How to change stock category of handling units at mass level without Development

Hi,
     We have hundreds of handling units with stock category "blank" in our returned stock storage location which is HU managed. MMBE shows different
     value in Return stock what we see in HUMO is only One HU with very less qty. visible with stock category "R".inventory stock is different than the
      HU stock visible in HUMO
     can some one help in explaining how can we change the stock category of HU's from Blank to R. is there any standard process offered by Sap.
     Development of program to get it done is out of scope right now
     Thanks,

i am struggling to figure this out too.right now we if i look into MMBE i see the returned stock
value.but HUMO does not show any handling units with stock category R when searched
though Storage location is HU managed.i suspect user has done GR without delivery which cause the dependency.
Thanks for quick response.

Similar Messages

Material to Material stock transfer betn Handling Unit to nonhandling Unit

Hi Experts,
Pls explain step by step procedure to Material to Material stock transfer betn Handling Unit to nonhandling Unit.

Hi,
You have several options. In case you use the Stock Transport order scenario, you simple pick and pack in the HU managed SLOC and PGI. You PGR in the non HU managed SLOC. HU's are not taken into consideration. If you would use inbound deliveries, you can have the HU's copied from the inbound to the outbound delivery but still you dont do anything with the HU in the non-HU SLOC.
You can also use tcode VLMOVE, if your HU managed SLOC is not connected to a WM. You do a 311 posting which creates a posting change delivery. After PGI the HU is moved from SLOC 1 to SLOC 2.
MdZ

How to get hierarchy of a handling unit in delivery

Hi All,
We have a requirement of displaying in the form output highest level handling unit details(measurements length width and all).
After that we want to display lower level handling units materials that has been packed.In the transaction Vl03n I can find this by just double clicking the parent Handling unit.
To make simple how to get the hierarchy of handling units?
If I know handling unit(say HU1) how to find there are some handling units(may be HU2,HU3) included in this handling unit HU1.
I refered to the tables VEKP and VEPO it does not help me in this regard.Please suggest some body some idea on this.
Regards
Mahesh

Hi,
Have you look into field VEKP-UEVEL (Higher-Level Handling Unit)
RF_SW_VEKP_READ Select from table VEKP - 1st layer
VEKP_READ Select from table VEKP - 2nd layer
Kind Regards
Edited by: Raymond Friston on Apr 24, 2008 8:37 AM

How to use Stock Category Group for two different configuration.

Hi all,
I want to use the stock category group to do this scenario:
I have two process using the same location, the process A wants to consider Stock cat. Grp. 'ZSW' (SAPAPO/LOC3) so it will consider Stock using CC, CF and CE. The process B wants to consider Stock Cat. Grp. 'ZST' to consider only CC.
My doubt:
How can I do that setup to make different things according the process? I tried to do something in Planning Area (SAPAPO/MSDP_ADMIN) but doesnu2019t work.
Can anyone help me?
Thanks,
-Ralph Veiga

Hi Ralph Veiga,
Indeed the stock category group is define at location level...
I think your answer involves macros more than PA settings.
First I will suggest to split the stock key figure into 2: one for CC, one for the other.
For the CC, use the standard (cetegory group with CC only on the location master)
Now you need to populate the second key figure with CF and CE.
You should be able to built a macro using function PHYSICAL_STOCK() to get what you want.
For sure yuo first need a way to check if you want or not the CF and CE. Here implement your own logic for exemple base on your product characteristics with either MAT(), MAT_C(), MAT_EXTRA(), MATLOC_C()...
Else you can use a Z function in the macro to collect this data, but it involves ABAP coding.
PS: you don't actually need to split the key figure into to, but I think it helps with visibility...
Regards
Julien

How to change the profile value in the pl/sql code without making change in the database

How to change the profile value in the pl/sql code without making change in the database.

I have program ,where if the profiles 'printer and nunber of copies ' are set at the user level, by default when the report completes the O/p will be sent to the printer mentioned in the set-up. but what user wants is
if these Profiles are set for the user running this program automatic printing should not be done.

How to change the posting date at the line item level in a sales order

how to change the posting date at the line item level in a sales order

Hi,
I believe the POSTING DATE will appear on the accounting document
In the Accounting document, the posting date will be based on the Billing date.
Please let me know if you need any more details
santosh

How to delete inspection type assigned in material on mass level

Hi Team,
How to delete inspection type assigned in material on mass level. This inspection type is assigned in material master with indicator set as"Task List", however we are using "material specification". This inspection type is assigned to material type using t-code QA08.
I can deactivate this inspection type using QA08, but I want to delete this record from material master first. So that it would adopt my config. next time when I will assign again insp.type in QA08. I have set this indicator in config. of insp. type as default to "material specification".
Pls suggest me solution to delete this insp. type record from material master.
Thanks

hi
if Material speciiication and task lists are checked -- then no need to do anything,
but only task list checked and u want to do based on mat.spec -- then you need to deactivate and reassign same inspection type using QA08.
no other way, ensure ur stocks are not in QI
thanks
Sami

Deriving/ change the item category from handling unit

Hi SAP GURUS,
In vl01n I want to derive the item category based on the handling unit. Hnadling unit is derived from the payment terms.
Please let me know the required configuration or the development for this.
Thanks

i need ur help regarding the Sales order item category redetermination.
         we are having two item categories YNAE and YNAG and it contain schedule line categories CP and CB ( i.e for item category YNAE schedule line category is CP and
         for item category YNAG schedule line category is CB), for YNAG Purchase Requisition is automatically created becz of functional setting on save and it is working fine.
         For every line item in sales order line item level item category YNAE will be determined by default as per functional settings.
         Now my requirement is that, if sales order line item doesn't contain 100% confirmed quantity, than i needs to change the default line item category YNAE to YNAG
         which i am trying to do it in USEREXIT_PRICING_PREPARE_TKOMP becz in this exit i am getting the values in XVBAP and XVBEP and it is working fine .
         But schedule line category is not getting redetermined automatically what i mean is, if i change the item category to YNAG from YNAE in user exit corresponding schedule line category CB of YNAG is getting determined automatically at the schedule line level and if ichange the schedule line categories in XVBEP in exit USEREXIT_PRICING_PREPARE_TKOMP, changes are reflecting at the schedule line level but Purchase requisation is not getting created for schedule on SAVE and its delivary dates are also not getting determined properly. If press the option ATP check at the schedule line level than very things will getting corrected in the order.
i am using UPDKZ = U in both xvbap and xvbep for changes
I feel that i am not doing this in proper way, do u have any idea about how to redetermine item category. please let me know if u have any idea .
Regards,
Vaddepally Manoj

Urgent - How to change Item category for Open Purchase Order

Hi Team,
Lil bit tricky issue.
My client has asked us to change the existing Item Category values, Combinations, Category Set etc. Its been changed and uploaded successfully.
The question here is how we need to handle the category for Open Purchase Order. How to update the same.
Do we need to do manually or any other way ?
Please advice
Regarads,
John

Hi John,
This is reallly a tricky issue!
I guess you cannot change the category of an existing PO's.
This field will be greyed out once we save the form...there were no profiles/other setups to enable this field.
For all new PO's since you have changed the new category value that should not be a issue.
Lets wait for some of our colleuges opinion.
I guess PO cancel should be the final option if we dont hear any new work arounds.
Thanks
-Arif.

How to inventory packing material on Handling Units frm Inbound Del @ PO?

I am receiving raw material against a PO via VL31N, where I pack into handling units. When I post GR for this inbound delivery, the Raw Material is getting a 101 but the packaging material is not being considered. Is there a way I can get the packaging material into inventory? I did verify the following settings as suggested in a different post here and yet the Packing materials are not considered. Any help is appreciated.
1. there is a plant in your HU (you can control this in your packing material type in transaction VHAR; set plant determination either to A or B).
2. there is an item category in your HU (you can control this in transaction 0184; create the following entry: EL / VERP / PACK / / ELP. If you now create an inbound delivery type EL and your packing material has item category group VERP the system will assign item category ELP to your HU.
If both requirements are met the system will generate an item in your inbound delivery after packing.
Then make sure that the item category of the HU (ELP for example) has movement type 501 assigned to it in transaction 0VLP.
If you then post the GR for your inbound delivery, the packing material will be posted on stock.

Hello,
It is well described in:
[Note 831204 - Delivery items for packaging materials|https://service.sap.com/sap/support/notes/831204]
pay atention on this prerequisit
For the relevant delivery types the 'ItemRequirement' routines
have to allow items which does not refer to a sales order.
Standard routine 202.
[Customizing path: Logistics Execution --> Shipping --> Deliveries
--> Define Delivery Types]
Andrzej

How to find stock category for a particular material in inventory in r/3

Hi All,
I have found there is no update of some material category from r/3 to bw. when data is loading from ods to cube there is a routine for valued stock i.e., eg: stock category is 'U' then only update to cube other wise no update.. some stock category is missing in ods so those data is not updating to cube so data is not matching from r/3 and bw.. could you any body please let me know where we can check stock category in r/3....
just i want to check the postings in r/3 side for stock category which ever is not update to cube..
I have tried in MB51, MB52, MB5B.. i couldnt find category for a material... if any body knows it please let me know..
Thanks & Regards
Sreekanth
Edited by: sreekanthbulle on Sep 2, 2011 9:39 AM

Hi
Are you investigating Inventory as well..Can you pls share your design and how reconcile to match the data with SAP?
Also how do I refresh data again from begining to do FULL REPAIR? pls help

Stock view with Handling Unit

Hi everybody:
I need to be able to see the stock for a some materials that are managed in Handling Units.
I need to consult the total stock for each one of these materials, but they have atleast 2 Packing Instructions, then because this, I need some functionallity to see the stock in each Packing Instructions.
Is there any way to get this ?
Please & thanks
Omar Perea

Thanks Jürgen L:
I got a very useful you help, however, is this possible to use with the Availability Check since SD when this functional module creates a Sales Order, and then, they try to check de availability for the materials, is possible this is vinculated with the Packing Instructions?
Please letme know if this is possible or if I need to up another issue.
Regards
Omar Perea

How to Change Podcast Category

Our podcast is located here:
http://itunes.apple.com/us/podcast/authorscast/id416884925
When we originally submitted our podcast, we did so using the category "Technology / Tech News."
We have since changed the wording of the summary description slightly, and changed the category tags to just "Technology" (with no subcategory). It is picking up the latest episodes, and even the updated summary, but not the changed category -- it is still stuck in Tech News.
Is there any way, other than changing the category tags in the feed (which we have already done), to get the iTunes store to reclassify our show -- in other words, to honor the change we have made in our category to Technology instead of Tech News.?

Roger, When you say
Yur 'itunes:category' tags actually read:
... how do you view someone's category, and other, tags? I'd like to know how to look at mine. I use iweb to publish and keep my files on apple's mobile me. So I don't have a ton of control over my tags, though I'm working to learn to use the Inspector and also downloaded iweb SEO today so that I can add more keyword tags, body and header too, if and when I have anything to add there. But I don't know how to see what actually gets published
Laurel
feed://web.me.com/simpleromantic/Simple_Romantic/Podcast/rss.xml

How to change the category of system messages in PS

Hi All,
Is it possible to change the category (i.e from information to warning/error) of the system messages like CN707 in PS? If yes how?

Hi,
You will have to go for development. Use userexit CNEX0009.
Refer similar thread:Re: CN707, SE721
Regards
Edited by: Shrikant Rakate on Jan 14, 2009 4:57 PM
Edited by: Shrikant Rakate on Jan 14, 2009 4:58 PM
Edited by: Shrikant Rakate on Jan 15, 2009 12:37 PM
Edited by: Shrikant Rakate on Jan 15, 2009 12:38 PM

HT201304 how to change the region canadian to united state

i live in the united states and my app store doesn't let me download any apps because it says i am in the canadian app store... What do i do to change it back to the united states app store ?

Try this.
Settings>iTunes and App Stores>Apple ID
Tap your ID
Tap View Apple ID
Enter your password
Go to country/region in the popup window to change the store

How to change stock category of handling units at mass level without Development

Similar Messages

Maybe you are looking for