How to change mode of SDM server in CE7.1 ?

Hi All,
I want to change the mode of SDM server from 'standalone' to 'integrated'.
So i looked for "/usr/sap/<SID>/<INSTANCE_NAME>/SDM/" directory according
to :
http://help.sap.com/saphelp_nw04s/helpdata/en/4e/67118041b142f8a6b4d5bf8ca56422/frameset.htm
But surprisingly there is no 'SDM' folder available at the given location.Can anybody tell me how to change SDM mode in CE7.1 ?
Thanks and Regards
Ashis

Hi Ashish,
the SDM tool has been discontinued as of SAP NetWeaver CE 7.1. The new tool for deployment is integrated is called Deploy View and it's completely integrated in the SAP NetWeaver Developer Studio.
Check <a href="http://help.sap.com/saphelp_nwce10/helpdata/en/3c/52413e7bcd561ee10000000a114084/frameset.htm">this</a> piece of documentation for more information. There, you'll also see alternative options for deployment - to integrate third-party, JSR 88-compliant deployment tools, or using scripts.
Hope that helps!

Similar Messages

How to change language of the server monitor ?

hi all,
How to change language of the server monitor ? i got it in japanese and would like to turn it into English.
Thx for your help,

We use japanese strings only when your server locale has "jp": FindNoCase("Japan", GetLocale()) NEQ 0. So you may not be able to individually change server monitor's flash client, but there are two ways to change it back to english on server level
1) Check your server locale and change it to anything but japanese.
2) Rename smresource_en.xml to smresource_jp.xml in CFIDE\administrator\monitor (take a back up).
Thanks,
Chandan Kumar

Z table is not opening in change mode in production server.

Hi,
In development I have created BDC for Tcode SE11 for z table.
So in that BDC i have recorded like --
SE11->Utilities->Table contentes----> Create entries.
this is working fine in devlopment but this BDC is not working in Production server.
For that i have open the production in change mode and upload the bdc and again i have to close the production server.And this is very hectic work.
My problem is how to open that Z table in change mode to upload the data in production server.
Thanks & Regards,
Sanket.
Edited by: Sanket Mahajan on Aug 12, 2008 8:06 AM

Hi Saket,
I think the USER ID by which you are logging in the production server will not have authorizations to do changes in production server.
The options you have:
1. You can ask the Basis consultants to give you authorizations of change mode in SE11 transaction.
2. You can write a program which will insert data into ZTABLE using statement INSERT.
3. You can create a Table maintenance of the ZTABLE and add records using it.
best options :
2nd Option is the best option for Mass Data Upload.
3rd option is best if you need to add data in regular interval of time or you need to give this authorizations to end user to add records.
Regards,
Vamsi

How to change backend databases sql server 2008 R2 to Sql server 2012 datacenter

Hi
i have current sharepoint 2010 form has backend database is sql server 2008 R2 on windows server 2008 R2 Enterprise
and this form has
1 application server
1 Search server (index server)
1 wfe server ( all web applications are running)
1 databse server
here how i change this form back end to new windows server 2012 and sql server 2012 datacenter
adil

Information on SQL Aliases (using cliconfg.exe):
http://sqlandme.com/2011/05/05/create-sql-server-alias-cliconfg-exe/
You need to migrate content back into the database prior to migration:
http://technet.microsoft.com/en-us/library/ff628255(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff628257(v=office.14).aspx
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

How to change port for discoverer server

Hi All,
Current default port is 7777 for discoverer server.
how to change the port number ?
Thank you.

[Disco Configuration Guide|http://download.oracle.com/docs/html/B13918_03/maint.htm#i1035783]
Hi,
I would recommend using the Oracle Business Intelligence Discoverer Configuration Guide appropriate for your implementation (e.g. for Oracle BI Discoverer 10g Release 2 for SPARC, click on the link above). Here is what the documentation says:
To change the port on which Discoverer is deployed:
-Start Oracle Application Server Control and display the System Components page (for more information, see Section 5.1.2, "How to start Application Server Control and display the System Components page").
Display the Ports tab
-In the rows containing the Oracle HTTP Server component (Type=Listen), select the edit icon in the Configure column to display the Server Properties page for that component.
-Scroll down to the Listening Addresses and Ports area and change the port number in the Default Port field.
-Click OK.
-When you are prompted to restart the Oracle HTTP Server, click Yes.
For more information about the Server Properties page in Application Server Control, see Application Server Control Help.
Hint: If you change a Discoverer port number, make sure that any other OracleAS components that use that Discoverer port number are synchronized.
I have not needed to do this, so I can not speak from experience. As always, try this in a test environment first.
Patrick
Edited by: Patrick Bacon on Dec 8, 2009 5:31 AM

How to change the default mail server??? Please help.

I need to change the default mail server to my yahoo account. When I had my PC this was easy but I cannot figgure it out on the MAC. I am in China and I need to inform my insurance company of some information or they are going to cancel a policy. When I go to their site for email contact what pops up is the apple email, which I do not have an account for and ofcourse does not work. Their email address does not show and I cannot find it anywhere so I need to change the default to my yahoo account. On my PC this was easy and when I went to a site that had a contact but no email address, my yahoo account would come up. I hope I am explaining this correctly. I really need to do this fast as the letter I got took some time to get here and I just returned from some field work so I have about 2 or 3 days to get the information to them. Thank you.

John,
This does not demonstrate anything for me, since it brings up a Compose window for Mail, with my preferred account as the From address. This happens whether I access with Safari, or with Firefox.
The point that I am trying to make, is that in OSX, there is no way to have web mail access become the default mail method -- it only works with a true mail client, for POP, IMAP or .mac access on your Desktop.
If you have the type of yahoo account that can be setup for POP access with Mail, then when you click, you can choose your yahoo address as the From address to send from.
Of course you can insert the address in a new message with your Yahoo web mail, but I have understood you to want to have the message start containing the info from one of the pages on the site?
See the discussion at the following link, for setting up a Yahoo account in Mail:
http://discussions.apple.com/thread.jspa?messageID=2760483&#2760483
Ernie

How to change my software update server?

I have recently bought a used Macbook Pro. I want to update the software, but it keeps showing:
"The Software Update Server (omega.ayna.com.lb) is not responding. Check to make sure your network connection is operating normally. If there are no issues with your connection, contact your network administrator for assistance."
I'm an Apple newbie, so I need steps and help please.
Thank you in advance.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received those media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you may not be able to reinstall 10.6 even from the original discs, and Internet Recovery may not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

How to change the ROLE: Integration server in business system in SLD

Hi,
I am facing error in communication, becuase the integration server has been attached to in correct business system with incorrect client (001 instead of 700).
In SLD, business system, 'integration' tab there is button "Associate with XI'.
I have selected the role as integration server for the corrrect business system and aslo gave the correct pipeline url for integration server.
When I press the button "Associate with XI" and Save nothing happened.
How do i change my integration server.
Please help.
Regards,
Rehan

Hi Gaurav,
I have checked the teachnical system and its of type WEB AS ABAP. and when i click on the business systems tab, there are two business systems. When i double click on the business systems
I realised that both the business systems has been defined with role: integration server.
IN one business system i can see that there is "associate with XI" button.
But when i want to chnage the business system with correct client 700 , i tried pressing the button after entering the correct pileline url.... nothing happens.....
Can you please let me know the procedure to chnage the technical system with respect to integration engine???
PLease help as our project is held up due to this.
regards,
Rehan

How to change logo in production server- very urgent

Hi,
I have to change the logo in production server, they have provided a new logo, how should I load it into production server as well as how can call it into my Script.
I can upload logo in my development server, and can change it in my script, if I move it to production, my newly uploaded logo will also move to production server, or should I move it some other way, please help

hi,
Steps for uploading Logo :-:
1. Goto the transaction OAER
2. Enter the class name as 'PICTURES'
3. Enter the class type as 'OT'
4. Enter the object key as the name of the logo you wish to give
5. Execute
6. Then in the new screen select Standard doc. types in bottom window
Click on the Screen icon
Now, it will ask for the file path where you have to upload the logo
7. Now you can use this logo in REUSE_ALV_COMMENTARY_WRITE
Here you go !!
*& Form TOP_OF_PAGE
* text
FORM F_TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = IT_LISTHEADER
i_logo = Logo name
* I_END_OF_LIST_GRID =
ENDFORM. "TOP_OF_PAGE
Rgds'
Anver

External X-Fi Surround 5.1 how to change mods.

Hello.
I have a problem. I cant understand how or where to change to gaming mod.
I only have entertainment mod,and no place to change it.
I have the console,but there is no options for it.
please help.

Im not english,and cant quite understand the sentence.
why others can and i cant?
it says 5.,it says X-fi
in bf2 i cant choose X-fi cause it cant be switched to gaming mode.
it cant be switched to gaming mod because its not supported?
i use headphones,not 5. system.
i cant put the puzzle together...
wtf... i feel stupified..

Crystal Reports: How to change Oracle OLE DB server at runtime

Post Author: dvlasman
CA Forum: Data Connectivity and SQL
I'm using a rpt made with Crystal Reports 8.0.1 and VB 6. The report was made using the Microsoft OLE DB provider for Oracle. What I want to do is change to Oracle server / database the report is connecting to at run time before the report is displayed. I am using the Crystal Report Engine 8 Object Library (cpeaut32.dll), not the ocx.After creating the report object:Dim CrystalReport As CRPEAuto.ReportI open my report and discard saved data:'Open The ReportSet CrystalReport = CrystalApplication.OpenReport(msReportSource)CrystalReport.DiscardSavedDataConst sDBServer = "ORCL.SERVER" 'My TNS name for the Oracle ServerConst sDatabase = "ORCL.SERVER" 'I'm not sure what this value should beConst sUID = "system"Const sPwd = "manager"I was then going to change the database connection one of two ways:1:Dim objDatabaseTable As CRPEAuto.DatabaseTableFor Each objDatabaseTable In CrystalReport.Database.Tables Call objDatabaseTable.SetLogOnInfo(sDBServer, sDATABASE, sUID, sPWD) If (Not objDatabaseTable.TestConnectivity) Then Debug.Print "Database failed connection: " & objDatabaseTable.Name End IfNextSet objDatabaseTable = Nothing2:call crystalapplication.LogOnServer("pdsoledb.dll","MSDAORA.1",sDATABASE,sUID,sPWD)Neither of these two way gets me a successful connection. What am I doing wrong, and which is the preferred method to use?ThanksDean

Did you get a resolution to your problem? I cannot dynamically change the datasource location in .NET using CR XI via OLE DB for Oracle. I get "This field name is not known." messages and when I try using the set datasource location in the designer tool, the mapping dialog box comes up with no fields in the right box. Thanks, Brian

How to change the value of Server.ScriptTimeout in IIS administration tools

I do not know how to do this. I have downloaded IIS; W7 is OS.

How is that related to Firefox support?

How to find out the SDM password in WAS server

Hi Friends,
can any one explain how to see the SDM password in WAS server. It is very need ful and urgent?
Thanks & reagards

Hi,
in my opinion you can't see the password. But you can change it.
Changing the (remote) SDM Password
Since the SDM Server offers you functions that you can use remotely, they must be protected from unauthorized use. For this reason, the SDM requires remote users to authenticate themselves with a password. The default shipped password is sdm. You can change this password in the following ways:
Pushbutton in the remote GUI
changepassword command
sdm changepassword sdmhome=<...> newpassword=<...> [password=<...>]
where
newpassword: New password
password: Old password. Since 6.30 SP5, this parameter has been set optional so that the password can be changed without reference to its current value. If this parameter is specified, its value will be ignored.
Note: changepassword command can be executed only if SDM server is stopped (see stop/start SDM Server) and it is in standalone mode (see jstartup). It would be better to return SDM in the same state as it was before the execution.
regards
Timm

SDM Server in Monolithic mode

Hi All,
While updating the java SP-stacks, I am not able to login into JSPM and when checked at SDM Tool server, server is in monolithic mode.
Please provide me your inputs how to change monolithic mode to standlone mode.
SAP PI 7.0 -- On Suse Linux 10
Thanks in Advance.
Regards
Shiva

wrong forum !

How do you switch between web server snapshot jpg and png modes?

I read in another forum a posting by "NathanK" stating:
"The snapshot feature of the web server can
generate images either as png or jpg. In LabVIEW 8.6 and later, the
default which is generated by the web publishing tool is the png
format. In this mode everything happens in memory so there is no
snapshot image file generated.
In the jpg mode there is a
temporary file, however it is not always the same file and the file is
deleted after it is uploaded to the client. I would not recommend
trying to use this programmatically.
If you need more
control over a snapshot of a front panel (and you are using 8.6), I
would recommend making a custom web service that takes a picture of a
VI's front panel and returns it to the client. Then you would have
control over the image."
I am currently using the web publishing tool snapshot feature with an EXE program written in LV8.6. However, each time a browser accesses the html file, the EXE file's memory grows by 72KB (this happens with my custom EXE program and with LabVIEW.exe when running the VI in development mode). I'm assuming this is the png that is generated each time a snapshot is taken, but the program never de-allocated the memory and the program eventually crashes. I'm aslo assuming that if I switch to "JPG mode", the web server will generate a temporary file and eventually delete it, elminating the memory leak. The problem is, I don't know how to change the modes from png (default) to jpg.

I am and have been using the .snap function on many applications since LabVIEW 6.1. It's very simple, easy to use, does exactly what I want it to do, and is still in the documentation of LabVIEW 8.6, 2009 and 2009 SP1 as being supported.
If I am not mistaken, don't you need to have the LabVIEW runtime engine on the target system to use embedded mode? I don't want to have to try and keep everybody who wants to see a screenshot of my program to have to have a run-time engine installed. For one reason, I don't know everybody who wants to monitor our system and they literally can be anywhere in the world if the VPN to our network. Second, those who I do know would would have me install it for them. Third, why go "backwards" in capability...everybody would ask me "Why do we have to do this now?..we never had to do it before", and I don't want to use my time/energy at work to explain why NI cannot fix a memory leak that has been identified in at least the last 3 versions of LabVIEW and is still not fixed.
I had been using either LV 6.1 or 7.1 for a good part of 10 years and had very few problems with them (BTW, DAQmx is the greatest thing every put on a computer EVER). I finally make the transitioin and start using LV 8.6 on a major test platform last year, got to the very end of it and find this out. <sigh!>
It is funny (maybe not), but my work around feels like I just changed the floormats in my Toyota car to keep it from "crashing".
However, if I am mistaken and you do NOT need to use LV runtime engine for embedded mode, ignore everything I wrote above and please let me know that this is the case and I will look into it.

How to change mode of SDM server in CE7.1 ?

Similar Messages

Maybe you are looking for