HOW TO CHANGE SETTINGS IN WINDOWS 7 TO IMPORT CD'S INTO I-TUNES?

Please tell me how to configure my Windows 7 settings so that when I play a CD it automatically starts up in I-Tunes.

I need to know the settings and the code to change
the password in windows 2000 server.Egads, kind of makes one wonder what in the world you might be up to, doesn't it? I mean, this is your first post on this forum, and you don't ask for help with specific code, just request that someone hand you off some code that may or may be seen as needed to break into a secure system (well, as secure as Windows can be, anyway).
Anyhoo, if you look at some of the documentation out there, it seems that you need the old password to change an existing password, and a different password to set an existing password. So if you're looking for a way to hack into your sweetie's PC, you're probably out of luck. But if you have a valid reason for doing so, you may be able to use this info to your advantage.

Similar Messages

  • TS1811 Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows

    Hi!! I am a user of i Pod 5g 32GB....I got the same problem for which the solution is given above  "
    iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
    "....but the thing is that.......in my laptop I have a windows operating system....that is windows 7....so can you explain how to do settings in Windows 4 same

    Archived - iTunes for Mac reports error -50 when trying to authorize iTunes Store purchases
    Products Affected
    iTunes 7 for Mac, iTunes 8 for Mac, iTunes 9 for Mac
    This article has been archived and is no longer updated by Apple. 
    Symptoms
    After installing the Mac OS X 10.4.9 Update, iTunes may be unable to properly authorize your computer to play your iTunes Store purchases.
    Resolution
    The following steps will delete your network preferences. Most broadband connections do not require any special settings to connect, but if your connection does or if you are not sure, please contact your ISP or network administrator for further assistance.
    Important: You must be logged in as an Administrator.
    Click the Finder icon in the Dock.
    Choose Go to Folder from the Go menu.
    Type /Library/Preferences/SystemConfiguration
    Click Go.
    In the Finder window, locate the file named NetworkInterfaces.plist.
    Drag this file to the Trash.
    Restart the computer.
    Once your computer has restarted. You will not be able to connect to the Internet. Now you will need to refresh your network settings to be able to connect again.
    Choose System Preferences from the Apple menu.
    Choose Network from the View menu.
    To refresh your network settings, from the Location pop-up menu, choose New Location.
    Type a name for your location and click OK.
    Click the Apply Now at the bottom right to accept the changes.
    If your network connection requires any special settings, you will need to put them back in at this point. Once you have made these changes you should be able to connect to the Internet again and authorize your computer to play your iTunes Store purchases.

  • How to change the default window size display font size on Lync 2013 main window?

    Hi champs,
    Just a simple non-technical question: How to change the default window size display font size on Lync 2013 main window on Windows 7 desktop?
    Thanks,

    Hi,
    Did you mean change the Lync: Change the Default Font and Color of Instant Messages just as Edwin said above?
    If not, as I know, there is no natural way to change it.
    If yes, on the latest version of Lync 2013 client, there is a new option “IM” on Lync client “Options” list. And you need to change the default Font and Color of IM in the interface of “IM”.
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I would like to know how to insure that all track from a CD I rip into i-tunes all go into the same file regardless of the artist on the CD. I was recdently importing an All Time Low CD into i-Tunes for my daughter and because one track featured a guest a

    i would like to be able to insure that when i import a CD into i-Tunes that all tracks from that CD go into a single file for that album in their proper order regardless of whether or not there is a featured artist on one or two tracks or whatever. i recentl;y imported an All Time Low CD into i-Tunes for my daughter and because one song featured a guest artist i-Tunes placed that song in a seperate folder and so when i synced my daughters i-Pod Touch that one track is not with the rest of the tracks form the album and has to be listened to seperately. The song is from the same album and should be where it belongs with the rest of that album so she can listen to the entire album with the tracks in the proper order. I am sure that this can be done i just don't know how.

    Edit the Name of the problem song to Name [Feat. Guest]
    Change the Artist of that song to All Time Low
    marley2012 wrote:
    ... and i want to make sure that from now on all songs from any CD I import into i-tunes all go into the same album file if they are on that album originally. i do not want i-tunes seperating songs from my CD's for any reason. hopefully this is more clear.
    What you want cannot be done. iTunes has its quirks, and the above is the kind of workaround needed to make the media display sensibly on any device. The article I pointed you to has others that you may find useful in future.
    tt2

  • How to change settings to view JPEG images?

    I have a Gmail account and when I attempt to view Jpeg images on emails in a larger size I get a blank page with a crossed box in one corner . How can I change settings on my PC to view the images?  

    Hi:
    Assume you're using Internet Explorer browser?
    Is it happening on all images you open?
    You can verify Internet Explorer is setup to show images by going to: Tool, Internet Options, click the advanced tab and under Multimedia make sure Show Pictures is checked.
    Make sure you have the latest updates for Internet Explorer from Windows Update.
    Extra:
    http://www.majorgeeks.com/content/page/images_not_displaying_in_internet_explorer_red_xs_as_images.h...
    Regards
    Visruth
    ++Please click KUDOS / White thumb to say thanks
    ++Please click ACCEPT AS SOLUTION to help others, find this solution faster
    **I'm a Volunteer, I do not work for HP**

  • Change settings from windows service pack2

    ''duplicate - locking - https://support.mozilla.com/en-US/questions/889659''
    i changed settings to run with windows service pack 2
    now want to change back to windows 7 how?

    Restore your iPod in iTunes for Mac. Just be aware that restoring will erase and reformat the iPod's hard drive, reload the software with the Mac version and put it back to default settings, so if you have songs on your iPod that aren't on iTunes you will lose them if you have no back up. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Press Done and the iPod will appear in iTunes and start to sync. If you want to update manually or using selected playlists uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and you can choose whatever setting you like: Restoring iPod to factory settings with iTunes 7

  • How to change Default Finder Windows Size?

    Hi all:
    New Finder windows show Macintosh HD and there is no problem in keeping the size or view options every time I open a new window (command + N).
    I can change "New Finder windows show" to another folder and works just as well.
    But when I open a folder in a new window (double click on an icon folder) the size of the window is very small and different from the window displayed by using command + N.
    Finder saves and applies default view options to all windows without a problem, but not the default size or in other words: 
    default windows size is different from new finder windows size.
    In Snow Leopard I could change default size of all windows holding down the Shift key while dragging and changing the size but in Mountain Lion it does not work.
    I have also deleted all files .DS_Store but neither works.
    I searched a lot but can not find a solution to this problem.
    Thanks.

    As far as New Finder Windows (command+N) are concerned, there's no problem.
    All other folder's Finder Windows I have not modified manually are displayed with the default size shown in the attached image. That is the window size that I want to modify.
    Thanks.

  • How to change settings for insert table

    I use DW CS4. Don't know how this changed but now when i click insert>table the result is insertion of a table with width of 960 and 8 columns and 8 rows?
    Where can i change this back to what it was so that in properties i can set the width, the number of columns, the number of rows, etc.
    thanks for your help,
    Jim Balthrop

    JBWebWorks wrote:
    I use DW CS4. Don't know how this changed but now when i click insert>table the result is insertion of a table with width of 960 and 8 columns and 8 rows?
    Where can i change this back to what it was so that in properties i can set the width, the number of columns, the number of rows, etc.
    Dreamweaver should remember the last table definition you put on the page.
    Insert>table>Specify Rows/Columns/Width
    That should then be the default until you specify something else.

  • How to Import WMA files into i Tunes?

    Can anyone suggest how to import my Wma files from Windows Media Player on a PC into iTunes on my iBook?
    Many Thanks!

    ITunes will not import nor play Windows Media Audio files. If they're not copy-protected, though, you may be able to convert them with EasyWMA (freeware) or Sound Converter ($10.00 US).

  • How to change settings for all users?

    Hi All,
    In cPro we have User Settings button. On clicking that we get a Tabstrip where you will find "User" tab.
    my question is: How can we change the default settings for all users e.g setting the checkbox "Scheduling only manually" to true ?
    Best Regards,
    Arti.

    Hi Arti,
    In cProjects the authorizations can be managed either by authorization profile administration by system administrator for General authorizations or by Project specific authorizations for individual cProjects elements by Project owner.
    Try the first one and I hope you will get the solution.
    Regards,
    Nishit Jani
    Award points only if you find the information useful.

  • Preview Insert Page from scanner How to Change Settings

    I often look to add pages to existing scanned PDF documents using Preview's Insert Page from Scanner Function in Mavericks.  Selecting this automatically opens a scan dialog.  When i use the flatbed to scan, it seems to always scan in black and white vs. greyscale or color.  I can't find anyway to change these settings.  When i scan from the document feeder, it automatically scans in color.  I think there has to be a default settings for this somewhere ,but I can't find it.  Anyone know where the settings may be?

    Thanks for the reminder to update my product info!  It's been a while since I posted.  My scanner is a Canon MX892.   The window you show, I see when I use Image Capture or Import From Scanner, but there is no pop-up or any menu to change any settings when I use Insert Page From Scanner.  I use this function to add on pages to an original PDF, which is the easiest way I have found to do that.  Here is the screen I get - no ability to change any settings other than Flatbed vs. Doc Feeder.

  • How to change settings for video

    I purchased a tv series from iTunes--my options for downloading it to my ipod nano are to download all, the 1,3, 5 or 10 most recent, or unwatched episodes. How do I change the settings so that I can download the least recent watched ones?
    Any help would be appreciated,
    Thanks.

    That works for the all the controls/filter settings. The clip length still defaults to 10 seconds, but that's OK, since the main thing I was looking for was to change the clip's internal settings. Thanks for your help

  • How to change settings on iphone so location of photo is known

    When I got my iphone 4 and downloaded pictures to iphoto, the info for the photo would show date, time, location. Now the location is missing. How can I get the location to show up again? I think I accidently changed a setting.

    Settings>General>Reset Location Warnings. This will re-generate prompts for all apps that use location info.
    Also, Settings>Location Services>On>Camera>On.

  • How to change Environment variables Windows Vista SP1 Home premuim 32 bit

    Hei. I run Windows Vista Home Premium 32bit SP1. Now i have a huge problem. By a mistake i changed the name in the environment variables settings. Now i cant access it to change it back. the message is "cannot find systemproperteis, control the
    settings and try again" But i cant controll the settings when i dont get access!! I remember it was %SystemRoot% before. If i right click My Computer-->Properties i cannot access the advanced tab. I cannot run anything from System32. If i run
    services.msc i get the note "the path do not exist, controll the setttings and try again". I am adminstrator. I can run cmd but not in adminstrator. Is it som way i can change or restore it to the right variables??

    Have you tried System Restore? See:
    http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/
    If the initial instructions don't work, scroll down to the heading "If Your System Won't Boot"

  • How to change gateway in windows 7 from ethernet to usb 4g modem?

    We have a Windows 7 machine that is connected to internet by satelite through ethernet. This workstation also has a USB 4G modem that should be used by a software application. We would like to have all network functionality to go through normal ethernet
    traffic and just 1 software application to use the USB 4G modem. How can we set this so we don't have to disconnect everytime from ethernet when we would like to use the 4G connection by the USB Dongle/Modem??

    Hi GadgetServer,
    If my understanding is right, you want to use USB 4G modem for one software and other network traffic goes by normal Ethernet.
    I think we could add route table if you know the detonation address that the application will visit.
    For more information about adding route table, please refer to the following article.
    http://technet.microsoft.com/en-us/library/bb490991.aspx
    Additionally, we could contact the software publisher to see if there are options to choose the USB 4G modem.
    Best regards,
    Fangzhou CHEN
    Fangzhou CHEN
    TechNet Community Support

Maybe you are looking for

  • Custom invoice blocking reason

    When posting an invoice, several checks are done to see whether invoice items should be blocked for payment. This is being done based on price and quantity. Right now we want to block payment for an incoming invoice item if that item does not have a

  • How to call multiple stored procedure from same DB Adapter

    Hi, I want to invoke 3 stored procedures from my message flow in BUS . I created a DB adapter and invoked 1 successfully . Now I don't to configure 2 other DB adapters for calling other 2 stored procedures . I want some how to be able to call the oth

  • Re-install Mail.app?

    How do I re-install the Mail.app? I can't find the download for it. I've got some sort of gremlins in my program that is deleting ALL my messages. Is this risky?

  • Create() is hanging

    I am using JBoss3.0 CMPs, i have a bean named GroupBean. while calling groupHome.create(....) it is suddenly hanging. i have no clue about it, can anyone explain me why these dead-locks occur in ejb cmps. Regards Sekhar

  • ACC doesn't create duplicate.

    I've read all the tutorials about how to make a custom ringtone. I am running the latest version of itunes. The problem is when I right click the edited song and select Convert to ACC, it shows that it's converting, but then no duplicate file appears