom stated this post belongs in the FCP forum.
This can be configured in the System Settings.
Go to Final Cut Pro > System Settings... and click the memory tab, you can configure your RAM settings there.
-benny -
How to change Memory? I only have 16 RAM and it is insufficient.
With After Effects 5.5 and only 16 RAM, 64 bit, WIN7
I run out of memory. How can I deal with this?
How can I razor a sequence so it is smaller and uses less memory?
How can I manage my 16 RAM on my 64 bit quad PC WIN7 so I do not run out of memory using AF 5.5?Many thanks Andrew. When using Warp Stabilizer, and it is analyzing the background,it stops, after 20 minutes or so, and says "Insufficient Memory." Maybe the sequence is too long... about ten minutes.So how can I shorten the sequence or manage my RAM better, please? Cheers, Michael
[Message edited by Andrew Yoole - truncated unrequired content.] -
How to change memory (-Xms, etc.) without configtool
Does anyone know what property file to modify to set VM parameters for the AS in NetWeaver?
I don't want to use the configtool. I want to modify the files that configtool modifies.Hi Farokh,
If you are using SAP Netweaver J2EE Server, that means > 6.20, you have to use AFAIK the Configtool because all the settings are saved in the Database and the config files are created at startup.
Regards
Gregor -
How to change heap memory size for general java applications (not applets)
Hi. I made a java class which manipulates images and I sometimes get an out of memory error when the files are large. In these cases I can run it successfully from the command line using:
java -Xms32m -Xmx128m myappbut as I run this class from a firefox extension, I can't use this technique.
Could some one tell me how to set this globally? I've found a lot of info on setting it for applets in the control panel but that's it. I also tried editing my deployment.properties file by adding:
deployment.javapi.jre.1.6.0_11-b03.args=-Xmx128mbut none of these options seem to work.
Thanks for any help.Also you can use use [JAVA_TOOL_OPTIONS|http://java.sun.com/j2se/1.5.0/docs/guide/jvmti/jvmti.html#tooloptions], with more documentation here. JAVA_TOOLS_OPTIONS is available since 1.5. There is no direct documentation on [_JAVA_OPTIONS|http://java.sun.com/j2se/1.5.0/docs/guide/2d/flags.html] but was made available since at least 1.3.
The recent existing forum thread [Java Programming - How to change the default memory limits for java.|http://forums.sun.com/thread.jspa?threadID=5368323&messageID=10615245&start=36] has a long discussion on the issue.
You specified you are not using applets, but if you do, I would also suggest you use the next Generation Plug-in (since 1.6.0_10) that allows you specify the max memory in the applet without having to instruct the user how to make the change. See [JAVA_ARGUMENTS|https://jdk6.dev.java.net/plugin2/#JAVA_ARGUMENTS] for applets. Java Webstart uses resources. -
Hi all:
We have EP 7 running on Aix.Hi all:
We have EP7 running on Aix system.
I check in netweaver adminisator - System Management - Monitoring - Java System Reports . I found the Resource Consumption is
3:09 PM
AllocatedMemory MB MB 2048.0 2048.0
AvailableMemory MB MB 2048.0 2048.0
UsedMemory MB MB 1252.0 1255.0
However, my AIX server physical memory is 10G and only EP is running on it.
I check the JVM parameters in System Information, I found
java.max.heap.size 1024
-Djava.security.policy=./java.policy -Djava.security.egd=file:/dev/urandom -Dorg.omg.CORBA.ORBClass=com.sap.engine.system.ORBProxy -Dorg.omg.CORBA.ORBSingletonClass=com.sap.engine.system.ORBSingletonProxy -Djavax.rmi.CORBA.PortableRemoteObjectClass=com.sap.engine.system.PortableRemoteObjectProxy -Dorg.xml.sax.driver=com.sap.engine.lib.xml.parser.SAXParser -Djco.jarm=1 -Xms1024m -verbose:gc
-Dmemory.manager 2048M
-Xgcpolicy:gencon
-Xj9
-Xjit:disableTailRecursion
-Xmn1000M
-Xms2048M
-Xmx2048M
My questions is :
1. is 2G memeory settings suitable for my 10G memory server ?
2. How to change this 2G memeory settings to bigger size ?
Thanks a lot. -
How to change the title of an object in the build order window?
In Keynote '09 v5.1.1 (1034)... How to change the title of an object in the build order window from the default "dropped image" to a specific title?
I'm running the following:
Model Name: MacBook Pro
Model Identifier: MacBookPro2,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.33 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 667 MHz
Boot ROM Version: MBP21.00A5.B08
SMC Version (system): 1.14f5Custom names can't be applied to objects in the build list.
They are labeled as either; text, shape, table, chart or the filename of an image -
How can I tell what video card and how much video memory does my iMac have?
How or where can I find out: which video card does my iMac have and how much video memory does it have? I've tried looking in System profiler, but I did not see it there. Thank you.
Once you open System Profiler there should be a line called "memory" which is the RAM (vs. hard drive size which is not what is called memory), e.g., Memory: 1.5 GB
For video click on the line Graphics/Displays and look at the chipset line, e.g., Chipset Model: GeForce2 TwinView
Kappy's instructions are handy for checking the original configuration of your computer, but that may have been changed at some time, especially if you bought it secondhand. -
How to Change the Garbage Collection Algorithm in WLS 9..2
Hi All
I am trying to find out the way to configure the GC algorithm in weblogic 9.2 to type bea.Jmapi.GarbageCollector@.
By default it is showing ‘Nursery, parallel mark, parallel sweep’ . We were trying to change it to generational (two-spaced) with a parallel mark algorithm and a concurrent sweep algorithm or bea.Jmapi.GarbageCollector .
To change the same I modified the memory argument in commenv.cmd to set MEM_ARGS=-Xms128m -Xmx256m -XXsetGC:genparcon
Still Garbage Collection Statistics section in web logic console shows the same default value.
Could anyone tell me if I am missing something?
thanks in advanceThere is nothing is WebLogic that will define the JVM GC algorithm, that is up to the JVM settings that are normally configured using params in the start scripts.
If you are using JRockit, you can ask in the forums but the JVM documentation should really be sufficient.
JRockit
Same thing for the Sun JVM, there is lots of information out there on how to change the GC algorithm.
The thing that is nice about JRockit is that you can use the Mission Control tooling to take recordings, look at the GC's and make adjustments easily. Sun has some tooling as well with jvmstat (and visualgc), but I'm not as familiar with it.
http://java.sun.com/performance/jvmstat/
Both of those tools would be much preferred to printing the GC info to a file and trying to parse it in my opinion. -
How to change remember bank password?
How to change remember bank password to no!
The Keychain Access utility lets you remove many web remembered passwords and its in your Applications -> Utilities folder.
If you don't see your bank there, your browser's Cookie manager in its preferences can have the cookies for your bank removed, which usually resets the memory of having your password stored. -
Zen V Plus - how to change quality in video convert
Hi there,
I?ve just bought the ZEN V Plus MP3 player and I?m very disappointed with the Video Convertor. I would love to watch video files on my ZEN, but, when I want to copy file to memory, I have to convert it with that program, but, it'ss impossible to change the quality, so after the conversion I don?t have a video, that has 40MB, but 500!!! Does anyone know how to change the quality? or better - are there any alternati've programs, which can convert video files to be compatible with my ZEN V Plus?
Thankes a lot, have fun
ToMgooggle up super video converter and convert your videos
choose the following settings
Output container: AVI
Output Video Encoder: Xvid or DivX
Output Audio Codec: MP3
Video: no change (resolution
frame/sec 25
bitrate 768
options high quality/48k audio
Audio: Sampling Freq 4400, channels 2, Bitrate kbps 28
it should look pretty good, what kind of videos? i.e. google, youtube? -
How to change SGA and PGA in 10g r2 RAC
Hi,
How to change SGA and PGA in 10g r2 RAC, its Linux.Hi,
Here is the way i followed to change SGA and PGA in RAC.
Action Plan to change the memory parameter in the production environment(5/21/2010)
Note:
=====
Practice should be done in the DEV/TST environment before moving to Production;
Although the procedure could be applied in the testing environment the changing values
used in the testing environment should be modified since RAM number are not the
same between the testing servers and production servers.
1. Make changes to these two parameters in one of
the prod instance, e.g. PROD1
====================================================
login as sysdba on sqlplus
Change :
alter system set sga_target=28G scope=spfile sid='*';
Change :
alter system set pga_aggregate_target=4G scope =spfile sid='*';
sql>alter system set pga_aggregate_target=4G scope=both;
sql>show parameter pga_aggregate_target;
-- should see the altered number on both instances
Change:
sql>alter system set sga_max_size=28G scope=spfile sid='*';
sql>alter system set sga_max_size=28G scope=spfile ;
sql>alter system set sga_target=28G scope=spfile;
3. shutdown database PROD (two instances should be shut down)
$>srvctl stop database -d PROD
$>. /$ORA_CRS_HOME/bin/crs_stat -- to check for the database status
4. bring up database PROD (two instance should be brought up)
$>srvctl START database -d PROD
$>. /$ORA_CRS_HOME/bin/crs_stat -- to check for the database status
login into both instances as sysdba to check
sql>show parameter pga_aggregate_target
sql>show parameter sga_max_size
-- should see the altered number still there in both instances
-- from step 1
-- After confirming above two parameters are altered on both instances,
-- then issue the syntax below in one instance
5) check everything is ok -
Benefits - How to change work area?
Hello!
I'm opening an IMG path for benefits. I currently have 2 benefit areas defined in the system (1 is newly created).
The thing is, everytime I click on a subpath, e.g. Define First Program Grouping or Define Second Program Grouping under IMG: PM -> Benefits -> Flexible Admins -> Programs, it always show this message "You are currently working in benefit area XX".
My question is: How to change the work area to another Benefit Area?
Thanks in advance!
Edited by: Yuki C on Aug 15, 2011 2:11 PM
Edited by: Yuki C on Aug 15, 2011 2:11 PMProblem solved.
Seems like it is reading from memory.
So i just go to some other view where I can select a Benefit Area upon working on it.
So when I go back to the path that I want to work on, now the work area is under the Benefit Area that I want . -
Active standby how to change?? + 32gb N96?
Hello, i have opted for the navigation bar that goes down the left hand side fo the screen for the standby apps, rather than basic or horizontal..... how do i change the ones it gives me
currently it has what looks like a diamond which is fine, but then it has calender, music, personalisation.... is there a way to change these??
Plus is there a 32gb n96 planned does anyone know... i heard there was.... I'll be cheesed off if there is, but delighted at the same time! :-)Ok to change the applications in quick launch (i.e. the diamond):
RTM
Settings-> General -> Personalization -> Standby Mode -> Shortcuts
I don't know how to change the others.
About 32 GB N96 not sure what you mean.
You can buy a 16 GB memory card already today and that will bring your total memory to 32 GB.
640K Should be enough for everybody
El_Loco Nokia Video Blog -
How to change parameters values
dear gurus,
can someone guide how to change below values and apply and what steps should taken and changes do in files
* Shared_pool_size = 450M
* Db_cache_size = 750M
* Pga_aggregate_target = 125M
* Sort_area_size = 1M
* Open_cursors = 4000
* Processes = 300
regardsHi If you have set SGA_TARGET and PGA_TARGET , then you dont have to wory for the individual components.Oracle internally handle it .
You can get the information for each components using below sql
sql> select * from V$SGA_DYNAMIC_COMPONENTS;
If you want to find the optimize size of few of above components , take AWR report(by running script @?/rdbms/admin/awrrpt.sql). At below of report you will see SGA Memory Summary,Shared Pool Advisory,SGA Target Advisory,Java Pool Advisory,PGA Memory Advisory . So accordingly you can reset above mention parameters. This will put lower limit for these parameters
Edited by: amitbansode on Sep 9, 2009 5:07 AM
Edited by: amitbansode on Sep 9, 2009 5:08 AM
Maybe you are looking for
-
Tip: Unable to Install or Update Apps Using the iPhone's App Store?
I had a problem today where I found myself unable to install updates, or install new or previously purchased apps using the App Store on the iPhone. However, I had no problem with the installation of apps when I plugged my iPhone into my computer, op
-
SMS outgoing messages not showing in messaging apps since kitkat
Since the upgrade, when I use the integrated Voice Mate or Google Search to create an SMS, it successfully sends it, but the outgoing text does not show in the SMS app. I've tried the stock SMS and other 3rd party apps, with the same results. Howev
-
Differnece between Oracle BPM and Aqua Logic BPM
Hi, Iam just started readign about Oracle BPM , could anyone answer is there nay difference beteen Orcale BPM and Aqualogic BPM. I am working on other BPM technology ,I am analyzing other BPM tools to get the key differentiators among them. Please br
-
Copy/paste shapes from Illustrator also brings in a black background. Why?
When you copy/paste a shape from Illustrator into Muse, it also brings in a black background. Why does this happen and how do we delete it? Thanks!
-
DYNPRO_SEND_IN_BACKGROUND in XD02 (IDoc)
Hi everyone, I have an IDoc that extends and existing customer to another company codes. It is performing this task with transaction XD02. Sometimes it works fine, but usually it ends with the following error: Runtime error DYNPRO_SEND_IN_BACKGROUND