How to change MS IAS PROXY-STATE length

hi,
i need to have a RADIUS server as Proxy RADIUS Server like below topology:
NAS <---> MS Windows2003 IAS(Proxy RADIUS) <---> nttacplus(main RADIUS)
but there is a problem, when IAS proxy RADIUS forward an ACCESS-Request with 10 octet PROXY-STATE length to the nttacplus RADIUS, the nttacplus reply ACCESS-ACCEPT with first 6 octet of received PROXY-STATE, so the IAS proxy RADIUS doesn't accept the message
and try to send similiar ACCESS-REQUEST for another two times.
is there any way to reduce the PROXY-STATE length to 6 octets in MS IAS proxy RADIUS?
if no, is there any way to solve the problem?

Hi,
I can’t find any document about changing this attribute.
But obviously, there is something wrong with your RADIUS server.
According to RFC 2865, the Proxy-State
is available to be sent by a proxy server to another server when forwarding an Access-Request and
MUST be returned unmodified in the Access-Accept, Access-Reject or Access-Challenge.
Therefore, if your RADIUS server obeys the RFC 2865, it should have the ability of reading the length of Proxy-State and replies to proxy server with a
unmodified Proxy-State.
For detailed information, please view the link below,
http://tools.ietf.org/html/rfc2865#section-5.33
Hope this helps.
Steven Lee
TechNet Community Support

Similar Messages

How to change the select-options fields length to long

Dear friends:
   I had develop a program for sent email,and it have a field for fill mail address as below:
   data: lmail like adr6-smtp_addr.
   select-options: mailadd for lmail no intervals.
   my customer complain that the field is too short,but I can not change it to longer,the select-options component limit the visible length , how can i do for this problem!

Dear All:
I had realized this function.
I defined a parameter and a pushbutton to replace the select-option componet,
the code share as below.
data: lmail like adr6-smtp_addr.
SELECTION-SCREEN BEGIN OF LINE.
parameters: mailCopy like lmail.
selection-screen:pushbutton 64(5) pubu user-command mailButt.
SELECTION-SCREEN END OF LINE.
select-options: mailadd for lmail NO INTERVALS no-display.
at selection-screen output.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF l_count > 1.
    write ICON_DISPLAY_MORE as icon to pubu.
ELSE.
    write ICON_ENTER_MORE as icon to pubu.
ENDIF.
at selection-screen.
CLEAR l_count.
DESCRIBE TABLE mailadd LINES l_count.
IF NOT mailCopy IS INITIAL AND mailadd[] IS INITIAL.
    MailAdd-low = mailCopy.
    Append mailadd.
ENDIF.
IF l_count = 1 and mailCopy IS INITIAL.
    refresh mailadd.
    clear mailadd.
endif.
if sy-ucomm = 'MAILBUTT'.
    perform show_box.
endif.
*       FORM show_box                                                 *
FORM show_box.
TYPE-POOLS aqadh .
DATA: tab_and_field TYPE rstabfield.
tab_and_field-tablename = 'ADR6'.
tab_and_field-fieldname = 'SMTP_ADDR'.
CALL FUNCTION 'COMPLEX_SELECTIONS_DIALOG'
       EXPORTING
            TEXT           = 'SET E-Mail To '
            tab_and_field = tab_and_field
       TABLES
            range          = MAILADD
       EXCEPTIONS
            no_range_tab   = 1
            cancelled      = 2
            internal_error = 3
            OTHERS         = 4.
IF NOT MAILADD[] IS INITIAL.
    READ TABLE MAILADD INDEX 1.
    MAILCopy = MAILADD-LOW.
ELSE.
    CLEAR MAILCopy.
ENDIF.
ENDFORM.

How to change max in "for" statement

Hi, I am trying to set up a snow scene using the code below
but I'd like to alter it so that it looks more natural... ie: a few
flakes begin to fall, increasing as time progresses. Is there a way
to increment the number used in the "for" statement while it's
looping?

I was inspired by your post and made this.... Hope it helps..
Enjoy! :)
http://www.albingraphics.com/snow.html

How to change (decrease) primary key column length?

Hi all,
I have plenty of data in the table and I need to decrease the primary key column from CHAR(17) to CHAR(13).
I try to use:
ALTER TABLE xx MODIFY (prmy_key (13));
but Oracle give:
ERROR at line 1:
ORA-01441: column to be modified must be empty to decrease column length
Can anyone give me advice on what is the best way to decrease column length? Thanks in advance for your help.

To add to the above, I have done a simple test in the lines that I was suggesting the solution for this problem,
   CREATE TABLE testA
   (pk_col   varchar2(20), jd date, constraint pk1 PRIMARY KEY(pk_col));
   --Insert data into testA
   create table testB as select * from testA;
   TRUNCATE table testA;
   ALTER TABLE testA modify(pk_col VARCHAR2(10));
   INSERT INTO testA SELECT substr(pk_col, 1, 10), jd from testB;
   DROP TABLE testB;
   Select constraint_name, constraint_type, status from all_constraints
   Where table_name = 'TESTA';
   CONSTRAINT_NAME                C STATUS
   PK1                            P ENABLEDAlter command is successful as the table is empty. TRUNCATE flushes the data and resets the high water mark keeping all the constraints. If we safely want to use the TRUNCATE as far as storage issues are concerned,
TRUNCATE table table_name reuse storage;
I think, this would accoplish what has been asked.
Let me know,
SriDHAR

How to change the privacy statement link url

I looked into the previous threads , could not find the answer to "Changing the privacy statement url to clients privacy statement url".
I am talking about the privacy statement URL in the page that user see it as soon as user logs into the e-business suite.
I have read the previous theads and developers guide regading how to show or hide this autofooter thing. but could not find any thing about how to change the one in the login page.I even looked ino personalization but could not find a place to change this url. please HELP.
Another question is " is it ok to show privacy statement in just the first page and hide it in rest of the application pages?"
Thanks
karan

Extract from Personalization Guide - Page Footer - Personalization Considerations
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a standard Copyright and Privacy (that is, its Auto Footer property is set to true), set the Scope to OA Footer, in the Choose Personalization Context page of the Personalization UI.
* If you wish to personalize the URL that points to the Privacy Statement for a page that displays a custom Copyright and Privacy (that is, its Auto Footer property is set to false), set the Scope to Page in the Choose Personalization Context page of the Personalization UI. In the following Page Hierarchy Personalization page , identify and personalize the Privacy page element.

How to change default PIRWBUSER password for ABAP Proxy monitoring ?

Hi,
Please advise how to change setting for PIRWBUSER in PI so no need to use master password PI in ECC server.
In the Message monitoring you can have option to monitoring ABAP Proxy transaction in the other SAP Instance. But of course you need to have PIRWBUSER in that target SAP instance.
How to change this configuration for PIRWBUSER for other SAP Instance. because other SAP instance it migh have different password for PIRWBUSER ?
Regards
Fernand

Hello there.
Please check the note below according to your system:
#999962 - PI 7.10: Change passwords of PI service users
#936093 - XI 7.0: Changing the passwords of XI service users
#721548 - XI 3.0: Changing the passwords of the XI service users
Regards,
Caio Cagnani

How to change Bulk Insert statement from MS SQL to Oracle

Hi All,
Good day, I would like to bulk insert the content of a file into Oracle db. May I know how to change the below MS SQL syntax to Oracle syntax?
Statement statement = objConnection.createStatement();
statement.execute("BULK INSERT [TBL_MERCHANT] FROM '" MERCHANT_FILE_DIR "' WITH ( FIELDTERMINATOR = '~~', ROWTERMINATOR = '##' )");
Thanks in advance.
cs.

Oracle SQL Loader utility allows you to insert data from flat file to database tables.
Go to SQL Loader links on following url to learn more on this utility
http://otn.oracle.com/docs/products/oracle9i/doc_library/release2/server.920/a96652/toc.htm
Chandar

How to change the lengths of the layout

Hi ,
I am executing one report, output is coming fine but next if i go to print preview for PO number only 9 digits are appearing one digit is missing, actually column is trucated, there in print preview there is one tab called Change Layout, there if i see length of the PO no is 9, so its showing only 9 digits, actually length of the PO no should be 10.in change layout the length is editable i can change from 9 to 10, after that there is a button called copy, then it will show correctly, it works only one time, so each and every time user has to change the length, so can any one suggest how to change that length in the layout permanently, bcos there is no save button there.
Can any one tell me from where all these lengths are coming which are appearing in change layout.Surely its not coming from the report.

Hi friend,
That depends upon the space provided by the ALV column for that variable or the heading size its not based on the data element size.
If you want to be more clear lust count the space available for each field available at the print preview.
The details for that are stored in table T180S just see the documentation available for that table.
And see when the table is getting filled like that so that you will be able to find a solution where and how it is getting populated.
Use column width optimization for getting the correct output.
If you have any queries in this please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 5, 2012 4:01 PM

How to change length of line in Photoshop CS3

I must be being really stupid, but I can't find out how to change the length of a line I've drawn in PS using the line tool. Can anyone help me out?

Which type of line did you draw?
Filled pixels, Shape Layer or Path?
If filled pixels, then it's just like with any other pixelsyou have to erase them, or or make a selection and delete them. To lengthen, you'll have to use the Transform function.
If you created your line as a Shape Layer or as a plain path, they are both defining the line as vector elements. If you look very closely, you'll see that the line is actually a thin rectangle-shaped patha boxif you will.
In this case you can use the Path Selection Tool to select two of the anchor points and move them manually, or you can select the entire path and then use the Transform Path function (Command + T) and input values in the Options Bar to transform the points numerically.

How to change the limitation of Table name's length?

The length of table's name or field's name is limited to 30 characters.
Can I change it? If I want to create a long name table,then how can I do?
Thanks in advance!

This is a duplicate of another question
How to change Table name's length?
The short answer is no, you cannot.
Justin
Distributed Database Consulting, Inc.
http://www.ddbcinc.com/askDDBC

How to change the field length in standard sap program.

Hi All,
How to change the field length in standard sap program.
Urgent
Example:
Text1 type c length 75,
To change :
Text1 type c length 150,
Point will be rewarded..
Thank you,
Vikram.C

If the only solution is to change the sap standard program, simply change the program, it will prompt for an access key. This key can be retrieved in the SAP support portal (service.sap.com) at keys and requests, sccr keys, register object.
Sometimes these actions are outsourced to a competence center, so maybe youre not entitled to do this, in any case ask a resident senior developer for support.
regards, Rob

How to change the proxy seting

In my andy phone for net surfing on wi-fi proxy id is needed providing by University but many proxy are available and my id is on only one particular proxy so how to change the proxy no?

The following article might be useful in setting up a proxy:
https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption#w_connection-settings-dialog
Let us know if you need more assistance!

TS1424 apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Tha

Apple store,just wanted to check on how to change my area settings in itunes from United States to United Arab Emirates(that's where i stay).it got changed when i tried to download google maps from the US store in itunes.please help me out here.Thanks

Please please help me, if you know how.

How to change proxy???

How to change proxy??

Hi,
It's possible to change your proxy settings by editting about:config, but this is quite complicated.
There's an addon which can help with proxy settings:
https://addons.mozilla.org/en-US/android/addon/network-preferences-add-on/

How to change the visible length in screen painter?

Hi Guys,
we have field in screen which is type to ATWRT but the visible length is set to 11. ATWRT is 30 char.
Please advise on How to change the visible length in screen painter to make it 30?
When I try to edit the defined length from 11 to 30. It wont allow me to.
Thanks a lot!

Hi,
Try the below method:
Goto Screen Painter -> Double click on Input-Output field for ATWRT another screen will appear with attributes of Input Output field -> Increase the Visible length Value there. (Option of visible length is below the Name and Text attribut of Attribute windiw.)
If the Visible length field isn't allowing change then declare it as a Char type instead of taking the DataType for Data Dictionary.
Thanks,
Preyansh
Edited by: DWIVEDP on Mar 29, 2010 12:42 PM

How to change MS IAS PROXY-STATE length

Similar Messages

Maybe you are looking for