Z table is not opening in change mode in production server.

Hi,
   In development I have created BDC for Tcode SE11 for z table.
So in that BDC i have recorded like --
SE11->Utilities->Table contentes----> Create entries.
this is working fine in devlopment but this BDC is not working in Production server.
For that i have open the production in change mode and upload the bdc and again i have to close the production server.And this is very hectic work.
My problem is how to open that Z table in change mode to upload the data in production server.
Thanks & Regards,
Sanket.
Edited by: Sanket  Mahajan on Aug 12, 2008 8:06 AM

Hi Saket,
I think the USER ID by which you are logging in the production server will not have authorizations to do changes in production server.
The options you have:
1. You can ask the Basis consultants to give you authorizations of change mode in SE11 transaction.
2. You can write a program which will insert data into ZTABLE using statement INSERT.
3. You can create a Table maintenance of the ZTABLE and add records using it.
best options :
2nd Option is the best option for Mass Data Upload.
3rd option is best if you need to add data in regular interval of time or you need to give this authorizations to end user to add records.
Regards,
Vamsi

Similar Messages

  • File Upload applet not opening in Query Mode

    File Upload Applet is opening in Query Mode in Siebel 7.5, where as in Siebel 7.8 its not opening in Query Mode.
    Should anything be changed in CFG? or siebel restricted this?

    Hi,
    There is a property called "Auto Query Mode" in the applet. Check whether this has been set to "New Query" in 7.5. If so the applet will be opening in Query Mode automatically. If this property is blank, in 7.8, the applet will not be opening in Query mode. Check and let me know.
    Regards,
    Joseph

  • How to find out what users have an order open in change mode

    Is there a table I can easily query to determine which user has a specific order (VBAK) open in change mode?
    Will give points of course.

    HI,
    Use this function module. This will return you the list
      CALL FUNCTION 'ENQUEUE_READ'
                    EXPORTING GCLIENT = GCLIENT
                              GUNAME  = GUNAME
                              GNAME   = GNAME
                              GARG    = GARG
                    IMPORTING SUBRC   = SUBRC
                    TABLES    ENQ     = ENQ
    Thank
    Mahesh

  • I have no navigation bar and firefox will not open in safe mode to reset to default config. Reinstalling doesn't work. Any help please.

    I have no navigation bar ever since I closed it to gain more space on the screen. It won't re-open. Firefox will not open in safe mode, but opens immediately in normal mode with the new improper config, so I cannot reset to default config. I erased Firefox and re-installed and it still opens with the same faulty config. Why does Firefox not give me the safe mode dialog box, why can I not re-open the nav bar, and how can I do these two things, please? Firefox is currently unusable for me without a nav bar and without access to the default settings in safe mode. I cannot research the extensions I'm running since I have no nav bar to go to Tools, Add-ons, Extensions.
    == This happened ==
    Every time Firefox opened
    == I closed the navigation bar to gain more space on the screen and I couldn't re-open it. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)

    Hit the '''Alt''' key to show the Menu bar, then open View > Toolbars and select Menu bar and Navigation bar, so they have a check-mark.

  • My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

    my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

    Rebooted computer works now ok

  • Firefox crashes when opening and will not open in safe mode

    Recently FF3 started crashing when opening. It will not open in safe mode as well. I have uninstalled it including deleting the install folder and profile folders as well as registry entries. Upon reinstallation is will still not launch in any mode.
    I have scanned for malware with several scanners and that has not found anything.
    Here is the crash report cause - nsCOMPtr_base::~nsCOMPtr_base() | nsDocShell::SetupNewViewer(nsIContentViewer*)
    Anti-virus is Trend Micro Worry Free for Business. I uninstalled it and Firefox and then reinstalled only Firefox and still get the same thing.
    I do not know what to try next.

    Add-ons: {972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.3
    BuildID: 20100401064631
    CrashTime: 1274739594
    EMCheckCompatibility: true
    Email: [email protected]
    FramePoisonBase: 00000000f0dea000
    FramePoisonSize: 4096
    InstallTime: 1274097386
    ProductName: Firefox
    ReleaseChannel: release
    SecondsSinceLastCrash: 525200
    StartupTime: 1274739562
    Theme: classic/1.0
    Throttleable: 1
    URL: http://en-us.start3.mozilla.com/firefox?client=firefox-a&rls=org.mozilla:en-US:official
    Vendor: Mozilla
    Version: 3.6.3
    This report also contains technical information about the state of the application when it crashed.

  • Can not open in safe mode

    I can not open in safe mode.  It launches Utilities instead.
    I tried to reinstall Mavericks but it stalled for over an hour.
    I found a loose kernel in my HD fielder and deleted it.
    Anny ideas?  Thanks.
    Allan

    Using Safe Mode. What happens with a normal boot - same thing? If so then your startup volume needs to be reformatted and you need to reinstall OS X.
    Install or Reinstall OS X from Scratch
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Erase the hard drive:
      1. Select Disk Utility from the main menu and click on the Continue button.
      2. After DU loads select your startup volume (usually Macintosh HD) from the
          left side list. Click on the Erase tab in the DU main window.
      3. Set the format type to Mac OS Extended (Journaled.) Optionally, click on
          the Security button and set the Zero Data option to one-pass. Click on
          the Erase button and wait until the process has completed.
      4. Quit DU and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Install button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
               because it is three times faster than wireless.
    This should install the version of OS X that you had installed.

  • Not coming to change mode

    hi all,
          in that IDOC extension program(customer) user exit for extension it is not coming to change mode in my IDES version.It shows the warning message 'This include program is for user_exit only'.
    Rgs,
    Venkat.

    Once after you get the warning message then click on ENTER key and proceed to create that include and write your logic.
    It will accept.
    Thanks,
    Srinivas

  • Why does MainStage not open in 32bit mode?

    why does MainStage not open in 32bit mode?
    When it is set to open in 32bits, and not 64bits.
    Thank you.

    This is the icon in pse 8 your pressing for bridge?
    Yes, Applications from the Go menu in Finder and you don't see a folder called Adobe Bridge CS4?
    When you have the Cookie Cutter Tool selected and click on the little double arrows for the flyout
    menu to select the different shape librarys, you don't see anything listed?

  • OB57 change mode in Production environment

    Hi all,
    Till now we are modifying the table T_043 which is related to user tolerance group in our Production system. Now we are plannig to keep OB57 in change mode(in Production).
    We have tried to change the same in development with SPRO settings steps are as follow:
    SPRO>>>Select the Tcode>>>Edit>>>Display IMG>>>Maintain tab>>>Change mode>>>Select the module>>>Change>>>>No transport + adjustable in dialog>>>save .....
    But here i am unable to save the changes, i have taken the object key and tried the same with developer id.
    And now the requirement is , there any way to change the same through Transport request or direct changes in Production client(CLIENT OPEN).
    Regards
    Nick Loy

    Thanks Subha,
    Issue was resolved. According to my resesarch i found some information as mentioned below for your knowledge:
    SAP will not allow us to make changes to a standard view or table. Here T_T043 is the standard table and V_T043 is the standard view which is mapped with that table. We are unable to change these standard settings. Here i have created a new view with copy of original and mapped the same with standard table. In this new view i have changed the standard settings. Then transported to Quality and Production. Now it is working. For security reason i have created a new Tcode for the new view.
    But when we are going to import the same, need to open client till import complete.
    Now we are able to change directly in production with new Tcode and view, this is reflecting of same database table. This is the time & Resource consuming method.
    Regards
    Nick Loy

  • How to get the Change node in Production Server!!!!!

    Hi Guys,
    Kindly let me know how to get the Change node in Production Server for the Transaction Code Pe03 for generating the Acknowledgement No for the year 2008 .
    Plz provide me the steps how to get the Change Node for Acknowledgement No so tat i can get the configuration done.
    Regards
    Ansuman Mohanty.

    Hi Mr!
    If you want to generate the e-file feature 40ACK, do it in our Customization client box (Golden box) & save the request & move to Quality & production.
    Still if you need to workout only in Production, than with the help of Basis people you can get the Production change mode for 5 to 10 min time & can generate it. But mostly Basis people wont give us change mode for Production box ... with ur request they can do..try it.
    Did u collected 4 quarter TAN no's for 2008 Quarter...if not collect it & generate it at a time.
    All the best:-)
    Kind Regards,
    Saisree.S

  • Stardard Text (changes ) move to production server

    Hai all
    <b>i have one situation to change the content text in the standard text in so10 transaction
    i have done the changes while saving it wont ask for any request
    i need the same changes in the production server .
    how can i transport this standard text ?
    is there any way to transport or send it to the production server?
    if any have any knowledge please share with me my id is [email protected] ?</b>
    thanks and Regards
    Vinay Kumar.
    email id :[email protected]

    Hi,
    USe the program RSTXTRAN to attach a standard text to the tr. request. You will have to create to create a request and then execute this transaction with the necessary inputs.
    regards,
    Ravi
    Note : Please close the thread if the issue is resolved

  • MDX Query not retuern any data on my production server when i check service it is running

    Hi All,
    MDX Query not return any data  on my production server when i check service it is running. when i restart my service  i can able to run MDX Query and get data in my production server.

    Hi Mnishcal,
    According to your description, there is no data returned before restart Analysis Services, right?
    We haven't experiencing such issue before. And we cannot reproduce this issue. In your scenario, can you reproduce this issue? Here is a post which explains why you might not see the data you expect when browsing a SQL Server Analysis Services cube that
    processed successfully. Please refer to the link below.
    http://social.technet.microsoft.com/wiki/contents/articles/19744.ssas-troubleshooting-data-is-not-visible-when-browsing-a-cube.aspx
    Besides, are there any error on the log file? The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Regards,
    Charlie Liao
    TechNet Community Support

  • Error 404, website not found. Uninstalled, installed, firewall fixed to allow programs. Will not open in safe mode.

    Google chrome works fine, but Firefox gets an error code 404. Windows Firewall is configured to allow the program, I have uninstalled/reinstalled, and it won't open, not even in safe mode. Still a 404 code. The same thing is happening to Safari. I can't fix settings in Firefox if it doesn't open. Any other suggestions?

    Once Firefox is open, if you press Ctrl+n to open a new window, does it show the same error or does it work and show your home page?
    '''No! I get the same error.''' Check your home page setting as the URL may be corrupted. These articles should point the way:
    * [[Startup, home page and download settings]]
    * [[How to set the home page]]
    Any improvement?
    '''Yes! That works.''' Check for a hijacked shortcut. Here's how:
    Right-click your Firefox shortcut/icon > Properties > Shortcut tab. The "Target" for 32-bit Windows 7 should be this (no more, no less):
    "C:\Program Files (x86)\Mozilla Firefox\firefox.exe"
    If anything else follows that, remove it. Save your change and test the icon again.

  • Sales order not showing on Change mode

    Dear Expert,
      I have small issue, The issue is when we put sales order number on item level (VBKB_BSTKD_E) in change moode and save it. If we go back to change mode again we do not see the order number. But if we go to display mode we are able to see the sales order number.
    Thank in Advance
    Ajay

    I hope you are taking about table VBKD. B'coz I can't find table VBKB.
    FYI
    Tcode VBKB Bonus Buy: Create Condition Table (Program: SAPMV12A)
    If it is Table VBKD related updating field for item.
    While updating entries in Table VBKD. The header entry of the business data (VBKD) is valid for all items. When you make  change/alteration at item level is done to the business data. Then in the table the item receives a separate entry.
    So, this not standard, when system not allowing to save the changes. But, there can be exception for updating this Table-Field VBKD-BSTKD_E (PO Number). Or may be there is subsequent document for this sales order.
    Regards
    JP

Maybe you are looking for

  • Do two wifi networks in the same home have to conflict with each other?

    I have an Xfinity1 system that requires its own combo modem/router supplied by Xfinity in order to run its system. The premise here is that you can play live tv from any of your devices like computers, iPads and iPhones using their wifi system, and i

  • SDM not starting up in SAP MMC

    Hi There, I have PI7 installed on win 2003 server with MS Sql server database. Since yesterday after I rebooted the system for some reason my SDM server is not running. I can see its status "stopped" in SAP MMC. Even i am forcely restarting it but it

  • Sizes In Adobe Media Encoder...

    I make a PAL movie in Premiere Pro CS3 with clips from my Panasonic GS500 camera. Export to Adobe Media Encoder CS3 and it gives an output frame size (for FLV) of 1024 x 576. I open the same sequence in Premiere Pro CS4 and Export to Adobe Media Enco

  • Physical partitioning have anything to do with where data is on the disk?

    Hi All, I've read through numberous threads here and understand the difference between physical and logical, but no discussion (that I've seen) has asked if there is any relation of physical partitioning to how the data is organized on the disk. For

  • Bad time zone in Syslog Collector Status screen

    Hi, we have a LMS 4.0 and we are watching a wrong time zone in the Syslog Collector Status screen, it says GMT +2 but it should be GMT +1. In the Windows operating system, time settings are well configured; can anyone help me to fix this, please? Reg