Calibration profile getting resetted to default on screen wake up

My calibration profile changes back to Apple's default calibration from time to time. This happens when I wake up my screen, from time to time, I couldn't find any correlation.
Opening the display preference panel suffices to reactivate my customized calibration profile (I don't need to reselect it by hand, opening the pref panel is enough).
Anybody has this problem? I don't see anything in the logs of the console, so I'm bit clueless. Google couldn't help either so far.

Found this solution in another discussion topic:
"Color profile bug when waking from sleep with an external display"
It seems that the problem is that the OS is using the default profile for external display when waking up...
The solution is quite simple... just make your calibrated profile the "default" choice...
In one of the following location, your should find at least to profiles for your display :
/Library/ColorSync/Profiles
/System/Library/ColorSync/Profiles
~/Library/ColorSync/Profiles
In my case, I have one named "Syncmaster.icc" which is the "default" one with poor colors. I also have an other one named "Calibrated Syncmaster.icc" Simply trash the "Syncmaster.icc" and rename the other using that former name. Re-open Display pref and select that profile (which is now the only choice)...
Should fix the issue.

Similar Messages

SystemD Values Get Reset to Default after some Time

Hi,
I'm using two machine as gateways and Keepalive HA load balancers, so I've enabled some kernel options, but after some time (the next day or so), these options have been reset to their default (disabled) values.
Why does that happen, and how to stop that from happening?
I have to reset the parameters each time. I could set up a script to run on a schedule, but I would like to prevent it from happening in the first place.
These are the values which get reset to 0 (this time):
net.ipv4.conf.all.accept_redirects
net.ipv4.vs.conntrack
net.ipv4.vs.expire_nodest_conn
net.ipv4.vs.expire_quiescent_template
Thank you.

I didn't find anything in the journal, but I am curious about what I did find: every 1-3 seconds, there is an entry which is repeated: "sshd[<Number>]: Set /proc/self/oom_score_adj to 0". What does it mean? I've been scrolling for the last few days-worth of this message, and there is still more... I also have many attempts to log in via ssh from China, from multiple IP addresses, with various user names and many unsuccessful authentication attempts for root; maybe the entry is related to these attempts...
Going back to the original discussion, I think I've seen someone mention a systemd service or something like that which resets kernel settings, or some other things, to their default values, in a post (here), but I didn't find it again. Is there such a service that does something like that?
It is strange that since I started this thread, and since I reset the settings to 1, they have remained at 1. I notice that it happens irregularly.

My firefox keeps reseting every time i close it all options i changed on it get reset to defaults why? is it some kind of error? im using windows xp

well anytime i use firefox i watch some youtube vids watch stuff on jtv maybe even play some runescape then after i exit out of firefox every thing resets to defaults and i dont know why it does this i have scaned my comp with anti virus/malware/spyware and nothing appeared

See https://support.mozilla.com/en-US/kb/Preferences+are+not+saved?s=Options+not+saving&as=s

Why does the screen background picture get reset to default when switching user

iMac with OS X 10.6.8
I have several user accounts on this iMac, each with a different wallpaper chosen from a common folder (library/desktop/nature) in the top level of the hard drive. (Which exists – can always reset background picture from this folder)
When I switch from one user account to another, the wallpaper picture, set on the previous login, appears for a moment and then is immediately replaced by the default blue.
This happens when switching from any user to another. I tried restarting the system but the problem is still there.
This problem just suddenly started and there have been no upgrades or changes to OS X.
Ideas appreciated!!

I've found the answer.
Today, the problem suddenly appeared on my other Mac, which made me look at recent apps..
I installed Team Viewer a month ago, (which is a great app apart from this) so quit it and removed it from the dock. Problem solved!!
The odd thing is that the problem appeared only after I had been using Team Viewer for some weeks.

JSplitpane dividers get reset

Hi there,
I have a simple class that splits the window into four parts using JSplitPanes.
The problem: In the constructor I set the location of split pane dividers. Works fine.
But if i call one of the set methods (to update whats on the screen) the values i set in the constructor get reset to default values. Even if I manually resize the split panes, calling the set method resets the values..
Any suggestions? All comments will be appreciated.
Arman
My code:
public class Frames extends JPanel {
 /** Left vertical split pane */
 private JSplitPane left;
 /** Right vertical split pane */
 private JSplitPane right;
 /** Left-right divider */
 private JSplitPane divider;
 * Class constructor taking four <code>java.awt.Component</code>s
 * as its arguments.
 * @param tl top-left component.
 * @param bl bottom-left component.
 * @param tr top-right component.
 * @param br bottom-right component.
 public Frames(Component tl, Component bl, Component tr, Component br) {
 super(new BorderLayout());
 left = new JSplitPane(JSplitPane.VERTICAL_SPLIT, tl, bl);
 right = new JSplitPane(JSplitPane.VERTICAL_SPLIT, tr, br);
 // XXX: This is the problem. If a set method is called these
 left.setDividerLocation(200); // values will be reset to
 right.setDividerLocation(250); // some default values.
 divider = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT, left, right);
 add(divider, BorderLayout.CENTER);
 * Returns top left component.
 * @return top left component.
 public Component getTopLeftView() {
 return left.getTopComponent();
 * Sets top left component.
 * @param c component to set.
 public void setTopLeftView(Component c) {
 left.setTopComponent(c);
 left.setDividerLocation(leftDivider);
 * Returns top right component.
 * @return top right component.
 public Component getTopRightView() {
 return right.getTopComponent();
 * Sets top right component.
 * @param c component to set,
 public void setTopRightView(Component c) {
 right.setTopComponent(c);
 right.setDividerLocation(rightDivider);
 * Returns bottom left component.
 * @return bottom left component.
 public Component getBottomLeftView() {
 return left.getBottomComponent();
 * Sets bottom left component.
 * @param c component to set,
 public void setBottomLeftView(Component c) {
 left.setBottomComponent(c);
 * Returns bottom right component.
 * @return bottom right component.
 public Component getBottomRightView() {
 return right.getBottomComponent();
 * Sets bottom right component.
 * @param c component to set.
 public void setBottomRightView(Component c) {
 right.setBottomComponent(c);
}

I was struggling with the split pane divider problem (see my post above) for a good few hours. Now it seems that i found a simple solution. I'm going to post it in case someone else comes accross the same problem.
Any further comments, if any, are welcome..
The final code:
import java.awt.BorderLayout;
import java.awt.Component;
import javax.swing.JPanel;
import javax.swing.JSplitPane;
* A class responsible for managing frame contents.
* @author Arman Charif
* @version 12-Jul-2004
public class Frames extends JPanel {
 private JPanel topLeft;
 private JPanel topRight;
 private JPanel bottomLeft;
 private JPanel bottomRight;
 * Class constructor taking four <code>java.awt.Component</code>s
 * as its arguments.
 * @param tl top-left component.
 * @param bl bottom-left component.
 * @param tr top-right component.
 * @param br bottom-right component.
 public Frames(Component tl, Component bl, Component tr, Component br) {
 super(new BorderLayout());
 initPanels(tl, bl, tr, br);
 JSplitPane left, right, divider;
 left = new JSplitPane(JSplitPane.VERTICAL_SPLIT, topLeft, bottomLeft);
 left.setDividerLocation(230);
 right = new JSplitPane(JSplitPane.VERTICAL_SPLIT, topRight, bottomRight);
 right.setDividerLocation(250);
 left.setDividerSize(2);
 right.setDividerSize(2);
 divider = new JSplitPane(JSplitPane.HORIZONTAL_SPLIT, left, right);
 add(divider, BorderLayout.CENTER);
 * Returns top left component.
 * @return top left component.
 public Component getTopLeftView() {
 return topLeft;
 * Sets top left component.
 * @param c component to set.
 public void setTopLeftView(Component c) {
 topLeft.add(c, BorderLayout.CENTER);
 * Returns top right component.
 * @return top right component.
 public Component getTopRightView() {
 return topRight;
 * Sets top right component.
 * @param c component to set,
 public void setTopRightView(Component c) {
 topRight.add(c, BorderLayout.CENTER);
 * Returns bottom left component.
 * @return bottom left component.
 public Component getBottomLeftView() {
 return bottomLeft;
 * Sets bottom left component.
 * @param c component to set,
 public void setBottomLeftView(Component c) {
 bottomLeft.add(c, BorderLayout.CENTER);
 * Returns bottom right component.
 * @return bottom right component.
 public Component getBottomRightView() {
 return bottomRight;
 * Sets bottom right component.
 * @param c component to set.
 public void setBottomRightView(Component c) {
 bottomRight.add(c, BorderLayout.CENTER);
 // ------------------ Private ----------------------
 * Initialises panels.
 * @param tl top-left component.
 * @param bl bottom-left component.
 * @param tr top-right component.
 * @param br bottom-right component.
 private void initPanels
 (Component tl, Component bl, Component tr, Component br) {
 topLeft = new JPanel(new BorderLayout());
 topRight = new JPanel(new BorderLayout());
 bottomLeft = new JPanel(new BorderLayout());
 bottomRight = new JPanel(new BorderLayout());
 topLeft.add(tl, BorderLayout.CENTER);
 topRight.add(tr, BorderLayout.CENTER);
 bottomLeft.add(bl, BorderLayout.CENTER);
 bottomRight.add(br, BorderLayout.CENTER);

Specific Contact Ringtones being reset to default?

Anyone else having a problem with their Samsung Galaxy S3 deleting ringtones set for specific contacts? My wife's phone has done this many times and it is frustrating. We can't figure out why it is happening and how to stop it. It seems like it happens after the automatic backup runs at night and we have tried turning that off yet it still runs and her specific contact ringtones still get reset to default. My Galaxy S3 has not been doing this at all.
Thoughts?
Help!
Thanks!

Are the ringtones ones that you/she has uploaded? If so store them on the phone's interal storage (SDcard and not ext-SDcard). This is not absolutely necessary, but it never hurts.
If you are using Verizon Backup Assistant then get rid of it ASAP. Search this forum and do a Google search for methods to stop and disable Backup Assistant. This topic has been covered many times.
> Insert rant here about the evils of Verizon Backup Assistant and the inability to remove it from the phone's bloatware". <

How do i get to the firefox window so i can reset the default settings?

it is very slow online and when i went on today there was a message to reset to default settings. when i clicked that, it told me to go to the firefox window so i could reset. i don't know how to get to the firefox window. firefox immediately goes to my browser which is comcast. when i click on firefox above, it stays in comcast.

See:
*https://support.mozilla.org/kb/firefox-health-report-says-your-browser-is-slow
Try to update to Firefox 29 via Help > About or download and save the full Firefox installer to the desktop and start the installation with a double-click on the desktop icon.
You can find the full version of the current Firefox 29.0 release in all languages and for all Operating Systems here:
*http://www.mozilla.org/en-US/firefox/all.html
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
See:
*https://support.mozilla.org/kb/reset-firefox-easily-fix-most-problems
When you reset Firefox then a new profile is created and some personal data (bookmarks, history, cookies, passwords, form data) is automatically imported and the current profile folder will be moved to the desktop to an "Old Firefox Data" folder.
Installed extensions and other customizations (toolbars, prefs) that you have made are lost and need to be redone.
It is possible to recover more data from the old profile, but be cautious not to copy corrupted files to avoid carrying over the problem
*https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile

Reset to Defaults on customize screen - timing out?

"Portlet 1 responded with content-type text/plain when the client was requesting content-type text/html"
I get the above error when the "Reset to Defaults" button is used on the customize screen on which there is a very large LOV. My LOV contains 10,941 entries and populates fine upon entry, but the "Reset to Defaults" option seems to have it's own (shorter) timeout duration. Any idea how to change it?
Thanks.

Hello krish_go,
Thanks for using Apple Support Communities.
Since you have already tried restarting and resetting the device to get the control center option enabled, the next step would be to first back up the iPhone and then restore to its factory settings.
Use iTunes to restore your iOS device to factory settings - Apple Support
Take care,
Alex H.

I don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help?

i don't have my navigation bar at all. I tried to start in safe mode but I never get the dialog box the y say you should get to reset to defaults. Help? I have even uninstalled and reloaded firefox
== This happened ==
Every time Firefox opened
== My wife hit a button and doesn' know what happened

See if this helps. View > Toolbars, if no check beside Navigation Bar, click on Navigation Bar to check it.
'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(~~red:Linux & OSX see~~: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M then release the key
''Windows'' Method 2. Tap once on the F10 key, while the Menu bar is visible, choose "View > Toolbars", click "Menu Bar" so that a check mark is placed next to Menu Bar
''Windows'' Method 3. Tap once and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar so that a check mark is placed next to Menu Bar
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See:
http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
http://kb.mozillazine.org/Toolbar_customization#Restoring_missing_menu_or_other_toolbars
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
'''[http://support.mozilla.com/en-US/kb/How+to+customize+the+toolbar How to customize the toolbar]'''
'''''Other Issues''''': ~~red:You have installed plug-ins with known security issues. You should update them immediately.~~
'''Update Java''': your ver. 1.6.0.18; current ver. 1.6.0.20 (important security update 04-15-2010)
(Firefox 3.6 and above requires Java 1.6.0.10 or higher; see: http://support.mozilla.com/en-US/kb/Java-related+issues#Java_does_not_work_in_Firefox_3_6 )
''(Windows users: Do the manual update; very easy.)''
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed.
'''NOTE:''' Java version 1.6.0.21 has been released. It is mainly an update for developers of Java applications and most users do not need to be concerned about downloading version 1.6.0.21. '''''At this time''''', the update option in existing installations of Java 1.6.0.20 are not updating to version 1.6.0.21; '''''at this time''''', it must be manually downloaded and installed. According to the Java release notes:
''"'''Bug Fixes'''''
''Java SE 6 Update 21 does not contain any additional fixes for security vulnerabilities to its previous release, Java SE 6 Update 20. Users who have Java SE 6 Update 20 have the latest security fixes and do not need to upgrade to this release to be current on security fixes."'' Source: http://java.sun.com/javase/6/webnotes/6u21.html
'''Install/Update Adobe Flash Player for Firefox (aka Shockwave Flash)''': your ver. 10.0 r45; current ver. 10.1 r53 ('''important security update 2010-06-10'''; see: http://www.adobe.com/support/security/bulletins/apsb10-14.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: '''[http://support.mozilla.com/en-US/kb/Managing+the+Flash+plugin#Updating_Flash Updating Flash]'''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
-exit Firefox (File > Exit)
-''In Windows,'' check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-''In Windows,'' double-click on the Adobe Flash installer you just downloaded to install/update Adobe Flash
-when the Flash installation is complete, start Firefox, and test the Flash installation here: http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_15507&sliceId=1
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version of Flash. To install/update the IE ActiveX Adobe Flash Player, same instructions as above, except use IE to download the ActiveX Flash installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Flash ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]
'''You '''~~red:'''MAY'''~~''' need to Update Adobe Reader for Firefox (aka Adobe PDF Plug-In For Firefox)''': your ver. N/A; current ver. 9.3.3 (important security update release 06-29-2010; see: http://www.adobe.com/support/security/bulletins/apsb10-15.html)
~~red:Check your version here~~: http://www.mozilla.com/en-US/plugincheck/
See: http://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
''You may be able to update from the Adobe Reader installed on your system'' instead of going to the Adobe site and downloading. Open the Adobe Reader installed on your system (''in Windows, Start > Program Files, find and click Adobe Reader to open''), click Help, click Check for Updates. Allow the download/update to occur. If you use this method, no need to proceed with the instructions below, '''but''' do look at the two bulleted items at the bottom "'''NOTE for IE:'''" and "Also see:". Restart Firefox and check your new version here: http://www.mozilla.com/en-US/plugincheck/
''If you go to the Adobe site to download the current Adobe Reader:''
-'''use Firefox to download''' and '''SAVE to your hard drive''' (save to Desktop for easy access)
~~red:-See the images at the bottom left of this post to see the steps to take on the Adobe site~~
-exit Firefox (File > Exit)
-In Windows: check to see that Firefox is completely closed (''Ctrl+Alt+Del, choose Task Manager, click Processes tab, if "firefox.exe" is on the list, right-click "firefox.exe" and choose End process, close the Task Manager window'')
-In Windows: double-click on the Adobe Reader installer you just downloaded to install/update Adobe Reader
*'''NOTE: On Vista and Windows 7''' you may need to run the plugin installer as Administrator by starting the installer via the right-click context menu if you do not get an UAC prompt to ask for permission to continue (i.e nothing seems to happen). See this: http://vistasupport.mvps.org/run_as_administrator.htm
*'''NOTE for IE:''' Firefox and most other browsers use a Plugin. IE uses an ActiveX version. To install/update the IE ActiveX version, same instructions as above, except use IE to download the ActiveX installer. See: [[ActiveX]]
*Also see: http://kb.mozillazine.org/Adobe_Reader ~~red:'''''AND'''''~~ [[How do I edit options to add Adobe to the list of allowed sites]]

How to get back default Lock Screen Image of Windows 8.1

I recently upgraded windows 8 to Windows 8.1, but it reset my custom lock screen image . I tried for default lock screen of windows 8.1.I can't find any default lock screen
images of windows 8.1 (Only custom images are available). How to get default lock screen images? Does any any one know? please help me..

The last "solution" works only for pressing Ctrl+Alt+Delete and clicking
Lock. If you sign out of Windows and sign back in, that ghastly Windows 8.1 lock screen picture will come back.
You can delete the img100.png file from your WinSxS folder: right lick on this file, click Properties, click the Security tab, click Edit, click Add, type your Windows user name in the white rectangle under "Enter the object
name to select", click Check Names, click OK, then click Advanced, click Change, take ownership of the file, give yourself Full control over this file, click Apply and then OK. You may see your name three times in the Security tab (as user, administrator,
and yourself). Make sure that each instance has full Control
If this does not work, you can disable the Lock Screen: press Windows+R, type
gpedit.msc, click OK, in the Local Group Policy Editor window that opens click on Computer Configuration > Administrative Templates > Control Panel > Personalization, right click on the "Do not display the lock screen" option, click
Edit, check Enabled, then click Apply and OK.
This, however, is a workaround rather than a real solution, which, it seems, Microsoft does not have.
I have exactly the same issue with the horrid stripey thing. Furthermore, in Settings, Lock Screen Preview is completely blank both on current and past images.
I've tried all the tips I've found around the web with no success. I get the horrid stripey thing back.
I found this freeware called Lock Screen Customizer. Seems to work so far but time will tell. (Note that the download includes both win8 and win8.1 versions.)

Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older ver

Firefox 3.6.8 will not start. I have to go to safe start, click reset to default, ok, then the shutdown box appears, I click cancel and it will open. I have rest profile, uninstalled and reinstalled, clicked alll he boxes on safe start, tried an older version need help. in English
== This happened ==
Every time Firefox opened
== either after I last updated to 3.6.6 or .7 or reset my inernet exploerer values to default

I had same problem where Firefox 3.6.8 would not start or open. Spent many hours trying different things to fix it. Uninstall of previous version and reinstall did not make any difference. Finally, after uninstalling Firefox, I searched for Firefox folders and files on my computer, deleted and removed all Firefox folders and files - deleted anything and everything related to Firefox so that it will be as if I was going to download Firefox for the first time ever. Then, using another browser, I downloaded Firefox 3.6.8 and installed it. It could be that some Add-Ons or something else from the older version of Firefox or profile was interfering with the new one. It was easier to delete remove everything and install all over again clean than to figure out which part was causing the problem.
Keep in mind, when you delete all Firefox folders and files from your computer, you are deleting all your bookmarks and all your Add-ons. If you want to keep those bookmarks, you might want to save the URLs someplace safe to bookmark them again before deleting them. You need to re-install the Add-ons also. Upon installation, it asks if you want to import bookmarks and settings from another browser or settings you might have. I imported them from my other browser. Now, Firefox works. I also installed up-to-date Add-ons.
I hope this helps. Always keep more than one browser functioning on your computer, just in case one fails.

My Firefox is not working. (All I get is a blank white screen with the Fireox logo). If I have to reinstall firefox 3.66, how can I transfer my old profile to the new installation?

My Firefox is not working (All I get is a blank white screen with the firefox logo. If I have to reinstall Firefox 3.66, how can I transfer my old profile to the new installation?
== This happened ==
Every time Firefox opened

David. Thank you very much. The problem was not with the canvas but rather the Viewer. But the solution was the same. Somehow, the Viewer window was re-set to Alpha. I changed it back to RGB.... and the picture is back. These issues are often very simple.... but they can drive you bats if you don't know the answer. Very grateful. Tim

The back button no longer works. I have disabled all add-ons, rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

the back button no longer works. I have disabled all add-ons,rebooted & reset the defaults for the browser and nothing has changed. This happens on all webpages.How do I get the back button to light up again?

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
*Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
Another possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
*http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
*https://support.mozilla.com/kb/Bookmarks+not+saved#w_places-database-file

How to get a default variant screen using LDB.(HR-ABAP)

Hello,
I have created a report using LDB PNP.Used HRBEN000 as a hr report category.
Got a default selection screen, I want to add one more field, for this I have selected the field from further
selection button, and displayed on the screen. Now i saved as a variant.
how to get this default screen using the variant in the report/program when executed?
Please help me.
Thanks&Regards,
Archana.

Hi ,you camn always make your Z report category...if the field is present in further selection tab..
if not you can create your own paramerter or select option.....
but you have to handle it in your code ....as get pernr wont filter on its basis(parameter select optyin created by you)
but why loop at screen is not working?
let me know how you are doing...
have to do it in at selection-screen output

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile b

I have been having a issue with getting the colors on my monitor to match the colors fro my print lab. I now have the monitor calibrated to match the prints but when I open elements it doesn't use the same colors. If i have it use the calibrated profile by changing the color management settings, the color picker no longer shows true white or black. How do I get elements 12 to honor the new calibrated settings?

Ok so I've done what you said and this is what it's come back ....
I don't know that these are the errors , but they're the things which don't look right ...
Throughout the shut down there is a recurring line ;
It says ;
Com.apple.launchd 1 0x100600e70.anonymous.unmount 301 PID still valid
Then there are 2 more which I think are related ;
Com.apple.securityd 29 PID job has I overstayed its welcome , forcing removal.
Then the same with fseventd 48 and diskarbitrationd 13
Oh and on Launchd1 : System : stray anonymous job at shut down : PID 301 PPID13 PGID 13 unmount...
Then the last process says "about to call: reboot (RB_AUTOBOOT).
Continuing...
And stops ...
Hope this means something to you ... Thanks again for your help so far :-)

Calibration profile getting resetted to default on screen wake up

Similar Messages

Maybe you are looking for